☆ 4.7 Article

Blast performance of 3D-printed auxetic honeycomb sandwich beams

THIN-WALLED STRUCTURES (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Mechanical

Blast response of additive manufactured Ti-6Al-4V sandwich panels

Yuchen Wei et al.

Summary: This study investigates the response of additive manufactured sandwich panels to close-proximity air blast loading through experimental and numerical approaches. The results demonstrate that using designed auxetic honeycomb cores and face sheets can enhance the blast resistance of the panels.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2023)

添加到收藏夹

Article Engineering, Civil

Blast mitigation performance of a novel cladding-connector system

Xuejian Zhang et al.

Summary: A novel cladding-connector system consisting of sacrificial cladding and connectors was proposed to protect vulnerable walls in frame structures from blast loads. The system achieved both high energy absorption and low load transfer. The numerical model was established and validated using compression tests and blast tests. Comparisons between systems with flexible and rigid connectors showed that the system with flexible connectors exhibited superior performance in terms of energy absorption and load transfer, especially under intense blasts. The proposed system with flexible connectors was more promising for effectively protecting existing frame structures against blasts.

THIN-WALLED STRUCTURES (2023)

添加到收藏夹

Correction Mechanics

Insight into the negative Poisson's ratio effect of the gradient auxetic reentrant honeycombs (vol 274, 14366, 2021)

Yujie Shao et al.

COMPOSITE STRUCTURES (2022)

添加到收藏夹

Article Materials Science, Composites

Debonding characteristics and strengthening mechanics of all-CFRP sandwich beams with interface-reinforced honeycomb cores

Xingyu Wei et al.

Summary: The study introduces an interface-reinforced honeycomb core to enhance bonding strength, showing improved performance in transverse and longitudinal directions. Experimental comparisons between traditional honeycomb and the reinforced one were conducted to analyze the impact of loading direction and cell wall thickness on the structures.

COMPOSITES SCIENCE AND TECHNOLOGY (2022)

添加到收藏夹

Article Mechanics

Optimal design of a novel graded auxetic honeycomb core for sandwich beams under bending using digital image correlation (DIC)

Mohammad Hossein Zamani et al.

Summary: This paper presents a novel graded design for an auxetic honeycomb sandwich structure, and the mechanical properties are improved through experiments and numerical analysis.

COMPOSITE STRUCTURES (2022)

添加到收藏夹

Article Engineering, Mechanical

Ballistic characteristics of 3D-printed auxetic honeycomb sandwich panel using CFRP face sheet

Junbo Yan et al.

Summary: This study demonstrated the advantages of auxetic honeycomb sandwich panels in terms of ballistic impact performance. Through experiments and numerical modeling, it was found that the honeycomb core type, unit cell angle, and face-sheets material have significant influences on ballistic resistance, improving the material's ballistic impact performance.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2022)

添加到收藏夹

Article Engineering, Civil

Nonlinear transient analysis of porous P-FGM and S-FGM sandwich plates and shell panels under blast loading and thermal environment

Abhilash Karakoti et al.

Summary: The present work develops a simple and accurate finite element formulation based on C-0 continuity of transverse displacement for obtaining and comparing the nonlinear transient response of porous functionally graded material (FGM) sandwich plates and shell panels. Through validation and parametric studies, it is observed that the amplitude of the nonlinear transient response due to different blast loading can be controlled by selecting optimal parameters.

THIN-WALLED STRUCTURES (2022)

添加到收藏夹

Article Mechanics

Optimal face sheet thickness of 3D printed polymeric hexagonal and re-entrant honeycomb sandwich beams subjected to three-point bending

H. Geramizadeh et al.

Summary: This study reveals the method of designing optimized 3D printed polymeric sandwich beams by utilizing failure mechanisms and establishes the relationship between optimal face sheet thickness and energy absorption capacity through experimental and numerical analysis.

COMPOSITE STRUCTURES (2022)

添加到收藏夹

Article Engineering, Civil

Failure behavior of sandwich beams with glass fiber-reinforced epoxy/aluminum laminates face-sheets and aluminum honeycomb core under three-point bending

Jianxun Zhang et al.

Summary: The failure behavior and energy absorption performance of GLARE sandwich beams with glass fiber-reinforced epoxy/aluminum laminates are studied experimentally and numerically. The results show that increasing the face-sheet and honeycomb core thickness, reducing the honeycomb cell size, etc. can improve the load-carrying capacity and energy absorption of the sandwich beams.

THIN-WALLED STRUCTURES (2022)

添加到收藏夹

Article Engineering, Civil

Experimental study on damage magnification effect of lightweight auxetic honeycomb protective panels under close-in blast loads

Dulara Kalubadanage et al.

Summary: This study experimentally evaluated the effectiveness of re-entrant honeycomb core sandwich protective panel systems in protecting reinforced concrete slabs subjected to blast loads. The results showed that these protective systems can significantly enhance the blast impulse transmitted to the main structure.

