☆ 4.7 Article

Peridynamic modeling of step-path failure in rock slopes

COMPUTERS AND GEOTECHNICS (2024)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Mechanics

A peridynamic differential operator-based scheme for the extended bond-based peridynamics and its application to fracture problems of brittle solids

Tao Ni et al.

Summary: An extended bond-based peridynamic (XBB-PD) model was developed to describe the mechanical behavior of solids with arbitrary Poisson's ratio values, taking both the bond longitudinal and tangential deformations into account. In this study, a peridynamic differential operator based implementation scheme is presented for the XBB-PD model. An energy-based failure criterion is introduced to describe failure and crack propagation in brittle solids. The proposed approach is validated through elastic examples and numerical simulations of crack propagation problems, showing good agreement with reference results.

EUROPEAN JOURNAL OF MECHANICS A-SOLIDS (2023)

添加到收藏夹

Article Engineering, Multidisciplinary

An extended peridynamic model equipped with a new bond-breakage criterion for mixed-mode fracture in rock-like materials

Wen Wang et al.

Summary: This paper presents a numerical model for simulating mixed-mode fracture in rock-like materials using a two-parameter extended bond-based peridynamics. The model incorporates a new bond-breakage criterion and requires only four basic parameters. Experimental validation is conducted on gypsum specimens, demonstrating good agreement between the numerical and experimental results.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2023)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Numerical simulation of interfacial and subinterfacial crack propagation by using extended peridynamics

Wen Wang et al.

Summary: This paper investigates the interaction between crack propagation and interfaces in bimaterial systems through simulated interfacial and subinterfacial fracture behaviors. A modeling approach using the extended bond-based peridynamic model is introduced and validated through a convergence study. The results show that the proposed method satisfactorily captures the interplay between interfaces and crack propagation, and an equilibrium state of mode-I crack growth is successfully obtained in the subinterfacial fracture case.

COMPUTERS & STRUCTURES (2023)

添加到收藏夹

Article Engineering, Mechanical

Experimental and numerical study of step-path failure in jointed rocks

Jun Xu et al.

Summary: Experimental and numerical methods were used to study the failure process and mechanism of step-path failure in jointed rocks. A damage evolution model was proposed to simulate the initiation, propagation, and coalescence of cracks, showing a good agreement with test results. The main cause of step-path failure was found to be brittle fractures caused by tensile stress, interacting with natural discontinuities to form shear planes. Shear cracks also played a significant role in accelerating the step-path failure process. The results provide insight into the stability of jointed rocks and can be applied to analyze the stability of rock structures and masses.

THEORETICAL AND APPLIED FRACTURE MECHANICS (2023)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Simulating the entire progressive failure process of rock slopes using the combined finite-discrete element method

Lei Sun et al.

Summary: This paper presents a novel approach (Y-slope) to simulate the entire failure process of rock slopes, including initiation, transport, and deposition. The method can not only evaluate the stability state of the slope and obtain the critical failure surface, but also accurately simulate the slope deformation, failure surface evolution, block transport, and deposition. The importance of existing discontinuities in slope stability and failure mechanism is also highlighted.

COMPUTERS AND GEOTECHNICS (2022)

添加到收藏夹

Article Geochemistry & Geophysics

Failure of Rock Slopes with Intermittent Joints: Failure Process and Stability Calculation Models

Zihan Zhou et al.

Summary: This study investigated rock slopes with intermittent joints in open-pit mines using speckle technique and plastic limit analysis theory, and found conclusions on failure features, joint failure types, factors influencing slope stability, and instability of local-stable slopes higher than critical instability height.

LITHOSPHERE (2022)

添加到收藏夹

Article Geosciences, Multidisciplinary

Investigation of the role of crown crack in cohesive soil slope and its effect on slope stability based on the extended finite element method

Yiding Bao et al.

Summary: This study investigated the role of crown cracks in soil slopes using XFEM and found that cracks have a significant impact on slope stability, especially when they are located in the tension zone. Stress variation analysis showed that the slope is under compressive stress, with the extent of the tension zone restricted by slope failure. The implementation of XFEM in slope stability analysis can be useful for assessing soil tensile strength and predicting slope failure-related disasters.

NATURAL HAZARDS (2022)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

The role of discontinuities in rock slope stability: Insights from a combined finite-discrete element simulation

Lei Sun et al.

Summary: This paper develops a jointed rock slope analysis model based on the combined finite discrete element method, and validates its accuracy and robustness through numerical tests. The study investigates the failure mechanism and process of rock slopes with different types of discontinuities, providing a promising tool for understanding and predicting the progressive failure process of jointed rock slopes.

COMPUTERS AND GEOTECHNICS (2022)

添加到收藏夹

Article Engineering, Multidisciplinary

The extended peridynamic model for elastoplastic and/or fracture problems

Wei-Jian Li et al.

