☆ 4.7 Article

Fabrication of a sandwich panel by integrating coconut husk with polyurethane foam and optimization using R2

CONSTRUCTION AND BUILDING MATERIALS (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Chemistry, Physical

Multifunctional Polyurethane Composites with Coffee Grounds and Wood Sawdust

Przemyslaw Bartczak et al.

Summary: Currently, managing food and production waste for biocomposites is crucial for the development of a closed circulation economy. Utilizing waste materials of natural origin can result in innovative composites with enhanced properties. The study investigates the use of coffee grounds and oak sawdust as fillers for rigid polyurethane foam. The composites exhibited improved compressive strength and thermal conductivity, and did not compromise fire resistance.

MATERIALS (2023)

添加到收藏夹

Article

Developing lightweight concrete bricks by replacing fine aggregate with vermiculite: a regression analysis prediction approach

G. Nakkeeran et al.

Asian Journal of Civil Engineering (2023)

添加到收藏夹

Article Thermodynamics

Effect of graphite on tribological and mechanical properties of PA6/5GF composites

Kamlendra Vikram et al.

Summary: The influence of graphite on the mechanical and tribological properties of glass fiber-reinforced PA6 composites was studied. The addition of 1% graphite significantly enhanced the tribological and mechanical characteristics of the composites, making them suitable for further applications.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2023)

添加到收藏夹

Article

Prediction and analysis of sandwich panel with rice husk and polyurethane foam using machine learning model

Prerna Sharma et al.

Asian Journal of Civil Engineering (2023)

添加到收藏夹

Article Polymer Science

Evaluation of the Effect of Waste from Agricultural Production on the Properties of Flexible Polyurethane Foams

Joanna Paciorek-Sadowska et al.

Summary: The management of by-products and waste from agriculture and the agri-food industry is challenging for the plastics industry. Flexible polyurethane foams containing ground corncake from corn oil production were successfully obtained, and the influence of the bio-filler on the physico-mechanical and thermal properties of the synthesized foams was investigated. The results showed that the modified foams had similar or even better properties than the reference sample without bio-filler.

POLYMERS (2023)

添加到收藏夹

Article Construction & Building Technology

Living wall systems for improved thermal performance of existing buildings

Matthew Fox et al.

Summary: Living wall systems are a new form of facade cladding treatment that can improve thermal efficiency and biodiversity of buildings. Research has shown that retrofitting existing buildings with living wall systems can significantly reduce thermal transmission values and decrease fluctuations in heat flux, helping to minimize heat loss.

BUILDING AND ENVIRONMENT (2022)

添加到收藏夹

Article Mechanics

Experimental and numerical analysis of a novel curved sandwich panel with pultruded GFRP strip core

Donghui Zhao et al.

Summary: A novel curved sandwich panel with pultruded GFRP strip core was proposed and studied in this work. Experimental and numerical results showed that increasing the surface thickness can improve load-carrying capacity and change the failure mode.

COMPOSITE STRUCTURES (2022)

添加到收藏夹

Article Environmental Sciences

Eco-friendly polyurethane foams based on castor polyol reinforced with acai residues for building insulation

Beatriz P. de Oliveira et al.

Summary: The search for sustainable materials in the construction sector has led to the investigation of natural materials with specific properties. This research focuses on the addition of acai waste to castor oil-based polyurethane to improve its properties. The results show that the addition of fiber reduces pore size, improves crystallinity and hydrophobicity, while also decreasing compressive strength and increasing impact resistance.

JOURNAL OF MATERIAL CYCLES AND WASTE MANAGEMENT (2022)

添加到收藏夹

Article Engineering, Industrial

Bending properties of sandwich sheets with metallic face sheets and additively manufactured 3D CFRP lattice cores

Jingwei Zhang et al.

Summary: This study systematically investigated the bending properties of sandwich sheets with 3D printed carbon fiber reinforced plastic lattice cores, clarifying the key factors affecting structural properties. Common failure modes during bending of sandwich sheets were deeply investigated by theoretical models and experimental tests.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2022)

添加到收藏夹

Review Polymer Science

From plant phenols to novel bio-based polymers

Chaoqun Zhang et al.

Summary: Replacing petroleum-based products with inexpensive, biorenewable, natural materials is essential for sustainable development and will make a significant impact on the polymer industry and the environment. Biorenewable plant phenols, with their unique structures and abundance, are of great industrial significance.

