☆ 4.8 Article

Wafer-Scale Fabrication of 2D Nanostructures via Thermomechanical Nanomolding

SMALL (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Materials Science, Multidisciplinary

Nanomolding of metastable Mo4P3

Mehrdad T. Kiani et al.

Summary: Reduced dimensionality in quantum materials leads to emergent phenomena. Accelerated materials discovery is needed for nanoscale quantum materials in reduced dimensions. Nanomolding is a rapid synthesis method that produces high-quality single-crystalline nanowires with controlled dimensions. Here, nanomolding is applied to fabricate nanowires from MoP bulk feedstock, resulting in the creation of metastable Mo4P3 nanowires. This demonstrates the ability of nanomolding to explore previously inaccessible synthesis spaces, as well as the incomplete understanding of interfacial solid diffusion in nanomolding.

MATTER (2023)

添加到收藏夹

Article Materials Science, Multidisciplinary

Experimental decoding of grain boundary-based plastic deformation

Yupeng Wu et al.

Summary: In this study, the electron backscatter diffraction (EBSD) technique was used to identify grain boundaries (GBs) in a metal sheet surface, and the metal sheet was deformed via contact with a hard nanomold. The microstructure evolution and the influence of individual GBs on plastic deformation during nanomolding of crystalline Ag at different temperatures and stresses were investigated. The results revealed that diffusion-based mechanisms become dominant at temperatures above a critical value, and the GB-affected zone was measured to be several micrometers. Based on the decoded GB-based deformation mechanism, a prevalent deformation mechanism map can be experimentally constructed with high efficiency.

ACTA MATERIALIA (2022)

添加到收藏夹

Review Materials Science, Multidisciplinary

Nanofabrication through molding

Ze Liu et al.

Summary: Nanomolding is a versatile top-down fabrication method suitable for a wide range of materials and states of matter. It offers solutions for the fabrication of various nanomaterials for diverse applications and improvements in lithography techniques. Recent advances in nanomolding have transformed nanofabrication by allowing designs to be selected from a wide palette of materials.

PROGRESS IN MATERIALS SCIENCE (2022)

添加到收藏夹

Article Multidisciplinary Sciences

Observation of enhanced nanoscale creep flow of crystalline metals enabled by controlling surface wettability

Jun-Xiang Xiang et al.

Summary: Understanding and controlling interface friction are crucial in scientific and engineering applications. By using a thermomechanical nanomolding technique, this study presents a strategy to decouple the interplay of surface chemistry, plastic deformation, and interface friction, and reveals the superior creep flow rate of superhydrophobic nanochannels compared to hydrophilic ones.

NATURE COMMUNICATIONS (2022)

添加到收藏夹

Review Chemistry, Multidisciplinary

Recent Advances in Plasmonic Nanostructures for Enhanced Photocatalysis and Electrocatalysis

Siwei Li et al.

Summary: Plasmonic nanomaterials coupled with catalytically active surfaces offer unique opportunities for catalysis applications, utilizing surface plasmons to drive various chemical reactions. Recent advances in designing highly efficient plasmonic nanostructures and understanding the underlying mechanisms of surface plasmon have led to significant progress in plasmon-driven photochemical reactions and plasmon-enhanced electrocatalytic reactions. Challenges and future opportunities for plasmonic nanomaterials in the field of energy conversion and storage are also discussed.

ADVANCED MATERIALS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Wettability, Diffusion Behaviors, and Modeling of Ni Nanoparticles and Nanowires in Brazing Inconel 718

Denzel Bridges et al.

Summary: Ni nanoparticles (NPs) and nanowires (NWs) are compared as brazing filler metals for joining Inconel 718. NWs significantly enhance the strength of brazed joints compared to NP joints. The experiment displays that the contact angle in brazing with NPs is higher than that with NWs, and a modified Hart's equation is proposed for predicting the effective interdiffusion coefficients of nanomaterials. The enhanced brazing strength with NW fillers is explained by the size-dependent transient liquid phase diffusion that mainly controls the diffusion coefficients determined by Sauer-Friese analysis for NWs.

ADVANCED ENGINEERING MATERIALS (2021)

添加到收藏夹

Review Materials Science, Multidisciplinary

Materials for interconnects

Daniel Gall et al.

Summary: As interconnect wires shrink in size, their electrical resistance increases, leading to signal delay and higher energy consumption. Research into new materials systems and processing methods is needed to address this size effect and produce narrow high-conductivity lines.

