☆ 4.4 Article

Synthesis and Characterization of Carboxymethylated Locust Bean Gum-co-poly(SA)-cl-poly(MBA) pH Responsive Hydrogel for Controlled Drug Delivery of Metformin Hydrochloride

CHEMISTRYSELECT (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Polymer Science

Octenyl succinate acidolysis carboxymethyl sesbania gum with high esterification degree: preparation, characterization and performance

Hongbo Tang et al.

Summary: In this study, high esterification of acidolysis carboxymethyl sesbania gum was achieved using 1-butyl-3-methylimidazolium chloride as a solvent, octenyl succinic anhydride as an esterifying agent, and pyridine as a catalyst. The derivatives obtained exhibited good emulsifying capacity and stability. Acidolysis had a different effect on the crystalline structure of sesbania gum compared to carboxymethylation. Esterification completely destroyed the crystalline structure, resulting in rougher surface of the gum particles. The storage modulus of sesbania gum and its derivatives increased with angular frequency, but the increase was different for carboxymethyl sesbania gum. The introduction of carboxymethyl and octenyl succinate groups led to the appearance of C=O and C=C bonds. Sesbania gum not only showed excellent hydrophilicity and permeability due to the presence of hydroxide radicals, but it was also non-toxic and biodegradable.

POLYMER BULLETIN (2023)

添加到收藏夹

Article Polymer Science

Synthesis and characterization of semi-interpenetrating polymer network hydrogel based on polyacrylic acid/polyallylamine and its application in wastewater remediation

Mohammad Reza Jozaghkar et al.

Summary: This study successfully synthesized novel semi-IPN hydrogels with different molar ratios of components and investigated the influence of various factors on their properties. The results showed that the optimum ratios, pH values, and temperatures could achieve maximum swelling degrees, and the semi-IPN hydrogels exhibited excellent adsorption capacity for treating wastewater.

POLYMER BULLETIN (2023)

添加到收藏夹

Article Polymer Science

Tamarind/β-CD-g-poly (MAA) pH responsive hydrogels for controlled delivery of Capecitabine: fabrication, characterization, toxicological and pharmacokinetic evaluation

Umaira Rehman et al.

Summary: The study developed pH responsive tamarind/-CD-g-poly (MAA) hydrogels for controlled delivery of capecitabine, an anticancer drug for colorectal cancer. The hydrogel system showed good thermal stability, compatibility of components, and controlled drug release properties. In-vivo studies demonstrated sustained release of capecitabine with increased half-life and AUC. The hydrogels are recommended for biocompatible pH responsive carrier system for controlled and targeted drug delivery.

JOURNAL OF POLYMER RESEARCH (2023)

添加到收藏夹

Article Chemistry, Multidisciplinary

Polysaccharide gum based network hydrogels for controlled drug delivery of ceftriaxone: Synthesis, characterization and biomedical evaluations

Baljit Singh et al.

Summary: In this study, dietary fibers gum acacia (GA) and tragacanth gum (TG) were utilized to design a drug delivery (DD) carrier that can degrade in the colon. The resulting product was a polyacrylamide (poly(AAm)) hydrogel network. Various characterization techniques confirmed the formation of the grafted product and its heterogeneous and amorphous nature. The release of the antibiotic drug ceftriaxone from the network hydrogel was slow and controlled, demonstrating its potential for site-specific drug delivery.

RESULTS IN CHEMISTRY (2023)

添加到收藏夹

Article Biochemistry & Molecular Biology

Drug release and thermal properties of magnetic cobalt ferrite (CoFe2O4) nanocomposite hydrogels based on poly(acrylic acid-g-N-isopropyl acrylamide) grafted onto gum ghatti

Pragnesh N. Dave et al.

Summary: The study aimed to understand the drug release characteristics of Gg-cl-poly(NIPA-co-AA)/CoFe2O4 hydrogel containing metformin hydrochloride. Gum ghatti-based hydrogel with acrylic acid and N-isopropylacrylamide as graft copolymers was used for controlled release. The hydrogel was characterized using FTIR, SEM, TGA, and DSC. Drug release occurred through diffusion and polymer relaxation, regardless of drug solubility. In vitro release studies at different pH values showed pH 7.4 as the optimal pH for maximum release. The hydrogel loaded with metformin hydrochloride exhibited sustained release, fitting the Korsmeyer-Peppas model with a specific case II transport mechanism.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2023)

添加到收藏夹

Review Biotechnology & Applied Microbiology

Natural gums and their derivatives based hydrogels: in biomedical, environment, agriculture, and food industry

Meenakshi Tanwar et al.