PROGRESS IN POLYMER SCIENCE (2022)

添加到收藏夹

Article Engineering, Multidisciplinary

Flexural property evaluation of web reinforced GFRP-PET foam sandwich panel: Experimental study and numerical simulation

Honglei Xie et al.

Summary: This study focused on the flexural property of PET foam-filled lattice composite sandwich panels under four-point bending. Increasing the thickness of face sheet and PET foam can effectively improve the ultimate load of the panels. Experimental results and theoretical predictions showed errors within 10% for bending stiffness and ultimate load.

COMPOSITES PART B-ENGINEERING (2022)

添加到收藏夹

Article Construction & Building Technology

Chemical and physical effects of polyurethane-precursor-based reactive modifier on the low-temperature performance of bitumen

Tianshuai Li et al.

Summary: The use of novel polyurethane-precursor-based reactive modifier (PRM) in modifying bitumen improves its performance and protects the environment. Through physicochemical characterizations and quantum chemical calculations, the chemical reactions and low-temperature behaviors of PRM-modified bitumen were studied. The results show that PRM reacts with active sites in bitumen, forming carbamate, urea, and amide linkages, leading to crosslinking polymerization. The modification process promotes the conversion of resin to asphaltene, enhancing the natural segregation of maltene and asphaltene. The reconfiguration and crosslinking of asphaltene molecules result in improved stiffness and fracture resistance. However, an increase in PRM concentration leads to a slight increase followed by a decrease in low-temperature properties. This research provides insights into the PRM modification mechanism and offers guidance for the further application of PRM-modified bitumen.

CONSTRUCTION AND BUILDING MATERIALS (2022)

添加到收藏夹

Article Construction & Building Technology

Experimental behavior of plaster/cork functionally graded core sandwich panels with polymer skins

Sara Medjmadj et al.

Summary: This study investigates the manufacturing, mechanical, physical, and thermal properties of plaster/cork functionally graded core sandwich structures. The results indicate that the graded core configuration shows promising potential in terms of bearing strength, ductility, and thermal insulation compared to conventional structures.

CONSTRUCTION AND BUILDING MATERIALS (2022)

添加到收藏夹

Article Green & Sustainable Science & Technology

Coconut oil for utility transformers - Environmental safety and sustainability perspectives

Anu Kumar Das et al.

Summary: This paper examines the application of natural esters and new vegetable oils as alternatives to conventional mineral oils in the electric utility. It focuses on the dielectric performance and environmental safety of coconut oil, and discusses its sustainability and market potential.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2022)

添加到收藏夹

Review Construction & Building Technology

Polyurethane as a modifier for road asphalt: A literature review

Gang Huang et al.

Summary: This paper reviews the research progress of polyurethane as an asphalt modifier for roads, including its advantages, preparation processes, and road performance. It also discusses the research directions and development trends of polyurethane in this field.

CONSTRUCTION AND BUILDING MATERIALS (2022)

添加到收藏夹

Article Green & Sustainable Science & Technology

Microstructural pore analysis using SEM and ImageJ on the absorption of treated coconut shell aggregate

T. Thilagashanthi et al.

Summary: By studying six treatments on coconut shell aggregate and analyzing the microstructure using scanning electron microscopy and ImageJ software, it was found that proper treatment can reduce the water absorption of coconut shells to 0% and improve performance. Considering both performance and cost, the two best treatment materials for coconut shells are sago flour and slaked lime.

JOURNAL OF CLEANER PRODUCTION (2021)

添加到收藏夹

Article Construction & Building Technology

Failure mechanism of geopolymer composite lightweight sandwich panel under flexural and edgewise compressive loads

Yanqiang Cui et al.

Summary: This paper introduces a new lightweight sandwich panel made with FRGC skin layers and PUR foam core for prefabricated buildings. The failure mechanisms of the panel under flexural bending and edgewise compressive loading are investigated, and analytical models are proposed for predicting the critical failure load.

CONSTRUCTION AND BUILDING MATERIALS (2021)

添加到收藏夹

Article Environmental Sciences

Impact of the Jatoba shell residue amount on polyurethane foams based on castor polyol

Isabella L. M. Costa et al.

Summary: This study explores the use of Jatoba shell residues as reinforcement in castor oil-based polyurethane biocomposites, showing improved mechanical properties, crystallinity, thermal stability, and hydrophobicity with the addition of fibers. The research suggests that these biocomposites can be a great option for environmental applications such as industrial water purification and oil sorption.

