☆ 4.7 Article

Fatigue strength estimation of net-shape L-PBF Co-Cr-Mo alloy via non-destructive surface measurements

INTERNATIONAL JOURNAL OF FATIGUE (2024)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Mechanical

Fatigue life prediction of a L-PBF component in Ti-6Al-4V using sample data, FE-based simulations and machine learning

Antonio Cutolo et al.

Summary: This study predicts the fatigue life of metal components manufactured by Laser Powder Bed Fusion (L-PBF) using finite element-based simulations, stress-based sample fatigue data, and machine learning. The developed tool accurately predicts the failure location and the number of cycles to failure.

INTERNATIONAL JOURNAL OF FATIGUE (2023)

添加到收藏夹

Article Automation & Control Systems

Information-rich quality controls prediction model based on non-destructive analysis for porosity determination of AISI H13 produced by electron beam melting

Cristian Ghibaudo et al.

Summary: The article introduces a new model for optimizing the process parameters of the electron beam powder bed fusion (EB-PBF) process to manufacture dense components made of thermal-cracking sensitive materials. The model establishes a correlation between surface topography, internal porosity, and process parameters. It proposes a robust and information-rich prediction model for evaluating internal porosity. The model is experimentally validated and shows adequate performance, supporting process and quality control designers in achieving zero-defect manufacturing by reducing waste and scrap.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2023)

添加到收藏夹

Article Engineering, Mechanical

Orientation-dependent fatigue assessment of Ti6Al4V manufactured by L-PBF: Size of surface features and effect

L. Barricelli et al.

Summary: The fatigue behavior of Laser-Powder Bed Fusion (L-PBF) produced parts is influenced by the surface morphology, which depends on the relative orientation between the surface and the build direction. This study focuses on investigating the factors that correlate with the fatigue performance of L-PBF Ti6Al4V specimens in different orientations. A Fracture Mechanics-based model, using measurable roughness parameters, is employed to predict the fatigue properties. The results show that the predicted stress-life curves are accurate when considering the maximum profile depth and the shielding factor, taking into account the effect of surface orientation.

INTERNATIONAL JOURNAL OF FATIGUE (2023)

添加到收藏夹

Article Engineering, Manufacturing

An artificial intelligence classifier for electron beam powder bed fusion as-built surface topographies

Giacomo Maculotti et al.

Summary: Additive Manufacturing, a pillar of Industry 4.0, relies on in-situ measurements for automatic real-time process control. Surface topography is currently being developed as a measurement method, and a supervised machine learning classifier based on topographical characterisation is proposed for quality control. The methodology provides process engineers with visual appearance of topographical parameters and enables multi-scale, information-rich quality control.

CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY (2023)

添加到收藏夹

Article Engineering, Industrial

Ti6Al4V titanium alloy fatigue strength after AM- and machining-based process chains

Andrea Ghiotti et al.

Summary: This paper proposes a prediction method for the fatigue strength of additive manufactured Ti6Al4V titanium alloy machined under flood and cryogenic cooling conditions. It introduces the approach based on linear elastic fracture mechanics for the first time in this context. The role of surface texture, hardening, microstructural characteristics, and residual stresses in affecting fatigue strength of defective metal alloys fabricated through AM is discussed, providing new insights.

CIRP ANNALS-MANUFACTURING TECHNOLOGY (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Defects and anomalies in powder bed fusion metal additive manufacturing

Amir Mostafaei et al.

Summary: Metal additive manufacturing is a disruptive technology that revolutionizes the manufacturing industry by directly fabricating complex metal parts. However, microstructural defects and anomalies limit its widespread adoption, potentially compromising the structural integrity and performance of the products. This review aims to explore the common defects/anomalies and their formation mechanisms in powder bed fusion processes, as well as propose practical strategies for mitigating these issues.

CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE (2022)

添加到收藏夹

Article Engineering, Multidisciplinary

Gaussian process regression-based detection and correction of disturbances in surface topography measurements

Giacomo Maculotti et al.

Summary: Modern smart and intelligent manufacturing increasingly relies on highly engineered surfaces and quasi-free form geometries, necessitating fast and informative measurement tools for quality control, leading to the adoption of optical surface topography measuring instruments. Despite disturbances in surface topography measurements by optical instruments, a Gaussian process regression-based method has been proposed to identify and correct measurement disturbances simultaneously, offering a formal and practical approach to managing different types of disturbances.