Summary: Hydrogels based on natural gums and their chemical derivatives have attracted great interest in various fields including pharmaceutical, food, cosmetics, and environmental remediation due to their economic viability, sustainability, nontoxicity, biodegradability, and biocompatibility. This review summarizes the past work on chemically derivatizing natural gums from plants, microorganisms, and seaweeds into novel biomaterials for tissue engineering and drug delivery. The review also discusses the applications of these hydrogels in various fields such as biomedical, food and agriculture, textile, cosmetics, water purification, remediation, and separation.

CRITICAL REVIEWS IN BIOTECHNOLOGY (2023)

添加到收藏夹

Article Materials Science, Textiles

Influences of monomer compatibility on sizing performance of locust bean gum-g-P(MA-co-AA)

Enqi Jin et al.

Summary: Grafting MA and AA onto the molecular chains of LBG is an effective method to improve the application performance of vegetable gelatin sizes, such as the toughness of sizing film and adhesion to polyester fibers. The LBG-g-P(AA-co-MA) sizes show the best overall performance at the appropriate feed molar ratio of 3/7.

JOURNAL OF THE TEXTILE INSTITUTE (2022)

添加到收藏夹

Review Biochemistry & Molecular Biology

A review on challenges and issues with carboxymethylation of natural gums: The widely used excipients for conventional and novel dosage forms

Hemant Ramachandra Badwaik et al.

Summary: This review discusses the properties and issues of natural gums, as well as the research and applications of carboxymethylation. The article provides detailed information on the application of carboxymethyl gums as drug delivery carriers and briefly introduces their potential in tissue engineering and cell delivery.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2022)

添加到收藏夹

Article Nuclear Science & Technology

In Vitro Release of Metformin HCl from Polyvinyl Alcohol (PVA)-Gelatin Hydrogels Prepared by Gamma Irradiation

Hariyanti et al.

Summary: The aim of this study was to prepare a polyvinyl alcohol (PVA) - gelatin-based hydrogel by gamma-rays irradiation for the immobilization of Metformin HCl (MH). The results showed that as the gelatin concentration increased, the gel fraction increased and water absorption decreased, resulting in a decrease in the cumulative drug released. The hydrogel exhibited a heterogeneous porous structure and can be considered as a matrix for controlled drug release, which is safe for humans.

ATOM INDONESIA (2022)

添加到收藏夹

Article Chemistry, Applied

Carboxymethyl konjac glucomannan-chitosan complex nanogels stabilized double emulsions incorporated into alginate hydrogel beads for the encapsulation, protection and delivery of probiotics

Xiaoqing Ding et al.

Summary: In this study, double emulsions encapsulated by calcium-alginate hydrogel beads system (ACGs) were developed for intestinal-targeted delivery of probiotics. The experimental results showed that ACG-2 and ACG-3 hydrogel beads had sustained release properties in simulated intestinal fluid and high cell viability. Moreover, the alginate concentration in ACGs hydrogel beads influenced the swelling behavior and structure, thus mediating the release of probiotics.

CARBOHYDRATE POLYMERS (2022)

添加到收藏夹

Article Multidisciplinary Sciences

Development, characterization and In-vitro evaluation of guar gum based new polymeric matrices for controlled delivery using metformin HCl as model drug

Akram Ashames et al.

Summary: In this study, pH-responsive GG-MAA-AMPS hydrogel delivery system was successfully prepared and characterized. The hydrogels exhibited good drug loading and release behavior, and showed safety in oral tolerability test. These findings suggest that GG-MAA-AMPS hydrogel could be a potential carrier for metformin HCl and other hydrophilic drugs.

PLOS ONE (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Development and characterization of pH-sensitive chondroitin sulfate-co-poly(acrylic acid) hydrogels for controlled release of diclofenac sodium

Muhammad Suhail et al.

Summary: The study successfully prepared pH-sensitive chondroitin sulfate-co-poly (acrylic acid) hydrogels for controlled release of diclofenac sodium. The hydrogels showed high stability and controlled release effect, with high swelling and drug release rate at pH 7.4.

JOURNAL OF SAUDI CHEMICAL SOCIETY (2021)

添加到收藏夹

Article Polymer Science

Relationship between Structure and Rheology of Hydrogels for Various Applications

Gorjan Stojkov et al.