JOURNAL OF MATERIAL CYCLES AND WASTE MANAGEMENT (2021)

添加到收藏夹

Article Construction & Building Technology

Elevated temperature thermal properties of fire protective boards and insulation materials for light steel frame systems

Edward Steau et al.

Summary: This study investigated the elevated temperature thermal properties of a range of building materials used in cold-formed light gauge steel frame systems in Australia, New Zealand, and Europe. The specific heat, thermal conductivity, and other thermal properties of 21 potential LSF components were determined using various test methods. The results identified suitable materials with high specific heat, low thermal conductivity, and enhanced fire resistance levels for use in LSF systems.

JOURNAL OF BUILDING ENGINEERING (2021)

添加到收藏夹

Article Materials Science, Textiles

Palm Fibers Residues from Agro-industries as Reinforcement in Biopolymer Filaments for 3D-printed Scaffolds

Noelle Zanini et al.

Summary: The study showed that using PHBV biocomposites filled with bleached fibers of palm residues for 3D printing of scaffolds has the advantages of biodegradability, biocompatibility, and non-toxicity, while also promoting reuse of agricultural residues and by-products. The addition of bleached BFPR to PHBV enhanced cell viability, improved wettability, and slightly increased nanohardness. The composite scaffolds had an interconnected porous structure with a pore size of about 900μm and a filling rate of 60%.

FIBERS AND POLYMERS (2021)

添加到收藏夹

Article Chemistry, Physical

Waste Wood Particles from Primary Wood Processing as a Filler of Insulation PUR Foams

Radoslaw Mirski et al.

Summary: This study explores the preparation process and performance of open-cell PUR foams by adding waste wood particles. The addition of 10% waste wood particles can increase the compressive strength of PUR foams by 30% and reduce the thermal conductivity coefficient by 10%.

MATERIALS (2021)

添加到收藏夹

Article Engineering, Mechanical

Compressive behaviour of a nickel superalloy Superni 263 honeycomb sandwich panel

S. S. Satheesh Kumar et al.

JOURNAL OF SANDWICH STRUCTURES & MATERIALS (2020)

添加到收藏夹

Article Construction & Building Technology

Mechanical, thermal and acoustic behaviour of polymer-based composite materials produced with rice husk and expanded cork by-products

Beatriz Marques et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

添加到收藏夹

Article Chemistry, Physical

Bio-Based Polyurethane Composites and Hybrid Composites Containing a New Type of Bio-Polyol and Addition of Natural and Synthetic Fibers

Adam Olszewski et al.

MATERIALS (2020)

添加到收藏夹

Article Construction & Building Technology

The potential and current status of earthen material for low-cost housing in rural India

Yask Kulshreshtha et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

添加到收藏夹

Article Materials Science, Characterization & Testing

Nutmeg filler as a natural compound for the production of polyurethane composite foams with antibacterial and anti-aging properties

Sylwia Czlonka et al.

POLYMER TESTING (2020)

添加到收藏夹

Article Materials Science, Characterization & Testing

Effect of walnut shells and silanized walnut shells on the mechanical and thermal properties of rigid polyurethane foams

Sylwia Czlonka et al.

POLYMER TESTING (2020)

添加到收藏夹

Article Polymer Science

Influence of NCO/OH ratio on preparation of four agricultural wastes liquefied polyols based polyurethane foams

Jingmiao Zhang et al.

POLYMER DEGRADATION AND STABILITY (2020)

添加到收藏夹

Article Engineering, Environmental

Evaluation of rubber powder waste as reinforcement of the polyurethane derived from castor oil

Nycolle G. S. Silva et al.

WASTE MANAGEMENT (2020)

添加到收藏夹

Article Construction & Building Technology

Trapezoidal core sandwich panel produced with sugarcane bagasse

Thales Pozzer et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

添加到收藏夹

Review Green & Sustainable Science & Technology

Recent advancement in the natural fiber polymer composites: A comprehensive review

S. Vigneshwaran et al.

JOURNAL OF CLEANER PRODUCTION (2020)

添加到收藏夹

Article Polymer Science

Green Polyurethanes from Renewable Isocyanates and Biobased White Dextrins

Jakob Konieczny et al.

