☆ 4.7 Article

Elucidating links between the mechanical performance of flax fibres and their structural defects

INDUSTRIAL CROPS AND PRODUCTS (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Agricultural Engineering

Exploiting synchrotron X-ray tomography for a novel insight into flax-fibre defects ultrastructure

Delphine Quereilhac et al.

Summary: Flax fibres are valuable reinforcements for composites, but defects called kink-bands might affect their properties. This study investigates the pores within the kink-band using X-ray microtomography, revealing their organization and correlation with the fiber's ultrastructure. Local increase in porosity was found in severe defect zones along the fiber.

INDUSTRIAL CROPS AND PRODUCTS (2023)

添加到收藏夹

Article Materials Science, Multidisciplinary

Elementary Liber Fibres Characterisation: Bias from the Noncylindricity and Morphological Evolution along the Fibre

Marie Gregoire et al.

Summary: In this study, the influence of noncircularity and cross-sectional area evolution on the measurement of mechanical properties of fibres is investigated. The results show that the circular assumption underestimates the elastic modulus and stress at failure for fibres with noncircular cross sections. Additionally, a numerical model is developed to accurately determine the elastic modulus of fibres with elliptical cross sections. Recommendations are made to better account for the variability along a fibre in cross-sectional area evaluation.

FIBERS (2023)

添加到收藏夹

Article Agricultural Engineering

On the origin of bast fiber dislocations in flax

L. Kozlova et al.

Summary: Quantitative estimation of dislocations in flax bast fibers revealed that defects mainly occur during scutching, with no dislocations found in fibers within the stem. This suggests that disruption of flax stem integrity and mechanical treatments are the main factors in fiber deformation.

INDUSTRIAL CROPS AND PRODUCTS (2022)

添加到收藏夹

Article Materials Science, Paper & Wood

Process optimization and comprehensive utilization of recyclable deep eutectic solvent for the production of ramie cellulose fibers

Guyu Lin et al.

Summary: Deep eutectic solvents (DESs) are emerging green chemical reagents that are non-toxic, biodegradable, environmentally friendly, and easy to access. This study investigated the optimal extraction conditions and solvent recovery for DESs constituted of choline chloride and urea used in the extraction of ramie cellulose fibers. The results showed that reusable degumming solution could effectively remove non-cellulosic components even after multiple reuse, fulfilling the requirements for spinning process.

CELLULOSE (2022)

添加到收藏夹

Article Engineering, Manufacturing

Influence of industrial processing parameters on the effective properties of long aligned European hemp fibres in composite materials

Xavier Gabrion et al.

Summary: This study investigates the influence of agronomic features and processing stages on the tensile properties of hemp fibers. Results show that the fiber properties can be improved during processing, and hemp can achieve similar performance to flax fibers.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2022)

添加到收藏夹

Review Chemistry, Applied

Nanocrystalline cellulose extracted from bast fibers: Preparation, characterization, and application

Pingzhang Shen et al.

Summary: Nanocrystalline cellulose (NCC) has attracted great attention due to its exceptional properties. This paper summarizes the research progress of NCC extracted from bast fibers and compares different preparation methods. The characterization and applications of NCC in various fields are systematically introduced. Furthermore, current challenges and future outlook are discussed.

CARBOHYDRATE POLYMERS (2022)

添加到收藏夹

Article Agricultural Engineering

Exploring the effect of relative humidity on dynamic evolution of flax fibre's microfibril angle through in situ tensile tests under synchrotron X-ray diffraction

Lucile Nuez et al.

Summary: The tensile properties of elementary flax fibres were investigated using in situ Synchrotron X-ray diffraction. The results showed that the cellulose microfibril angle (MFA) decreased with increasing applied loading, indicating a partial realignment of the microfibrils. The MFA at fracture point decreased by 11% to 15% compared to the initial MFA. Additionally, the strain at break of the fibres increased with increasing relative humidity.

INDUSTRIAL CROPS AND PRODUCTS (2022)

添加到收藏夹

Article Agricultural Engineering

Elucidating the formation of structural defects in flax fibres through synchrotron X-ray phase-contrast microtomography

Alain Bourmaud et al.

Summary: This study used cutting-edge techniques to explore the morphology of flax stems and fibers and found that various extracted fibers contained significant amounts of kink-bands. However, no kink-bands were observed at the scale of green or retted stems. This suggests that the stress experienced by plants during their growth is not enough to generate these structural defects, and they are only revealed after mechanical extraction of the fibers.

INDUSTRIAL CROPS AND PRODUCTS (2022)

添加到收藏夹

Article Agricultural Engineering

Comparing flax and hemp fibres yield and mechanical properties after scutching/hackling processing

Marie Gregoire et al.

Summary: This study aims to establish process parameters that maximize the yield of long line fibers from hemp, with results indicating that very high long fiber yields can be obtained at the laboratory scale. The study demonstrates that hemp has the potential to provide equivalent amounts of long fibers per hectare as flax, with slightly lower tensile properties.

INDUSTRIAL CROPS AND PRODUCTS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Novel Insight into the Intricate Shape of Flax Fibre Lumen

Emmanuelle Richely et al.

Summary: This study investigates the shape and variations of flax fiber lumen using a combination of characterization techniques, highlighting the difficulty of defining a single geometric reference for the lumen. The intricate lumen shape may originate from factors such as cell wall thickening, cell death, and post mortem processing. Observations following tensile testing reveal the combined effect of geometrical inhomogeneities and intricate lumen porosity in driving fiber failure.