QUALITY AND RELIABILITY ENGINEERING INTERNATIONAL (2022)

添加到收藏夹

Article Engineering, Mechanical

Benchmark of a probabilistic fatigue software based on machined and as-built components manufactured in AlSi10Mg by L-PBF

F. Sausto et al.

Summary: The metal additive manufacturing (AM) technology offers the possibility of obtaining optimized components with reduced weight in the space and aero-nautic industries. However, this manufacturing technique often leads to internal defects, poor surface quality, and process-induced residual stresses, which greatly affect the fatigue performance and reproducibility of AMed parts. A probabilistic finite element post-processor called ProFACE was developed to assess the fatigue strength and critical locations of complex components with process-induced defects. It has been successfully used to predict the fatigue life of AlSi10Mg components and explore the variability of significant parameters affecting the fatigue strength.

INTERNATIONAL JOURNAL OF FATIGUE (2022)

添加到收藏夹

Article Engineering, Industrial

Advances in the metrological traceability and performance of X-ray computed tomography

Wim Dewulf et al.

Summary: This paper reviews the metrological performance and traceability of X-ray computed tomography (XCT) and discusses the error sources, qualification, calibration, and optimization procedures influencing the measurement results. It also summarizes the results of interlaboratory comparisons and illustrates the performance in various dimensional measurement fields, while providing conclusions and an outlook for future research activities.

CIRP ANNALS-MANUFACTURING TECHNOLOGY (2022)

添加到收藏夹

Article Engineering, Mechanical

Fatigue strength of LPBF Ti6Al4V machined under flood and cryogenic lubri-cooling conditions

Rachele Bertolini et al.

Summary: In this study, Ti6Al4V specimens were manufactured using Laser Powder Bed Fusion (LPBF) and then heat treated and machined under two lubri-cooling conditions, flood or cryogenic. The micro-hardness, microstructure, residual stresses, and surface topography of the specimens were characterized. Fatigue tests were conducted under rotating bending loading and the fracture surfaces were analyzed using SEM to identify the killer defects. Finally, the experimental fatigue results were compared with the theoretical estimations according to the Murakami and El Haddad-Smith-Topper models.

INTERNATIONAL JOURNAL OF FATIGUE (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Fatigue Behavior of L-PBF Metals: Cost-Effective Characterization via Specimen Miniaturization

Gianni Nicoletto

Summary: High-performance metal parts produced by powder bed fusion technology have been studied for their fatigue properties, with a cost-effective testing approach introduced that has been successfully applied to a variety of surface conditions, orientations, and processing techniques of L-PBF metals.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2021)

添加到收藏夹

Article Engineering, Mechanical

High cycle fatigue behavior and life prediction for additively manufactured 17-4 PH stainless steel: Effect of sub-surface porosity and surface roughness

Simone Romano et al.

THEORETICAL AND APPLIED FRACTURE MECHANICS (2020)

添加到收藏夹

Article Chemistry, Physical

Further Studies into Crack Growth in Additively Manufactured Materials

Athanasios P. Iliopoulos et al.

MATERIALS (2020)

添加到收藏夹

Article Engineering, Mechanical

Fatigue strength assessment of as built AlSi10Mg manufactured by SLM with different build orientations

S. Beretta et al.

INTERNATIONAL JOURNAL OF FATIGUE (2020)

添加到收藏夹

Article Engineering, Industrial

Geometrical metrology for metal additive manufacturing

R. K. Leach et al.

CIRP ANNALS-MANUFACTURING TECHNOLOGY (2019)

添加到收藏夹

Article Engineering, Mechanical

Fatigue of additively manufactured 316L stainless steel: The influence of porosity and surface roughness

Klas Solberg et al.

FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2019)

添加到收藏夹

Article Engineering, Mechanical

The influence of additive manufacturing processing parameters on surface roughness and fatigue life

Joy Gockel et al.

INTERNATIONAL JOURNAL OF FATIGUE (2019)

添加到收藏夹

Article Chemistry, Physical

Surface Roughness Characterisation and Analysis of the Electron Beam Melting (EBM) Process

Manuela Galati et al.

MATERIALS (2019)

添加到收藏夹

Article Engineering, Mechanical

Surface roughness effect on multiaxial fatigue behavior of additive manufactured metals and its modeling

Jingzhe Zhang et al.