Summary: The strain-based extended peridynamic model (XPDM) is extended to include bond breakage and/or plasticity mechanisms. Experimental results show that the incorporation of a shear mechanism is necessary to accurately model mixed mode fracture behavior.

INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING (2022)

添加到收藏夹

Article Engineering, Mechanical

Numerical estimate of critical failure surface of slope by ordinary state-based peridynamic plastic model

Ting Zhang et al.

Summary: This paper proposes a method that combines the OSB-PD plastic model with the D-P criterion to numerically reproduce localized deformation and locate the critical failure surface of slopes. The strength reduction method is used to estimate the critical failure surface and factor of safety.

ENGINEERING FAILURE ANALYSIS (2022)

添加到收藏夹

Review Engineering, Mechanical

State-of-the-Art Review on the Progressive Failure Characteristics of Geomaterials in Peridynamic Theory

Xiao-Ping Zhou et al.

Summary: Peridynamic theory, an integral-type nonlocal continuum mechanics theory, has been successfully used to simulate mechanical responses of materials with discontinuous structures and demonstrate various discontinuous phenomena in engineering and sciences. The review illustrates the successful results and potential capability of PD theory in geotechnical engineering, showing its applications and future research perspectives in this field.

JOURNAL OF ENGINEERING MECHANICS (2021)

添加到收藏夹

Article Engineering, Geological

Fractures: Tension and Shear

Herbert H. Einstein

Summary: This paper applies the observation cycle to rock fracturing processes, revealing the combination of tensile and shear mechanisms on different scales. Emphasizing the importance of combining observation with abstraction, it contributes to a better understanding of rock fracturing processes and highlights the significance of the observation cycle in the scientific process.

ROCK MECHANICS AND ROCK ENGINEERING (2021)

添加到收藏夹

Article Engineering, Multidisciplinary

Double-phase-field formulation for mixed-mode fracture in rocks

Fan Fei et al.

Summary: The proposed double-phase-field formulation combines two different phase fields to describe cohesive tensile fracture and frictional shear fracture in rocks. It allows for direct use of material strengths measured from experiments and can naturally distinguish between different fracture modes. The validation results demonstrate the effectiveness of the model in simulating mixed-mode fractures in rocks.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2021)

添加到收藏夹

Article Engineering, Geological

Damage progression and acoustic emission in brittle failure of granite and sandstone

Xiao-Ping Zhou et al.

Summary: This paper experimentally evaluates stress-induced damage progression and acoustic emission in granite and sandstone based on continuous acousto-optic-mechanical observations. Mechanistic correlations among the AOM characteristics in the two rock types are also investigated in detail. The results show significant differences in the AE event rate characteristics and acoustic-optical evidences for process zone nucleation between granite and sandstone.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2021)

添加到收藏夹

Article Engineering, Geological

Study on the dynamic response of dip bedded rock slope using discontinuous deformation analysis (DDA) and shaking table tests

Xixia Feng et al.

Summary: The study on bedded rock slopes under seismic loading suggests that the dynamic response of the slope surface becomes more significant with increasing acceleration amplitude under sinusoidal waves; horizontal loading induces a stronger acceleration response compared to vertical loading.

INTERNATIONAL JOURNAL FOR NUMERICAL AND ANALYTICAL METHODS IN GEOMECHANICS (2021)

添加到收藏夹

Article Engineering, Multidisciplinary

A local strain-based implementation strategy for the extended peridynamic model with bond rotation

Wei-Jian Li et al.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2020)

添加到收藏夹

Article Mechanics

Real-time experiment investigations on the coupled thermomechanical and cracking behaviors in granite containing three pre-existing fissures

Xiao-Ping Zhou et al.

ENGINEERING FRACTURE MECHANICS (2020)

添加到收藏夹

Review Engineering, Civil

Computational methods for fracture in rock: a review and recent advances

Ali Jenabidehkordi

FRONTIERS OF STRUCTURAL AND CIVIL ENGINEERING (2019)

添加到收藏夹

Article Mechanics

A bond-based micropolar peridynamic model with shear deformability: Elasticity, failure properties and initial yield domains

Vito Diana et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2019)

添加到收藏夹

Article Engineering, Multidisciplinary

A modified peridynamics correspondence principle: Removal of zero-energy deformation and other implications

Shubhankar Roy Chowdhury et al.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2019)

添加到收藏夹

Article Engineering, Multidisciplinary

Static solution of crack propagation problems in Peridynamics

Tao Ni et al.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2019)

添加到收藏夹

Article Environmental Sciences

Experimental investigation on the failure mechanism of a rock landslide controlled by a steep-gentle discontinuity pair

Huang Da et al.

