4.7 Article

Extrinsic oxygen defects in SnO/SnO2 heterostructure for efficient NO2 gas detection

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Chemistry, Analytical

Manganese (Mn2+) doped hexagonal prismatic zinc oxide (ZnO) nanostructures for chemiresistive NO2 sensor

K. Suganthi et al.

Summary: In this study, the operation and performance of ZnO nanostructures doped with Mn nanoparticles for toxic nitrogen dioxide detection were investigated. The results showed that increasing Mn dopant concentrations significantly enhanced the NO2 response of the sensor, with good repeatability and stability.

SENSORS AND ACTUATORS B-CHEMICAL (2023)

Article Multidisciplinary Sciences

High-performance selective NO2 gas sensor based on In2O3-graphene-Cu nanocomposites

Alexander Khort et al.

Summary: This study reports the synthesis, characterization, and investigation of gas sensing properties of In2O3-graphene-Cu composite nanomaterials. The nanocomposite exhibits a closely interconnected and highly defective structure, resulting in high sensitivity and selectivity to various oxidizing and reducing gases, particularly NO2.

SCIENTIFIC REPORTS (2023)

Article Chemistry, Analytical

Modern pied pipers: Child social media influencers and junk food on YouTube-A study from Germany

Minkyung Lee et al.

Summary: We synthesized Au nanoparticles (NPs) anchored porous ZnO nanosheets (Au-ZnO NSs) using microwave assistance and demonstrated their application in the sensitive detection of 2-chloroethyl ethyl sulfide (2-CEES) vapors. The highly crystalline Au NPs with a narrow size distribution were densely formed on the ZnO NSs surface, increasing the density of oxygen vacancies. The Au-ZnO NS sensor showed a significantly higher response to 2-CEES compared to the bare ZnO NS sensor.

SENSORS AND ACTUATORS B-CHEMICAL (2023)

Article Chemistry, Physical

Mixed Tin-Titanium Oxides by Atomic Layer Deposition on Planar Substrates: Physical and Electronic Structure

Michael J. Mortelliti et al.

Summary: Ternary atomic layer deposition of Sn-doped TiOx and Ti-doped SnOx was conducted, demonstrating deviations from the rule of mixtures in terms of chemical composition and optical properties. This deviation was attributed to the non-ideal surface chemistry of the binary ALD of SnOx. The presence of intra-bandgap states in the films induced enhanced visible absorption and bathochromic shifts in the apparent bandgap.

APPLIED SURFACE SCIENCE (2022)

Article Engineering, Environmental

A Multi-functional NO2 gas monitor and Self-Alarm based on Laser-Induced graphene

Zhirong Peng et al.

Summary: The development of high-performance gas monitoring system is urgent due to serious air pollution, with a focus on nitrogen dioxide. A laser-induced graphene-based multi-functional NO2 monitor and self-alarm system was designed to achieve high sensitivity and reliable early warning, integrating MoS2 and LIG materials for improved performance at room temperature. The system also demonstrates timely acoustic warning response to excessive NO2 concentrations.

CHEMICAL ENGINEERING JOURNAL (2022)

Article Biochemical Research Methods

ToF-SIMS Depth Profiling of Metal, Metal Oxide, and Alloy Multilayers in Atmospheres of H2, C2H2, CO, and O2

Jernej Ekar et al.

Summary: The study investigated the influence of flooding gas during ToF-SIMS depth profiling to reduce matrix effects and improve the quality of depth profiles. The application of different atmospheres during SIMS depth profiling improved the results.

JOURNAL OF THE AMERICAN SOCIETY FOR MASS SPECTROMETRY (2022)

Article Chemistry, Analytical

Metal oxide gas sensors for detecting NO2 in industrial exhaust gas: Recent developments

Qingting Li et al.

Summary: This article reviews the NO2 gas sensor based on metal oxides. It discusses the hazards of NO2, the disadvantages of chemiresistive sensors based on metal oxides, and different sensitive materials. It also explores NO2 gas sensors based on metal oxides from various aspects such as morphology, preparation, modification, doping, and composite.

