☆ 4.7 Article

Evolutionary algorithm-based integrated design of material-structural microwave absorption using material extrusion

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2024)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Multidisciplinary

High-temperature multispectral stealth metastructure from the microwave-infrared compatible design

Zhimin An et al.

Summary: Microwave and infrared stealth technology are crucial for the development of military equipment and national defense. However, as high Mach number weapons emerge, the need for new high-temperature multispectral compatible stealth materials becomes urgent. This paper proposes a new multispectral stealth metastructure that achieves high temperature microwave absorption and infrared stealth simultaneously. The metastructure is optimized using the Large-Mutation Genetic Algorithm (LMGA) and includes a high-temperature resistant patterned resistive film (PRF) to dissipate microwave energy and a dual-regulation thermal insulation skeleton and low emissivity infrared metasurface for high temperature infrared stealth. The research provides a way to design microwave infrared compatible stealth materials with multifunctionality.

COMPOSITES PART B-ENGINEERING (2023)

添加到收藏夹

Article Materials Science, Composites

Vehicle metastructure skin designed by overall-parameter evolutionary optimization for broadband microwave absorption

Mengtong Shan et al.

Summary: The metastructure fabricated by electromagnetic lossy materials has shown great potential in achieving broadband microwave absorption for civil and military applications. However, the complex surface structure of the metastructure limits its deployment on vehicles and aircraft due to poor aerodynamic properties and turbulence generation. To address this issue, a vehicle metastructure skin (VMS) is proposed to maintain a smooth surface while preserving the broadband absorption performance. An evolutionary optimization scheme with quartz fiber reinforced composite (QFRC) as the aerodynamic skin is introduced to solve the impedance mismatch between the metastructure and air. The fabricated VMS demonstrates -10 dB absorption performance in the frequency range of 1.26-25.8 GHz, with extensional absorption in the low frequency range below 2 GHz and wide-angle oblique broadband absorption in TE and TM polarization. The proposed optimization strategy effectively solves the aerodynamic problems caused by surface turbulence in the secondary structure of the metastructure.

COMPOSITES SCIENCE AND TECHNOLOGY (2023)

添加到收藏夹

Article Engineering, Manufacturing

Functional additive manufacturing of large-size metastructure with efficient electromagnetic absorption and mechanical adaptation

Ying Zhang et al.

Summary: Broadband microwave absorption is important for electromagnetic compatibility, radiation protection, and radar detection disguise. Traditional methods struggle to create large, curved structures for this purpose. However, the combination of material extrusion and high-speed printing can effectively manufacture large-size metastructures for broadband microwave absorption. This approach overcomes impedance mismatch and achieves both absorption and load-bearing performance.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2023)

添加到收藏夹

Review Chemistry, Physical

2D MXene Nanomaterials: Synthesis, Mechanism, and Multifunctional Applications in Microwave Absorption

Xiaomeng Guan et al.

Summary: This article reviews the construction strategies, electromagnetic wave conversion mechanism, and applications of MXene materials, highlighting their unique layered structure and outstanding chemical and physical properties. Through meticulous design and interdisciplinary approach, MXene materials are expected to become one of the smart tunable wave absorbers.

SMALL STRUCTURES (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Multilaminate metastructure for high-temperature radar-infrared bi-stealth: Topological optimization and near-room-temperature synthesis

Zhimin An et al.

Summary: This study achieved a multifunctional stealth technology under high temperature conditions by combining topological optimization and papermaking method, with the material exhibiting an effective bandwidth of 3.1 GHz and absorption peak of -25.9 dB at 1000 degrees Celsius, and reducing the radiation temperature of an object from 1200 degrees Celsius to 340 degrees Celsius.

MATTER (2022)

添加到收藏夹

Review Chemistry, Multidisciplinary

Vat photopolymerization 3D printing for advanced drug delivery and medical device applications

Xiaoyan Xu et al.

