☆ 4.7 Article

Cadmium ion-imprinted polymers for adsorption and detection of cadmium ions

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Review Engineering, Environmental

Colorimetric detection of heavy metal ions with various chromogenic materials: Strategies and applications

Zhuo Chen et al.

Summary: This paper focuses on the chromogenic materials and sensing strategies for the colorimetric detection of heavy metal ions. The unique optical and chemical properties of each chromogenic material result in different colorimetric sensing mechanisms. The review categorizes the chromogenic materials into organic, inorganic, and other materials, and discusses their detailed sensing strategies, performance, and real sample applications. Current challenges and prospects related to the colorimetry of heavy metal ions are also explored.

JOURNAL OF HAZARDOUS MATERIALS (2023)

添加到收藏夹

Article Chemistry, Applied

A facile approach for grafting ion imprinted polymer onto magnetic multi-walled carbon nanotubes for selective removal and preconcentration of cadmium in food and wastewater samples prior to atomic spectrometric determination

Aminul Islam et al.

Summary: A 3D Fe3O4@MWCNT-CdIIP was synthesized by oxidizing the surface of multi-walled carbon nanotubes and then terminating it with an ion-imprinted polymer. The artificial neural network outperformed the central composite design methodology in predicting the optimal adsorption conditions. Under the optimized conditions (pH 5.6, time 15 min, concentration 800 μg/mL, temperature 25 °C), the adsorption capacity of Cd(II) was 109 mg/g (2.5 times higher than non-imprinted polymer) according to the Toth isotherm. The developed solid phase extraction method coupled with flame atomic absorption spectrometry showed selective recognition towards Cd(II), with a limit of detection of 1.13 μg/L and a limit of quantification of 3.21 μg/L after preconcentration (preconcentration factor 50), and demonstrated good robustness. The method was successfully applied to determine Cd(II) in various food samples, water, wastewater, and also showed efficient removal (>95%) of anionic dyes using Cd(II) loaded IIP.

FOOD CHEMISTRY (2023)

添加到收藏夹

Article Chemistry, Physical

Histidine-mediated dendritic mesoporous magnetic ion-imprinted polymer toward effective and recoverable cadmium removal

Youmei Bao et al.

Summary: In this study, a magnetic dendritic mesoporous silica nanoparticle material was prepared via surface ion-imprinted technique for selective removal of Cd(II) from aqueous solution. The material showed fast and selective adsorption properties, with high stability and reproducibility.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2023)

添加到收藏夹

Article Chemistry, Analytical

Simultaneous detection of SO32-and PO43-anions, in aqueous solutions based on 4-(2-Pyridylazo) resorcinol (PAR) as a colorimetric chemosensor and analytical applications

Hossein Tavallali et al.

Summary: In this paper, a novel bare eye detection method based on the competition between anions and metal receptors was presented. The method is simple, fast, and does not require organic solvents or chemical modifications. It can be used to detect Cd(2+) and Cu(2+) ions, and simultaneous determination of phosphate and sulphite ions by changing the metal ions. Furthermore, an INHIBIT molecular logic gate was obtained using chemical inputs and UV-Vis absorbance signals as the output.

INTERNATIONAL JOURNAL OF ENVIRONMENTAL ANALYTICAL CHEMISTRY (2022)

添加到收藏夹

Article Chemistry, Analytical

Synthesis of a magnetic SBA-15-NH2@Dual-Template Imprinted Polymer for solid phase extraction and determination of Pb and Cd in vegetables; Box Behnken design

Alireza Taheri et al.

Summary: In this study, a simple one-step method was used to extract and determine lead and cadmium. The important variables in extraction and pre-concentration were identified through analysis of variance and their behavior was modeled. The synthesized dual-template imprinted polymer demonstrated effective adsorption and determination of lead and cadmium.

ANALYTICA CHIMICA ACTA (2022)

添加到收藏夹

Article Chemistry, Physical

Preparation, characterization and adsorption characteristics of diatom-based Cd(II) surface ion-imprinted polymer

Lili Huang et al.

Summary: A novel diatom-based Cd(II) ion-imprinted polymer (Dt-IIP) was successfully prepared and its adsorption performance was investigated. The results showed that the polymer had a high adsorption capacity and excellent selectivity, making it suitable for efficient treatment of wastewater containing heavy metal ions.

