☆ 4.7 Article

Insights into the design of polymetallic ore flotation circuits, including tailing desulfurization

MINERALS ENGINEERING (2024)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Chemical

Utilization of soluble starch as the depressant to flotation separation of pyrite from arsenopyrite

Jincheng Ran et al.

Summary: In this study, a macromolecular organic depressant soluble starch (SS) was introduced and its application and depression mechanism in the selective flotation separation of arsenopyrite and pyrite were investigated. Even a low concentration of SS can be stably adsorbed on the surface of pyrite through chemical adsorption and hydrogen bonding, and its poor flotation performance was determined by the formation of hydrophilic Fe-hydroxylated species. The arsenic-rich surface formed by arsenopyrite oxidation provided rich sites for the adsorption of the -OH group of SS, so as to protect the Fe sites from being shielded by metal-hydroxylated species. Given its low dosage and environment-friendly characteristics, SS is a promising flotation depressant with remarkable application prospects to remove arsenopyrite from pyrite concentrate.

SEPARATION AND PURIFICATION TECHNOLOGY (2023)

添加到收藏夹

Article Engineering, Chemical

Investigations of amino trimethylene phosphonic acid as a green and efficient depressant for the flotation separation of apatite from calcite

Cheng Liu et al.

Summary: This research introduces amino trimethylene phosphonic acid (ATMP) to separate apatite and calcite. Flotation results confirm that ATMP has a strong depression ability to calcite, while it hardly influences the apatite floatability.

MINERALS ENGINEERING (2022)

添加到收藏夹

Article Geochemistry & Geophysics

A Comprehensive Recovery Process for Selective Separation and Enrichment of Copper, Zinc and Iron Minerals from a Polymetallic Ore and the Adsorption Mechanism of Collector Z-200

Bin Xu et al.

Summary: A comprehensive recovery process for selective separation and enrichment of copper, zinc, and iron minerals from a polymetallic ore was developed and showed promising industrial application prospects. The adsorption mechanism of the copper collector Z-200 on the surfaces of chalcopyrite, sphalerite, and magnetite was also investigated, demonstrating that Z-200 chemically adsorbed on the chalcopyrite surface through normal and back donation covalent bonds. This chemisorption was supported by the FTIR spectrum analysis result.

MINERALS (2022)

添加到收藏夹

Article Chemistry, Physical

Alternative flotation collectors for the environmental desulfurization of gersdorffite (NiAsS) bearing mine tailings: Surface chemistry

A. El-bouazzaoui et al.

Summary: This paper investigates the flotation challenges of gersdorffite in environmental desulfurization and provides a better understanding of its surface chemistry and collector adsorption behavior. The results of this study are important for understanding the flotation behavior of gersdorffite.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2022)

添加到收藏夹

Article Engineering, Chemical

A novel sulfur-containing ionic liquid collector for the reverse flotation separation of pyrrhotite from magnetite

Qinzhi Yuan et al.

Summary: A novel sulfur-containing ionic liquid (SCIL) collector was synthesized and used for the selective separation of pyrrhotite from magnetite. The results showed that SCIL exhibited excellent collecting ability and selectivity, reducing the impurity content effectively. The adsorption mechanism analysis revealed that SCIL could chemisorb onto the pyrrhotite surface.

SEPARATION AND PURIFICATION TECHNOLOGY (2022)

添加到收藏夹

Article Engineering, Electrical & Electronic

Online Superficial Gas Velocity, Holdup, and Froth Depth Sensor for Flotation Cells

Claudio Leiva et al.

Summary: In the flotation process, controlling froth depth and gas flow rate is crucial for improving efficiency and selectivity, but accurate measurement of these parameters is difficult. To address this issue, an intelligent online gas dispersion sensor based on two concentric cylinders has been proposed to improve the accuracy of gas velocity calculation and reduce the errors in froth depth measurement using pressure transducers.

JOURNAL OF SENSORS (2022)

添加到收藏夹

Article Engineering, Chemical

Limiting conditions in large flotation cells: Froth recovery and bubble loading

J. Yianatos et al.

Summary: In this paper, the metallurgical performance of flotation cells was evaluated based on the cell volume and operating variables. The results showed that increasing the cell volume leads to a higher bubble loading, and the use of internal launders expands the range of operating conditions.

MINERALS ENGINEERING (2022)

添加到收藏夹

Article Chemistry, Physical

Physical-chemical study of IPETC and PAX collector's adsorption on covellite surface

Yesica L. Botero et al.

Summary: The adsorption mechanisms of the collectors IPETC and PAX on a covellite surface were studied through microflotation tests, FT-IR, XPS, and DFT calculations. The results showed that both collectors have a significant impact on covellite flotation and that the flotation is not pH-dependent.

APPLIED SURFACE SCIENCE (2022)

添加到收藏夹

Article Engineering, Chemical

Environmental desulfurization of mine tailings using froth flotation: The case of Amaruq Mine (Nunavut, Canada)

Abdelilah El-bouazzaoui et al.

