☆ 4.7 Article

Effect of delamination on the dynamic characteristics of thin-walled carbon fiber-reinforced polymer tube

POLYMER COMPOSITES (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Mechanics

The effect of delamination in free vibration responses of adhesively bonded spar wingskin joints

P. K. Mishra et al.

Summary: This article investigates the effects of delamination on the structural vibration characteristics of spar wingskin joints made with curved laminated composites. Three-dimensional finite element analysis is used to evaluate the natural frequencies and mode shapes of the joint structure, and various parameters are analyzed to understand their effects on the free vibration responses. The results of this study can provide guidelines for designing curved laminated composite joint structures.

MECHANICS BASED DESIGN OF STRUCTURES AND MACHINES (2023)

添加到收藏夹

Article Materials Science, Composites

Study on structural optimization of braid-and-lay integrated carbon fiber reinforced polymer for metro bogie

Qihua Ma et al.

Summary: This article proposes a novel three-dimensional braided and prepreg-layered (braid-and-lay) composite forming process for replacing metal materials and achieving lightweight. The performance advantages of braid-and-lay composites were verified through experimental methods, and a structural optimization design was carried out based on predicted elastic parameters. The results show a 15.33% reduction in structure mass while ensuring displacement and stress responses within the constraint range.

POLYMER COMPOSITES (2023)

添加到收藏夹

Article Engineering, Mechanical

An improved partial similitude method for dynamic characteristic of rotor systems based on Levenberg-Marquardt method

Lei Li et al.

Summary: Similitude theory is widely used in predicting the structural responses of full-size prototypes through scaled models. Partial similitude, more flexible in practical design, needs improvement in accuracy. An improved partial similitude approach is presented in this study to establish scaling laws for rotor systems and to overcome the insufficient accuracy of existing methods in predicting dynamic characteristics. The accuracy and effectiveness of this approach are validated through numerical and experimental case studies, showing higher accuracy than existing methods.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2022)

添加到收藏夹

Review Engineering, Civil

Lightweight hybrid materials and structures for energy absorption: A state-of-the-art review and outlook

Guangyong Sun et al.

Summary: This article provides a critical review on the advances in hybrid materials and structures for crashworthiness and energy absorption performance. It discusses the hybridization of different materials to maximize their functional roles in lightweight structures. The evaluation and comparison of various hybridized materials in terms of crashworthiness and energy absorption are also discussed.

THIN-WALLED STRUCTURES (2022)

添加到收藏夹

Review Engineering, Multidisciplinary

Recent Advances in Space-Deployable Structures in China

Xiaofei Ma et al.

Summary: This paper summarizes the current research status and development trend of space-deployable structures in China, including large space mesh antennas, space solar arrays, and deployable structures and mechanisms for deep-space exploration. Critical technologies of space-deployable structures are addressed and future technology developments and trends are elucidated in the fields of mesh antennas, solar arrays, deployable mechanisms, and on-orbit adjustment, assembly, and construction.

ENGINEERING (2022)

添加到收藏夹

Article Materials Science, Composites

Simultaneously improve the mode II interlaminar fracture toughness, flexural properties, and impact strength of CFRP composites with short aramid fiber interlaminar toughening

Yongan Wang et al.

Summary: This work focuses on the mode II interlaminar fracture behavior of carbon fiber composites toughened by short aramid fiber modified epoxy resin. The addition of short fibers increases the mode II interlaminar fracture toughness, with the best toughening effect observed at a fiber content of 10 g/m(2). The toughening mechanism was observed through SEM images of the fracture surface, and improved flexural properties and impact strength were achieved using this method, demonstrating its effectiveness as an interlaminar toughening method.

POLYMER COMPOSITES (2022)

添加到收藏夹

Review Materials Science, Composites

A state-of-the-art review on potential applications of natural fiber-reinforced polymer composite filled with inorganic nanoparticle

Trilokinath Mishra et al.

