☆ 4.7 Article

Extrusion-based 3D-concrete-printing with different flow direction

CONSTRUCTION AND BUILDING MATERIALS (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Construction & Building Technology

Tensile performance of 3D-printed Strain-Hardening Cementitious Composites (SHCC) considering material parameters, nozzle size and printing pattern

Nuoyan Xu et al.

Summary: This study investigates the tensile performance of 3D-printed Strain-Hardening Cementitious Composites (SHCC) and the effects of nanoclay dosage, fiber content, nozzle size, and printing patterns. The results show that the tensile properties of 3D-printed SHCC can be controlled through the design of printing patterns, and properly designed printed SHCC exhibits better performance.

CEMENT & CONCRETE COMPOSITES (2022)

添加到收藏夹

Article Construction & Building Technology

Effect of shaping plate apparatus on mechanical properties of 3D printed cement-based materials: Experimental and numerical studies

Tinghong Pan et al.

Summary: This study achieved precise control of the shape of 3D printed cement-based structures, elimination of curved sides and internal stress concentration, and enhancement of mechanical properties through a specially designed shaping plate apparatus. Results show that the shaping plate apparatus effectively constrains the expansion of extrudate, improves the surface finish quality and mechanical properties of the printed structure.

CEMENT AND CONCRETE RESEARCH (2022)

添加到收藏夹

Article Construction & Building Technology

Interlayer bonding investigation of 3D printing cementitious materials with fluidity-retaining polycarboxylate superplasticizer and high-dispersion polycarboxylate superplasticizer

Tinghong Pan et al.

Summary: This study investigates the rheological properties and time-varying characteristics of 3D printing cementitious materials using different types of polycarboxylate superplasticizers. The results show that the fluidity-retaining polycarboxylate superplasticizer (FR-PC) significantly improves the fluidity-retention ability and thixotropy of the fresh pastes, as well as the interlayer bonding strength.

CONSTRUCTION AND BUILDING MATERIALS (2022)

添加到收藏夹

Article Construction & Building Technology

Assessing the fresh properties of printable cement-based materials: High potential tests for quality control

Roussel Nicolas et al.

Summary: This study aims to present some tests for measuring the rheological properties of printable materials and discuss the remaining research questions.

CEMENT AND CONCRETE RESEARCH (2022)

添加到收藏夹

Article Construction & Building Technology

Additive Manufacturing using mobile robots: Opportunities and challenges for building construction

Kathrin Dorfler et al.

Summary: In situ Additive Manufacturing (AM) has gained attention due to the need for productive and sustainable methods in the concrete construction industry. Mobile Additive Manufacturing (MAM) systems show potential for scalability in construction sites through the cooperation of multiple mobile robots.

CEMENT AND CONCRETE RESEARCH (2022)

添加到收藏夹

Article Construction & Building Technology

How do the contact surface forces affect the interlayer bond strength of 3D printed mortar?

Tinghong Pan et al.

Summary: This paper analyzes the contact surface forces and interlayer bond strength of double-layer printed structures in 3D printed mortar. The study finds that the nozzle stand-off distance and travel speed of the nozzle directly affect the contact surface forces.

CEMENT & CONCRETE COMPOSITES (2022)

添加到收藏夹

Review Engineering, Environmental

A sustainable roadmap for additive manufacturing using geopolymers in construction industry

Muhammad Huzaifa Raza et al.

Summary: This article investigates the sustainability assessment of 3D printed geopolymers and identifies issues regarding productivity, economic influence, environmental burden, and social impact. Despite reasonable productivity, the use of alkaline reagents leads to inadequate economic and environmental performance. However, 3D printed geopolymers have significant social impacts.

RESOURCES CONSERVATION AND RECYCLING (2022)

添加到收藏夹

Article Construction & Building Technology

Flow and deformation behaviors of cementitious materials through nozzles with different geometric parameters: Experimental and numerical approaches

Tinghong Pan et al.

