☆ 4.5 Article

Clarification of the dispersion mechanism of cathode slurry of lithium-ion battery under effects of both poly vinylidene fluoride/ carbon black ratio and mixing time

PARTICUOLOGY (2024)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Chemical

Si-induced insertion of Li into SiC to form Li-rich SiC twin crystal

Di Zhang et al.

Summary: The study reveals the significance of new cathode materials with high capacity and voltage for Li-ion batteries. The Li-rich SiC twin crystal demonstrates promising characteristics as a potential cathode material for high-capacity Li-ion batteries.

PARTICUOLOGY (2023)

添加到收藏夹

Article Engineering, Chemical

Clarification of the dispersion mechanism of three typical chemical dispersants in lithium-ion battery (LIB) slurry

Zhilong Wang et al.

Summary: This paper mainly clarifies the dispersion mechanism of three typical chemical dispersants, including polyethylene glycol octylphenyl ether (Triton X-100, T-100), polyethylene pyrrolidone (PVP), and carboxymethyl cellulose (CMC), in lithium-ion battery (LIB) slurry. The optimal amounts of T-100, PVP, and CMC are selected based on the evaluation of the impedance of LIB slurry with different dispersant concentrations. The dispersion mechanism of each dispersant is verified using SEM and C element distribution images of LIB slurry, leading to the conclusion that CMC with an optimal amount of 1.5% is the most effective in promoting the formation of conductive paths and CB-coated LiCoO2 network structure in LIB slurry, thus having potential to improve the performance of LIB.

PARTICUOLOGY (2023)

添加到收藏夹

Article Engineering, Chemical

Higher-order polysulfides induced thermal runaway for 1.0 Ah lithium sulfur pouch cells

Feng-Ni Jiang et al.

Summary: Comprehensive analyses of thermal runaway mechanisms are crucial for the safe operation of lithium-sulfur (Li-S) batteries. The thermal runaway of 1.0 Ah cycled Li-S pouch cells is attributed to the reactions between dissolved higher-order polysulfides and Li metal. Adding electrolyte significantly affects the thermal safety, with the 16-cycle pouch cell experiencing severe thermal runaway while the 45-cycle pouch cell remains stable. The presence of high-order polysulfides (Li2Sx > 6) and exothermic reactions with cycled Li contribute to the thermal runaway of Li-S pouch cells.

PARTICUOLOGY (2023)

添加到收藏夹

Article Engineering, Chemical

Lithium-storage properties of SiO2 nanotubes@C using carbon nanotubes as templates

Zixu Shi et al.

Summary: In this article, silica nanotubes were prepared using carbon nanotubes as a template, and then coated with a uniform carbon layer to enhance conductivity and electrochemical performance. The hollow structure of the nanotubes provides more insertion sites and migration channels for lithium ions, improving electrochemical performance. The composite material has a specific capacity of about 650 mAh g-1 at 0.1 A g-1 after 100 cycles, and about 400 mAh g-1 at 1 A g-1 after 100 cycles. Silica-based material is a competitive anode material for lithium-ion batteries.

PARTICUOLOGY (2023)

添加到收藏夹

Article Engineering, Chemical

Particulate modification of lithium-ion battery anode materials and electrolytes

Zhiwei Li et al.

Summary: Lithium-ion batteries (LIBs) are rechargeable energy storage devices used in electronic equipment. However, their electrochemical properties need improvement and issues such as volume expansion, Li dendrite growth and unsatisfied solid electrolyte interphase hamper their development. Particulate modification methods have been proposed to enhance the performance of LIBs.

PARTICUOLOGY (2023)

添加到收藏夹

Article Chemistry, Physical

Understanding slurry mixing effects on the fast charging capability of lithium-ion battery cells: Methodology and case study

Korbinian Huber et al.

Summary: The slurry preparation of graphite anodes has an important influence on their performance and fast charging capability. This study introduces a method that investigates the impact of slurry preparation on electrode properties and fast charging performance using an in-situ lithium plating detection technique. The results show that high intensity mixing leads to an increased electrode tortuosity, which in turn deteriorates the fast charging performance.