Summary: This review discusses the mechanical, flame retardant, thermal, tribological, water absorption, and biodegradable properties of inorganic nanoparticle-filled natural reinforced polymer composites and their applications. Research has shown that the incorporation of inorganic nanoparticles improves the mechanical and tribological properties of the composites, enhances thermal stability and flame retardancy, and reduces water absorption. These biocomposites have higher degradability, cause less environmental pollution, and find utility in various industries and fields.

COMPOSITES PART C: OPEN ACCESS (2022)

添加到收藏夹

Article Engineering, Multidisciplinary

Vibration analysis of fluid-conveying multi-scale hybrid nanocomposite shells with respect to agglomeration of nanofillers

Farzad Ebrahimi et al.

Summary: The vibration problem of a fluid conveying cylindrical shell made of newly developed multi-scale hybrid nanocomposites is solved analytically, considering the agglomeration effect of nanofillers and the influence of viscous flow. The governing equations are solved using Galerkin's method to determine the natural frequency of the structure under different boundary conditions, with the effects of each parameter shown graphically.

DEFENCE TECHNOLOGY (2021)

添加到收藏夹

Article Engineering, Mechanical

Partial similitude for dynamic characteristics of rotor systems considering gravitational acceleration

Zhong Luo et al.

Summary: This paper proposes a scaling method for rotor models that considers gravitational acceleration, which differs from previous studies and can reduce the difficulty and costs of model testing. The results show that neglecting gravitational acceleration can lead to errors in predicting vibration responses.

MECHANISM AND MACHINE THEORY (2021)

添加到收藏夹

Article Materials Science, Composites

Effects of different interface conditions on energy absorption characteristics of Al/carbon fiber reinforced polymer hybrid structures for multiple loading conditions

Qi-hua Ma et al.

Summary: The treatment of CFRP-metal bond interface is crucial for the practical application of CFRP-reinforced metal structures in automobile, aviation, and other transportation vehicles. Different interface connection conditions have varied effects on the failure mode and energy absorption of hybrid tubes, showing improvement in energy absorption characteristics under axial crushing and transverse bending loads through sandblasting and cementing, while having little impact on crashworthiness under radial pressure.

POLYMER COMPOSITES (2021)

添加到收藏夹

Article Crystallography

Comparison of Mode Shapes of Carbon-Fiber-Reinforced Plastic Material Considering Carbon Fiber Direction

Chan-Jung Kim

Summary: The study compared the dynamic behavior of CFRP specimens with different carbon fiber directions using experimental modal analysis and the modal assurance criterion, finding increased similarity among specimens when the carbon fiber direction exceeded 45 degrees. Anisotropic nature was dominant in three cases from 0 degrees to 45 degrees, with the most sensitive case identified in Specimen #3.

CRYSTALS (2021)

添加到收藏夹

Article Chemistry, Physical

Free Vibration Analysis of Closed Moderately Thick Cross-Ply Composite Laminated Cylindrical Shell with Arbitrary Boundary Conditions

Dongyan Shi et al.

MATERIALS (2020)

添加到收藏夹

Article Materials Science, Composites

Effect of clay nanoparticles on the mechanical and vibration characteristics of intraply aramid/carbon fiber reinforced epoxy composite

Mohamad Alsaadi et al.

POLYMER COMPOSITES (2020)

添加到收藏夹

Article Automation & Control Systems

Characterization test on nonlinear vibration of the fibre-reinforced composite thin plate

Hui Li et al.

MEASUREMENT & CONTROL (2020)

添加到收藏夹

Article Chemistry, Physical

Sensitivity Analysis of the Frequency Response Function of Carbon-Fiber-Reinforced Plastic Specimens for Different Direction of Carbon Fiber as Well as Spectral Loading Pattern

Chan-Jung Kim

MATERIALS (2019)

添加到收藏夹

Article Mechanics

Nonlinear radial breathing vibrations of CFRP laminated cylindrical shell with non-normal boundary conditions subjected to axial pressure and radial line load at two ends

W. Zhang et al.

COMPOSITE STRUCTURES (2018)

添加到收藏夹

Article Polymer Science

Effect of Load on the Thermal Expansion Behavior of T700 Carbon Fiber Bundles

Guoliang Geng et al.