THIN-WALLED STRUCTURES (2022)

添加到收藏夹

Article Engineering, Civil

Anti-blast performance of 3D-printed sandwich panels with auxetic hexagonal and regular hexagonal honeycomb cores

Zichen Yan et al.

Summary: This study investigates the blast response of HSPs developed using auxetic hexagonal honeycomb cores through experimental and numerical analysis. Results show that employing auxetic honeycomb cores can significantly enhance the blast resistance of HSPs, as confirmed by both experimental and numerical studies.

ENGINEERING STRUCTURES (2022)

添加到收藏夹

Article Engineering, Civil

Bending response and energy absorption of sandwich beams with novel auxetic honeycomb core

Xuan Zhao et al.

Summary: The study focuses on the bending response and energy absorption of the star-triangular honeycomb core (STH-C) and sandwich beam with an STH-C (STH-SW), showing that structural parameters significantly influence the load-bearing capacity of the sandwich beams, especially the thickness-to-length ratio t/l.

ENGINEERING STRUCTURES (2021)

添加到收藏夹

Article Engineering, Mechanical

Close-in blast resistance of large-scale auxetic re-entrant honeycomb sandwich panels

Dulara Kalubadanage et al.

Summary: The study focuses on sacrificial cladding systems based on negative Poisson's ratio core topologies as a protective technology for critical infrastructure. Both experimental and numerical results show that these systems exhibit good energy absorption capabilities under blast loads. The deformation pattern and negative Poisson's ratio of the system vary with blast loading intensity, and careful design is required to prevent overloading under different blast threats.

JOURNAL OF SANDWICH STRUCTURES & MATERIALS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Mechanical Characteristics of Superimposed 316L Lattice Structures under Static and Dynamic Loading

Chao Chang et al.

Summary: Additive manufacturing of stainless steel 316 L lattice structures using selective laser melting shows potential for energy absorption in engineering applications. Experimental testing and numerical simulations demonstrate that the vertical truss in the lattice plays a critical role in compression, leading to superior energy absorption capacity in superimposed structures compared to other lattice designs. This research provides new insights for the design of lattice structures in various engineering applications.

ADVANCED ENGINEERING MATERIALS (2021)

添加到收藏夹

Article Engineering, Mechanical

Numerical study of the ultrasonic impact on additive manufactured parts

Changping Zhou et al.

Summary: A hybrid fabrication method combining AM and UIT techniques was developed to improve the microstructure and mechanical properties of additive manufactured metal parts. Experimental and numerical methods were conducted to analyze the stress and strain fields of ultrasonic impact on additive manufactured parts. Both experimental and numerical results confirm that UIT can effectively improve the performance of additive manufactured metal parts.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2021)

添加到收藏夹

Article Engineering, Multidisciplinary

Optimal design of a novel cylindrical sandwich panel with double arrow auxetic core under air blast loading

Xu-ke Lan et al.

DEFENCE TECHNOLOGY (2020)

添加到收藏夹

Article Engineering, Civil

Experimental and numerical investigation of rectangular reinforced concrete columns under contact explosion effects

Alok Dua et al.

ENGINEERING STRUCTURES (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Mechanical responses of 3D cross-chiral auxetic materials under uniaxial compression

Qingsong Wang et al.

MATERIALS & DESIGN (2020)

添加到收藏夹

Article Engineering, Mechanical

Multiaxial fatigue of LB-PBF additive manufactured 17-4 PH stainless steel including the effects of surface roughness and HIP treatment and comparisons with the wrought alloy

Reza Molaei et al.

INTERNATIONAL JOURNAL OF FATIGUE (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Bending characteristics of all-composite hexagon honeycomb sandwich beams: experimental tests and a three-dimensional failure mechanism map

Xingyu Wei et al.

MECHANICS OF MATERIALS (2020)

添加到收藏夹

Article Engineering, Chemical

Re-entrant auxetic structures fabricated by fused deposition modeling: An experimental study of influence of process parameters under compressive loading

Swapnil Vyavahare et al.

POLYMER ENGINEERING AND SCIENCE (2020)

添加到收藏夹

Article Engineering, Multidisciplinary

Large deformation and energy absorption of additively manufactured auxetic materials and structures: A review

Jianjun Zhang et al.

COMPOSITES PART B-ENGINEERING (2020)

添加到收藏夹

Article Mechanics

Blast response study of the sandwich composite panels with 3D chiral auxetic core

Nejc Novak et al.

COMPOSITE STRUCTURES (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

The structure response of sandwich beams with metallic auxetic honeycomb cores under localized impulsive loading-experiments and finite element analysis

Dengbao Xiao et al.

MATERIALS & DESIGN (2019)

添加到收藏夹

Article Mechanics

3D printed architected polymeric sandwich panels: Energy absorption and structural performance

H. Yazdani Sarvestani et al.

COMPOSITE STRUCTURES (2018)

添加到收藏夹

Article Mechanics

Blast resistance of auxetic and honeycomb sandwich panels: Comparisons and parametric designs

Gabriele Imbalzano et al.

