☆ 4.7 Article

Wear resistance of TiB/Ti composite coating fabricated by TIG cladding using Ti-TiB2 cored wire

SURFACE & COATINGS TECHNOLOGY (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Review Materials Science, Multidisciplinary

A Review on Sustainable Manufacturing of Ceramic-Based Thin Films by Chemical Vapor Deposition (CVD): Reactions Kinetics and the Deposition Mechanisms

M. Sabzi et al.

Summary: Chemical Vapor Deposition (CVD) is a process where a solid is formed on a substrate through chemical reactions in the vapor phase. It allows for the coating of various materials, such as ceramic nanocomposites, dielectrics, and single crystalline silicon, onto different substrates. The design of a CVD system is influenced by factors like substrate dimensions, temperature, chemical composition, deposition process, chamber temperature, material purity, and production economics. Surface reaction kinetics, mass transfer reactions, and desorption reactions are involved in the CVD process. Thermodynamically, CVD requires high temperatures and low pressures. Kinetic control is used at low temperatures, while diffusion control is applied at high temperatures. Coatings in CVD are typically deposited at temperatures ranging from 900 to 1400 degrees Celsius. By controlling chamber temperature, precursor purity, and precursor flow rate, it is possible to partially control deposition rate and microstructure of ceramic coatings during the CVD process.

COATINGS (2023)

添加到收藏夹

Article Materials Science, Ceramics

Wire arc additive manufacturing of network microstructure (TiB+TiC)/Ti6Al4V composites using flux-cored wires

Zhuorui Wang et al.

Summary: In this study, a Wire Arc Additive Manufacturing (WAAM) process using flux-cored wire was developed to fabricate Ti6Al4V matrix composites reinforced with TiB and TiC particles. The introduction of reinforcement resulted in the formation of a refined net-basket-dominated (alpha+beta)-Ti matrix and a stable network microstructure. The microhardness of the samples increased with increasing reinforcement fraction, but the wear resistance decreased in the 10 wt% sample due to the reduced ductility.

CERAMICS INTERNATIONAL (2023)

添加到收藏夹

Article Materials Science, Multidisciplinary

The influence of austenitization temperature on microstructural developments, mechanical properties, fracture mode and wear mechanism of Hadfield high manganese steel

H. R. Jafarian et al.

Summary: The effect of austenitization temperature on a high carbon Hadfield steel was investigated, revealing that increasing temperature reduced carbides and increased grain size while enhancing strength, hardness, and wear resistance at the expense of ductility. Lowering the austenitization temperature increased the share of a ductile fracture mode.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

The influence of aluminum on microstructure, mechanical properties and wear performance of Fe-14%Mn-1.05%C manganese steel

S. H. Mousavi Anijdan et al.

Summary: Increasing the Al content in the Fe-14%Mn-1.05%C steel led to larger austenite grain size, reduced carbide precipitation, higher yield strength, hardness, and wear resistance but lower tensile strength, ductility, and energy absorption capability. Wear mechanism was identified as abrasive wear in the form of parallel grooves on the worn surfaces. Additionally, increasing Al content decreased friction coefficient, weight loss, and surface damage.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)

添加到收藏夹

Article Materials Science, Coatings & Films

Microstructural evolution, mechanical properties and wear behavior of in-situ TiC-reinforced Ti matrix composite coating by induction cladding

Min Wei et al.

Summary: In this work, in-situ fabrication of TiC/Ti composite coatings was achieved using high-frequency induction heating under an argon atmosphere, and the microstructural evolution, phase changes, mechanical properties, and tribological behavior of the coatings were systematically investigated. The results indicate that the dissolution-precipitation mechanism governs the in-situ growth of TiC reinforcements, and the morphology, dimensions, and distribution of TiC phase in the coatings are strongly influenced by various factors such as the composition of raw powders and crystal structure of TiC.

SURFACE & COATINGS TECHNOLOGY (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

A novel Ti cored wire developed for wire-feed arc deposition of TiB/Ti composite coating

Yang Bao et al.

