☆ 4.7 Article

A comparative DFT study of CdKF3 and CdKCl3 halide perovskite materials for energy harvesting applications

RESULTS IN PHYSICS (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Materials Science, Multidisciplinary

Structural, mechanical and dynamical stabilities of K2NaMCl6 (M: Cr, Fe) halide perovskites along with electronic and thermal properties

Danish Abdullah et al.

Summary: The properties of K2NaMCl6 (M: Cr, Fe) were simulated using density functional theory. The exchange-correlation potential of halide perovskites was determined using generalized gradient approximation and modified Becke-Johnson potential. The structure's stability was assessed by optimizing total energy and employing the tolerance factor. The results suggest that K2NaMCl6 could be potential candidates for waste heat recovery based on their thermoelectric figure of merit and magnetic moment.

JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2023)

添加到收藏夹

Article Biochemistry & Molecular Biology

Progress in theoretical study of lead-free halide double perovskite Na2AgSbX6 (X = F, Cl, Br, and I) thermoelectric materials

Sunita Kumari et al.

Summary: In this study, we have investigated the properties of novel metal lead-free halide double perovskite materials for renewable energy applications. These materials have attracted significant interest due to their potential use in electronic devices. Our findings indicate that these materials are indirect band gap semiconductors with a range of 1.273 to 3.986 eV. We have also examined optical parameters and found that these materials show potential for use in photovoltaics. Stability issues, thermoelectric parameters, and phonon spectra have also been analyzed, providing further evidence for the usefulness of these materials in thermoelectric devices.

JOURNAL OF MOLECULAR MODELING (2023)

添加到收藏夹

Article Materials Science, Multidisciplinary

First-Principles Calculations to Investigate Effect of X plus Cations Variation on Structural, Mechanical, Electronic and Optical Properties of the XCdCl3 Chloroperovskites

Kamal Hossain et al.

Summary: The structural, elastic, mechanical and optoelectronic properties of XCdCl3 chloroperovskites have been investigated using Density Functional Theory. The computational results are in good agreement with experimental data, confirming the reliability of the study. The chloroperovskites exhibit mechanical stability, ductility, and softness. They also have wide application potential in photovoltaic technology due to their optical conductivity and absorption properties.

MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS (2023)

添加到收藏夹

Article Physics, Multidisciplinary

Alkaline earth based antiperovskite AsPX3 (X = Mg, Ca, and Sr) materials for energy conversion efficient and thermoelectric applications

Upasana Rani et al.

Summary: In this study, the authors investigated the inherent properties of antiperovskite materials, such as bulk modulus, lattice constant, density of states, band gap, effective mass, refractive index, dielectric constant, extinction coefficient, and absorption coefficient, using density functional theory-based first-principles calculations. These materials exhibit high absorption in the Visible, Ultraviolet, and Near Infrared regions, making them promising for optoelectronic devices.

PHYSICA SCRIPTA (2023)

添加到收藏夹

Article Materials Science, Multidisciplinary

Ab-Initio Calculations of Structural, Optoelectronic, Thermoelectric, and Thermodynamic Properties of Mixed-Halide Perovskites RbPbBr3-xIx (x=0 to 3): Applicable in Renewable Energy Devices

Monika Rani et al.

Summary: In this research, the variations in the properties of mixed halide perovskites RbPbBr3-xIx (x = 0 to 3) were investigated using the FP-LAPW approach in the WIEN2k code with GGA-PBE functionals. The orthorhombic halides RbPbBr3-xIx were found to be direct band gap semiconductors with a band gap of 2 to 3 eV, consistent with previous experimental and theoretical results. The thermodynamic results confirmed the thermal stability of these materials. Additionally, RbPbI3 showed higher optical parameters compared to other halide perovskites, suggesting its potential use in photovoltaic applications. The thermoelectric parameters revealed that RbPbIBr2 is the most efficient among the investigated materials.

ECS JOURNAL OF SOLID STATE SCIENCE AND TECHNOLOGY (2023)

添加到收藏夹

Article Physics, Condensed Matter

Computational investigation of inverse perovskite SbPX3 (X = Mg, Ca, and Sr) structured materials with applicability in green energy resources

Upasana Rani et al.