Summary: This research focused on the desulfurization of tailings from the Amaruq mine using froth flotation. The study optimized the flotation process by testing different collectors and assessed the efficiency and environmental impact of the desulfurization process. The results showed that the process successfully reduced the sulfur content in the tailings and prevented contaminated mine drainage generation.

MINERALS ENGINEERING (2022)

添加到收藏夹

Review Chemistry, Physical

Froth Flotation of Chalcopyrite/Pyrite Ore: A Critical Review

Cesar Castellon et al.

Summary: This study focuses on the microscopic fundamentals of flotation operations of chalcopyrite, addressing the challenging impact of pyrite on reducing concentrate quality. It also discusses the main chemical and physical mechanisms involved in reagent adsorption and the potential of modern collector reagents for better copper recovery and environmental sustainability.

MATERIALS (2022)

添加到收藏夹

Article Energy & Fuels

Circular Economy Models in Industry: Developing a Conceptual Framework

Oksana Marinina et al.

Summary: This article studies the application of circular business models in the mining and mineral processing industry and develops a conceptual framework for Russian coal companies to design corporate strategies and long-term development plans.

ENERGIES (2022)

添加到收藏夹

Review Engineering, Environmental

Major metals demand, supply, and environmental impacts to 2100: A critical review

Takuma Watari et al.

Summary: Sustainable metal supply requires coordinated strategy and policy. Global demand for major metals is projected to increase continuously, but current extraction and processing scenarios lack explicit linkages to Earth's carrying capacity. Opportunities across entire life cycles of metal resources need more attention.

RESOURCES CONSERVATION AND RECYCLING (2021)

添加到收藏夹

Article Engineering, Chemical

Surface chemistry investigation of froth flotation products of lead-zinc sulfide ore using ToF-SIMS and multivariate analysis

Hao Lai et al.

Summary: This study investigated the surface chemistry differences between minerals in lead concentrate and tailings in complex flotation circuits of lead-zinc sulfide ores. The results showed that the adsorption of lead ions onto specific mineral surfaces was an important reason for the failed separation of minerals from galena. The surface chemical evidence provided by this study helps to better understand the selective separation mechanism of lead-zinc sulfide ores.

SEPARATION AND PURIFICATION TECHNOLOGY (2021)

添加到收藏夹

Article Engineering, Chemical

New insights related to the flotation of covellite in porphyry ores

Yesica L. Botero et al.

Summary: Covellite flotation can be influenced by collector type and dosage, while high PAX concentration and low pH are suitable for bulk flotation, and low IPETC dosage and high pH are optimal for selective flotation. Selective flotation of covellite is feasible with IPETC at alkaline pH with low dosage, while bulk flotation is achievable with PAX at pH 8 with high collector concentration. Covellite recovery remains constant over a wide range of pH values, allowing for selective separation from other sulfides such as pyrite.

MINERALS ENGINEERING (2021)

添加到收藏夹

Article Multidisciplinary Sciences

Critical importance of pH and collector type on the flotation of sphalerite and galena from a low-grade lead-zinc ore

Abdolrahim Foroutan et al.

Summary: The study investigated the impact of collector type and pulp pH on the lead-zinc ore flotation process, revealing that using the appropriate collector and optimal pH values can maximize lead and zinc purification.

SCIENTIFIC REPORTS (2021)

添加到收藏夹

Article Geochemistry & Geophysics

Biodepression of Copper-Activated Pyrite with Acidithiobacillus ferrooxidans in Flotation with Fresh and Seawater

Francisca San Martin et al.

Summary: The study demonstrates that Acidithiobacillus ferrooxidans can effectively depress non-activated and Cu-activated pyrite in freshwater across the entire pH range studied, while proving to be more effective in depressing non-activated and Cu-activated pyrite in seawater at pH 8 and 10 with optimal results achieved at pH 10.

MINERALS (2021)

添加到收藏夹

Article Environmental Sciences

Feasibility of re-processing mine tailings to obtain critical raw materials using real options analysis

Natalia Araya et al.

Summary: Re-processing mine tailings to obtain critical raw materials can reduce new mining activities, but it requires large industrial installations and specialized technologies. When making investment decisions in new mining projects, it is crucial to consider uncertainties and risks, and develop processes and technologies that can lower capital expenditure.

JOURNAL OF ENVIRONMENTAL MANAGEMENT (2021)

添加到收藏夹

Article Geochemistry & Geophysics

Potential of Tailing Deposits in Chile for the Sequestration of Carbon Dioxide Produced by Power Plants Using Ex-Situ Mineral Carbonation

Oscar Marin et al.

Summary: This study evaluated the potential of copper tailing deposits in Chile for sequestration of CO2 through mineral carbonation, while integrating the recovery of valuable metals. The research identified optimal locations for mineral carbonation plants in the Antofagasta region and estimated the CO2 sequestration potential of five tailing deposits. Additionally, it examined the technical, economic, and environmental feasibility of capturing, separating, and transporting CO2 from sources to mineral carbonation plants, especially considering the significant CO2 production from thermoelectric plants in the region.