FIBERS (2021)

添加到收藏夹

Article Agricultural Engineering

Investigation of the potential of hemp fibre straws harvested using a combine machine for the production of technical load-bearing textiles

M. Gregoire et al.

INDUSTRIAL CROPS AND PRODUCTS (2020)

添加到收藏夹

Article Agricultural Engineering

Microfibril angle of elementary flax fibres investigated with polarised second harmonic generation microscopy

Alessia Melelli et al.

INDUSTRIAL CROPS AND PRODUCTS (2020)

添加到收藏夹

Article Engineering, Manufacturing

Analysis of the morphometric variations in natural fibres by automated laser scanning: Towards an efficient and reliable assessment of the cross-sectional area

William Garat et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2018)

添加到收藏夹

Article Agricultural Engineering

Influence of flax fibre variety and year-to-year variability on composite properties

Katharina Haag et al.

INDUSTRIAL CROPS AND PRODUCTS (2017)

添加到收藏夹

Article Multidisciplinary Sciences

Damage mechanisms in defected natural fibers

Johnny Beaugrand et al.

SCIENTIFIC REPORTS (2017)

添加到收藏夹

Article Agricultural Engineering

Environmental impact assessment of end of life options for flax-MAPP composites

Farida Bensadoun et al.

INDUSTRIAL CROPS AND PRODUCTS (2016)

添加到收藏夹

Article Agricultural Engineering

Assessing the susceptibility of hemp fibre to the formation of dislocations during processing

Albert Hernandez-Estrada et al.

INDUSTRIAL CROPS AND PRODUCTS (2016)

添加到收藏夹

Article Materials Science, Textiles

Analysis of oxidized cellulose introduced into ramie fiber by oxidation degumming

Zhaoling Li et al.

TEXTILE RESEARCH JOURNAL (2015)

添加到收藏夹

Article Engineering, Manufacturing

Nonlinear tensile behaviour of elementary hemp fibres. Part I: Investigation of the possible origins using repeated progressive loading with in situ microscopic observations

Vincent Placet et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2014)

添加到收藏夹

Article Agricultural Engineering

Elementary flax fibre tensile properties: Correlation between stress-strain behaviour and fibre composition

Anaele Lefeuvre et al.

INDUSTRIAL CROPS AND PRODUCTS (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

Investigation of the internal structure of hemp fibres using optical coherence tomography and Focused Ion Beam transverse cutting

Vincent Placet et al.

JOURNAL OF MATERIALS SCIENCE (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

Average tensile properties of French elementary flax fibers

Christophe Baley et al.

MATERIALS LETTERS (2014)

添加到收藏夹

Article Instruments & Instrumentation

The PyHST2 hybrid distributed code for high speed tomographic reconstruction with iterative reconstruction and a priori knowledge capabilities

Alessandro Mirone et al.

NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS (2014)

添加到收藏夹

Article Agricultural Engineering

Relationships between micro-fibrillar angle, mechanical properties and biochemical composition of flax fibers

Alain Bourmaud et al.

INDUSTRIAL CROPS AND PRODUCTS (2013)

添加到收藏夹

Article Agricultural Engineering

Mechanical processing of bast fibres: The occurrence of damage and its effect on fibre structure

Tuomas Hanninen et al.

INDUSTRIAL CROPS AND PRODUCTS (2012)

添加到收藏夹

Article Biochemical Research Methods

Fiji: an open-source platform for biological-image analysis

Johannes Schindelin et al.

NATURE METHODS (2012)

添加到收藏夹

Article Materials Science, Multidisciplinary

Strength variability of single flax fibres

Mustafa Aslan et al.

JOURNAL OF MATERIALS SCIENCE (2011)

添加到收藏夹

Article Materials Science, Multidisciplinary

Influence of the sampling area of the stem on the mechanical properties of hemp fibers

Antoine Duval et al.

MATERIALS LETTERS (2011)

添加到收藏夹

Article Materials Science, Multidisciplinary

Dislocations in single hemp fibres-investigations into the relationship of structural distortions and tensile properties at the cell wall level

Lisbeth G. Thygesen et al.

JOURNAL OF MATERIALS SCIENCE (2007)

添加到收藏夹

Article Engineering, Manufacturing

Optimising industrial hemp fibre for composites

K. L. Pickering et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2007)

添加到收藏夹

Article Agricultural Engineering

Visualisation of dislocations in hemp fibres: A comparison between scanning electron microscopy (SEM) and polarized light microscopy (PLM)

Lisbeth G. Thygesen et al.

INDUSTRIAL CROPS AND PRODUCTS (2006)

添加到收藏夹

Article Materials Science, Multidisciplinary

Influence of kink bands on the tensile strength of flax fibers

C Baley

JOURNAL OF MATERIALS SCIENCE (2004)

添加到收藏夹

Article Engineering, Manufacturing

Analysis of the flax fibres tensile behaviour and analysis of the tensile stiffness increase

C Baley

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2002)

添加到收藏夹

Review Materials Science, Paper & Wood

Dislocations in pulp fibres - their origin, characteristics and importance - a review

K Nyholm et al.

NORDIC PULP & PAPER RESEARCH JOURNAL (2001)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.