Summary: Antiperovskites with low band gap, strong absorption, and low cost have potential applications in photovoltaics. The proposed materials are found to be highly stable through calculations of structural, elastic, and thermodynamic parameters using the WIEN2k simulation tool. The optoelectronic and thermoelectric characteristics confirm their potential in green energy, with antiperovskite SbPMg3 having a stable yet efficient power conversion efficiency of 15.8% and the ability to be used in thermoelectric generators due to its high figure of merit.

COMPUTATIONAL CONDENSED MATTER (2023)

添加到收藏夹

Article Chemistry, Multidisciplinary

Pressure-Induced Band Gap Engineering of Nontoxic Lead-Free Halide Perovskite CsMgI3 for Optoelectronic Applications

Mithun Khan et al.

Summary: Recently, the attention on lead halide perovskites has increased due to their physicochemical features and possible applications, but their instability and toxicity hinder commercialization. This study investigates the properties of non-toxic perovskite CsMgI(3) under hydrostatic pressure. The results show that pressure enhances the material's characteristics, such as shorter and stronger bonds and increased absorption coefficient. It also suggests that CsMgI3 under pressure may be used more frequently in solar cells and optoelectronic devices. This study highlights the potential of hydrostatic pressure in modifying the optoelectronic and mechanical properties of lead-free perovskites.

ACS OMEGA (2023)

添加到收藏夹

Article Multidisciplinary Sciences

Highly efficient and stable lead-free cesium copper halide perovskites for optoelectronic applications: A DFT based study

Md Lokman Ali et al.

Summary: This study investigates the Cs3Cu2X5 (X = Cl,Br,I) perovskites using density functional theory (DFT) and explores their structural, optical, thermodynamic, elastic, mechanical, and electronic properties. The results show that these perovskites are direct band gap semiconductors, with Cs3Cu2Br5 having the smallest band gap. The analysis of elastic constants confirms the mechanical and dynamic stability of each phase.

HELIYON (2023)

添加到收藏夹

Article Chemistry, Multidisciplinary

A DFT study of the stability and optoelectronic properties of all-inorganic lead-free halide perovskites

Diwen Liu et al.

Summary: The study found that CsGeX3 and Cs2GeCl6 are stable at room temperature, while Cs2GeBr6 and Cs2GeI6 are unstable. A phase transition occurs in CsGe1-xSnxI3 systems when the Sn doping ratio is over 0.53, and CsGe2/3Sn1/3I3 and CsGe0.25Sn0.75I3 show a potential tendency for phase segregation, making them promising candidates for solar cells. Overall, the novel lead-free mixed Ge-Sn perovskites demonstrate favorable optoelectronic properties for single-junction solar cells.

JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS (2022)

添加到收藏夹

Article Physics, Condensed Matter

A DFT study of electronic, optical and thermoelectric properties of Ge-halide perovskites CsGeX3 (X=F, Cl and Br)

Soukaina Bouhmaidi et al.

Summary: In this study, the properties of Ge-based halide perovskites were investigated using DFT and semiclassical Boltzmann transport theory. The CsGeBr3 system showed the highest Seebeck coefficient and electronic figure of merit at low temperatures, making it suitable for thermoelectric applications.

COMPUTATIONAL CONDENSED MATTER (2022)

添加到收藏夹

Article Energy & Fuels

Enhancement of thermoelectric power factor of zinc oxide by nickel and indium dual doping

Chambakkoottathil Soumya et al.

Summary: The effect of dual substitution of indium and nickel on the structural and morphological deformation of zinc oxide and its enhancement of thermoelectric properties were investigated. The doped materials showed a similar hexagonal wurtzite structure to the host material, with increased crystallite size and strain due to the inclusion of cations with larger radius. The optical band gap energy decreased, leading to higher charge carrier density and improved transport properties. The doped samples exhibited highest electrical conductivity and seebeck coefficient, resulting in an increased power factor, while the thermal conductivity decreased. The highest figure of merit obtained was 0.11.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2022)

添加到收藏夹

Review Chemistry, Physical

Research progress of ABX3-type lead-free perovskites for optoelectronic applications: materials and devices

Hao Wang et al.

Summary: This article summarizes the development and application of lead-free halide perovskite materials, including their crystal structure, energy band structure, and optoelectronic properties. These materials have great potential for applications in solar cells and light-emitting devices, but their stability and photoelectric conversion efficiency still face challenges.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Role of metal and anions in organo-metal halide perovskites CH3NH3MX3 (M: Cu, Zn, Ga, Ge, Sn, Pb; X: Cl, Br, I) on structural and optoelectronic properties for photovoltaic applications

Maliha Nishat et al.

