☆ 4.5 Article

Research on the macro- and meso-mechanical properties of frozen sand mold based on Hertz-Mindlin with Bonding model

PARTICUOLOGY (2024)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Aerospace

Measurement and calibration of DEM parameters of lunar soil simulant

Jianzhong Zhu et al.

Summary: In this study, the lunar soil simulant parameters were calibrated using the discrete element method (DEM) to accurately simulate the interactions between the rover wheel and lunar soil simulant. Plackett-Burman, steepest ascent, and Box-Behnken experiments were used to propose a parameter calibration methodology. The calibrated parameters were employed for validation tests, and the results showed good agreement with experimental data.

ACTA ASTRONAUTICA (2022)

添加到收藏夹

Article Engineering, Civil

3D DEM investigation of the resistance of ice and frozen granular soils

Guodong Wang et al.

Summary: In this study, a 3D model based on the distinct element method was introduced to evaluate the resistance of frozen soil. Preliminary simulations were performed to calibrate the DEM ice model and assess the relationship between micromechanical parameters and macroscopic behaviour. Triaxial compression and shear simulations were conducted on various ice-soil mixtures to describe and compare the obtained macroscopic behaviour with existing experimental data.

EUROPEAN JOURNAL OF ENVIRONMENTAL AND CIVIL ENGINEERING (2022)

添加到收藏夹

Article Engineering, Chemical

Parameter calibration of coconut bran substrate simulation model based on discrete element and response surface methodology

Liang Zhao et al.

Summary: The physical and simulation experiments were combined to calibrate the parameters of coconut bran discrete element simulation, leading to an optimal combination of parameters. The calibrated parameters can provide references for the selection of coconut bran discrete element simulation parameters and the design and optimization of related equipment.

POWDER TECHNOLOGY (2022)

添加到收藏夹

Article Engineering, Chemical

Calibration of wet sand and gravel particles based on JKR contact model

Jiacheng Zhou et al.

Summary: The parameters of wet sand and gravel particles with different shapes are calibrated based on the JKR contact model. Surface energy and rolling friction coefficient are found to be significant factors affecting the simulation accuracy of wet sand and gravel particles during vibration screening. The non-spherical model and JKR model are proven to better simulate the screening process, and the optimum filling ball radii for different particle shapes are determined.

POWDER TECHNOLOGY (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Calibration of Contact Parameters for Moist Bulk of Shotcrete Based on EDEM

Guanguo Ma et al.

Summary: This study calibrated the contact parameters of the moist bulk of shotcrete accurately and quickly by using a physical stacking test and simulation method. The results showed that the JKR surface energy, rolling friction coefficient, and restitution coefficient significantly affected the angle of repose of the moist bulk of shotcrete. A regression model was established to predict the angle of repose based on these parameters.

ADVANCES IN MATERIALS SCIENCE AND ENGINEERING (2022)

添加到收藏夹

Article Chemistry, Physical

Microscale Modeling of Frozen Particle Fluid Systems with a Bonded-Particle Model Method

Tsz Tung Chan et al.

Summary: An inventive microscale simulation approach using the discrete element method (DEM) and bonded-particle model (BPM) is applied to investigate the mechanics of frozen particle fluid systems (PFS). The study reveals that strain rate significantly affects the mechanical behavior and properties of the agglomerates, leading to the development of a new solid bond model for describing the rheology of the frozen particle fluid systems.

MATERIALS (2022)

添加到收藏夹

Article Construction & Building Technology

Effects of frozen water content and silt fraction on unconfined compressive behavior of fill materials

Sang Yeob Kim et al.

Summary: The mechanical properties of fill materials in extreme regions are primarily determined by the characteristics of ice constituent and soil particles. This study investigated the unconfined compressive behavior of sand-silt mixed fill materials with various frozen water contents and silt fractions. The results showed that frozen water content and void ratio have significant effects on the unconfined compressive strength and stress at maximum curvature point. This study highlights the importance of considering frozen water content, silt fraction, and fracture mode when using sand-silt mixed materials for filling in extreme regions.

CONSTRUCTION AND BUILDING MATERIALS (2021)

添加到收藏夹

Article Engineering, Chemical

An approach to calibration of BPM bonding parameters for iron ore

Zeren Chen et al.

Summary: This study investigates the influence of various factors on the bonded-particle model performances using EDEM software, proposes a calibration method for the bonding parameters, and verifies the reliability and validity of the method through DEM simulation. The compressive strength of the bonded-particle model is found to be jointly determined by critical normal stress and tangential stress.

POWDER TECHNOLOGY (2021)

添加到收藏夹

Review Environmental Sciences

Digitalization to achieve sustainable development goals: Steps towards a Smart Green Planet

Maria E. Mondejar et al.

Summary: Digitalization offers the potential for societal and environmental benefits through access to unexploited big data networks. Smart systems connected to the internet of things present unique opportunities to strategically address challenges related to the United Nations Sustainable Development Goals, ensuring a fair, environmentally sustainable, and healthy society. Additionally, digitalization can contribute to sustainable food-water-energy practices and enhance citizen health and well-being through digital access to care.

SCIENCE OF THE TOTAL ENVIRONMENT (2021)

添加到收藏夹

Article Environmental Sciences

A digital twin of Earth for the green transition

Peter Bauer et al.

Summary: The EU plans to fund the development of digital twins of Earth to support its green transition. By using a methodological framework, they aim to create a new Earth system simulation and observation capability.

