☆ 4.6 Article

Impact of drug load and polymer molecular weight on the 3D microstructure of printed tablets

EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES (2024)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Pharmacology & Pharmacy

3D printing of pharmaceutical oral solid dosage forms by fused deposition: The enhancement of printability using plasticised HPMCAS

Sinmisola Oladeji et al.

Summary: This study aims to prepare filaments for FDM-3DP using hot-melt extrusion (HME) and evaluate the effect of HME-filament composition on printability. It shows that changing the formulation and adding talc can improve the mechanical properties of the filaments. The research also successfully printed drug-loaded and placebo formulations, providing tailored drug release profiles based on variation of internal geometry.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2022)

添加到收藏夹

Article Pharmacology & Pharmacy

Assessment of the Extrusion Process and Printability of Suspension-Type Drug-Loaded Affinisol™ Filaments for 3D Printing

Gloria Mora-Castano et al.

Summary: Three-dimensional printing technology can design new drug delivery systems for personalized medicine. This study evaluated the extrusion process and appearance of filaments made from a hydrophilic polymer and a non-molten model drug. The study found a critical point in the extrusion process at a drug load of 30-40%.

PHARMACEUTICS (2022)

添加到收藏夹

Review Pharmacology & Pharmacy

Amorphous Solid Dispersions: Role of the Polymer and Its Importance in Physical Stability and In Vitro Performance

Qin Shi et al.

Summary: This review provides a comprehensive overview of the recent developments in understanding the role of polymers in amorphous solid dispersions. Topics covered include nucleation, crystal growth, overall crystallization, miscibility, phase separation, dissolution, and supersaturation. The critical properties of polymers that affect the physical stability and in vitro performance of amorphous solid dispersions are highlighted. The review also offers perspectives on current research gaps and novel research directions.

PHARMACEUTICS (2022)

添加到收藏夹

Article Pharmacology & Pharmacy

Adjusting the dose in paediatric care: dispersing four different aspirin tablets and taking a proportion

Jorgen Brustugun et al.

Summary: This study aimed to investigate the effects of tablet formulation and manipulation technique on dose accuracy and precision when dispersing different aspirin tablets for children. The results showed that only dispersible tablets provided doses within 20% of the intended dose, highlighting the importance of considering tablet formulation and extraction technique in such manipulations.

EUROPEAN JOURNAL OF HOSPITAL PHARMACY (2021)

添加到收藏夹

Review Pharmacology & Pharmacy

Polymers in pharmaceutical additive manufacturing: A balancing act between printability and product performance

Rydvikha Govender et al.

Summary: This article highlights the crucial role of polymeric materials in additive manufacturing of oral dosage forms and suggests ways to stimulate their use. By exploring polymer properties and new characterization techniques, it aims to facilitate the continued development of 3D printers for a wider variety of polymers in pharmaceutical additive manufacturing.

ADVANCED DRUG DELIVERY REVIEWS (2021)

添加到收藏夹

Review Pharmacology & Pharmacy

3D Printing as a Promising Tool in Personalized Medicine

Vanessa Marcia Vaz et al.

Summary: Personalized medicine aims to tailor medication to individuals based on their physiology, drug response, and genetic profile. One major technology emerging to enable personalized medicine is 3D printing, which can create a variety of pharmaceutical dosage forms. The future application of this technology may include dispensing prescriptions based on individual needs in a clinical setting.

AAPS PHARMSCITECH (2021)

添加到收藏夹

Article Pharmacology & Pharmacy

Development of FDM 3D-printed tablets with rapid drug release, high drug-polymer miscibility and reduced printing temperature by applying the acid-base supersolubilization (ABS) principle

Nirali G. Patel et al.

Summary: In this study, the development of FDM 3D printed tablets faced challenges such as slow drug release, lack of drug-polymer miscibility, high processing temperature, and poor printability. However, by utilizing acid-base supersolubilization (ABS) principle, these issues were successfully addressed. The use of specific formulations allowed for printing of tablets at low temperatures and rapid and complete drug release rates were achieved.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2021)

添加到收藏夹

Article Pharmacology & Pharmacy

3D-Printed Coating of Extended-Release Matrix Tablets: Effective Tool for Prevention of Alcohol-Induced Dose Dumping Effect

Barbora Skalicka et al.

Summary: The study investigated the effect of 3D printing coating on drug release mechanism and rate, finding that the Affinisol coating was effective in preventing alcohol-induced dose dumping effect and could be useful for delayed release of active substances.

PHARMACEUTICS (2021)

添加到收藏夹

Review Pharmacology & Pharmacy

Challenges of fused deposition modeling 3D printing in pharmaceutical applications: Where are we now?

Chloe Parulski et al.

Summary: Fused deposition modeling is widely used in the pharmaceutical field for personalized dosage forms and modified drug release profiles, but it faces challenges related to material-specific, operation-specific, and machine-specific parameters. Addressing these challenges is crucial for speeding up the development of objects in the pharmaceutical market.

ADVANCED DRUG DELIVERY REVIEWS (2021)

添加到收藏夹

Article Pharmacology & Pharmacy

Investigation on hot melt extrusion and prediction on 3D printability of pharmaceutical grade polymers

Atabak Ghanizadeh Tabriz et al.

