相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。
Article
Engineering, Mechanical
Wojciech Macek et al.
Summary: The study investigates the fracture surface topography of X8CrNiS18-9 austenitic stainless-steel specimens for different loadings and notch radii, aiming to supplement the knowledge about fracture mechanisms for fatigue performance. A fracture surface topography fatigue damage model is proposed based on the correlation between stress amplitude and fracture topography characteristics. The predictions are close to the experimental results.
ENGINEERING FAILURE ANALYSIS
(2022)
Article
Engineering, Mechanical
Yang Duo et al.
Summary: This study investigates the correlation between morphology characterization parameters and contact performance, aiming to identify the significant roughness parameters that influence contact stress. The research proposes a method for screening roughness parameters and uses various analytical techniques to establish a regression model and demonstrate the quantitative influences of these parameters on contact stress. The findings provide valuable insights into characterizing contact performance based on specific roughness parameters.
JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME
(2022)
Article
Engineering, Mechanical
Yang Duo et al.
Summary: This research proposes a combination of statistical theory and data-driven analysis to solve the problems of grinding parameter inversion and surface roughness characterization. The results show that skewness and kurtosis are important for the optimal inversion model and surface characterization.
JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME
(2022)
Review
Chemistry, Physical
Aleksander Swietlicki et al.
Summary: This paper reviews shot peening methods and analyzes their effects on the surface properties of metallic components. It also highlights the need to research the effects of peening, especially cavitation peening, on the anti-wear and corrosion performance of additively manufactured metallic materials. The paper emphasizes the lack of research on the treatment of additively manufactured metallic materials in cavitation peening and the absence of studies combining shot peening and cavitation peening in one hybrid process.
Article
Engineering, Mechanical
Yang Duo et al.
Summary: This study investigated the relationship between height distribution parameters and interface contact stress, analyzing their influence under different loads using various methods. The results showed that the order of influence of the height distribution parameters on surface contact stress was Sq > Ssk > Sku, and the impact of Ssk and Sku gradually decreased with increasing load. Additionally, the influence of Ssk and Sku on the contact performance varied among different roughness surfaces. The research findings provide a reference and technical support for the active design of rough surface microstructures to improve contact performance.
SURFACE TOPOGRAPHY-METROLOGY AND PROPERTIES
(2022)
Article
Engineering, Mechanical
Fujia Xia et al.
Summary: This paper proposes a novel method for shot peening surface reconstruction to accurately characterize the height and texture features of rough surfaces. The experimental results show that with the improved FFT method and the new autocorrelation function, the reconstructed surface achieves good agreement with the measured surface.
SURFACE TOPOGRAPHY-METROLOGY AND PROPERTIES
(2022)
Article
Engineering, Multidisciplinary
Pawel Pawlus et al.
Summary: There is a problem with selecting areal parameters to describe surface texture, and analyzing the linear correlation between parameters can help in this selection process. By measuring and analyzing surface topographies after various machining treatments, sets of parameters that describe different surface groups were determined. It was found that specific parameters can be used to identify the machining process, and certain pairs of parameters better characterize the distribution of surface texture.
Article
Chemistry, Physical
Duo Yang et al.
Summary: Among the 26 roughness parameters in ISO 25178 standard, the parameters used to characterize surface performance lack scientificity and unity, leading to confusion in their application. A new method is proposed to divide these parameters into characterization parameter sets (CPS) and redundant parameter sets (RPS), and establish mapping relationships between them. The research shows that CPS is of great significance for surface performance and has the ability to fully cover surface topography information.
Review
Chemistry, Physical
Haibo Zhang et al.
Summary: This paper reviews the classic work on wear modeling and provides a comprehensive summary of adhesive wear numerical models and techniques based on physical parameters. It investigates wear mechanisms at both the asperity level and rough surfaces, and suggests future work on considering more realistic geometries and material properties for adhesive wear modeling.
Article
Engineering, Mechanical
Jinyuan Tang et al.
Summary: Surface roughness parameters are crucial for grinding surface performance. Traditional rough surface modeling methods cannot control the defined features accurately. This research proposes a novel numerical reconstruction method that utilizes a specific rough parameter set (SRPS) and employs a neural network for inversion, achieving numerical reconstruction of grinding surfaces.
SURFACE TOPOGRAPHY-METROLOGY AND PROPERTIES
(2022)
Article
Engineering, Mechanical
Duo Yang et al.
Summary: The paper proposes a reasonable method for selecting parameters related to CS performance characterization to avoid empirical selection errors from a theoretical perspective; a correlation relationships bridge is built between MIP and CS, with a quantitative influence of parameters on contact stress studied and clarified.
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY
(2021)
Article
Engineering, Multidisciplinary
R. W. Maruda et al.
Summary: This study evaluates the impact of different cooling/lubricating techniques on the surface integrity during turning of AISI 1045 steel. The results show that applying MQCL + EP/AW turning method can generate surfaces with more even distribution of valleys and peaks, leading to a reduction in selected roughness height parameters.
Article
Engineering, Mechanical
Lin Li et al.
Summary: The linear filtering model is commonly used to control the areal autocorrelation function (AACF), but it has limitations in handling anisotropic surfaces and cross-textured surfaces. A new AACF constraint function is proposed in this paper, which can reconstruct isotropic, anisotropic, and cross-textured surfaces more accurately and efficiently. Numerical experiments show that the proposed constraint function improves the fit for isotropic and anisotropic surfaces, but there are still errors for cross-textured surfaces, suggesting room for further improvement in the linear filtering model.
TRIBOLOGY INTERNATIONAL
(2021)
Article
Engineering, Mechanical
Ryo Sakakibara et al.
Summary: The study introduces a newly developed algorithm to evaluate the running-in wear process of plateau surfaces, addressing the calculation problems and human judgment required in previous methods. This proposed method offers easy, precise, and direct evaluation of plateau surfaces and is expected to aid in determining optimal machining methods and conditions.
TRIBOLOGY INTERNATIONAL
(2021)
Review
Engineering, Multidisciplinary
Pawel Pawlus et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
(2020)
Article
Engineering, Mechanical
Weihua Zhou et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
(2020)
Article
Engineering, Mechanical
Marko Sedlacek et al.
TRIBOLOGY TRANSACTIONS
(2017)
Article
Engineering, Multidisciplinary
P. Nieslony et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
(2017)
Article
Engineering, Manufacturing
L. D. Todhunter et al.
CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY
(2017)
Article
Engineering, Multidisciplinary
G. M. Krolczyk et al.
Article
Engineering, Multidisciplinary
P. Nieslony et al.
Article
Engineering, Multidisciplinary
G. M. Krolczyk et al.
Article
Engineering, Mechanical
Liming Chang et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY
(2013)
Article
Optics
Raynald Laheurte et al.
Article
Engineering, Multidisciplinary
Qunfen Qi et al.
Article
Engineering, Mechanical
M. Sedlacek et al.
Review
Engineering, Mechanical
M. Bigerelle et al.
TRIBOLOGY INTERNATIONAL
(2007)
Article
Engineering, Manufacturing
GP Petropoulos et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
(2003)
Article
Engineering, Industrial
ES Gadelmawla et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
(2002)