JOURNAL OF MOUNTAIN SCIENCE (2019)

添加到收藏夹

Article Engineering, Mechanical

A full orthotropic micropolar peridynamic formulation for linearly elastic solids

Vito Diana et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2019)

添加到收藏夹

Article Geosciences, Multidisciplinary

Experimental investigation of progressive cracking processes in granite under uniaxial loading using digital imaging and AE techniques

Xiao-Ping Zhou et al.

JOURNAL OF STRUCTURAL GEOLOGY (2019)

添加到收藏夹

Article Engineering, Geological

Extended finite element simulation of step-path brittle failure in rock slopes with non-persistent en-echelon joints

Xiaoping Zhou et al.

ENGINEERING GEOLOGY (2019)

添加到收藏夹

Article Mechanics

An improved coupled thermo-mechanic bond-based peridynamic model for cracking behaviors in brittle solids subjected to thermal shocks

Yunteng Wang et al.

EUROPEAN JOURNAL OF MECHANICS A-SOLIDS (2019)

添加到收藏夹

Article Engineering, Multidisciplinary

Possible causes of numerical oscillations in non-ordinary state-based peridynamics and a bond-associated higher-order stabilized model

Xin Gu et al.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2019)

添加到收藏夹

Article Engineering, Geological

Crack Propagation and Coalescence of Step-Path Failure in Rocks

Jun Xu et al.

ROCK MECHANICS AND ROCK ENGINEERING (2019)

添加到收藏夹

Article Engineering, Multidisciplinary

Coupling of FEM meshes with Peridynamic grids

Mirco Zaccariotto et al.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2018)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Discrete modelling jointed rock slopes using mathematical programming methods

J. Meng et al.

COMPUTERS AND GEOTECHNICS (2018)

添加到收藏夹

Article Mechanics

Revisit of non-ordinary state-based peridynamics

Xin Gu et al.

ENGINEERING FRACTURE MECHANICS (2018)

添加到收藏夹

Article Engineering, Civil

Cracking behavior of three types granite with different grain size containing two non-coplanar fissures under uniaxial compression

Wen-Ling Tian et al.

ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING (2018)

添加到收藏夹

Article Engineering, Multidisciplinary

Peridynamic formulations enriched with bond rotation effects

Qi-zhi Zhu et al.

INTERNATIONAL JOURNAL OF ENGINEERING SCIENCE (2017)

添加到收藏夹

Article Engineering, Mechanical

The modeling of crack propagation and coalescence in rocks under uniaxial compression using the novel conjugated bond-based peridynamics

Wang Yunteng et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2017)

添加到收藏夹

Article Engineering, Geological

Numerical Simulation of Failure of Rock-Like Material Subjected to Compressive Loads Using Improved Peridynamic Method

X. P. Zhou et al.

INTERNATIONAL JOURNAL OF GEOMECHANICS (2017)

添加到收藏夹

Article Engineering, Multidisciplinary

Stability of peridynamic correspondence material models and their particle discretizations

S. A. Silling

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2017)

添加到收藏夹

Article Engineering, Multidisciplinary

Dual-horizon peridynamics: A stable solution to varying horizons

Huilong Ren et al.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2017)

添加到收藏夹

Article Engineering, Geological

An Experimental and Numerical Study on Cracking Behavior of Brittle Sandstone Containing Two Non-coplanar Fissures Under Uniaxial Compression

Sheng-Qi Yang et al.

ROCK MECHANICS AND ROCK ENGINEERING (2016)

添加到收藏夹

Article Engineering, Geological

Investigation on Mechanical Behaviors of Sandstone with Two Preexisting Flaws under Triaxial Compression

Da Huang et al.

ROCK MECHANICS AND ROCK ENGINEERING (2016)

添加到收藏夹

Article Engineering, Multidisciplinary

Dual-horizon peridynamics

Huilong Ren et al.

INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING (2016)

添加到收藏夹

Article Mechanics

A DEM analysis of step-path failure in jointed rock slopes

Luc Scholtes et al.

COMPTES RENDUS MECANIQUE (2015)

添加到收藏夹

Article Engineering, Geological

Modeling failure of jointed rock slope with two main joint sets using a novel DEM bond contact model

Mingjing Jiang et al.

ENGINEERING GEOLOGY (2015)

添加到收藏夹

Article Mechanics

Peridynamics for bending of beams and plates with transverse shear deformation

C. Diyaroglu et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2015)

添加到收藏夹

Article Engineering, Geological

Step-path failure of rock slopes with intermittent joints

Da Huang et al.

LANDSLIDES (2015)

添加到收藏夹

Article Mechanics

Application of the numerical manifold method to model progressive failure in rock slopes

Louis Ngai Yuen Wong et al.