Summary: The study evaluated the printability of a range of drug-loaded and plain polymers, identifying maximum tensile strength as the most critical property for prediction of printability. Principal component analysis was used to determine the contribution of each mechanical property, providing important insights for the research.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2021)

添加到收藏夹

Article Biochemistry & Molecular Biology

Influence of Drug Load on the Printability and Solid-State Properties of 3D-Printed Naproxen-Based Amorphous Solid Dispersion

Eric Ofosu Kissi et al.

Summary: This study investigated the influence of drug load on the printability and physical stability of 3D-printed pharmaceutical products. Adjusting the drug ratio can improve printability without compromising the physical stability of the amorphous solid dispersion.

MOLECULES (2021)

添加到收藏夹

Article Pharmacology & Pharmacy

Development of a quantitative method to evaluate the printability of filaments for fused deposition modeling 3D printing

Pengchong Xu et al.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2020)

添加到收藏夹

Article Pharmacology & Pharmacy

Screening of pharmaceutical polymers for extrusion-Based Additive Manufacturing of patient-tailored tablets

A. Samaro et al.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2020)

添加到收藏夹

Article Pharmacology & Pharmacy

Manipulation of Medicinal Products for Oral Administration to Paediatric Patients at a German University Hospital: An Observational Study

Julia Zahn et al.

PHARMACEUTICS (2020)

添加到收藏夹

Article Chemistry, Medicinal

Roadmap to 3D-Printed Oral Pharmaceutical Dosage Forms: Feedstock Filament Properties and Characterization for Fused Deposition Modeling

Johanna Aho et al.

JOURNAL OF PHARMACEUTICAL SCIENCES (2019)

添加到收藏夹

Review Pharmacology & Pharmacy

Characterisation of pore structures of pharmaceutical tablets: A review

Daniel Markl et al.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2018)

添加到收藏夹

Article Chemistry, Medicinal

Formulation of 3D Printed Tablet for Rapid Drug Release by Fused Deposition Modeling: Screening Polymers for Drug Release, Drug-Polymer Miscibility and Printability

Nayan G. Solanki et al.

JOURNAL OF PHARMACEUTICAL SCIENCES (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Analysis of 3D Prints by X-ray Computed Microtomography and Terahertz Pulsed Imaging

Daniel Markl et al.

PHARMACEUTICAL RESEARCH (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

3D inkjet printing of tablets exploiting bespoke complex geometries for controlled and tuneable drug release

Mary Kyobula et al.

JOURNAL OF CONTROLLED RELEASE (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

Anti-tuberculosis drug combination for controlled oral delivery using 3D printed compartmental dosage forms: From drug product design to in vivo testing

Natalja Genina et al.

JOURNAL OF CONTROLLED RELEASE (2017)

添加到收藏夹

Article Pediatrics

Manipulating tablets and capsules given to hospitalised children in Norway is common practice

Kathrin Bjerknes et al.

ACTA PAEDIATRICA (2017)

添加到收藏夹

Article Pharmacology & Pharmacy

A New Extrudable Form of Hypromellose: AFFINISOL™ HPMC HME

Siyuan Huang et al.

AAPS PHARMSCITECH (2016)

添加到收藏夹

Article Pharmacology & Pharmacy

Hot-melt extruded filaments based on pharmaceutical grade polymers for 3D printing by fused deposition modeling

Alice Melocchi et al.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2016)

添加到收藏夹

Article Chemistry, Medicinal

Three-Dimensional Printed PCL-Based Implantable Prototypes of Medical Devices for Controlled Drug Delivery

Jenny Hollander et al.

JOURNAL OF PHARMACEUTICAL SCIENCES (2016)

添加到收藏夹

Article Chemistry, Physical

New Melting Data of the Two Polymorphs of Prednisolone

Yohann Corvis et al.

JOURNAL OF PHYSICAL CHEMISTRY B (2016)

添加到收藏夹

Article Pharmacology & Pharmacy

A flexible-dose dispenser for immediate and extended release 3D printed tablets

Katarzyna Pietrzak et al.

EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2015)

添加到收藏夹

Article Medicine, Research & Experimental

Comparative Study of Different Methods for the Prediction of Drug-Polymer Solubility

Matthias Manne Knopp et al.

MOLECULAR PHARMACEUTICS (2015)

添加到收藏夹

Review Immunology

Steroids in kidney transplant patients

Robert W. Steiner et al.

SEMINARS IN IMMUNOPATHOLOGY (2011)

添加到收藏夹

Article Pharmacology & Pharmacy

Investigation of critical polymer properties for polymer release and swelling of HPMC matrix tablets

Anna Viriden et al.

EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES (2009)

添加到收藏夹

Article Chemistry, Multidisciplinary

Estimation of Drug-Polymer Miscibility and Solubility in Amorphous Solid Dispersions Using Experimentally Determined Interaction Parameters

Patrick J. Marsac et al.

PHARMACEUTICAL RESEARCH (2009)

添加到收藏夹

Article Chemistry, Medicinal

Thermal inkjet application in the preparation of oral dosage forms: Dispensing of prednisolone solutions and polymorphic characterization by solid-state spectroscopic techniques

Peter A. Melendez et al.

JOURNAL OF PHARMACEUTICAL SCIENCES (2008)

添加到收藏夹

Article Chemistry, Multidisciplinary

Theoretical and practical approaches for prediction of drug-polymer miscibility and solubility

Patrick J. Marsac et al.

PHARMACEUTICAL RESEARCH (2006)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.