☆ 4.8 Article

Perovskite Light-Emitting Diode Display Based on MoS2 Backplane Thin-Film Transistors

ADVANCED MATERIALS (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Chemistry, Multidisciplinary

Highly Stable and Photoluminescent CsPbBr3/Cs4PbBr6 Composites for White-Light-Emitting Diodes and Visible Light Communication

Longshi Rao et al.

Summary: A facile and environmentally friendly method is developed to prepare high-stability and strong-emission CsPbBr3/Cs4PbBr6 composites. The fabricated composites show improved photostability, thermostability, and polar solvent stability, making them promising candidates for high-performance displays and visible light communication.

NANOMATERIALS (2023)

添加到收藏夹

Article Chemistry, Multidisciplinary

Surface Defect Suppression for High Color Purity Light-Emitting Diode of Free-Standing Single-Crystal Perovskite Film

Lutao Li et al.

Summary: High color purity is an important feature for single-crystal metal halide perovskite light-emitting diodes (LEDs). However, the absence of effective surface defect passivation hinders the achievement of high color purity in single-crystal perovskite LEDs. In this study, a fully wrapped structure using ultra-thin polymethyl methacrylate is proposed to passivate the surface of free-standing CsPbBr3 single-crystal films, leading to improved color purity and large luminescent area. The interaction between the C(sic)O bond in polymer chains and the Lewis acid PbBr2 is found to play a key role in surface passivation.

ADVANCED FUNCTIONAL MATERIALS (2023)

添加到收藏夹

Article Optics

Perovskite light-emitting diodes with solution-processed MoO3 films as the hole-transport layers

Doudou Liang et al.

Summary: In this study, MoO3 was used as the hole-transporting layer (HTLs) in perovskite light-emitting diodes (PeLEDs) to replace PEDOT:PSS, achieving high-performance PeLEDs. Smooth and uniform MoO3 HTLs were fabricated using a solution-processing spin-coating method. The MoO3-based device achieved a maximum external quantum efficiency of 3.8%, equivalent to the PEDOT:PSS-based device. Furthermore, PeLEDs with MoO3 as the HTLs exhibited better shelf stability compared to the PEDOT:PSS counterpart.

JOURNAL OF LUMINESCENCE (2023)

添加到收藏夹

Article Optics

Highly bright and stable single-crystal perovskite light-emitting diodes

Wenjing Chen et al.

Summary: By minimizing the trap density using mixed cations and excess ammonium halides and polyvidone as precursors, the use of in situ solution-grown perovskite single crystals (SCs) can mitigate ion migration and severe Auger recombination, resulting in increased device lifetime and brightness.

NATURE PHOTONICS (2023)

添加到收藏夹

Article Optics

Efficient all-thermally evaporated perovskite light-emitting diodes for active-matrix displays

Jinghui Li et al.

Summary: All-thermal evaporation enables the fabrication of perovskite LEDs and active-matrix displays with high efficiency and resolution. A tri-source co-evaporation strategy with a multifunctional Lewis-base additive is developed to improve the quality of perovskite films. Green PeLEDs with a peak external quantum efficiency of 16.4% and active-matrix PeLED displays with high-definition images and videos are achieved.

NATURE PHOTONICS (2023)

添加到收藏夹

Review Materials Science, Multidisciplinary

Thermal Evaporation for Halide Perovskite Optoelectronics: Fundamentals, Progress, and Outlook

Peipei Du et al.

Summary: Metal halide perovskites have significantly advanced optoelectronic devices, particularly in the fields of photovoltaics and light-emitting diodes. The thermal evaporation method offers advantages such as easy control of film thickness, absence of toxic solvents, and compatibility with existing industry practices.

ADVANCED OPTICAL MATERIALS (2022)

添加到收藏夹

Review Chemistry, Multidisciplinary

The Trend of 2D Transistors toward Integrated Circuits: Scaling Down and New Mechanisms

Yang Shen et al.

Summary: This study reviews the current structures, contact engineering, and doping methods for 2D TMDC materials, as well as the scaling-down process and performance optimization. It also analyzes the obstacles to developing high-density and low-power integrated circuits using MoS2 and provides a brief analysis of the prospects for using MoS2 in large-scale ICs from the perspectives of material, system performance, and application.