SENSORS AND ACTUATORS B-CHEMICAL (2022)

Article Chemistry, Analytical

Tunable oxygen vacancies of cobalt oxides for efficient gas sensing application

Yushu Shi et al.

Summary: This study successfully detected triethylamine (TEA) using newly generated p-type Co3O4 nanosheets with rich oxygen vacancies, showing high sensitivity, excellent selectivity, and stability at an operating temperature of 200 degrees Celsius. By controlling annealing temperature to adjust oxygen vacancies and particle morphologies, a new approach for designing p-type metal oxide semiconductor nanomaterials for gas sensing applications was proposed.

SENSORS AND ACTUATORS B-CHEMICAL (2022)

Article Chemistry, Multidisciplinary

Visible Light Driven Ultrasensitive and Selective NO2 Detection in Tin Oxide Nanoparticles with Sulfur Doping Assisted by l-Cysteine

Tae Hoon Eom et al.

Summary: In the pandemic era, the development of high-performance indoor air quality monitoring sensors is more critical than ever. This study presents a visible light-driven ultrasensitive and selective chemoresistive NO2 sensor based on sulfur-doped SnO2 nanoparticles. The sensor exhibits extraordinary gas sensing performance and stability, making it suitable for indoor air quality monitoring.
Article Materials Science, Ceramics

Precise control of surface oxygen vacancies in ZnO nanoparticles for extremely high acetone sensing response

Jihyun Lee et al.

Summary: The study demonstrates a simple method to control surface oxygen vacancies on commercial ZnO nanpowders, enhancing acetone sensing performance significantly. The combination of H2O2 treatment and thermal annealing produces optimal surface defects leading to improved sensor response, surpassing previous acetone sensors based on metal oxide semiconductors.

JOURNAL OF ADVANCED CERAMICS (2022)

Article Chemistry, Multidisciplinary

Fe3+-Derived Boosted Charge Transfer in an FeSi4P4 Anode for Ultradurable Li-Ion Batteries

Mahboobeh Nazarian-Samani et al.

Summary: This study demonstrates the advantage of charge transfer over mass transport in ensuring ultrastable electrochemical performance in anodes of metal-ion batteries. The research also shows that charge transfer governs the quality, composition, and morphology of a solid-electrolyte interphase (SEI) film. By developing FeSi4P4-carbon nanotube (FSPC) and reduced-FeSi4P4-carbon nanotube (R-FSPC) heterostructures, significant improvements in charge transfer and performance were achieved.

ACS NANO (2022)

Article Chemistry, Analytical

Shape-controlled SnO and their improved properties in the field of gas sensor, photocatalysis, and lithium-ion battery

Qianqian Ren et al.

Summary: In this study, various morphologies of SnO materials were synthesized using a solvothermal process. SnO samples with unique morphologies, such as bowl-like, pompon-like, sheet-like, and hollow frame-like structures, exhibited excellent NO2 gas sensing, photocatalytic degradation, and lithium-ion battery properties due to their large specific surface area and more active sites. These SnO samples with unique morphologies showed low detection limits, fast response and recovery time for NO2 gas sensing.

SENSORS AND ACTUATORS B-CHEMICAL (2022)

Review Engineering, Electrical & Electronic

Nanostructured metal oxide semiconductor-based gas sensors: A comprehensive review

Kurugundla Gopi Krishna et al.

Summary: This article reviews the synthesis methods and sensing properties of nanostructured metal oxide semiconductor-based gas sensors, and summarizes the novel gas sensors and their characteristics under environmental pollution. Prospects for future research on the gas sensing mechanism of metal oxide semiconductors are proposed.

SENSORS AND ACTUATORS A-PHYSICAL (2022)

Article Chemistry, Analytical

Ultra-high response and low temperature NO2 sensor based on mesoporous SnO2 hierarchical microtubes synthesized by biotemplating process

Yan-Xue Zhen et al.