MINERALS (2021)

添加到收藏夹

Review Geochemistry & Geophysics

Trends in Modeling, Design, and Optimization of Multiphase Systems in Minerals Processing

Luis A. Cisternas et al.

MINERALS (2020)

添加到收藏夹

Article Green & Sustainable Science & Technology

Towards mine tailings valorization: Recovery of critical materials from Chilean mine tailings

Natalia Araya et al.

JOURNAL OF CLEANER PRODUCTION (2020)

添加到收藏夹

Article Engineering, Chemical

The effect of regrinding on the design of flotation circuits

Renato Acosta-Flores et al.

MINERALS ENGINEERING (2020)

添加到收藏夹

Article Engineering, Chemical

Desulfurization of aged gold-bearing mine tailings

Ahlem Skandrani et al.

MINERALS ENGINEERING (2019)

添加到收藏夹

Article Geochemistry & Geophysics

Desulfurization of the Old Tailings at the Au-Ag-Cu Tiouit Mine (Anti-Atlas Morocco)

Abdelkrim Nadeif et al.

MINERALS (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Recovery of pyrite from copper tailings by flotation

Mario Santander et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2019)

添加到收藏夹

Article Engineering, Chemical

Flowsheet development for selective Cu-Pb-Zn recovery at Rosh Pinah concentrator

Nthapo Sehlotho et al.

MINERALS ENGINEERING (2018)

添加到收藏夹

Review Engineering, Chemical

A quasi-review of conceptual flotation design methods based on computational optimization

Luis A. Cisternas et al.

MINERALS ENGINEERING (2018)

添加到收藏夹

Article Engineering, Chemical

Effects of type and dosages of organic depressants on pyrite floatability in microflotation system

Mehran Ahmadi et al.

ADVANCED POWDER TECHNOLOGY (2018)

添加到收藏夹

Article Engineering, Chemical

A methodology for the conceptual design of flotation circuits by combining group contribution, local/global sensitivity analysis, and reverse simulation

Felipe D. Sepulveda et al.

INTERNATIONAL JOURNAL OF MINERAL PROCESSING (2017)

添加到收藏夹

Article Green & Sustainable Science & Technology

Skills and capabilities for a sustainable and circular economy: The changing role of design

Irel Carolina De los Rios et al.

JOURNAL OF CLEANER PRODUCTION (2017)

添加到收藏夹

Article Engineering, Chemical

Application of linear circuit analysis in the evaluation of mineral processing circuit design under uncertainty

Seyed Hassan Amini et al.

MINERALS ENGINEERING (2017)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Cost modelling for flotation machines

S. Arfania et al.

JOURNAL OF THE SOUTHERN AFRICAN INSTITUTE OF MINING AND METALLURGY (2017)

添加到收藏夹

Article Engineering, Chemical

Cu-Ni processing improvements at First Quantum's Kevitsa mine

Benjamin Musuku et al.

MINERALS ENGINEERING (2016)

添加到收藏夹

Article Engineering, Chemical

A strategy for the identification of optimal flotation circuits

Daniel A. Calisaya et al.

MINERALS ENGINEERING (2016)

添加到收藏夹

Article Engineering, Chemical

The depression of pyrite in selective flotation by different reagent systems - A Literature review

Yufan Mu et al.

MINERALS ENGINEERING (2016)

添加到收藏夹

Article Engineering, Chemical

Approximate recovery values for each stage are sufficient to select the concentration circuit structures

Luis A. Cisternas et al.

MINERALS ENGINEERING (2015)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

A methodology for the conceptual design of concentration circuits: Group contribution method

Felipe D. Sepulveda et al.

COMPUTERS & CHEMICAL ENGINEERING (2014)

添加到收藏夹

Review Green & Sustainable Science & Technology

Designing mine tailings for better environmental, social and economic outcomes: a review of alternative approaches

Mansour Edraki et al.

JOURNAL OF CLEANER PRODUCTION (2014)

添加到收藏夹

Article Engineering, Chemical

Effect of the objective function in the design of concentration plants

Luis A. Cisternas et al.

MINERALS ENGINEERING (2014)

添加到收藏夹

Article Engineering, Chemical

Determining flotation circuit layout using genetic algorithms with pulp and froth models

W. Hu et al.

CHEMICAL ENGINEERING SCIENCE (2013)

添加到收藏夹

Article Engineering, Chemical

State of the art in the conceptual design of flotation circuits

David A. Mendez et al.

INTERNATIONAL JOURNAL OF MINERAL PROCESSING (2009)

添加到收藏夹

Article Engineering, Chemical

Selection of the economic objective function for the optimization of process flow sheets

Z. Novak Pintaric et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2006)

添加到收藏夹

Article Engineering, Chemical

A MILP model for the design of mineral flotation circuits

LA Cisternas et al.

INTERNATIONAL JOURNAL OF MINERAL PROCESSING (2004)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Flowsheet synthesis of fractional crystallization processes with cake washing

L Cisternas et al.

COMPUTERS & CHEMICAL ENGINEERING (2004)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.