ADVANCED MATERIALS (2022)

添加到收藏夹

Article Nanoscience & Nanotechnology

Exploiting the full advantages of colloidal perovskite nanocrystals for large-area efficient light-emitting diodes

Young-Hoon Kim et al.

Summary: In this study, highly efficient large-area PeLEDs with high uniformity were achieved through the use of colloidal perovskite nanocrystals. The precrystallized PNCs were not affected by the film formation process and a modified bar-coating method facilitated the formation of uniform large-area films. This method shows promise for the development of large-scale industrial displays and solid-state lighting.

NATURE NANOTECHNOLOGY (2022)

添加到收藏夹

Article Nanoscience & Nanotechnology

Wafer-scale monolithic integration of full-colour micro-LED display using MoS2 transistor

Sumin Hwangbo et al.

Summary: This paper presents a novel fabrication method for the integration of transition metal dichalcogenides with compound semiconductors, which is compatible with a batch microfabrication process. The authors demonstrate the synthesis of a thin film of molybdenum disulfide on a gallium-nitride-based epitaxial wafer, which is then used to form a thin film transistor array. This transistor array is subsequently integrated with micro-light-emitting-diode devices to create an active matrix micro-LED display. The authors also show a simple approach for obtaining red and green colors through the printing of quantum dots on a blue micro-LED, enabling the scalable fabrication of full-color micro-LED displays.

NATURE NANOTECHNOLOGY (2022)

添加到收藏夹

Editorial Material Nanoscience & Nanotechnology

Colloidal nanocrystals for large-area LEDs

Kang Wang et al.

Summary: Tilting the substrate after bar-coating of colloidal perovskite nanocrystals facilitates efficient self-assembly and enables large-area perovskite LEDs.

NATURE NANOTECHNOLOGY (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Recent progress of perovskite devices fabricated using thermal evaporation method: Perspective and outlook

S-R Bae et al.

Summary: Metal halide perovskites have gained significant attention in the semiconductor field due to their simple manufacturing process, high optoelectronic performance, and low cost. This review focuses on the spin-coating method and thermal evaporation method used to fabricate perovskite thin films, as well as the research progress on perovskite devices developed using thermal evaporation.

MATERIALS TODAY ADVANCES (2022)

添加到收藏夹

Article Multidisciplinary Sciences

Ultra-bright, efficient and stable perovskite light-emitting diodes

Joo Sung Kim et al.

Summary: This study reports the development of ultra-bright, efficient, and stable light-emitting diodes (PeLEDs) made of core/shell perovskite nanocrystals. The nanocrystals, obtained through in situ reaction of benzylphosphonic acid with polycrystalline perovskite films, demonstrate strong carrier confinement and maintain good charge-transport properties.

NATURE (2022)

添加到收藏夹

Article Optics

Ultrastable near-infrared perovskite light-emitting diodes

Bingbing Guo et al.

Summary: This study demonstrates ultrastable and efficient perovskite light-emitting diodes for near-infrared light source. The introduction of a dipolar molecular stabilizer enhances the stability by preventing phase transformation and decomposition of the perovskite.

NATURE PHOTONICS (2022)

添加到收藏夹

Article Optics

Comprehensive defect suppression in perovskite nanocrystals for high-efficiency light-emitting diodes

Young-Hoon Kim et al.

Summary: In this study, a one-dopant alloying strategy was employed to enhance electroluminescence efficiencies of metal halide perovskite nanocrystals (PNCs) by reducing defect formation and enhancing charge carrier confinement. Surface-stabilizing agents and bromide vacancy healing agents were utilized to decrease defect density and improve carrier confinement, resulting in significant enhancement in performance.

NATURE PHOTONICS (2021)

添加到收藏夹

Article Multidisciplinary Sciences

Ultralow contact resistance between semimetal and monolayer semiconductors

Pin-Chun Shen et al.

Summary: The article discusses achieving ohmic contact between semimetallic bismuth and semiconducting monolayer transition metal dichalcogenides, suppressing metal-induced gap states and significantly reducing contact resistance. Experimental results demonstrate zero Schottky barrier height and high on-state current density on multilayer MoS2.