JOURNAL OF DISPERSION SCIENCE AND TECHNOLOGY (2022)

添加到收藏夹

Article Environmental Sciences

Tailored-designed material for the preconcentration of Cd(II) on glycidyl methacrylate-based ion-imprinted polymer for flame atomic absorption for trace determination in real samples: multivariate optimization

Aminul Islam et al.

Summary: A new Cd(II)-imprinting polymer was synthesized and used for the development of a dispersive magnetic solid-phase extraction method for the determination of Cd(II) in environmental samples. The material exhibited promising adsorption capacity and fast kinetics, making it a potential candidate for Cd(II) determination in various samples.

ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2022)

添加到收藏夹

Review Environmental Sciences

Research Progress on Heavy Metals Pollution in the Soil of Smelting Sites in China

Muhammad Adnan et al.

Summary: Contamination by heavy metals in China has significant impacts on soil quality, food security, and human health. Mining and smelting activities release massive amounts of heavy metals into the environment, causing severe contamination and hazards to plants, soil organisms, and humans. Pb toxicity is particularly harmful to children. Novel approaches for controlling and reducing heavy metal pollution, such as hydrometallurgy and phytoremediation, offer potential solutions. However, environmentally friendly remediation of contaminated sites remains a challenge.

TOXICS (2022)

添加到收藏夹

Article Chemistry, Analytical

An Ultrasensitive and Selective Determination of Cadmium Ions at ppt Level Using an Enzymic Membrane with Colorimetric and Electrochemical Detection

Raouia Attaallah et al.

Summary: The article introduces a developed enzymic membrane for rapid detection of Cd2+ in water samples by inhibiting HRP. The advantages of using the enzymic membrane include no pretreatment required, and a developed electrochemical biosensor with a wide linear calibration range.

BIOSENSORS-BASEL (2022)

添加到收藏夹

Article Biochemistry & Molecular Biology

Rapid, Simultaneous, and Automatic Determination of Lead and Cadmium in Cereals with a New High Performance Composite Hollow Cathode Lamp Coupled to Graphite Furnace Atomic Absorption Spectrometry

Yanxiang Wu et al.

Summary: This paper presents a rapid, low-cost, and highly automated method for detecting Cd and Pb in cereals. The method uses a diluted acid extraction pre-treatment method and a high-performance lead-cadmium composite hollow-cathode lamp, and achieves automatic determination from sample weighing to result output through an automatic diluted acid extraction system.

MOLECULES (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Flax fiber grafted with Cd(II)-imprinted 2-pyridylthiourea for selective ion removal

Abeer Abdulaziz H. Bukhari et al.

Summary: The surface ion-imprinting technique was used to develop a Cd(II) ion-selective chelating sorbent based on cellulosic flax fibers. The sorbent showed a high adsorption capacity and selectivity for Cd(II) ions.

MATERIALS CHEMISTRY AND PHYSICS (2022)

添加到收藏夹

Review Chemistry, Analytical

Nanomaterials-Based Ion-Imprinted Electrochemical Sensors for Heavy Metal Ions Detection: A Review

Liangyun Yu et al.

Summary: In this review, ion-imprinted electrochemical sensors (IIECSs) based on nanomaterials for heavy metal ions (HMIs) detection are discussed. The modification of electrode surfaces with nanomaterials improves the detection sensitivity and reduces the detection limit of the sensors. The fundamentals and synthetic strategies of ion-imprinted polymers (IIPs) as well as the applications of various nanomaterials as modifiers and sensitizers are highlighted in the construction of HMIIECSs and their influence on the sensing performance.

BIOSENSORS-BASEL (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Preparation and Characterization of Cadmium(II)-Ion-Imprinted Composites Based on Epoxy Resin

Sining Zhu et al.

Summary: In this study, an environmentally-friendly porous cadmium-ion-imprinted composite (Cd(II)-IIP) was successfully prepared and its adsorption performance was systematically investigated. The Cd(II)-IIP showed high selectivity for Cd(II) and good recyclability in the presence of polymetallic ions. The adsorption process was mainly monolayer chemisorption and spontaneous endothermic.

ACS APPLIED POLYMER MATERIALS (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Preparation, Characterization of Cd(II) Ion-Imprinted Microsphere and Its Selectivity for Template Ion

Aray Murat et al.

