☆ 4.7 Article

Computational verification of conductive Be2Zn monolayer as a superior anode for alkali and alkaline ion batteries

CHEMICAL ENGINEERING JOURNAL (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Review Chemistry, Physical

Next generation 2D materials for anodes in battery applications

Madhu Raj Kumar et al.

Summary: This review provides an overview of the synthesis and application of 2D materials for lithium-ion batteries, discussing the main issues in synthesis methods, material properties, and problems and proposed solutions during charging and discharging.

JOURNAL OF POWER SOURCES (2023)

添加到收藏夹

Article Chemistry, Multidisciplinary

Theoretical determination of superior high-temperature thermoelectricity in an n-type doped 2H-ZrI2 monolayer

Jia Wen et al.

Summary: In this study, the thermoelectric properties of monolayer 2H-ZrI2 were systematically evaluated using first-principles calculations and semiclassical Boltzmann transport theory. The material exhibited good structural stability and experimental feasibility, with a moderate indirect bandgap of 1.07 eV and an acceptable lattice thermal conductivity of 6.69 W m(-1) K-1. A large power factor of up to 147.89 mW m(-1) K-2 could be achieved due to the conduction band valley degeneracy near the Fermi level. These findings suggest the potential application of monolayer 2H-ZrI2 in high-temperature thermoelectric devices.

NANOSCALE (2023)

添加到收藏夹

Review Chemistry, Multidisciplinary

Advanced Anode Materials for Rechargeable Sodium-Ion Batteries

Shuangyan Qiao et al.

Summary: Rechargeable sodium-ion batteries (SIBs) face challenges in electrode materials due to the large ionic radius of Na-ion. However, progress has been made in intercalation, conversion, alloying, conversion-alloying, and organic anode materials for SIBs. Various optimization strategies have been summarized to improve the electrochemical properties of anodes. The merits, drawbacks, challenges, and future directions for high-performance anode materials are discussed.

ACS NANO (2023)

添加到收藏夹

Article Chemistry, Physical

2-dimensional biphenylene monolayer as anode in Li ion secondary battery with high storage capacity: Acumen from density functional theory

Nidhi Duhan et al.

Summary: In this study, the potential of a novel 2D monolayer material, Biphenylene, as a negative electrode for lithium-ion batteries was investigated using density functional theory. The experimental results showed that Biphenylene has high stability, low diffusion barrier, and high storage capacity, making it a suitable candidate for LIBs.

APPLIED SURFACE SCIENCE (2023)

添加到收藏夹

Article Energy & Fuels

Evaluating the potential of planar h-BSb monolayer as anode materials for sodium-ion batteries from first principles methods

Abdelali Elomrani et al.

Summary: Researchers used density functional theory calculations to investigate honeycomb Boron Antimony (h-BSb) monolayer as a suitable anode material for sodium/magnesium/calcium ion batteries. h-BSb showed high adsorption energy, fast ion diffusion, metallic state upon adsorption, suitable voltage, low structural change, and good recovery after desorption for sodium and calcium ion batteries. Notably, h-BSb demonstrated a high capacity of 1213 mAh g-1 for sodium ion batteries, making it a potential anode material built from the heavy element antimony. The study also suggested four features, including a flat 2D morphology, metallic or small bandgap semiconductor, high surface reactivity, and appropriate pore size, for constructing high-capacity systems and recommended the chemical composition of heavy and light atomic elements for obtaining the desired pore size.

JOURNAL OF ENERGY STORAGE (2023)

添加到收藏夹

Article Multidisciplinary Sciences

Fast charging of energy-dense lithium-ion batteries

Chao-Yang Wang et al.

Summary: Researchers have achieved fast charging of high-energy density batteries using an asymmetric temperature modulation and a thermally stable dual-salt electrolyte method, allowing for a 75% state of charge in just 12 minutes. They have also developed a digital twin to assess cooling and safety, demonstrating the feasibility of thermally modulated 4C charging with air convection.

NATURE (2022)

添加到收藏夹

Review Energy & Fuels

Potential of potassium and sodium-ion batteries as the future of energy storage: Recent progress in anodic materials

Indra Mohan et al.

Summary: This article reviews the feasibility of potassium-ion batteries and sodium-ion batteries as alternatives to lithium-ion batteries, and provides in-depth research on hard carbon anode materials generated from various biomass precursors and waste materials. The difficulties related to these materials are discussed, along with solutions to improve their electrochemical performance.

