相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Influence of monomodal K2CO3 and bimodal K2CO3 + NaCl as space holders on microstructure and mechanical properties of porous copper
Sumit Ray et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2023)
Effect of SiC particle size on the strength and stiffness of porous Si3N4–SiC composites fabricated via a low-temperature sintering process
Siddharth et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2023)
Study of the elastic properties of porous copper fabricated via the lost carbonate sintering process
Prasanta Jana et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)
Formation of hierarchical Si3N4 foams by protein-based gelcasting and chemical vapor infiltration
Junsheng Li et al.
JOURNAL OF ADVANCED CERAMICS (2021)
Fabrication of in-situ self-reinforced Si3N4 ceramic foams for high-temperature thermal insulation by protein foaming method
Feiyue Yang et al.
CERAMICS INTERNATIONAL (2021)
Microstructure and gas permeation performance of porous silicon nitride ceramics with unidirectionally aligned channels
Xueqing Li et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2020)
Fabrication and flexural strength of porous Si3N4ceramics with Li2CO3and Y2O3as sintering additives
Hai-long Hu et al.
JOURNAL OF CENTRAL SOUTH UNIVERSITY (2020)
Gel-Casting Prepared Porous Si3N4 Ceramics with Different Contents of Y2O3 and Al2O3 Additives
Chunrong Zou et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2020)
Fabrication, microstructural characterization and gas permeability behavior of porous silicon nitride ceramics with controllable pore structures
Xueqing Li et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2019)
Low-temperature preparation of porous SiC ceramics using phosphoric acid as a pore-forming agent and a binder
Tian Gu et al.
CERAMICS INTERNATIONAL (2019)
Gas permeation performance of porous silicon nitride ceramics with controllable pore structures
Xueqing Li et al.
CERAMICS INTERNATIONAL (2019)
The effect of gelcasting parameters on microstructural optimization of porous Si3N4 ceramics
Amir Parsi et al.
CERAMICS INTERNATIONAL (2019)
Processing and characterization of elastic and thermal expansion behaviour of interpenetrating Al12Si/alumina composites
Siddhartha Roy et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Mechanical behavior of porous Si3N4 ceramics manufactured with 3D printing technology
S. A. Lurie et al.
JOURNAL OF MATERIALS SCIENCE (2018)
Extrusion of highly porous silicon nitride ceramics with bimodal pore structure and improved gas permeability
Guang-Peng Jiang et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2018)
Fabrication and properties of Si3N4 bioscaffolds with orderly-interconnected big pore channels and well-distributed small pores
Lijie Ma et al.
CERAMICS INTERNATIONAL (2018)
A non-sintering fabrication method for porous Si3N4 ceramics via sol hydrothermal process
Shujuan Hu et al.
CERAMICS INTERNATIONAL (2018)
Effects of oil on gelcasting of oil-in-water Si3N4 suspensions
Feng Wang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Open-Porous Silicon Nitride-Based Ceramics in Tubular Geometry Obtained by Slip-Casting and Gelcasting
Dominik Brouczek et al.
ADVANCED ENGINEERING MATERIALS (2017)
Effect of TiO2 addition on the microstructures, mechanical and dielectric properties of porous Si3N4-based ceramics
Li Gu et al.
ADVANCES IN APPLIED CERAMICS (2017)
Effects of pore structure on thermal conductivity and strength of alumina porous ceramics using carbon black as pore-forming agent
Jingjing Liu et al.
CERAMICS INTERNATIONAL (2016)
Preparation of silicon nitride foam with three-dimensional interconnected pore structure
Liuyan Yin et al.
MATERIALS & DESIGN (2016)
Silicon nitride foams from emulsions sintered by rapid intense thermal radiation
Elisangela Guzi de Moraes et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2015)
Preparation of porous Si3N4 ceramics via tailoring solid loading of Si3N4 slurry and Si3N4 poly-hollow microsphere content
Jia-Min Wu et al.
JOURNAL OF ADVANCED CERAMICS (2015)
The effect of the crystallization of oxidation-derived SiO2 on the properties of porous Si3N4-SiO2 ceramics synthesized by oxidation
Xiangming Li et al.
CERAMICS INTERNATIONAL (2014)
Fabrication and properties of porous silicon nitride ceramics via microwave sintering
Mengyong Sun et al.
INTERNATIONAL JOURNAL OF MATERIALS RESEARCH (2014)
Silicon nitride foams from emulsions
E. G. de Moraes et al.
MATERIALS LETTERS (2014)
Porous silicon nitride ceramics designed for bone substitute applications
Katarina Bodisova et al.