JOURNAL OF POWER SOURCES (2022)

添加到收藏夹

Article Engineering, Chemical

In situ 4D distribution visualization of carbon-black volume fraction in cathode slurry of lithium-ion battery by multi-layered electrical resistance tomography (mlERT)

Natsuki Ikeno et al.

Summary: This study visualized the in situ 4D distribution of carbon black (CB) volume fraction in the cathode slurry of a lithium-ion battery using multi-layered electrical resistance tomography (mlERT). The distribution of CB in different dispersion states was observed under different mixing times and speeds. The results showed that mlERT has high accuracy in visualizing the distribution of CB in the cathode slurry and can provide valuable information about its behavior.

ADVANCED POWDER TECHNOLOGY (2022)

添加到收藏夹

Article Electrochemistry

Relation between Mixing Processes and Properties of Lithium-ion Battery Electrode-slurry

Mitsuhiro Takeno et al.

Summary: This study investigated the relationship between the mixing process of electrode-slurry and the internal resistance of composite electrodes using rheological analysis and AC impedance spectroscopy. The results showed that the mixing process and AB content affect the formation of the AB network, influencing the performance of the composite electrodes.

ELECTROCHEMISTRY (2021)

添加到收藏夹

Article Automation & Control Systems

Evaluation of particle dispersion behaviours in Lithium-ion battery slurry by electrical impedance spectra-tomography method

Zhilong Wang et al.

TRANSACTIONS OF THE INSTITUTE OF MEASUREMENT AND CONTROL (2020)

添加到收藏夹

Article Chemistry, Physical

Comprehensive effort on electrode slurry preparation for better electrochemical performance of LiFePO4

Kumari Konda et al.

JOURNAL OF POWER SOURCES (2020)

添加到收藏夹

Article Electrochemistry

Effects of the Mixing Sequence on Making Lithium Ion Battery Electrodes

Ming Wang et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2020)

添加到收藏夹

Article Electrochemistry

Influence of Conductive Additives and Binder on the Impedance of Lithium-Ion Battery Electrodes: Effect of Morphology

Simon Hein et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2020)

添加到收藏夹

Article Chemistry, Applied

Choice for graphene as conductive additive for cathode of lithium-ion batteries

Ying Shi et al.

JOURNAL OF ENERGY CHEMISTRY (2019)

添加到收藏夹

Article Electrochemistry

Clarification of Particle Dispersion Behaviors Based on the Dielectric Characteristics of Cathode Slurry in Lithium-Ion Battery (LIB)

Zhilong Wang et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2019)

添加到收藏夹

Article Electrochemistry

Evaluation of the Electrochemical Characterizations of Lithium-Ion Battery (LIB) Slurry with 10-Parameter Electrical Equivalent Circuit (EEC)

Zhilong Wang et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2017)

添加到收藏夹

Article Electrochemistry

Morphological Structure Characterizations in Lithium-Ion Battery (LIB) Slurry under Shear Rotational Conditions by On-Line Dynamic Electrochemical Impedance Spectroscopy ( EIS) Method

Zhilong Wang et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2017)

添加到收藏夹

Article Electrochemistry

Optimization of Inactive Material Content in Lithium Iron Phosphate Electrodes for High Power Applications

Seonbaek Ha et al.

ELECTROCHIMICA ACTA (2016)

添加到收藏夹

Article Engineering, Electrical & Electronic

Agitation Effect on the Rheological Behavior of Lithium-Ion Battery Slurries

Young Il Kwon et al.

JOURNAL OF ELECTRONIC MATERIALS (2015)

添加到收藏夹

Article Materials Science, Ceramics

Rheological properties and stability of NMP based cathode slurries for lithium ion batteries

Werner Bauer et al.

CERAMICS INTERNATIONAL (2014)

添加到收藏夹

Article Chemistry, Physical

Ni@Pt core-shell nanoparticles with enhanced catalytic activity for oxygen reduction reaction

Guoxiu Wang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2010)

添加到收藏夹

Article Chemistry, Physical

Effect of slurry preparation process on electrochemical performances of LiCoO2 composite electrode

Gil-Won Lee et al.

JOURNAL OF POWER SOURCES (2010)

添加到收藏夹

Article Chemistry, Physical

On the applicability of DLVO theory to the prediction of clay colloids stability

T Missana et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2000)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.