JOURNAL OF ENERGY STORAGE (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Prediction of boridenes as high-performance anodes for alkaline metal and alkaline Earth metal ion batteries

Baiyi Chen et al.

Summary: We conducted a comprehensive density functional theory investigation on the structural stability and electrochemical properties of boridenes as anode materials in rechargeable alkaline (earth) metal-ion batteries. The results show that Mo4/3B2 and Mo4/3B2O2 monolayers can accommodate various metal ions and form stable multi-layer adsorption structures. The bare Mo4/3B2 monolayer exhibits higher gravimetric capacities than Mo4/3B2O2 monolayer.

NANOSCALE (2022)

添加到收藏夹

Review Chemistry, Multidisciplinary

Active material and interphase structures governing performance in sodium and potassium ion batteries

Eun Jeong Kim et al.

Summary: This comprehensive review discusses ongoing studies on electrode materials for sodium ion batteries (SIBs) and potassium ion batteries (PIBs) in comparison to lithium ion batteries (LIBs). It emphasizes the importance of crystal structure for electrode materials and analyzes the associated intrinsic and dynamic structural properties and electrochemistry of alkali metal ions. The challenges and corresponding strategies for electrode materials and the electrolyte-electrode interface/interphase are also examined. The insights and discussions presented in this review can guide future investigations of SIBs and PIBs.

CHEMICAL SCIENCE (2022)

添加到收藏夹

Article Chemistry, Physical

Graphene-like BSi as a promising anode material for Li- and Mg-ion batteries: A first principle study

Chu Xiao et al.

Summary: Monolayer BSi has been predicted as a phonon-mediated superconductor and has been studied for its potential as an anode material for rechargeable batteries. The theoretical capacities of monolayer BSi towards Li and Mg storage are 1374 mAhg(-1) and 2749 mAhg(-1) respectively, with controllable volume change and high ion diffusion rate ensuring high performance in Li and Mg-ion batteries. These results provide insight into the energy-storage mechanisms and potential applications of 2D BSi materials.

APPLIED SURFACE SCIENCE (2021)

添加到收藏夹

Article Chemistry, Physical

BC6P Monolayer: Isostructural and Isoelectronic Analogues of Graphene with Desirable Properties for K-Ion Batteries

Meng Tang et al.

Summary: The BC6PK6 monolayer shows a high capacity of 1410 mAh/g, low diffusion barrier of 0.13 eV, and low open-circuit voltage of 0.35 V, making it a promising anode material for high-performance potassium-ion batteries. The metallic states induced by potassium adsorption provide electrical conductivity during the battery cycle, ensuring both high rate performance and high safety.

CHEMISTRY OF MATERIALS (2021)

添加到收藏夹

Article Engineering, Environmental

Metallic B2C monolayer as a promising anode material for Li/Na ion storage

Xiaohua Yu et al.

Summary: The metallic B2C shows high theoretical capacity of 1596 mAlrg-1 for both LIBs and NIBs and maintains good thermal stability and electronic conductivity, making it a potential high-performance anode material.

CHEMICAL ENGINEERING JOURNAL (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Iron Selenide Microcapsules as Universal Conversion-Typed Anodes for Alkali Metal-Ion Batteries

Shiyao Lu et al.

Summary: A high-performance yolk-shell FeSe2 microcapsule as the conversion-type anode material for AMIBs has been prepared, with an external carbon shell and internal electroactive FeSe2 nanoparticles. The shell structure provides sufficient inner void for electrolyte infiltration, improving electrochemical performance and showing potential application prospects.

SMALL (2021)

添加到收藏夹

Article Chemistry, Physical

Flexible borophosphene monolayer: A potential Dirac anode for high-performance non-lithium ion batteries

He Lin et al.

Summary: Using first principles calculations, the feasibility of borophosphene as a Dirac anode of NLIBs has been evaluated. Results show that borophosphene exhibits excellent conductivity, high adsorption energy, and high specific capacity, making it a potential anode for advanced sodium, potassium, and calcium-ion batteries.

APPLIED SURFACE SCIENCE (2021)

添加到收藏夹

Article Chemistry, Physical

Borophene-Based Three-Dimensional Porous Structures as Anode Materials for Alkali Metal-Ion Batteries with Ultrahigh Capacity

Imran Muhammad et al.

Summary: Novel metallic borophene-based 3D porous structures with stability, high capacity, and low migration energy barriers have been designed using density functional theory, making them promising for anode materials for lithium, sodium, and potassium ions.

