☆ 4.7 Article

Numerical modelling of 3D concrete printing: material models, boundary conditions and failure identification

ENGINEERING STRUCTURES (2024)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Construction & Building Technology

Extrusion process simulation and layer shape prediction during 3D-con-crete-printing using the Particle Finite Element Method

Janis Reinold et al.

Summary: In this study, numerical analyses were conducted to investigate the flow processes and forces during material extrusion in additively manufactured concrete components. The results were validated using laboratory 3D-printing experiments. It was found that the forces generated under the extrusion nozzle could cause deformations in substrate layers, and a novel indicator based on the yielding material was introduced to find optimal 3D-printing parameters to prevent plastic deformations.

AUTOMATION IN CONSTRUCTION (2022)

添加到收藏夹

Article Engineering, Civil

3D concrete printing modelling of thin-walled structures

Vuong Nguyen-Van et al.

Summary: This study implements a numerical model to simulate the failure mechanisms in 3D concrete printing, and validates the model's accuracy. Sensitivity and parametric analyses reveal the influence of printing process parameters on buildability.

STRUCTURES (2022)

添加到收藏夹

Article Construction & Building Technology

Digital design computing and modelling for 3-D concrete printing

Vuong Nguyen-Van et al.

Summary: A novel computational framework for 3D concrete printing process is proposed in this paper to capture layer-by-layer buildability and failure modes of complex structures. The framework is validated to predict printed outcomes accurately and reveal the buildability differences between different structures.

AUTOMATION IN CONSTRUCTION (2021)

添加到收藏夹

Article Construction & Building Technology

VoxelPrint: A Grasshopper plug-in for voxel-based numerical simulation of concrete printing

Gieljan Vantyghem et al.

Summary: This paper presents a Grasshopper plug-in for 3D concrete printing applications, allowing users to construct simulation files. The plug-in caters to both experts and non-experts, providing a broad range of input parameters for optimizing 3D prints.

AUTOMATION IN CONSTRUCTION (2021)

添加到收藏夹

Article Construction & Building Technology

The Slugs-test for extrusion-based additive manufacturing: Protocol, analysis and practical limits

Nicolas Ducoulombier et al.

Summary: This paper introduces a novel rheological technique for assessing the yield stress of printable materials at nozzle exit in extrusion-based 3D printing. The technique analyzes the non-Newtonian flow at the nozzle exit, which leads to the formation of material drops. By measuring the mass distribution of the drops with a simple balance, the yield stress can be computed, and material homogeneity can be assessed. The technique is experimentally validated on simple materials before application to a real printing system, with equations derived for yield stress computation and discussion on accuracy and applicability range.

CEMENT & CONCRETE COMPOSITES (2021)

添加到收藏夹

Article Construction & Building Technology

Technologies for improving buildability in 3D concrete printing

Shravan Muthukrishnan et al.

Summary: This paper presents a systematic review and original concepts for improving the buildability of concrete. Two methods, additives during initial mixing and buildability enhancement at the print-head by intervention, are discussed. The latter method includes various techniques to rapidly increase the material strength prior to extrusion without affecting pumpability. Future prospects for a new set-on-demand method are also presented.

CEMENT & CONCRETE COMPOSITES (2021)

添加到收藏夹

Article Construction & Building Technology

Ambient temperature cured 'just-add-water' geopolymer for 3D concrete printing applications

Shin Hau Bong et al.

Summary: The research aims to improve the printability performance and mechanical properties of a geopolymer for 3D concrete printing by adjusting the type and dosage of activators and retarders to identify an optimum mixture. The results show that the optimum mixture exhibits excellent performance and energy-saving indicators, contributing to the large-scale applications and commercial viability of geopolymers in 3D concrete printing.

CEMENT & CONCRETE COMPOSITES (2021)

添加到收藏夹

Article Construction & Building Technology

Direct printing test for buildability of 3D-printable concrete considering economic viability

Venkatesh Naidu Nerella et al.

AUTOMATION IN CONSTRUCTION (2020)

添加到收藏夹

Article Construction & Building Technology

Evaluating the printability of concretes containing lightweight coarse aggregates

A. Rahul et al.

CEMENT & CONCRETE COMPOSITES (2020)

添加到收藏夹

Article Construction & Building Technology

Yield stress criteria to assess the buildability of 3D concrete printing

R. Jayathilakage et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

添加到收藏夹

Review Construction & Building Technology

3-D printing of concrete: Beyond horizons

Mohammad S. Khan et al.

CEMENT AND CONCRETE RESEARCH (2020)

添加到收藏夹

Review Construction & Building Technology

Numerical simulations of concrete processing: From standard formative casting to additive manufacturing

Nicolas Roussel et al.

CEMENT AND CONCRETE RESEARCH (2020)

添加到收藏夹

Article Construction & Building Technology

Modelling of 3D concrete printing based on computational fluid dynamics

Raphael Comminal et al.

CEMENT AND CONCRETE RESEARCH (2020)

添加到收藏夹

Article Automation & Control Systems

Structural failure during extrusion-based 3D printing processes

R. J. M. Wolfs et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)

添加到收藏夹

Article Construction & Building Technology

Large-scale digital concrete construction-CONPrint3D concept for on-site, monolithic 3D-printing

Viktor Mechtcherine et al.

AUTOMATION IN CONSTRUCTION (2019)

添加到收藏夹

Article Construction & Building Technology

Triaxial compression testing on early age concrete for numerical analysis of 3D concrete printing

R. J. M. Wolfs et al.

CEMENT & CONCRETE COMPOSITES (2019)

添加到收藏夹

Article Construction & Building Technology

Early age mechanical behaviour of 3D printed concrete: Numerical modelling and experimental testing

R. J. M. Wolfs et al.

CEMENT AND CONCRETE RESEARCH (2018)

添加到收藏夹

Article Construction & Building Technology

Rheological requirements for printable concretes

Nicolas Roussel

CEMENT AND CONCRETE RESEARCH (2018)

添加到收藏夹

Article Engineering, Mechanical

Mechanical performance of wall structures in 3D printing processes: Theory, design tools and experiments

A. S. J. Suiker

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2018)

添加到收藏夹

Article Engineering, Manufacturing

Additive manufacturing of concrete in construction: potentials and challenges of 3D concrete printing

Freek Bos et al.

VIRTUAL AND PHYSICAL PROTOTYPING (2016)

添加到收藏夹

Article Construction & Building Technology

Developments in construction-scale additive manufacturing processes

S. Lim et al.

AUTOMATION IN CONSTRUCTION (2012)

添加到收藏夹

Article Construction & Building Technology

Mix design and fresh properties for high-performance printing concrete

T. T. Le et al.

MATERIALS AND STRUCTURES (2012)

添加到收藏夹

Article Engineering, Multidisciplinary

A fictitious domain approach with spread interface for elliptic problems with general boundary conditions

Isabelle Ramiere et al.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2007)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.