NATURE (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Highly Efficient Vacuum-Evaporated CsPbBr3 Perovskite Light-Emitting Diodes with an Electrical Conductivity Enhanced PolymerAssisted Passivation Layer

Nakyung Kim et al.

Summary: Efficient vacuum-deposited CsPbBr3 perovskite light emitting diodes (PeLEDs) are achieved by introducing a separate polyethylene oxide (PEO) passivation layer. The enhancement in photoluminescence quantum yield intensity is attributed to the passivation of interfacial defects of the perovskite by the PEO layer. Doping PEO layers with MgCl2 solves the issue of PEO's electrically insulating nature, resulting in enhanced luminance and external quantum efficiency (EQE).

ACS APPLIED MATERIALS & INTERFACES (2021)

添加到收藏夹

Article Multidisciplinary Sciences

Highly sensitive active pixel image sensor array driven by large-area bilayer MoS2 transistor circuitry

Seongin Hong et al.

Summary: Various large-area growth methods have been developed for two-dimensional transition metal dichalcogenides, but have not been used for synthesizing active pixel image sensors. An active pixel image sensor array with bilayer MoS2 film was successfully prepared and exhibited high photoresponsivity. The main mechanism for the high photoresponsivity of bilayer MoS2 phototransistors is attributed to a photo-gating effect by holes trapped at subgap states.

NATURE COMMUNICATIONS (2021)

添加到收藏夹

Article Multidisciplinary Sciences

Efficient and large-area all vacuum-deposited perovskite light-emitting diodes via spatial confinement

Peipei Du et al.

Summary: The article discusses the fabrication of efficient CsPbBr3 PeLEDs using a vacuum deposition technique, achieving an external quantum efficiency (EQE) of 8.0% and demonstrating a functional area PeLED of 40.2 cm(2) for potential display applications. The strategy of confinement strength regulation in thermally evaporated perovskites provides an effective way to process high-efficiency and large-area PeLEDs towards commercial display panels.

NATURE COMMUNICATIONS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Opportunities and challenges in perovskite LED commercialization

Kai Zhang et al.

Summary: LEDs are considered as energy-saving and environmentally friendly lighting technology, while metal halide perovskites, as a new type of photoelectric material, show high optical performance, low cost, and short production cycles, making them strong competitors in the future lighting market.

JOURNAL OF MATERIALS CHEMISTRY C (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Flexible and Transparent Thin-Film Transistors Based on Two-Dimensional Materials for Active-Matrix Display

Hamin Park et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Modulation of Growth Kinetics of Vacuum-Deposited CsPbBr3 Films for Efficient Light-Emitting Diodes

Mingue Shin et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

添加到收藏夹

Article Optics

Large-area near-infrared perovskite light-emitting diodes

Xiaofei Zhao et al.

NATURE PHOTONICS (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Efficient Flexible Inorganic Perovskite Light-Emitting Diodes Fabricated with CsPbBr3 Emitters Prepared via Low-Temperature in Situ Dynamic Thermal Crystallization

Chen Chen et al.

NANO LETTERS (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Scalable All-Evaporation Fabrication of Efficient Light-Emitting Diodes with Hybrid 2D-3D Perovskite Nanostructures

Yu Fu et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

添加到收藏夹

Article Chemistry, Applied

Efficient and stable planar all-inorganic perovskite solar cells based on high-quality CsPbBr3 films with controllable morphology

Xiaojing Wan et al.

JOURNAL OF ENERGY CHEMISTRY (2020)

添加到收藏夹

Article Multidisciplinary Sciences

Full-color active-matrix organic light-emitting diode display on human skin based on a large-area MoS2 backplane

Minwoo Choi et al.

SCIENCE ADVANCES (2020)

添加到收藏夹

Article Chemistry, Physical

Effects of Postdeposition Annealing on the Luminescence of Mixed-Phase CsPb2Br5/CsPbBr3 Thin Films

Sebastian Caicedo-Davila et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2020)

添加到收藏夹

Review Nanoscience & Nanotechnology

Two-dimensional materials for next-generation computing technologies

Chunsen Liu et al.