CERAMICS INTERNATIONAL (2013)
Fabrication of Si3N4 preforms from Si3N4 produced via CRN technique
Fatih Caliskan et al.
JOURNAL OF POROUS MATERIALS (2013)
Characterization of Elastic Properties in Porous Silicon Carbide Preforms Fabricated Using Polymer Waxes as Pore Formers
Siddhartha Roy et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2013)
Experiment and modeling on the compressive behaviors for porous silicon nitride ceramics
Zixing Lu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Mechanical and dielectric properties of gelcasted Si3N4 porous ceramic using CaHPO4 as an additive
Xiaoming Duan et al.
CERAMICS INTERNATIONAL (2012)
Macro-porous ceramics: processing and properties
T. Ohji et al.
INTERNATIONAL MATERIALS REVIEWS (2012)
Pore structure control of Si3N4 ceramics based on particle-stabilized foams
Juanli Yu et al.
JOURNAL OF POROUS MATERIALS (2012)
Mechanical properties of porous ceramics in compression: On the transition between elastic, brittle, and cellular behavior
S. Meille et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2012)
Mechanical and dielectric properties of silicon nitride ceramics with high and hierarchical porosity
Fei Chen et al.
MATERIALS & DESIGN (2012)
Microstructure and mechanical properties of three porous Si3N4 ceramics fabricated by different techniques
Xiangming Li et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
Porous Si3N4 Fabricated by Phase Separation Method Using Benzoic Acid as Pore-Forming Agent
Jianshe Yue et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2011)
Pore structure control of starch processed silicon nitride porous ceramics with near-zero shrinkage
Fei Chen et al.
MATERIALS LETTERS (2011)
Complete determination of elastic moduli of interpenetrating metal/ceramic composites using ultrasonic techniques and micromechanical modelling
Siddhartha Roy et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
Characterization of porous silicon nitride ceramics by pressureless sintering using fly ash cenosphere as a pore-forming agent
Yingfeng Shao et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2009)
Characterization of porous silicon nitride ceramics using bentonite as binder and sintering additive
Guang-Peng Jiang et al.
MATERIALS CHARACTERIZATION (2009)
Porous Silicon Nitride Ceramics Prepared by Extrusion Using Starch as Binder
Guang-Peng Jiang et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2008)
Sintering behavior in zirconium phosphate bonded silicon nitride porous ceramics
Fei Chen et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
Pressureless sintering of α-Si3N4 porous ceramics using a H3PO4 pore-forming agent
Fei Chen et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2007)
Oxidation bonding of porous silicon nitride ceramics with high strength and low dielectric constant
Shuqiang Ding et al.
MATERIALS LETTERS (2007)
Preparation of zirconium pyrophosphate bonded silicon nitride porous ceramics
F. Chen et al.
MATERIALS SCIENCE AND TECHNOLOGY (2006)
Processing routes to macroporous ceramics: A review
Andre R. Studart et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2006)
A method to estimate the influence of the notch-root radius on the fracture toughness measurement of ceramics
D Picard et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2006)
Porous silicon nitride ceramics prepared by reduction-nitridation of silica
SY Shan et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2005)
Synthesis of porous Si3N4 ceramics with rod-shaped pore structure
HF Yang et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2005)
Comparison of mechanical properties of silicon nitrides with controlled porosities produced by different fabrication routes
A Díaz et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2005)
Novel method to optimize the structure of reticulated porous ceramics
XP Pu et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2004)
Characterisation of porous silicon nitride materials produced with starch
A Diaz et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2004)
Combustion synthesis of network silicon nitride porous ceramics
DY Chen et al.
CERAMICS INTERNATIONAL (2003)
Fabrication of porous anisotropic silicon nitride by using partial sinter-forging technique
N Kondo et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2002)
Synthesis of porous silicon nitride with unidirectionally aligned channels using freeze-drying process
T Fukasawa et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2002)
Filtering properties of porous ceramics with unidirectionally aligned pores
T Fukasawa et al.
JOURNAL OF THE CERAMIC SOCIETY OF JAPAN (2002)
Microstructure and mechanical properties of silicon nitride ceramics with controlled porosity
JF Yang et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2002)
High performance porous silicon nitrides
Y Inagaki et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2002)
Effect of α/β phase ratio on microstructure and mechanical properties of silicon nitride ceramics
H Kawaoka et al.
JOURNAL OF MATERIALS RESEARCH (2001)
Porosity and microstructure control of porous ceramics by partial hot pressing
JF Yang et al.
JOURNAL OF MATERIALS RESEARCH (2001)