Summary: Vat photo-polymerization 3D printing technology offers high resolution and fast printing speeds, making it ideal for creating custom medical devices and drug delivery systems. Its adoption is expected to advance personalized healthcare systems.

JOURNAL OF CONTROLLED RELEASE (2021)

添加到收藏夹

Article Engineering, Multidisciplinary

3D-printing of architectured short carbon fiber-geopolymer composite

Siqi Ma et al.

Summary: A novel approach combining 3D printing technology and Bouligand structure design was used to fabricate lightweight, high strength, and superior toughness CsfGP composites, showing outstanding mechanical properties with consistent fiber orientation distribution and sophisticated interfaces.

COMPOSITES PART B-ENGINEERING (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

High entropy rare earth hexaborides/tetraborides (HE REB6/HE REB4) composite powders with enhanced electromagnetic wave absorption performance

Weiming Zhang et al.

Summary: The increasing electromagnetic hazards from the massive usage of electromagnetic technology have led to the need for high-performance electromagnetic wave absorbing materials. Composite construction with high permittivity, high permeability, and impedance matching has been widely used, but challenges like high-temperature stability, oxidation, and corrosion resistance still need to be addressed. High entropy hexaborides/tetraborides composites show promising potential in enhancing dielectric and magnetic losses for improved electromagnetic wave absorption properties.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)

添加到收藏夹

Article Mechanics

Predication of the in-plane mechanical properties of continuous carbon fibre reinforced 3D printed polymer composites using classical laminated-plate theory

Khalid Saeed et al.

Summary: This study evaluated the in-plane mechanical properties of continuous carbon fiber reinforced thermoplastic polyamide composite manufactured using a 3D printing system and found that the modulus of elasticity and tensile strength were significantly improved. The influence of fiber orientation on mechanical properties was investigated, and the experimentally determined values can be used to predict the performance of 3D printed components.

COMPOSITE STRUCTURES (2021)

添加到收藏夹

Article Multidisciplinary Sciences

Closed-loop recycling of polyethylene-like materials

Manuel Haeussler et al.

Summary: Plastics are crucial components in modern technology but are often disposed of after use. Chemical recycling offers an alternative to retain high-performance properties, but traditional polyethylene poses challenges due to its inert nature and structure.

NATURE (2021)

添加到收藏夹

Article Engineering, Multidisciplinary

UV etched random copolymer membrane coated PBO fibers/cyanate ester wave-transparent laminated composites

Lin Tang et al.

Summary: The UV-treated PBO fibers combined with AEAF-co-BADCy resin exhibit excellent interfacial compatibility and comprehensive performance, with high strength, low complex permittivity, and improved wave transparency.

COMPOSITES PART B-ENGINEERING (2021)

添加到收藏夹

Article Mechanics

Impact-resistant multilayered metastructure for broadband microwave absorption designed by evolutionary optimization

Yiyue Lin et al.

Summary: The study optimized an impact-resistant multilayered metastructure for broadband microwave absorption using evolutionary algorithms, successfully integrating it into highly effective impact-resistant armor for shrapnel impact defense in explosive environments. The -10 dB absorption bandwidth in the 2.7-18 GHz range was achieved with a ballistic limit velocity of 690 m/s and specific energy absorption (SEA) of 23.54 J•m2/kg in penetration tests.

COMPOSITE STRUCTURES (2021)

添加到收藏夹

Article Engineering, Manufacturing

Porous network carbon nanotubes/chitosan 3D printed composites based on ball milling for electromagnetic shielding

Xiaoyuan Pei et al.