POLYMERS (2019)

添加到收藏夹

Article Chemistry, Physical

Three-Dimensional Nano-Morphology of Carbon Nanotube/Epoxy Filled Poly(methyl methacrylate) Microcapsules

M. Galip Icduygu et al.

MATERIALS (2019)

添加到收藏夹

Article Construction & Building Technology

Characterization study on coconut shell concrete with partial replacement of cement by GGBS

V. R. Prasath Kumar et al.

JOURNAL OF BUILDING ENGINEERING (2019)

添加到收藏夹

Review Construction & Building Technology

Review on soft polyurethane flame retardant

P. M. Visakh et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

添加到收藏夹

Review Polymer Science

Polyurethane Composite Foams in High-Performance Applications: A Review

Ayesha Kausar

POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING (2018)

添加到收藏夹

Article Engineering, Multidisciplinary

Properties of natural fibre composites for structural engineering applications

Kin-tak Lau et al.

COMPOSITES PART B-ENGINEERING (2018)

添加到收藏夹

Review Construction & Building Technology

The use of polyurethane for structural and infrastructural engineering applications: A state-of-the-art review

H. M. C. C. Somarathna et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Coconut shell powder reinforced thermoplastic polyurethane/natural rubber blend-composites: effect of silane coupling agents on the mechanical and thermal properties of the composites

Aparna K. Balan et al.

JOURNAL OF MATERIALS SCIENCE (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Reuse of waste paper and rice hulls as filler in polymeric matrix composites

Eliana Paula Calegari et al.

MATERIA-RIO DE JANEIRO (2017)

添加到收藏夹

Article Materials Science, Composites

Influence of filler surface characteristics on morphological, physical, acoustic properties of polyurethane composite foams filled with inorganic fillers

Giwook Sung et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2017)

添加到收藏夹

Article Construction & Building Technology

Characterization of eco-efficient acoustic insulation materials (traditional and innovative)

M. Pedroso et al.

CONSTRUCTION AND BUILDING MATERIALS (2017)

添加到收藏夹

Article Polymer Science

Modification of flexible polyurethane foams by the addition of natural origin fillers

Anna Bryskiewicz et al.

POLYMER DEGRADATION AND STABILITY (2016)

添加到收藏夹

Article Engineering, Aerospace

Sandwich Structured Composites for Aeronautics: Methods of Manufacturing Affecting Some Mechanical Properties

Aneta Krzyhak et al.

INTERNATIONAL JOURNAL OF AEROSPACE ENGINEERING (2016)

添加到收藏夹

Review Chemistry, Multidisciplinary

Polyurethane types, synthesis and applications - a review

John O. Akindoyo et al.

RSC ADVANCES (2016)

添加到收藏夹

Article Construction & Building Technology

Acoustic characterization of natural fibers for sound absorption applications

Umberto Berardi et al.

BUILDING AND ENVIRONMENT (2015)

添加到收藏夹

Article Construction & Building Technology

Behaviour of PU-foam/glass-fibre composite sandwich panels under flexural static load

A. Mostafa et al.

MATERIALS AND STRUCTURES (2015)

添加到收藏夹

Article Construction & Building Technology

Using image analysis to measure the porosity distribution of a porous pavement

William D. Martin et al.

CONSTRUCTION AND BUILDING MATERIALS (2013)

添加到收藏夹

Article Materials Science, Characterization & Testing

Polyurethane foams based on modified tung oil and reinforced with rice husk ash I: Synthesis and physical chemical characterization

Virginia Ribeiro da Silva et al.

POLYMER TESTING (2013)

添加到收藏夹

Article Chemistry, Physical

Occurrence of two-photon absorption saturation in Ag nanocolloids, prepared by chemical reduction method

K. Mani Rahulan et al.

APPLIED SURFACE SCIENCE (2012)

添加到收藏夹

Article Construction & Building Technology

Long term study on compressive and bond strength of coconut shell aggregate concrete

K. Gunasekaran et al.

CONSTRUCTION AND BUILDING MATERIALS (2012)

添加到收藏夹

Article Materials Science, Composites

Polyurethane Foams Obtained from Castor Oil-based Polyol and Filled with Wood Flour

M. A. Mosiewicki et al.

JOURNAL OF COMPOSITE MATERIALS (2009)

添加到收藏夹

Article Construction & Building Technology

Net climatic impact of solid foam insulation produced with halocarbon and non-halocarbon blowing agents

L. D. Danny Harvey

BUILDING AND ENVIRONMENT (2007)

添加到收藏夹

Article Materials Science, Multidisciplinary

Novel soy oil based polyurethane composites: Fabrication and dynamic mechanical properties evaluation

JPL Dwan'isa et al.

JOURNAL OF MATERIALS SCIENCE (2004)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.