Summary: Nozzle geometric parameters play a crucial role in controlling the flow and deformation behaviors of printed filament. This study investigated the effects of various geometric characteristics of nozzles on the flow and deformation behavior of printing ink through experiments and computational fluid dynamics (CFD) simulation. The results showed that the extrusion pressure can be reduced by increasing the area ratio of outlet to inlet and changing the direction of material deposition. Moreover, the deformation rate of deposited filament can be minimized by increasing the nozzle aspect ratio and decreasing the direction of material deposition. These findings provide theoretical guidance for the design and selection of nozzles before the printing process.

CONSTRUCTION AND BUILDING MATERIALS (2022)

添加到收藏夹

Article Construction & Building Technology

Printability assessment of cement-based materials based on rheology, hydration kinetics, and viscoelastic properties

Ilhame Harbouz et al.

Summary: The goal of designing printable cement-based materials is to achieve specific properties to meet performance criteria. Suitable mixture design is crucial for successful 3D printing and good structural performance. The properties of the investigated mixtures were evaluated to establish recommendations for selecting a mixture with targeted properties for successful printing and adequate structural performance.

CONSTRUCTION AND BUILDING MATERIALS (2022)

添加到收藏夹

Review Construction & Building Technology

A review of 3D printed concrete: Performance requirements, testing measurements and mix design

Shaodan Hou et al.

Summary: 3D printed concrete (3DPC) plays an important role in the industrialization of the construction industry, but faces challenges such as printing materials and different performance requirements in applications. The study emphasizes the printability, mechanical properties, and durability requirements of 3DPC, and the need for specialized testing methods and more accurate testing standards for 3DPC structures.

CONSTRUCTION AND BUILDING MATERIALS (2021)

添加到收藏夹

Article Chemistry, Physical

Effect of Structural Build-Up on Interlayer Bond Strength of 3D Printed Cement Mortars

Tinghong Pan et al.

Summary: Understanding the relationship between material properties and printability, controlling material characteristics through additives, and proposing a new parameter, maximum operational time (MOT), to ensure high interlayer bond strength are essential in digital concrete additive manufacturing. The use of nano clay and TS composite can reduce moisture loss, prevent weak interface layer formation, and enhance interlayer bond strength. This research contributes new insights into designing 3D-printed ink with good extrudability, buildability, and interlayer bond strength.

MATERIALS (2021)

添加到收藏夹

Article Construction & Building Technology

Effect of polycarboxylate ether (PCE) superplasticizer on thixotropic structural build-up of fresh cement pastes over time

Ye Qian

Summary: This study investigates the effects of PCE on flowability and structural build-up of cement pastes in fresh states. Results show that at low dosage of PCE addition, there is a higher rate of structural build-up, highlighting the importance of attention in this area.

CONSTRUCTION AND BUILDING MATERIALS (2021)

添加到收藏夹

Article Engineering, Multidisciplinary

3D concrete printer parameter optimisation for high rate digital construction avoiding plastic collapse

Jacques Kruger et al.

COMPOSITES PART B-ENGINEERING (2020)

添加到收藏夹

Article Engineering, Multidisciplinary

Modelling and parameter optimization for filament deformation in 3D cementitious material printing using support vector machine

Zhixin Liu et al.

COMPOSITES PART B-ENGINEERING (2020)

添加到收藏夹

Article Construction & Building Technology

Yield stress and thixotropy control of 3D-printed calcium sulfoaluminate cement composites with metakaolin related to structural build-up

Mingxu Chen et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

添加到收藏夹

Article Construction & Building Technology

Modelling of 3D concrete printing based on computational fluid dynamics

Raphael Comminal et al.

CEMENT AND CONCRETE RESEARCH (2020)

添加到收藏夹

Article Construction & Building Technology

Effect of printing parameters on interlayer bond strength of 3D printed limestone-calcined clay-based cementitious materials: An experimental and numerical study

Yu Chen et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

添加到收藏夹

Article Construction & Building Technology

Mixture Design Approach to optimize the rheological properties of the material used in 3D cementitious material printing

Zhixin Liu et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

添加到收藏夹

Article Construction & Building Technology

Rheological and harden properties of the high-thixotropy 3D printing concrete

Yu Zhang et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

添加到收藏夹

Article Construction & Building Technology

Hardened properties of 3D printed concrete: The influence of process parameters on interlayer adhesion

R. J. M. Wolfs et al.

CEMENT AND CONCRETE RESEARCH (2019)

添加到收藏夹

Article Chemistry, Physical

The Effect of Material Fresh Properties and Process Parameters on Buildability and Interlayer Adhesion of 3D Printed Concrete

Biranchi Panda et al.