Summary: This review focuses on the correlation between the rheological characteristics of hydrogels and their potential applications. Various rheological tests are described and the results are reported, with a discussion on the most prevalent applications of hydrogels.

GELS (2021)

添加到收藏夹

Article Biochemistry & Molecular Biology

Fast and highly efficient removal of dye from aqueous solution using natural locust bean gum based hydrogels as adsorbent

Sadanand Pandey et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2020)

添加到收藏夹

Article Biochemistry & Molecular Biology

Carbamoylethyl locust bean gum: Synthesis, characterization and evaluation of its film forming potential

Ram Sarup Singh et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2020)

添加到收藏夹

Article Biochemistry & Molecular Biology

Graft copolymerization of polyvinylpyrollidone onto Azadirachta indica gum polysaccharide in the presence of crosslinker to develop hydrogels for drug delivery applications

Baljit Singh et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2020)

添加到收藏夹

Article Polymer Science

Nanoporous Sodium Carboxymethyl Cellulose-g-poly (Sodium Acrylate)/FeCl3 Hydrogel Beads: Synthesis and Characterization

Bijender Kumar et al.

GELS (2020)

添加到收藏夹

Article Biochemistry & Molecular Biology

Encapsulation of ciprofloxacin within modified xanthan gum- chitosan based hydrogel for drug delivery

Demiana H. Hanna et al.

BIOORGANIC CHEMISTRY (2019)

添加到收藏夹

Article Engineering, Environmental

Synthesis and Characterization of a Novel pH-Sensitive Aluminum Crosslinked Carboxymethyl Tragacanth Beads for Extended and Enteric Drug Delivery

Anand Kumar Veeramachineni et al.

JOURNAL OF POLYMERS AND THE ENVIRONMENT (2019)

添加到收藏夹

Article Biochemistry & Molecular Biology

Physicochemical, thermal and rheological properties of synthesized carboxymethyl tara gum (Caesalpinia spinosa)

Monique Barreto Santos et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Understanding the Significance of Microwave Radiation for the Graft Copolymerization of Acrylamide on Carboxymethyl Xanthan Gum

Hemant R. Badwaik et al.

CURRENT MICROWAVE CHEMISTRY (2019)

添加到收藏夹

Article Multidisciplinary Sciences

Esterification of citric acid with locust bean gum

Wuryanto Hadinugroho et al.

HELIYON (2019)

添加到收藏夹

Article Biochemistry & Molecular Biology

Fabrication and characterization of genipin cross-linked chitosan/gelatin hydrogel for pH-sensitive, oral delivery of metformin with an application of response surface methodology

Muhammad Ubaid et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2018)

添加到收藏夹

Article Biochemistry & Molecular Biology

Carboxymethyl fenugreek gum: Rheological characterization and as a novel binder for silicon anode of lithium-ion batteries

Liewei Qiu et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2018)

添加到收藏夹

Article Chemistry, Applied

Synthesis of a new superabsorbent copolymer based on acrylic acid grafted onto carboxymethyl tragacanth

Mohammad Behrouzi et al.

CARBOHYDRATE POLYMERS (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Synthesis of interpenetrating network hydrogel from (gum copal alcohols-collagen)-co-poly(acrylamide) and acrylic acid: Isotherms and kinetics study for removal of methylene blue dye from aqueous solution

Savneet Kaur et al.

MATERIALS CHEMISTRY AND PHYSICS (2018)

添加到收藏夹

Article Biochemistry & Molecular Biology

Carboxymethyl sesbania gum: Synthesis, characterization and evaluation for drug delivery

Shakuntla Verma et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2017)

添加到收藏夹

Article Biochemistry & Molecular Biology

Influence of graphene-oxide nanosheets impregnation on properties of sterculia gum-polyacrylamide hydrogel formed by radiation induced polymerization

Baljit Singh et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2017)

添加到收藏夹

Article Chemistry, Applied

Evaluation of carboxymethyl moringa gum as nanometric carrier

Rimpy et al.

CARBOHYDRATE POLYMERS (2017)

添加到收藏夹

Article Chemistry, Applied

In vitro release of metformin hydrochloride from sodium alginate/polyvinyl alcohol hydrogels

Fabian Martinez-Gomez et al.

CARBOHYDRATE POLYMERS (2017)

添加到收藏夹

Article Chemistry, Applied

Effect of pH on the rheological properties of borate crosslinked hydroxypropyl guar gum hydrogel and hydroxypropyl guar gum

Shibin Wang et al.