Summary: A novel Ti cored wire was developed for wire-feed arc deposition of TiB/Ti composite coating to enhance the hardness and wear resistance of Ti alloy. Results showed that increasing welding current improved the coating quality and hardness.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Surface Modification of Titanium and Titanium Alloys: Technologies, Developments, and Future Interests

Lai-Chang Zhang et al.

ADVANCED ENGINEERING MATERIALS (2020)

添加到收藏夹

Article Optics

Laser hot-wire cladding of Co-Cr-W metal cored wire

Zhe Zhang et al.

OPTICS AND LASERS IN ENGINEERING (2020)

添加到收藏夹

Article Engineering, Mechanical

Sliding wear of cold sprayed Ti6Al4V coatings: Effect of porosity and normal load

Venkata Naga Vamsi Munagala et al.

WEAR (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Enrichment of in-situ synthesized WC by partial dissolution of ex-situ eutectoid-structured WC/W2C particle in the coatings produced by laser hot-wire deposition

Shengbin Zhao et al.

MATERIALS LETTERS (2020)

添加到收藏夹

Article Engineering, Industrial

Feasibility study of producing Ni/WC composite coatings by laser deposition with a tubular cored wire

Zhao Shengbin et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2020)

添加到收藏夹

Article Materials Science, Ceramics

Deposition of ceramic nanocomposite coatings by electroplating process: A review of layer-deposition mechanisms and effective parameters on the formation of the coating

Saeid Mersagh Dezfuli et al.

CERAMICS INTERNATIONAL (2019)

添加到收藏夹

Article Engineering, Industrial

Effect of Mo on microstructure and wear resistance of slag-free self-shielded metal-cored welding overlay

Dashuang Liu et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2019)

添加到收藏夹

Review Engineering, Mechanical

Tribology of Ti6Al4V: A review

Jibin T. Philip et al.

FRICTION (2019)

添加到收藏夹

Article Materials Science, Coatings & Films

Structure and properties of composite coatings prepared by electron beam melting with titanium carbide - titanium binder

Maksim Krinitcyn et al.

SURFACE & COATINGS TECHNOLOGY (2019)

添加到收藏夹

Article Engineering, Mechanical

Dry sliding wear performance and behaviour of powder bed fusion processed Ti-6Al-4V alloy

Hua Li et al.

WEAR (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Wire-feed deposition TiB reinforced Ti composite coating: Formation mechanism and tribological properties

Yang Bao et al.

MATERIALS LETTERS (2018)

添加到收藏夹

Article Engineering, Mechanical

Dry sliding wear characteristics of in-situ TiBw/Ti6Al4V composites with different network parameters

Qi An et al.

TRIBOLOGY INTERNATIONAL (2018)

添加到收藏夹

Article Materials Science, Ceramics

Characterization of bioactivity behavior and corrosion responses of hydroxyapatite-ZnO nanostructured coating deposited on NiTi shape memory alloy

Masoud Sabzi et al.

CERAMICS INTERNATIONAL (2018)

添加到收藏夹

Article Chemistry, Physical

In-situ synthesis of TiC/Ti composite coating by high frequency induction cladding

H. L. Yu et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2017)

添加到收藏夹

Article Chemistry, Physical

Investigation on the microstructure, room and high temperature mechanical behaviors and strengthening mechanisms of the (TiB+TiC)/TC4 composites

Zheng-Yang Hu et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2017)

添加到收藏夹

Article Materials Science, Coatings & Films

Effect of laser surface remelting and low temperature aging treatments on microstructures and surface properties of Ti-55511 alloy

Bei He et al.

SURFACE & COATINGS TECHNOLOGY (2017)

添加到收藏夹

Article Chemistry, Physical

Structure and properties of titanium surface layers after electron beam alloying with powder mixtures containing carbon

O. G. Lenivtseva et al.

APPLIED SURFACE SCIENCE (2015)

添加到收藏夹

Review Materials Science, Multidisciplinary

Microstructurally inhomogeneous composites: Is a homogeneous reinforcement distribution optimal?