NATURE NANOTECHNOLOGY (2020)

添加到收藏夹

Article Engineering, Electrical & Electronic

Large-scale flexible and transparent electronics based on monolayer molybdenum disulfide field-effect transistors

Na Li et al.

NATURE ELECTRONICS (2020)

添加到收藏夹

Article Multidisciplinary Sciences

Logic-in-memory based on an atomically thin semiconductor

Guilherme Migliato Marega et al.

NATURE (2020)

添加到收藏夹

Article Engineering, Electrical & Electronic

Efficient CsPbBr3 Inorganic Perovskite Light-Emitting Diodes via Lewis Acid-Base Reaction with Organic Small Molecule mCP

Juntao Hu et al.

ACS APPLIED ELECTRONIC MATERIALS (2020)

添加到收藏夹

Review Chemistry, Multidisciplinary

Perovskites for Next-Generation Optical Sources

Li Na Quan et al.

CHEMICAL REVIEWS (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

CsPbBr3 Perovskite Powder, a Robust and Mass-Producible Single-Source Precursor: Synthesis, Characterization, and Optoelectronic Applications

Chun-Yuan Huang et al.

ACS OMEGA (2019)

添加到收藏夹

Article Chemistry, Physical

Green-Emitting Powders of Zero-Dimensional Cs4PbBr6: Delineating the Intricacies of the Synthesis and the Origin of Photoluminescence

Aniruddha Ray et al.

CHEMISTRY OF MATERIALS (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

High-Throughput Combinatorial Optimizations of Perovskite Light-Emitting Diodes Based on All-Vacuum Deposition

Jinghui Li et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Ultrastable and Reversible Fluorescent Perovskite Films Used for Flexible Instantaneous Display

Yeshu Tan et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Surface-Functionalization-Mediated Direct Transfer of Molybdenum Disulfide for Large-Area Flexible Devices

Sachin M. Shinde et al.

ADVANCED FUNCTIONAL MATERIALS (2018)

添加到收藏夹

Article Multidisciplinary Sciences

Flexible active-matrix organic light-emitting diode display enabled by MoS2 thin-film transistor

Minwoo Choi et al.

SCIENCE ADVANCES (2018)

添加到收藏夹

Article Nanoscience & Nanotechnology

Hole-Injection Layer-Free Perovskite Light-Emitting Diodes

Zhifeng Shi et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

All-Solution-Processed Pure Formamidinium-Based Perovskite Light-Emitting Diodes

Juanhong Wang et al.

ADVANCED MATERIALS (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Transition Metal Dichalcogenide-Based Transistor Circuits for Gray Scale Organic Light-Emitting Displays

Sanghyuck Yu et al.

ADVANCED FUNCTIONAL MATERIALS (2017)

添加到收藏夹

Article Nanoscience & Nanotechnology

Vacuum-Deposited Organometallic Halide Perovskite Light-Emitting Devices

Kai-Ming Chiang et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

添加到收藏夹

Article Chemistry, Physical

Low-temperature solution-processed wavelength-tunable perovskites for lasing

Guichuan Xing et al.

NATURE MATERIALS (2014)

添加到收藏夹

Article Nanoscience & Nanotechnology

Bright light-emitting diodes based on organometal halide perovskite

Zhi-Kuang Tan et al.

NATURE NANOTECHNOLOGY (2014)

添加到收藏夹

Article Multidisciplinary Sciences

Few-layer molybdenum disulfide transistors and circuits for high-speed flexible electronics

Rui Cheng et al.

NATURE COMMUNICATIONS (2014)

添加到收藏夹

Article Physics, Applied

High mobility and high on/off ratio field-effect transistors based on chemical vapor deposited single-crystal MoS2 grains

Wei Wu et al.

APPLIED PHYSICS LETTERS (2013)

添加到收藏夹

Article Chemistry, Multidisciplinary

Intrinsic Electronic Transport Properties of High-Quality Monolayer and Bilayer MoS2

Britton W. H. Baugher et al.

NANO LETTERS (2013)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.