Summary: SnO2 sensing material with hierarchical microtube structure and mesoporous characteristics synthesized using poplar branch as bio-template showed high response and rapid recovery time, as well as low detection limit, good selectivity, humidity resistance, and long-term stability.

SENSORS AND ACTUATORS B-CHEMICAL (2022)

Article Materials Science, Multidisciplinary

SnO/SnO2 heterojunction: an alternative candidate for sensing NO2 with fast response at room temperature

Pengtao Wang et al.

Summary: The SnO2-based family is an important gas-sensitive material, but its practical application is limited by the high working temperature. SnO/SnO2 heterojunction shows excellent performance for sensing NO2 at room temperature, with a faster response compared to SnO.

FRONTIERS OF MATERIALS SCIENCE (2022)

Review Nanoscience & Nanotechnology

Heteronanostructural metal oxide-based gas microsensors

Lin Liu et al.

Summary: The development of high-performance, portable, and miniaturized gas sensors has become increasingly important in various fields. Metal oxide semiconductor (MOS)-based chemiresistive gas sensors are the most popular choice due to their high stability, low cost, and high sensitivity. To further enhance the sensor performance, constructing MOS-based nanoscale heterojunctions is essential. However, the sensing mechanism of heteronanostructural MOS-based sensors is complex and influenced by various parameters. This review introduces concepts in designing high-performance gas sensors and discusses the impact of geometric device structure on sensor performance.

MICROSYSTEMS & NANOENGINEERING (2022)

Article Chemistry, Multidisciplinary

Direct in situ spectroscopic evidence of the crucial role played by surface oxygen vacancies in the O2-sensing mechanism of SnO2

Stefan Kucharski et al.

Summary: In this study, the nature of interactions between SnO2 and O-2 in conductometric gas sensors (CGS) was investigated. Results showed a correlation between the dynamically changing surface oxygen vacancies and the resistance response in SnO2-based CGS. It was concluded that surface oxygen vacancies, rather than the observed oxygen adsorbates, are central to response generation in SnO2-based gas sensors.

CHEMICAL SCIENCE (2022)

Article Engineering, Environmental

Fast detection of NO2 by porous SnO2 nanotoast sensor at low temperature

Ji Li et al.

Summary: The study synthesized porous SnO2 nanotoasts with a large surface area and fabricated thick film sensors with high response to NO2 gas. The sensors exhibited excellent performance at 50 degrees C, including high response, low detection limitation, fast response time, and wide detection range.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Article Chemistry, Multidisciplinary

Resolving Fast Gas Transients with Metal Oxide Sensors

Damien Drix et al.

Summary: The study successfully combines high-resolution data acquisition with a specific processing method to extract fast onset events of short odor pulses, which can effectively address the challenges faced by electronic noses in natural environments.

ACS SENSORS (2021)

Article Engineering, Environmental

Precise control of heat-treatment conditions to improve the catalytic performance of V2O5/TiO2 for H2S removal

Jae Hwan Yang et al.

Summary: The results suggested that the catalyst heat-treated at 400 degrees C under N-2 atmosphere (N-400) exhibited excellent catalytic performance for H2S removal, with high H2S conversion and sulfur yield. The study highlighted the importance of precisely controlled heat-treatment to enhance catalytic activity for H2S removal.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Article Chemistry, Analytical

Shape-controlled and stable hollow frame structures of SnO and their highly sensitive NO2 gas sensing

Qianqian Ren et al.

Summary: Tin monoxide (SnO) microstructures with novel hollow frame morphologies were successfully synthesized using a solvothermal method. These structures showed excellent gas-sensing performances with low detection limits and short response/recovery time for NO2, demonstrating promising potential for gas sensors applications.

SENSORS AND ACTUATORS B-CHEMICAL (2021)

Article Chemistry, Analytical

Highly selective triethylamine sensing based on SnO/SnO2 nanocomposite synthesized by one-step solvothermal process and sintering

Lingling Meng et al.