MRS BULLETIN (2021)

添加到收藏夹

Article Multidisciplinary Sciences

Unleashing nanofabrication through thermomechanical nanomolding

Naijia Liu et al.

Summary: Advancements in nanotechnology require the development of diverse nanofabrication tools, and revealing and utilizing the thermomechanical nanomolding mechanisms can result in a highly versatile nanofabrication toolbox.

SCIENCE ADVANCES (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

py4DSTEM: A Software Package for Four-Dimensional Scanning Transmission Electron Microscopy Data Analysis

Benjamin H. Savitzky et al.

Summary: STEM enables imaging, diffraction, and spectroscopy of materials at various length scales, producing rich 4D-STEM datasets. The py4DSTEM analysis toolkit, written in Python, aims to extract material properties through complex analysis pipelines, with the goal of improving standards in electron microscopy data and methods.

MICROSCOPY AND MICROANALYSIS (2021)

添加到收藏夹

Review Nanoscience & Nanotechnology

Two-Photon-Assisted Polymerization and Reduction: Emerging Formulations and Applications

Chee Leng Lay et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

添加到收藏夹

Article Physics, Multidisciplinary

General Nanomolding of Ordered Phases

Naijia Liu et al.

PHYSICAL REVIEW LETTERS (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Metals by Micro-Scale Additive Manufacturing: Comparison of Microstructure and Mechanical Properties

Alain Reiser et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

添加到收藏夹

Article Physics, Multidisciplinary

Investigation of Temperature and Feature Size Effects on Deformation of Metals by Superplastic Nanomolding

Ze Liu

PHYSICAL REVIEW LETTERS (2019)

添加到收藏夹

Article Physics, Multidisciplinary

Nanomolding of Crystalline Metals: The Smaller the Easier

Ze Liu et al.

PHYSICAL REVIEW LETTERS (2019)

添加到收藏夹

Article Multidisciplinary Sciences

Selective increase in CO2 electroreduction activity at grain-boundary surface terminations

Ruperto G. Mariano et al.

SCIENCE (2017)

添加到收藏夹

Article Multidisciplinary Sciences

One-step fabrication of crystalline metal nanostructures by direct nanoimprinting below melting temperatures

Ze Liu

NATURE COMMUNICATIONS (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

Nanolattices: An Emerging Class of Mechanical Metamaterials

Jens Bauer et al.

ADVANCED MATERIALS (2017)

添加到收藏夹

Review Chemistry, Multidisciplinary

Nanomanufacturing: A Perspective

J. Alexander Liddle et al.

ACS NANO (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

Finite element analysis of the grain size effect on diffusion in polycrystalline materials

V. Lacaille et al.

COMPUTATIONAL MATERIALS SCIENCE (2014)

添加到收藏夹

Review Materials Science, Multidisciplinary

A brief review of atomic layer deposition: from fundamentals to applications

Richard W. Johnson et al.

MATERIALS TODAY (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

Grain boundary width, energy and self-diffusion in nickel: Effect of material purity

D. Prokoshkina et al.

ACTA MATERIALIA (2013)

添加到收藏夹

Review Chemistry, Multidisciplinary

Plasmonics in Nanostructures

Zheyu Fang et al.

ADVANCED MATERIALS (2013)

添加到收藏夹

Review Chemistry, Multidisciplinary

Hybrid Nanostructures for Energy Storage Applications

Arava Leela Mohana Reddy et al.

ADVANCED MATERIALS (2012)

添加到收藏夹

Article Chemistry, Multidisciplinary

Applications of Colloidal Inorganic Nanoparticles: From Medicine to Energy

Samuel E. Lohse et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2012)

添加到收藏夹

Article Physics, Condensed Matter

Surface energy calculation of the fcc metals by using the MAEAM

Yan-Ni Wen et al.

SOLID STATE COMMUNICATIONS (2007)

添加到收藏夹

Review Chemistry, Multidisciplinary

Nanostructures in biodiagnostics

NL Rosi et al.

CHEMICAL REVIEWS (2005)

添加到收藏夹

Article Electrochemistry

A novel method of etching copper oxide using acetic acid

KL Chavez et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2001)

添加到收藏夹

Article Nanoscience & Nanotechnology

Identifiying creep mechanisms at low stresses

TG Langdon

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2000)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.