COMPOSITE STRUCTURES (2018)

添加到收藏夹

Review Instruments & Instrumentation

Auxetic metamaterials and structures: a review

Xin Ren et al.

SMART MATERIALS AND STRUCTURES (2018)

添加到收藏夹

Article Engineering, Civil

Numerical study of sandwich panel with a new bi-directional Load-Self-Cancelling (LSC) core under blast loading

Zhejian Li et al.

THIN-WALLED STRUCTURES (2018)

添加到收藏夹

Article Engineering, Civil

Dynamic crushing response of auxetic honeycombs under large deformation: Theoretical analysis and numerical simulation

L. L. Hu et al.

THIN-WALLED STRUCTURES (2018)

添加到收藏夹

Article Engineering, Mechanical

High-velocity impact behaviour of aluminium honeycomb sandwich panels with different structural configurations

Guangyong Sun et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2018)

添加到收藏夹

Article Engineering, Mechanical

Three-point bending of honeycomb sandwich beams with facesheet perforations

Pengbo Su et al.

ACTA MECHANICA SINICA (2018)

添加到收藏夹

Article Engineering, Civil

Influence of cylindrical charge orientation on the blast response of high strength concrete panels

Satadru Das Adhikary et al.

ENGINEERING STRUCTURES (2017)

添加到收藏夹

Article Engineering, Mechanical

Blast response of geometrically asymmetric metal honeycomb sandwich plate: Experimental and theoretical investigations

Tao Wang et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2017)

添加到收藏夹

Article Mechanics

Impact and close-in blast response of auxetic honeycomb-cored sandwich panels: Experimental tests and numerical simulations

Chang Qi et al.

COMPOSITE STRUCTURES (2017)

添加到收藏夹

Article Engineering, Multidisciplinary

Dynamic response of sandwich structures with graded auxetic honeycomb cores under blast loading

Xiaochao Jin et al.

COMPOSITES PART B-ENGINEERING (2016)

添加到收藏夹

Article Engineering, Mechanical

Response of aluminium honeycomb sandwich panels subjected to foam projectile impact - An experimental study

M. A. Yahaya et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2015)

添加到收藏夹

Article Nanoscience & Nanotechnology

Constitutive and failure behaviour in selective laser melted stainless steel for microlattice structures

Peifeng Li

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)

添加到收藏夹

Article Engineering, Mechanical

A simplified analytical model for metal sandwich beam with soft core under impulsive loading over a central patch

Qinghua Qin et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2014)

添加到收藏夹

Article Engineering, Mechanical

Response of clamped sandwich beams subjected to high-velocity impact by sand slugs

T. Uth et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2014)

添加到收藏夹

Article Engineering, Mechanical

The impact response of clamped sandwich beams with ordinary and hierarchical cellular cores

T. Yi et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2012)

添加到收藏夹

Article Engineering, Mechanical

The soft impact of composite sandwich beams with a square-honeycomb core

B. P. Russell et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2012)

添加到收藏夹

Article Engineering, Mechanical

The influence of core density on the blast resistance of foam-based sandwich structures

M. Z. Hassan et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2012)

添加到收藏夹

Article Mechanics

The structural response of clamped sandwich beams subjected to impact loading

Zhihua Wang et al.

COMPOSITE STRUCTURES (2011)

添加到收藏夹

Article Engineering, Mechanical

Some theoretical considerations on the dynamic response of sandwich structures under impulsive loading

Feng Zhu et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2010)

添加到收藏夹

Article Engineering, Mechanical

Simulation of the response of fibre-metal laminates to localised blast loading

D. Karagiozova et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2010)

添加到收藏夹

Article Engineering, Mechanical

The Response of Honeycomb Core Sandwich Panels, with Aluminum and Composite Face Sheets, to Blast Loading

G. S. Langdon et al.

JOURNAL OF SANDWICH STRUCTURES & MATERIALS (2010)

添加到收藏夹

Article Materials Science, Multidisciplinary

The influence of core height and face plate thickness on the response of honeycomb sandwich panels subjected to blast loading

Y. Chi et al.

MATERIALS & DESIGN (2010)

添加到收藏夹

Article Mechanics

Behaviour of sandwich panels subjected to intense air blast - Part 1: Experiments

G. N. Nurick et al.

COMPOSITE STRUCTURES (2009)

添加到收藏夹

Article Mechanics

A theoretical analysis of the dynamic response of metallic sandwich beam under impulsive loading

Qing Hua Qin et al.

EUROPEAN JOURNAL OF MECHANICS A-SOLIDS (2009)

添加到收藏夹

Article Materials Science, Composites

Failure characterisation of blast-loaded fibre-metal laminate panels based on aluminium and glass-fibre reinforced polypropylene

G. S. Langdon et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2007)

添加到收藏夹

Article Materials Science, Multidisciplinary

The impulsive response of sandwich beams: Analytical and numerical investigation of regimes of behaviour

M. T. Tilbrook et al.

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2006)

添加到收藏夹

Article Mechanics

The resistance of clamped sandwich beams to shock loading

NA Fleck et al.

JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME (2004)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.