Summary: SnO/SnO2 nanocomposites synthesized by one-step solvothermal process show excellent sensing performance for triethylamine, with rapid response, high sensitivity, low response time and detection limit, as well as outstanding stability and repeatability. The superior sensing performance makes SnO/SnO2 a potential sensing material for triethylamine detection.

SENSORS AND ACTUATORS B-CHEMICAL (2021)

Review Materials Science, Multidisciplinary

X-ray photoelectron spectroscopy: Towards reliable binding energy referencing

G. Greczynski et al.

PROGRESS IN MATERIALS SCIENCE (2020)

Article Chemistry, Analytical

Oxygen vacancy defects engineering on Ce-doped α-Fe2O3 gas sensor for reducing gases

Xiao Wang et al.

SENSORS AND ACTUATORS B-CHEMICAL (2020)

Article Nanoscience & Nanotechnology

Oxygen Vacancies Enabled Porous SnO2 Thin Films for Highly Sensitive Detection of Triethylamine at Room Temperature

Yongshan Xu et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Article Materials Science, Multidisciplinary

Oxygen vacancy engineering of self-doped SnO2-x nanocrystals for ultrasensitive NO2 detection

Meng Shao et al.

JOURNAL OF MATERIALS CHEMISTRY C (2020)

Editorial Material Chemistry, Multidisciplinary

Tutorial on Powder X-ray Diffraction for Characterizing Nanoscale Materials

Cameron F. Holder et al.

ACS NANO (2019)

Article Materials Science, Multidisciplinary

Heating Method Effect on SnO Micro-Disks as NO2 Gas Sensor

Mateus G. Masteghin et al.

FRONTIERS IN MATERIALS (2019)

Article Chemistry, Multidisciplinary

Designing SnO2 Nanostructure-Based Sensors with Tailored Selectivity toward Propanol and Ethanol Vapors

Rapelang G. Motsoeneng et al.

ACS OMEGA (2019)

Article Chemistry, Physical

Size-Dependent Oxidation State and CO Oxidation Activity of Tin Oxide Clusters

Yusuke Inomata et al.

ACS CATALYSIS (2018)

Review Chemistry, Multidisciplinary

Principles and applications of EPR spectroscopy in the chemical sciences

Maxie M. Roessler et al.

CHEMICAL SOCIETY REVIEWS (2018)

Article Chemistry, Analytical

p-N heterostructural sensor with SnO-SnO2 for fast NO2 sensing response properties at room temperature

Hai Yu et al.

SENSORS AND ACTUATORS B-CHEMICAL (2018)

Article Chemistry, Analytical

Controlled growth of ZnO nanorod arrays via wet chemical route for NO2 gas sensor applications

Sharadrao A. Vanalakar et al.

SENSORS AND ACTUATORS B-CHEMICAL (2015)

Article Chemistry, Physical

Lithium storage in carbon-coated SnO2 by conversion reaction

X. W. Guo et al.

JOURNAL OF POWER SOURCES (2013)

Article Chemistry, Analytical

Hierarchical SnO/SnO2 nanocomposites: Formation of in situ p-n junctions and enhanced H2 sensing

Arunkumar Shanmugasundaram et al.

SENSORS AND ACTUATORS B-CHEMICAL (2013)

Article Chemistry, Multidisciplinary

SnO mesocrystals: additive-free synthesis, oxidation, and top-down fabrication of quantum dots

Junhua Zhao et al.

CRYSTENGCOMM (2012)

Article Chemistry, Multidisciplinary

Tin Oxide-Carbon Nanotube Composite for NOX Sensing

Dong Mi Jang et al.

JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY (2012)

Review Chemistry, Analytical

Semiconducting metal oxides as sensors for environmentally hazardous gases

K. Wetchakun et al.

SENSORS AND ACTUATORS B-CHEMICAL (2011)

Article Physics, Applied

p-channel thin-film transistor using p-type oxide semiconductor, SnO

Yoichi Ogo et al.

APPLIED PHYSICS LETTERS (2008)