Summary: This study investigates the effects of metal cation and halogen anion on the structural, electronic, and optical properties of organic metal halide perovskites for solar cell applications. The results show that different metal cations and halogen anions have an impact on these properties. Some compounds exhibit a wide range of light absorption and possess high dielectric constants and refractive indices, suggesting potential applications.

RSC ADVANCES (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

RbSnX3 (X = Cl, Br, I): promising lead-free metal halide perovskites for photovoltaics and optoelectronics

Md Habibur Rahman et al.

Summary: This study evaluates the structural, mechanical, electronic, and optical properties of lead-free RbSnX3 perovskites using ab initio density functional theory calculations. The results show that RbSnX3 perovskites are mechanically stable, highly ductile, and suitable for optoelectronic devices. They also exhibit excellent light absorption and optical conductivity, making them promising for photovoltaic and optoelectronic applications. RbSnI3, in particular, shows superior ductility and absorption at the ultraviolet region, suggesting its potential in next-generation ultraviolet photodetectors.

RSC ADVANCES (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Significantly Enhanced Energy Storage Density of NNT Ceramics Using Aliovalent Dy3+ Dopant

Marwa Emmanuel et al.

Summary: The addition of Dy3+ to DNNT ceramic materials broadens the phase transition peak, enhancing the relaxor properties and achieving improved energy storage capability.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Structure and spectroscopic ellipsometry studies of nanocrystalline Dy2O3 thin films deposited on Al2O3 wafers by electron beam evaporation technique

Faisal Alresheedi

Summary: The study investigates the effect of film thickness on the optical properties of dysprosium oxide films on sapphire substrates. It was found that the crystallite size and f-f transitions of Dy3+ increase with film thickness. Spectroscopic ellipsometry and UV-Vis spectrophotometry were used to analyze the optical properties of the films.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Ternary halide perovskites for possible optoelectronic applications revealed by Artificial Intelligence and DFT calculations

J. Gomez-Peralta et al.

Summary: In this article, 134 AMX3 compounds were identified as potential candidates for adopting the perovskite structure. Through the use of an Artificial Neural Network (ANN) and DFT calculations, it was found that 96 of these compounds exhibited stability and could potentially be applied in solar cells or transparent semiconductors.

MATERIALS CHEMISTRY AND PHYSICS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Density Functional Study of Cubic, Tetragonal, and Orthorhombic CsPbBr3 Perovskite

Hamid M. Ghaithan et al.

ACS OMEGA (2020)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

qvasp: A flexible toolkit for VASP users in materials simulations

Wencai Yi et al.

COMPUTER PHYSICS COMMUNICATIONS (2020)

添加到收藏夹

Article Chemistry, Physical

First-principles calculations of mechanical, electronic and optical properties of a new imidooxonitridophosphate

M. Debbichi et al.

CHEMICAL PHYSICS (2020)

添加到收藏夹

Review Materials Science, Multidisciplinary

Perovskite CsPbBr3 crystals: growth and applications

Jiaoxian Yu et al.

JOURNAL OF MATERIALS CHEMISTRY C (2020)

添加到收藏夹

Article Engineering, Electrical & Electronic

First-Principles Investigation of Structural, Electronic, Optical, and Magnetic Properties of Ternary Mixed Compound CsTexS1-x

A. K. Kushwaha et al.

JOURNAL OF ELECTRONIC MATERIALS (2019)

添加到收藏夹

Review Chemistry, Multidisciplinary

Review on Recent Progress of All-Inorganic Metal Halide Perovskites and Solar Cells

Wanchun Xiang et al.

ADVANCED MATERIALS (2019)

添加到收藏夹

Article Chemistry, Physical

Theoretical prediction of optoelectronic and thermoelectric properties of RbXO2 (X = Al, Ga, In) for renewable energy applications

Q. Mahmood et al.

CHEMICAL PHYSICS LETTERS (2019)

添加到收藏夹

Article Physics, Fluids & Plasmas

Ab-initio simulations of MgTiO3 oxide at different pressure

Sadia Nazir et al.

HIGH ENERGY DENSITY PHYSICS (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Systematic study of the elastic, optoelectronic, and thermoelectric behavior of MRh2O4 (M = Zn, Cd) based on first principles calculations

Syed Adeel Abbas et al.

JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

First-principles study on the material properties of the inorganic perovskite Rb1-xCsxPbI3 for solar cell applications

Un-Gi Jong et al.

PHYSICAL REVIEW B (2018)

添加到收藏夹

Article Chemistry, Physical

Structural, electronic and optical properties of CsPbX3 (X = Cl, Br, I) for energy storage and hybrid solar cell applications

Murad Ahmad et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2017)

添加到收藏夹

Review Chemistry, Multidisciplinary

All Inorganic Halide Perovskites Nanosystem: Synthesis, Structural Features, Optical Properties and Optoelectronic Applications

Xiaoming Li et al.

SMALL (2017)

添加到收藏夹

Article Multidisciplinary Sciences

Ultra-bright and highly efficient inorganic based perovskite light-emitting diodes

Liuqi Zhang et al.

NATURE COMMUNICATIONS (2017)

添加到收藏夹

Article Chemistry, Physical

Cs1-xRbxPbCl3 and Cs1-xRbxPbBr3 Solid Solutions: Understanding Octahedral Tilting in Lead Halide Perovskites

Matthew R. Linaburg et al.

CHEMISTRY OF MATERIALS (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

High-Efficiency Light-Emitting Diodes of Organometal Halide Perovskite Amorphous Nanoparticles

Jun Xing et al.

ACS NANO (2016)

添加到收藏夹

Review Chemistry, Multidisciplinary

Perovskite Materials for Light-Emitting Diodes and Lasers

Sjoerd A. Veldhuis et al.

ADVANCED MATERIALS (2016)

添加到收藏夹

Article Chemistry, Multidisciplinary

Recent progress in the synthesis of hybrid halide perovskite single crystals

Yangyang Dang et al.

CRYSTENGCOMM (2016)

添加到收藏夹

Article Chemistry, Physical

First-Principles Study of the Thermoelectric Properties of SrRuO3

Naihua Miao et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2016)

添加到收藏夹

Article Chemistry, Multidisciplinary

Quantum Dot Light-Emitting Diodes Based on Inorganic Perovskite Cesium Lead Halides (CsPbX3)

Jizhong Song et al.

ADVANCED MATERIALS (2015)

添加到收藏夹

Article Chemistry, Physical

Theoretical studies of the pressure-induced phase transition and elastic properties of BeS

Xu Ji et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2015)

添加到收藏夹

Article Nanoscience & Nanotechnology

First principles phonon calculations in materials science

Atsushi Togo et al.

SCRIPTA MATERIALIA (2015)

添加到收藏夹

Article Materials Science, Coatings & Films

A first-principles study of structure, elasticity and thermal decomposition of Ti1 - xTMxN alloys (TM = Y, Zr, Nb, Hf, and Ta)

Pengfei Ou et al.

SURFACE & COATINGS TECHNOLOGY (2015)

添加到收藏夹

Review Optics

The emergence of perovskite solar cells

Martin A. Green et al.

NATURE PHOTONICS (2014)

添加到收藏夹

Article Physics, Multidisciplinary

First-principles study on the electronic and optical properties of cubic ABX3 halide perovskites

Li Lang et al.

PHYSICS LETTERS A (2014)

添加到收藏夹

Article Nanoscience & Nanotechnology

Bandgap calculations and trends of organometal halide perovskites

Ivano E. Castelli et al.

APL MATERIALS (2014)

添加到收藏夹

Article Physics, Condensed Matter

First principle study of the structural and optoelectronic properties of cubic perovskites CsPbM3 (M=Cl, Br, I)

G. Murtaza et al.

PHYSICA B-CONDENSED MATTER (2011)

添加到收藏夹

Article Materials Science, Multidisciplinary

Implementation of screened hybrid functionals based on the Yukawa potential within the LAPW basis set

Fabien Tran et al.

PHYSICAL REVIEW B (2011)

添加到收藏夹

Correction Materials Science, Multidisciplinary

Tests of a ladder of density functionals for bulk solids and surfaces (vol 69, art no 075102, 2004)

Viktor N. Staroverov et al.

PHYSICAL REVIEW B (2008)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

BoltzTraP. A code for calculating band-structure dependent quantities

Georg K. H. Madsen et al.

COMPUTER PHYSICS COMMUNICATIONS (2006)

添加到收藏夹

Article Chemistry, Physical

Properties of strained zinc-blende GaN: first-principles study

MB Kanoun et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2004)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.