L. J. Huang et al.

PROGRESS IN MATERIALS SCIENCE (2015)

添加到收藏夹

Article Engineering, Mechanical

Mapping wear mechanisms of TiC/Ti composite coatings

G. Rasool et al.

WEAR (2015)

添加到收藏夹

Article Engineering, Mechanical

Microstructure and friction/wear behavior of (TiB plus TiC) particulate-reinforced titanium matrix composites

Bong-Jae Choi et al.

WEAR (2014)

添加到收藏夹

Article Engineering, Manufacturing

Laser Deposition of Ti-6Al-4V Wire with WC Powder for Functionally Graded Components

P. K. Farayibi et al.

MATERIALS AND MANUFACTURING PROCESSES (2013)

添加到收藏夹

Article Engineering, Mechanical

Tribo-layer and its role in dry sliding wear of Ti-6Al-4V alloy

Y. S. Mao et al.

WEAR (2013)

添加到收藏夹

Article Materials Science, Coatings & Films

Effect of heat input on the microstructure of in-situ synthesized TiN-TiB/Ti based composite coating by laser cladding

M. Li et al.

SURFACE & COATINGS TECHNOLOGY (2012)

添加到收藏夹

Article Materials Science, Coatings & Films

Tribological properties of duplex plasma oxidised, nitrided and PVD coated Ti-6Al-4V

G. Cassar et al.

SURFACE & COATINGS TECHNOLOGY (2011)

添加到收藏夹

Article Materials Science, Coatings & Films

The influence of combined laser parameters on in-situ formed TiC morphology during laser cladding

Ali Emamian et al.

SURFACE & COATINGS TECHNOLOGY (2011)

添加到收藏夹

Article Engineering, Mechanical

Friction and wear behavior of titanium matrix (TiB plus TiC) composites

I. Y. Kim et al.

WEAR (2011)

添加到收藏夹

Article Engineering, Mechanical

The effects of laser peening and shot peening on fretting fatigue in Ti-6Al-4V coupons

Kevin K. Liu et al.

TRIBOLOGY INTERNATIONAL (2009)

添加到收藏夹

Article Nanoscience & Nanotechnology

Laser surface hardening of titanium-titanium boride (Ti-TiB) metal matrix composite

P. Chandrasekar et al.

SCRIPTA MATERIALIA (2007)

添加到收藏夹

Article Materials Science, Multidisciplinary

Processing and properties of titanium-titanium boride (TiBw) matrix composites -: a review

K. Morsi et al.

JOURNAL OF MATERIALS SCIENCE (2007)

添加到收藏夹

Article Materials Science, Multidisciplinary

Microstructure and properties of TiB/Ti-6Al-4V coatings produced with laser treatments

D Galvan et al.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2004)

添加到收藏夹

Article Materials Science, Multidisciplinary

Titanium alloys for aerospace applications

M Peters et al.

ADVANCED ENGINEERING MATERIALS (2003)

添加到收藏夹

Article Materials Science, Multidisciplinary

Synthesis of ductile titanium-titanium boride (Ti-TiB) composites with a beta-titanium matrix: The nature of TiB formation and composite properties

KB Panda et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2003)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of self-accommodation on α/α boundary populations in pure titanium

SC Wang et al.

ACTA MATERIALIA (2003)

添加到收藏夹

Article Materials Science, Multidisciplinary

The evolution of microstructure in a laser clad TiB-Ti composite coating

BJ Kooi et al.

ACTA MATERIALIA (2003)

添加到收藏夹

Article Nanoscience & Nanotechnology

Microstructural modification and hardness improvement in boride/Ti-6A1-4V surface-alloyed materials fabricated by high-energy electron beam irradiation

K Euh et al.

SCRIPTA MATERIALIA (2001)

添加到收藏夹

Article Engineering, Mechanical

On the significance of the H/E ratio in wear control:: a nanocomposite coating approach to optimised tribological behaviour

A Leyland et al.

WEAR (2000)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.