MATERIALS (2019)

添加到收藏夹

Article Engineering, Industrial

Effect of printing parameters in 3D concrete printing: Printing region and support structures

Yi Wei Daniel Tay et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2019)

添加到收藏夹

Article Construction & Building Technology

3D concrete printing: A lower bound analytical model for buildability performance quantification

Jacques Kruger et al.

AUTOMATION IN CONSTRUCTION (2019)

添加到收藏夹

Article Construction & Building Technology

Large-scale digital concrete construction-CONPrint3D concept for on-site, monolithic 3D-printing

Viktor Mechtcherine et al.

AUTOMATION IN CONSTRUCTION (2019)

添加到收藏夹

Article Construction & Building Technology

Rheological behavior of Portland clinker-calcium sulphoaluminate clinker-anhydrite ternary blend

Tingjie Huang et al.

CEMENT & CONCRETE COMPOSITES (2019)

添加到收藏夹

Article Engineering, Multidisciplinary

Printability region for 3D concrete printing using slump and slump flow test

Yi Wei Daniel Tay et al.

COMPOSITES PART B-ENGINEERING (2019)

添加到收藏夹

Article Engineering, Manufacturing

Time gap effect on bond strength of 3D-printed concrete

Yi Wei Daniel Tay et al.

VIRTUAL AND PHYSICAL PROTOTYPING (2019)

添加到收藏夹

Article Engineering, Civil

Fresh and hardened properties of 3D printable cementitious materials for building and construction

Suvash Chandra Paul et al.

ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING (2018)

添加到收藏夹

Article Construction & Building Technology

Distinguishing dynamic and static yield stress of fresh cement mortars through thixotropy

Ye Qian et al.

CEMENT & CONCRETE COMPOSITES (2018)

添加到收藏夹

Article Construction & Building Technology

Effect of polycarboxylate ether superplasticizer (PCE) on dynamic yield stress, thixotropy and flocculation state of fresh cement pastes in consideration of the Critical Micelle Concentration (CMC)

Ye Qian et al.

CEMENT AND CONCRETE RESEARCH (2018)

添加到收藏夹

Article Construction & Building Technology

3D printing using concrete extrusion: A roadmap for research

R. A. Buswell et al.

CEMENT AND CONCRETE RESEARCH (2018)

添加到收藏夹

Article Construction & Building Technology

Enhancing thixotropy of fresh cement pastes with nanoclay in presence of polycarboxylate ether superplasticizer (PCE)

Ye Qian et al.

CEMENT AND CONCRETE RESEARCH (2018)

添加到收藏夹

Article Construction & Building Technology

Printable properties of cementitious material containing copper tailings for extrusion based 3D printing

Guowei Ma et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

添加到收藏夹

Article Engineering, Multidisciplinary

Measurement of tensile bond strength of 3D printed geopolymer mortar

Biranchi Panda et al.

MEASUREMENT (2018)

添加到收藏夹

Review Engineering, Mechanical

A review of 3D concrete printing systems and materials properties: current status and future research prospects

Suvash Chandra Paul et al.

RAPID PROTOTYPING JOURNAL (2018)

添加到收藏夹

Article Chemistry, Physical

Developing and Testing of Strain-Hardening Cement-Based Composites (SHCC) in the Context of 3D-Printing

Hiroki Ogura et al.

MATERIALS (2018)

添加到收藏夹

Article Construction & Building Technology

Investigation of the rheology and strength of geopolymer mixtures for extrusion-based 3D printing

Biranchi Panda et al.

CEMENT & CONCRETE COMPOSITES (2018)

添加到收藏夹

Article Engineering, Manufacturing

Design of a 3D printed concrete bridge by testing

Theo A. M. Salet et al.

VIRTUAL AND PHYSICAL PROTOTYPING (2018)

添加到收藏夹

Review Engineering, Manufacturing

3D printing trends in building and construction industry: a review

Yi Wei Daniel Tay et al.

VIRTUAL AND PHYSICAL PROTOTYPING (2017)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.