Summary: In this study, highly selective cadmium ion imprinted maleic acid-co-acrylonitrile polymeric microspheres were successfully synthesized and their performance was analyzed through adsorption experiments and characterization. The results demonstrated that Cd-I-MA-co-AN had a high adsorption capacity for cadmium ions and showed some selectivity towards other metal ions. Furthermore, Cd-I-MA-co-AN exhibited good reusability and high recovery rate.

COATINGS (2022)

添加到收藏夹

Article Chemistry, Physical

Choice of the functional monomer of molecularly imprinted polymers: Does it rely on strong acid-base or hydrogen bonding interactions?

Merymene Boukadida et al.

Summary: The choice of functional monomer in molecularly imprinted polymers (MIPs) is crucial for designing selective recognition sites for adsorption. Studies using H-1 NMR spectroscopy revealed that the weakly acidic acrylamide (AA) showed stronger hydrogen-bonding interactions with histamine (HA) compared to methacrylic acid (MAA). Adsorption isotherms and modeling of MIPs demonstrated a higher selective binding of HA to AA-based MIPs.

COLLOID AND INTERFACE SCIENCE COMMUNICATIONS (2022)

添加到收藏夹

Article Toxicology

Are Ayurvedic medications store house of heavy metals?

A. Bhalla et al.

Summary: A study found that Ayurvedic medications manufactured in India commonly contain toxic heavy metals in quantities that exceed the limits set by the Food and Agriculture Organization/World Health Organization.

TOXICOLOGY RESEARCH (2022)

添加到收藏夹

Article Engineering, Environmental

Synthesis, characterization, and performance evaluation of ion-imprinted crosslinked chitosan (with sodium tripolyphosphate) for cadmium biosorption

Ataollah Babakhani et al.

Summary: This study successfully removed cadmium from aqueous solution using Cd(II)-imprinted chitosan hydrogel beads. The synthesis was confirmed through various analyses, and the adsorption process parameters and mechanisms were determined through batch adsorption tests and isotherm investigations.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2022)

添加到收藏夹

Article Chemistry, Applied

Highly selective removal and recovery of Ni(II) from aqueous solution using magnetic ion-imprinted chitosan nanoparticles

Yuan Chen et al.

Summary: The nano-sized magnetic ion-imprinted polymers (MIIPs) synthesized using chitosan showed high sorption selectivity for Ni(II) and could efficiently recover the adsorbed ions. The sorption process was quick, endothermic, and could be described by Langmuir isotherm model and pseudo-second-order kinetic model. MIIPs proved to be a suitable adsorbent for selective removal and recovery of low-concentration Ni(II) ions from wastewaters.

CARBOHYDRATE POLYMERS (2021)

添加到收藏夹

Article Engineering, Environmental

Micro solid phase extraction of cadmium and lead on a new ion-imprinted hierarchical mesoporous polymer via dual-template method in river water and fish muscles: Optimization by experimental design

Mehdi Fattahi et al.

Summary: In this study, a new class of hierarchical silica based imprinted mesoporous polymers was successfully fabricated for the selective extraction of cadmium and lead ions. The material exhibited a hierarchical mesoporous structure with high specific surface area and adsorption capacity for Cd(II) and Pb(II). The optimal experimental conditions were determined using response surface methodology and successfully applied for the detection of Cd(II) and Pb(II) ions in river water and fish samples.

JOURNAL OF HAZARDOUS MATERIALS (2021)

添加到收藏夹

Article Polymer Science

Effect of ethylene diamine tetra-acetic acid and functional monomers on the structure and adsorption properties of copper (II) ion-imprinted polymers

Angkana Chaipuang et al.

Summary: Novel Cu-IIPs were synthesized using copper (II) sulfate pentahydrate as the template ion and methacrylic acid (MAA) as the functional monomer, showing increased adsorption capacity for Cu2+ at pH 6. These Cu-IIPs demonstrated high recognition ability for Cu2+ and potential application for efficient removal of Cu2+ from aqueous solutions.

POLYMERS FOR ADVANCED TECHNOLOGIES (2021)

添加到收藏夹

Article Chemistry, Inorganic & Nuclear

Novel Cd(II) methacrylate monomer complex with 1-vinylimidazole: Synthesis, characterization and ion imprinted polymer applications

Zuhal Yolcu et al.