NATURE CLIMATE CHANGE (2021)

添加到收藏夹

Article Engineering, Environmental

An elasto-plastic constitutive model for frozen soil subjected to cyclic loading

Dan Wang et al.

Summary: A new elasto-plastic constitutive model was proposed to investigate the dynamic mechanical behaviors and volumetric strain of frozen soil under cyclic loading, and its suitability was confirmed through extensive experimental validation. The model captured basic dynamic characteristics such as nonlinear variation, hysteresis behaviors, and plastic strain accumulation behaviors in stress-strain and volumetric strain curves.

COLD REGIONS SCIENCE AND TECHNOLOGY (2021)

添加到收藏夹

Article Engineering, Chemical

Discrete element simulation of effects of multicontact loading on single particle crushing

Chuanfeng Fang et al.

Particuology (2021)

添加到收藏夹

Article Engineering, Environmental

Modeling soil-bulldozer blade interaction using the discrete element method (DEM)

Mehari Z. Tekeste et al.

JOURNAL OF TERRAMECHANICS (2020)

添加到收藏夹

Article Agricultural Engineering

Scaled-up rice grain modelling for DEM calibration and the validation of hopper flow

Shun Zhang et al.

BIOSYSTEMS ENGINEERING (2020)

添加到收藏夹

Article Energy & Fuels

Experimental study on strength and failure behavior of transversely isotropic rock-like material under uniaxial compression

Peng-Fei Yin et al.

GEOMECHANICS AND GEOPHYSICS FOR GEO-ENERGY AND GEO-RESOURCES (2020)

添加到收藏夹

Article Energy & Fuels

Variations in the physical and mechanical properties of rocks from different depths in the Songliao Basin under uniaxial compression conditions

Yiqiang Lu et al.

GEOMECHANICS AND GEOPHYSICS FOR GEO-ENERGY AND GEO-RESOURCES (2020)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Performance of digital patternless freeze-casting sand mould

Zhong-de Shan et al.

CHINA FOUNDRY (2020)

添加到收藏夹

Article Engineering, Chemical

Calibration of cohesive DEM parameters under rapid flow conditions and low consolidation stresses

Mohsin Ajmal et al.

POWDER TECHNOLOGY (2020)

添加到收藏夹

Article Construction & Building Technology

Uniaxial compression characteristics of railway ballast combined with ice

Jianxing Liu et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Synthesis of silica-based scaffolds with high porosity and controllable microstructure by a sintering-free sol-gel/freeze-casting hybrid method under mild conditions

Haw-Kai Chang et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)

添加到收藏夹

Article Energy & Fuels

Research on the relationship between macroscopic and mesoscopic mechanical parameters of limestone based on Hertz Mindlin with bonding model

Weimin Yang et al.

GEOMECHANICS AND GEOPHYSICS FOR GEO-ENERGY AND GEO-RESOURCES (2020)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Modelling of sand production using a mesoscopic bonded particle lattice Boltzmann method

Min Wang et al.

ENGINEERING COMPUTATIONS (2019)

添加到收藏夹

Article Engineering, Geological

Effect of the clump size for bonded particle model on the uniaxial and tensile strength ratio of rock

Joao Manso et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2019)

添加到收藏夹

Article Engineering, Environmental

Discrete element modeling of cultivator sweep-to-soil interaction: Worn and hardened edges effects on soil-tool forces and soil flow

Mehari Z. Tekeste et al.

JOURNAL OF TERRAMECHANICS (2019)

添加到收藏夹

Article Engineering, Geological

Study on Macro-Meso Failure Mechanism of Pre-fractured Rock Specimens Under Uniaxial Compression

Yujing Jiang et al.

GEOTECHNICAL AND GEOLOGICAL ENGINEERING (2018)

添加到收藏夹

Article Mathematics, Interdisciplinary Applications

Three-dimensional bonded-cell model for grain fragmentation

D. Cantor et al.

COMPUTATIONAL PARTICLE MECHANICS (2017)

添加到收藏夹

Article Engineering, Chemical

Cone crusher modelling and simulation using DEM

Johannes Quist et al.

MINERALS ENGINEERING (2016)

添加到收藏夹

Article Engineering, Chemical

Simulation and calibration of granules using the discrete element method

Peter Mueller et al.

PARTICUOLOGY (2014)

添加到收藏夹

Article Soil Science

A discrete element model for soil-sweep interaction in three different soils

Ying Chen et al.

SOIL & TILLAGE RESEARCH (2013)

添加到收藏夹

Proceedings Paper Nanoscience & Nanotechnology

Calibration and Validation of DEM Rolling and Sliding Friction Coefficients in Angle of Repose and Shear Measurements

Piotr Frankowski et al.

POWDERS AND GRAINS 2013 (2013)

添加到收藏夹

Article Materials Science, Multidisciplinary

Development and validation of calibration methods for discrete element modelling

Andrew Phillip Grima et al.

GRANULAR MATTER (2011)

添加到收藏夹

Review Statistics & Probability

Response surface methodology

Andre I. Khuri et al.

WILEY INTERDISCIPLINARY REVIEWS-COMPUTATIONAL STATISTICS (2010)

添加到收藏夹

Article Engineering, Geological

A bonded-particle model for rock

DO Potyondy et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2004)

添加到收藏夹

Article Engineering, Chemical

An experimental and numerical study of the angle of repose of coarse spheres

YC Zhou et al.

POWDER TECHNOLOGY (2002)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.