Summary: The study prepared CNTs/CS composites with porous network structures using 3D printing technology, showing excellent EMI shielding effectiveness and significant electromagnetic wave absorption. The influence of pore size and conductivity of the composites on EMI shielding performance was analyzed, with conductivity having a greater impact on EMI shielding effectiveness.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2021)

添加到收藏夹

Article Engineering, Multidisciplinary

Multifunctional performance of carbon nanotubes and graphene nanoplatelets reinforced PEEK composites enabled via FFF additive manufacturing

M. F. Arif et al.

COMPOSITES PART B-ENGINEERING (2020)

添加到收藏夹

Article Materials Science, Composites

Optimization of flexible multilayered metastructure fabricated by dielectric-magnetic nano lossy composites with broadband microwave absorption

Yixing Huang et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2020)

添加到收藏夹

Review Chemistry, Multidisciplinary

Recent Progress on Polymer Materials for Additive Manufacturing

Lisa Jiaying Tan et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

添加到收藏夹

Article Polymer Science

Effects of Carbonyl Iron Powder (CIP) Content on the Electromagnetic Wave Absorption and Mechanical Properties of CIP/ABS Composites

Wenwen Lai et al.

POLYMERS (2020)

添加到收藏夹

Article Multidisciplinary Sciences

Continuous 3D printing from one single droplet

Yu Zhang et al.

NATURE COMMUNICATIONS (2020)

添加到收藏夹

Article Chemistry, Physical

3D printing-directed auxetic Kevlar aerogel architectures with multiple functionalization options

Qingqing Cheng et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

添加到收藏夹

Article Engineering, Electrical & Electronic

Dual-Interfacial Polarization Enhancement to Design Tunable Microwave Absorption Nanofibers of SiC@C@PPy

Chang Xu et al.

ACS APPLIED ELECTRONIC MATERIALS (2020)

添加到收藏夹

Article Engineering, Environmental

3D-printed oblique honeycomb Al2O3/SiCw structure for electromagnetic wave absorption

Hui Mei et al.

CHEMICAL ENGINEERING JOURNAL (2019)

添加到收藏夹

Article Chemistry, Physical

Multifunctional broadband microwave absorption of flexible graphene composites

Kai-Lun Zhang et al.

CARBON (2019)

添加到收藏夹

Article Chemistry, Physical

Flexible electromagnetic wave absorbing composite based on 3D rGO-CNT-Fe3O4 ternary films

Jinsong Li et al.

CARBON (2018)

添加到收藏夹

Article Materials Science, Composites

Multi-scale design of electromagnetic composite metamaterials for broadband microwave absorption

Yixing Huang et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Electromagnetic interference shielding effectiveness of ABS carbon-based composites manufactured via fused deposition modelling

D. P. Schmitz et al.

MATERIALS TODAY COMMUNICATIONS (2018)

添加到收藏夹

Article Engineering, Industrial

User entrepreneur business models in 3D printing

Patrick Holzmann et al.

JOURNAL OF MANUFACTURING TECHNOLOGY MANAGEMENT (2017)

添加到收藏夹

Article Nanoscience & Nanotechnology

Constructing Repairable Meta-Structures of Ultra-Broad-Band Electromagnetic Absorption from Three-Dimensional Printed Patterned Shells

Wei-Li Song et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Electrically conductive filament for 3D-printed circuits and sensors

Sen Wai Kwok et al.

APPLIED MATERIALS TODAY (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

3D printed anisotropic dielectric composite with meta-material features

D. V. Isakov et al.

MATERIALS & DESIGN (2016)

添加到收藏夹

Article Multidisciplinary Sciences

Microwave dielectric characterisation of 3D-printed BaTiO3/ABS polymer composites

F. Castles et al.

SCIENTIFIC REPORTS (2016)

添加到收藏夹

Article Chemistry, Physical

Influence of Layer Thickness and Raster Angle on the Mechanical Properties of 3D-Printed PEEK and a Comparative Mechanical Study between PEEK and ABS

Wenzheng Wu et al.

MATERIALS (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

Thermo-mechanical properties of a highly filled polymeric composites for Fused Deposition Modeling

M. Nikzad et al.

MATERIALS & DESIGN (2011)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.