THEORETICAL AND APPLIED FRACTURE MECHANICS (2019)

添加到收藏夹

Article Engineering, Mechanical

An analysis of defects influence on axial fatigue strength of maraging steel specimens produced by additive manufacturing

G. Meneghetti et al.

INTERNATIONAL JOURNAL OF FATIGUE (2019)

添加到收藏夹

Article Engineering, Mechanical

Effect of build orientation on the fatigue properties of as-built Electron Beam Melted Ti-6Al-4V alloy

Theo Persenot et al.

INTERNATIONAL JOURNAL OF FATIGUE (2019)

添加到收藏夹

Proceedings Paper Engineering, Mechanical

Effect of Surface Roughness on Fatigue Strength of Ti-6Al-4V Alloy Manufactured by Additive Manufacturing

Masanori Nakatani et al.

FATIGUE DESIGN 2019, INTERNATIONAL CONFERENCE ON FATIGUE DESIGN, 8TH EDITION (2019)

添加到收藏夹

Article Engineering, Mechanical

Fatigue life prediction of additively manufactured material: Effects of surface roughness, defect size, and shape

A. Yadollahi et al.

FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2018)

添加到收藏夹

Article Engineering, Mechanical

Surface roughness effects on the fatigue strength of additively manufactured Ti-6Al-4V

Jonathan Pegues et al.

INTERNATIONAL JOURNAL OF FATIGUE (2018)

添加到收藏夹

Article Engineering, Mechanical

Influence of defects, surface roughness and HIP on the fatigue strength of Ti-6Al-4V manufactured by additive manufacturing

Hiroshige Masuo et al.

INTERNATIONAL JOURNAL OF FATIGUE (2018)

添加到收藏夹

Article Nanoscience & Nanotechnology

Influence of defects and as-built surface roughness on fatigue properties of additively manufactured Alloy 718

Arun Ramanathan Balachandramurthi et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)

添加到收藏夹

Article Multidisciplinary Sciences

Standard method for microCT-based additive manufacturing quality control 3: Surface roughness

Anton du Plessis et al.

METHODSX (2018)

添加到收藏夹

Article Automation & Control Systems

On the surface quality of additive manufactured parts

A. Barari et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)

添加到收藏夹

Article Engineering, Mechanical

A comparison of fatigue strength sensitivity to defects for materials manufactured by AM or traditional processes

S. Beretta et al.

INTERNATIONAL JOURNAL OF FATIGUE (2017)

添加到收藏夹

Article Engineering, Mechanical

Additive manufacturing in the context of structural integrity

Michael Gorelik

INTERNATIONAL JOURNAL OF FATIGUE (2017)

添加到收藏夹

Review Materials Science, Multidisciplinary

Progress Towards Metal Additive Manufacturing Standardization to Support Qualification and Certification

Mohsen Seifi et al.

JOM (2017)

添加到收藏夹

Article Engineering, Multidisciplinary

Characterisation of the topography of metal additive surface features with different measurement technologies

Nicola Senin et al.

MEASUREMENT SCIENCE AND TECHNOLOGY (2017)

添加到收藏夹

Article Optics

Optimization of surface measurement for metal additive manufacturing using coherence scanning interferometry

Carlos Gomez et al.

OPTICAL ENGINEERING (2017)

添加到收藏夹

Article Engineering, Multidisciplinary

Areal surface texture data extraction from X-ray computed tomography reconstructions of metal additively manufactured parts

A. Townsend et al.

PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Qualification of AM parts: Extreme value statistics applied to tomographic measurements

S. Romano et al.

MATERIALS & DESIGN (2017)

添加到收藏夹

Article Nanoscience & Nanotechnology

Mechanical behavior of additive manufactured, powder-bed laser-fused materials

Todd M. Mower et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of surface roughness on fatigue performance of additive manufactured Ti-6Al-4V

D. Greitemeier et al.

MATERIALS SCIENCE AND TECHNOLOGY (2016)

添加到收藏夹

Review Engineering, Multidisciplinary

Surface texture metrology for metal additive manufacturing: a review

A. Townsend et al.

PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2016)

添加到收藏夹

Article Computer Science, Software Engineering

Microgeometry capture using an elastomeric sensor

Micah K. Johnson et al.

ACM TRANSACTIONS ON GRAPHICS (2011)

添加到收藏夹

Article Engineering, Industrial

Experimental study aiming to enhance the surface finish of fused deposition modeled parts

L. M. Galantucci et al.

CIRP ANNALS-MANUFACTURING TECHNOLOGY (2009)

添加到收藏夹

Article Engineering, Multidisciplinary

The case of surface texture parameter RSm

PJ Scott

MEASUREMENT SCIENCE AND TECHNOLOGY (2006)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.