Summary: A novel [Cd(maa)(2)(vim)(2)H2O]•H2O monomer complex was synthesized using suitable ligands for polymerization. The Cd(II) ion imprinted polymer (Cd(II)-IIP) was prepared by precipitation polymerization technique and characterized using various methods. The adsorption performance and selectivity properties of Cd(II)-IIP were investigated, showing a high adsorption capacity and selectivity for Cd2+ ions. The Langmuir and Freundlich isotherm models were compared with experimental results, and Cd(II) ion content was determined using inductively coupled plasma mass spectrometry (ICP-MS).

POLYHEDRON (2021)

添加到收藏夹

Article Chemistry, Applied

Preconcentration of Nickel from Aqueous Environment Using Microspheric Nickel(II) Ion Imprinted Polymer

Behisht Ara et al.

Summary: A solid-phase extraction method based on molecularly imprinted polymer was developed for rapid, simple, and selective preconcentration/determination of Ni(II) from aqueous solutions. After optimization, the polymer exhibited high adsorption capacity, and efficient removal of interfering matrix in real water samples during preconcentration of Ni(II) was achieved.

JOURNAL OF WATER CHEMISTRY AND TECHNOLOGY (2021)

添加到收藏夹

Review Environmental Sciences

The Effects of Cadmium Toxicity

Giuseppe Genchi et al.

INTERNATIONAL JOURNAL OF ENVIRONMENTAL RESEARCH AND PUBLIC HEALTH (2020)

添加到收藏夹

Article Chemistry, Physical

Construction and selective removal of Cd ion based on diatom -based Cd (II) ion -imprinted composite adsorbent

Ying Miao et al.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Computationally Designed Perrhenate Ion Imprinted Polymers for Selective Trapping of Rhenium Ions

Samuel Kassahun Mamo et al.

ACS APPLIED POLYMER MATERIALS (2020)

添加到收藏夹

Article Engineering, Chemical

Extraction of Rb(I) Ions from Aqueous Solution Using Novel Imprinting Materials

Xingwen Liu et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Effects of mono-dentate and bi-dentate ligands on adsorption characteristics of Cu-ion-imprinted hybrids

Chia-yin Chou et al.

RESEARCH ON CHEMICAL INTERMEDIATES (2019)

添加到收藏夹

Article Engineering, Environmental

Visual nickel(II) ions treatment in petroleum samples using a mesoporous composite adsorbent

Ahmed Shahat et al.

CHEMICAL ENGINEERING JOURNAL (2018)

添加到收藏夹

Article Chemistry, Physical

A novel ion-imprinted polymer based on graphene oxide-mesoporous silica nanosheet for fast and efficient removal of chromium (VI) from aqueous solution

Renfeng Huang et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2018)

添加到收藏夹

Article Chemistry, Physical

Facile preparation of a nano-imprinted polymer on magnetite nanoparticles for the rapid separation of lead ions from aqueous solution

Delong Kong et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2018)

添加到收藏夹

Article Engineering, Environmental

Integrated ion imprinted polymers-paper composites for selective and sensitive detection of Cd(II) ions

Kai Huang et al.

JOURNAL OF HAZARDOUS MATERIALS (2017)

添加到收藏夹

Article Engineering, Environmental

An extraordinarily sensitive voltammetric sensor with picomolar detection limit for Pb2+ determination based on carbon paste electrode impregnated with nano-sized imprinted polymer and multi-walled carbon nanotubes

Taher Alizadeh et al.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2017)

添加到收藏夹

Article Food Science & Technology

Selective Solid-Phase Extraction and Trace Monitoring of Lead Ions in Food and Water Samples Using New Lead-Imprinted Polymer Nanoparticles

Mohammad Behbahani et al.

FOOD ANALYTICAL METHODS (2015)

添加到收藏夹

Article Polymer Science

Synthesis and characterization of cadmium(II)-imprinted poly(1-allyl-2-thiourea-co-ethylene glycol dimethacrylate) particles for selective separation

Piotr Lulinski et al.

POLYMER BULLETIN (2014)

添加到收藏夹

Article Materials Science, Biomaterials

Cadmium-sensitive electrode based on tetracetone derivatives of p-tert-butylcalix[8]arene

C. Dernane et al.

MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2013)

添加到收藏夹

Article Chemistry, Analytical

Solid phase selective separation and preconcentration of Cu(II) by Cu(II)-imprinted polyrnethacrylic microbeads

Ivanka Dakova et al.

ANALYTICA CHIMICA ACTA (2007)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.