ENGINEERING FRACTURE MECHANICS (2014)

添加到收藏夹

Article Engineering, Geological

Simulating the process of reservoir-impoundment-induced landslide using the extended DDA method

Yu-Yong Jiao et al.

ENGINEERING GEOLOGY (2014)

添加到收藏夹

Article Engineering, Multidisciplinary

A two-dimensional ordinary, state-based peridynamic model for linearly elastic solids

Q. V. Le et al.

INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING (2014)

添加到收藏夹

Article Geosciences, Multidisciplinary

Fracture mechanical behavior of red sandstone containing a single fissure and two parallel fissures after exposure to different high temperature treatments

Sheng-Qi Yang et al.

JOURNAL OF STRUCTURAL GEOLOGY (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

An extended constitutive correspondence formulation of peridynamics based on nonlinear bond-strain measures

M. R. Tupek et al.

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2014)

添加到收藏夹

Article Engineering, Geological

Application of the discrete element method for modeling of rock crack propagation and coalescence in the step-path failure mechanism

Luis Arnaldo Mejia Camones et al.

ENGINEERING GEOLOGY (2013)

添加到收藏夹

Article Materials Science, Multidisciplinary

Cracking processes in Barre granite: fracture process zones and crack coalescence

Stephen P. Morgan et al.

INTERNATIONAL JOURNAL OF FRACTURE (2013)

添加到收藏夹

Article Engineering, Geological

Experimental investigation on fracture coalescence behavior of red sandstone containing two unparallel fissures under uniaxial compression

Sheng-Qi Yang et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2013)

添加到收藏夹

Article Engineering, Geological

An Experimental Study of the Fracture Coalescence Behaviour of Brittle Sandstone Specimens Containing Three Fissures

S. Q. Yang et al.

ROCK MECHANICS AND ROCK ENGINEERING (2012)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Application of DDA to simulate characteristics of the Tsaoling landslide

Jian-Hong Wu et al.

COMPUTERS AND GEOTECHNICS (2011)

添加到收藏夹

Article Mechanics

Crack initiation, propagation and coalescence from frictional flaws in uniaxial compression

C. H. Park et al.

ENGINEERING FRACTURE MECHANICS (2010)

添加到收藏夹

Article Engineering, Geological

Crack coalescence in specimens with open and closed flaws: A comparison

C. H. Park et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2009)

添加到收藏夹

Article Engineering, Geological

Crack Coalescence in Molded Gypsum and Carrara Marble: Part 1. Macroscopic Observations and Interpretation

L. N. Y. Wong et al.

ROCK MECHANICS AND ROCK ENGINEERING (2009)

添加到收藏夹

Article Mathematics, Applied

Peridynamics via finite element analysis

Richard W. Macek et al.

FINITE ELEMENTS IN ANALYSIS AND DESIGN (2007)

添加到收藏夹

Article Engineering, Multidisciplinary

Peridynamic states and constitutive modeling

S. A. Silling et al.

JOURNAL OF ELASTICITY (2007)

添加到收藏夹

Article Engineering, Geological

Three-dimensional slope stability analysis by elasto-plastic finite elements

D. V. Griffiths et al.

GEOTECHNIQUE (2007)

添加到收藏夹

Article Nuclear Science & Technology

Peridynamic modeling of concrete structures

Walter Gerstle et al.

NUCLEAR ENGINEERING AND DESIGN (2007)

添加到收藏夹

Article Engineering, Geological

Probabilistic slope stability analysis by finite elements

DV Griffiths et al.

JOURNAL OF GEOTECHNICAL AND GEOENVIRONMENTAL ENGINEERING (2004)

添加到收藏夹

Article Engineering, Geological

Numerical analysis of initiation and progressive failure in natural rock slopes - the 1991 Randa rockslide

E Eberhardt et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2004)

添加到收藏夹

Article Engineering, Geological

Numerical analysis of the stability of heavily jointed rock slopes using PFC2D

C Wang et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2003)

添加到收藏夹

Article Engineering, Geological

Coalescence of multiple flaws in a rock-model material in uniaxial compression

M Sagong et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2002)

添加到收藏夹

Article Engineering, Geological

Analysis of crack coalescence in rock-like materials containing three flaws - Part I: experimental approach

RHC Wong et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2001)

添加到收藏夹

Article Mechanics

The initiation of secondary cracks in compression

A Bobet

ENGINEERING FRACTURE MECHANICS (2000)

添加到收藏夹

Article Engineering, Geological

Modeling of crack initiation, propagation and coalescence in uniaxial compression

B Vásárhelyi et al.

ROCK MECHANICS AND ROCK ENGINEERING (2000)

添加到收藏夹

Article Materials Science, Multidisciplinary

Reformulation of elasticity theory for discontinuities and long-range forces

SA Silling

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2000)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.