POLYMERS (2018)

添加到收藏夹

Article Mechanics

The Walsh series method for free vibration analysis of functionally graded cylindrical shells

Jianyu Fan et al.

COMPOSITE STRUCTURES (2018)

添加到收藏夹

Article Engineering, Aerospace

Investigations on the aerothermoelastic properties of composite laminated cylindrical shells with elastic boundaries in supersonic airflow based on the Rayleigh-Ritz method

Yuyang Chai et al.

AEROSPACE SCIENCE AND TECHNOLOGY (2018)

添加到收藏夹

Article Engineering, Aerospace

Deployment analysis and optimization of a flexible deployable structure for large synthetic aperture radar antennas

Yan Wang et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART G-JOURNAL OF AEROSPACE ENGINEERING (2016)

添加到收藏夹

Article Mechanics

Vibration characteristics of generally laminated composite curved beams with single through-the-width delamination

Ramazan-Ali Jafari-Talookolaei et al.

COMPOSITE STRUCTURES (2016)

添加到收藏夹

Article Mechanics

Free vibrations of laminated composite shells using the rotation-free plate elements based on Reddy's layerwise discontinuous displacement model

Miroslav Marjanovic et al.

COMPOSITE STRUCTURES (2016)

添加到收藏夹

Article Mechanics

Geometrically nonlinear transient analysis of delaminated composite and sandwich plates using a layerwise displacement model with contact conditions

Miroslav Marjanovic et al.

COMPOSITE STRUCTURES (2015)

添加到收藏夹

Article Acoustics

Dynamic buckling analysis of delaminated composite plates using semi-analytical finite strip method

H. R. Ovesy et al.

JOURNAL OF SOUND AND VIBRATION (2015)

添加到收藏夹

Article Materials Science, Composites

Dynamic analysis of generally laminated composite beam with a delamination based on a higher-order shear deformable theory

Ramazan-Ali Jafari-Talookolaei et al.

JOURNAL OF COMPOSITE MATERIALS (2015)

添加到收藏夹

Article Mechanics

Layerwise solution of free vibrations and buckling of laminated composite and sandwich plates with embedded delaminations

Miroslav Marjanovic et al.

COMPOSITE STRUCTURES (2014)

添加到收藏夹

Article Mechanics

A general Fourier solution for the vibration analysis of composite laminated structure elements of revolution with general elastic restraints

Guoyong Jin et al.

COMPOSITE STRUCTURES (2014)

添加到收藏夹

Article Mechanics

Impact and post impact (CAI) behavior of stitched woven-knit hybrid composites

Alaattin Aktas et al.

COMPOSITE STRUCTURES (2014)

添加到收藏夹

Article Engineering, Multidisciplinary

Free vibration analysis of exponential functionally graded beams with a single delamination

Y. Liu et al.

COMPOSITES PART B-ENGINEERING (2014)

添加到收藏夹

Article Engineering, Multidisciplinary

A refined dynamic stiffness element for free vibration analysis of cross-ply laminated composite cylindrical and spherical shallow shells

Fiorenzo A. Fazzolari

COMPOSITES PART B-ENGINEERING (2014)

添加到收藏夹

Article Mechanics

An exact solution for the free vibration analysis of laminated composite cylindrical shells with general elastic boundary conditions

Guoyong Jin et al.

COMPOSITE STRUCTURES (2013)

添加到收藏夹

Article Engineering, Mechanical

A unified approach for the vibration analysis of moderately thick composite laminated cylindrical shells with arbitrary boundary conditions

Guoyong Jin et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2013)

添加到收藏夹

Article Mechanics

Finite element modeling of composite plates with internal delamination

K. Alnefaie

COMPOSITE STRUCTURES (2009)

添加到收藏夹

Article Mechanics

Bending, free vibrations and buckling of laminated composite and sandwich plates using a layerwise displacement model

M. Cetkovic et al.

COMPOSITE STRUCTURES (2009)

添加到收藏夹

Article Acoustics

Geometrically nonlinear transient analysis of laminated composite shells using the finite element method

Namita Nanda et al.

JOURNAL OF SOUND AND VIBRATION (2009)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.