CARBOHYDRATE POLYMERS (2016)

添加到收藏夹

Article Chemistry, Applied

Effect of carboxymethylation on rheological and drug release characteristics of locust bean gum matrix tablets

Amrita Chakravorty et al.

CARBOHYDRATE POLYMERS (2016)

添加到收藏夹

Article Chemistry, Applied

Carboxymethylation of Cassia angustifolia seed gum: Synthesis and rheological study

Gaurav Rajput et al.

CARBOHYDRATE POLYMERS (2015)

添加到收藏夹

Article Biochemistry & Molecular Biology

In vitro release of metformin from iron (III) cross-linked alginate-carboxymethyl cellulose hydrogel beads

Bala Yerri Swamy et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2015)

添加到收藏夹

Article Chemistry, Multidisciplinary

Carboxymethyl gum katira: synthesis, characterization and evaluation for nanoparticulate drug delivery

Minkal et al.

RSC ADVANCES (2015)

添加到收藏夹

Article Polymer Science

Synthesis and Characterization of Chemically Cross-Linked Acrylic Acid/Gelatin Hydrogels: Effect of pH and Composition on Swelling and Drug Release

Syed Majid Hanif Bukhari et al.

INTERNATIONAL JOURNAL OF POLYMER SCIENCE (2015)

添加到收藏夹

Article Pharmacology & Pharmacy

Effect of ethylene glycol dimethacrylate on swelling and on metformin hydrochloride release behavior of chemically crosslinked pH-sensitive acrylic acid-polyvinyl alcohol hydrogel

Muhammad Faheem Akhtar et al.

DARU-JOURNAL OF PHARMACEUTICAL SCIENCES (2015)

添加到收藏夹

Article Chemistry, Applied

Effects of amylose content on property and microstructure of starch-graft-sodium acrylate copolymers

Zhi Zhang et al.

CARBOHYDRATE POLYMERS (2014)

添加到收藏夹

Article Chemistry, Applied

Microwave assisted synthesis of acrylamide grafted locust bean gum and its application in drug delivery

Santanu Kaity et al.

CARBOHYDRATE POLYMERS (2013)

添加到收藏夹

Article Engineering, Chemical

Carboxymethylation of Locust Bean Gum: Application in Interpenetrating Polymer Network Microspheres for Controlled Drug Delivery

Santanu Kaity et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2013)

添加到收藏夹

Article Polymer Science

Gastrointestinal delivery of glipizide from carboxymethyl locust bean gumAl3+alginate hydrogel network: In vitro and in vivo performance

Paramita Dey et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2013)

添加到收藏夹

Article Chemistry, Applied

Carboxymethyl gum kondagogu: Synthesis, characterization and evaluation as mucoadhesive polymer

Ashok Kumar et al.

CARBOHYDRATE POLYMERS (2012)

添加到收藏夹

Review Chemistry, Applied

Modified gums: Approaches and applications in drug delivery

Vikas Rana et al.

CARBOHYDRATE POLYMERS (2011)

添加到收藏夹

Article Polymer Science

Microspheres of Carboxymethyl Guar Gum for In Vitro Release of Abacavir Sulfate: Preparation and Characterization

Anita G. Sullad et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2011)

添加到收藏夹

Article Pharmacology & Pharmacy

Tailoring of locust bean gum and development of hydrogel beads for controlled oral delivery of glipizide

Sabyasachi Maiti et al.

DRUG DELIVERY (2010)

添加到收藏夹

Article Chemistry, Applied

Synthesis of partially carboxymethylated guar gum-g-4-vinyl pyridine and study of its water swelling, metal ion sorption and flocculation behaviour

Jasaswini Tripathy et al.

CARBOHYDRATE POLYMERS (2008)

添加到收藏夹

Article Engineering, Manufacturing

Development of porous hydroxyapatite scaffolds

Kunal Pal et al.

MATERIALS AND MANUFACTURING PROCESSES (2006)

添加到收藏夹

Article Mechanics

Large amplitude oscillatory shear as a way to classify the complex fluids

K Hyun et al.

JOURNAL OF NON-NEWTONIAN FLUID MECHANICS (2002)

添加到收藏夹

Article Chemistry, Multidisciplinary

Glutaraldehyde crosslinked sodium alginate beads containing liquid pesticide for soil application

AR Kulkarni et al.

JOURNAL OF CONTROLLED RELEASE (2000)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.