CHEMISTRY OF MATERIALS (2021)

添加到收藏夹

Article Environmental Studies

Features of critical resource trade networks of lithium-ion batteries

Xu Tian et al.

Summary: Critical resources are crucial for low carbon development, and international trade in these resources is common. The study reveals that dominant countries tend to maintain close trade relationships, with trade scale being a key factor influencing competitiveness and influence in trade.

RESOURCES POLICY (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Comprehensive Study of Lithium Adsorption and Diffusion on Janus Mo/WXY (X, Y = S, Se, Te) Using First-Principles and Machine Learning Approaches

Gracie Chaney et al.

Summary: This study investigates the adsorption and diffusion of lithium atoms on regular and Janus TMD structures using density functional theory calculations. The results show that Janus structures may perform well as electrodes in battery applications and exhibit superior performance compared to graphene and regular TMDs. The research provides insights into the electronic properties and physical characteristics of two-dimensional materials for potential future applications.

ACS APPLIED MATERIALS & INTERFACES (2021)

添加到收藏夹

Review Materials Science, Multidisciplinary

Advanced Graphene Materials for Sodium/Potassium/Aluminum-Ion Batteries

Hanyan Xu et al.

Summary: The development of lithium-ion technology has revolutionized portable electronics, but the shortage of lithium resources has led to exploration of alternative batteries, such as sodium, potassium, and aluminum-ion batteries. Graphene materials used as electrodes play a crucial role in improving the performance and stability of batteries.

ACS MATERIALS LETTERS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Tuning the electrochemical performance of Ti3C2 and Hf3C2 monolayer by functional groups for metal-ion battery applications

Zhifang Yang et al.

Summary: The study reveals that functionalized MXenes have great potential as anode materials in metal-ion batteries, allowing for the design of new materials with excellent electrochemical performance through the control of chemical properties. S- and Cl-functionalized Ti3C2 and Hf3C2 monolayers serve as high stability and low diffusion energy barrier anode materials, especially showing promise in Li- and Na-ion batteries.

NANOSCALE (2021)

添加到收藏夹

Review Chemistry, Multidisciplinary

Planar Hypercoordinate Motifs in Two-Dimensional Materials

Yu Wang et al.

ACCOUNTS OF CHEMICAL RESEARCH (2020)

添加到收藏夹

Article Chemistry, Physical

Monolayer Be2P3N as a high capacity and high energy density anode material for ultrafast charging Na- and K-ion batteries

Shoutian Sun et al.

APPLIED SURFACE SCIENCE (2020)

添加到收藏夹

Review Chemistry, Multidisciplinary

Two-Dimensional Transition Metal Chalcogenides for Alkali Metal Ions Storage

Yingxi Zhang et al.

CHEMSUSCHEM (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Computational predictions of two-dimensional anode materials of metal-ion batteries

Jianyan Lin et al.

WILEY INTERDISCIPLINARY REVIEWS-COMPUTATIONAL MOLECULAR SCIENCE (2020)

添加到收藏夹

Article Chemistry, Physical

A record-high ion storage capacity of T-graphene as two-dimensional anode material for Li-ion and Na-ion batteries

Xiaoming Zhang et al.

APPLIED SURFACE SCIENCE (2020)

添加到收藏夹

Article Chemistry, Physical

Beryllene: A Promising Anode Material for Na- and K-Ion Batteries with Ultrafast Charge/Discharge and High Specific Capacity

Minglei Sun et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2020)

添加到收藏夹

Article Chemistry, Physical

Ultrahigh capacity 2D anode materials for lithium/sodium-ion batteries: an entirely planar B7P2 monolayer with suitable pore size and distribution

Changyan Zhu et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

添加到收藏夹

Article Chemistry, Physical

Ab initio prediction of two-dimensional Si3C enabling high specific capacity as an anode material for Li/Na/K-ion batteries

Yanning Wang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Bridging the academic and industrial metrics for next-generation practical batteries

Yuliang Cao et al.

NATURE NANOTECHNOLOGY (2019)

添加到收藏夹

Article Chemistry, Physical

Two-Dimensional Carbon-Based Auxetic Materials for Broad-Spectrum Metal-Ion Battery Anodes

Shuaiwei Wang et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2019)

添加到收藏夹

Article Chemistry, Physical

Theoretical Investigation of V3C2 MXene as Prospective High-Capacity Anode Material for Metal-Ion (Li, Na, K, and Ca) Batteries

Ke Fan et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

Excellent Electrolyte Wettability and High Energy Density of B2S as a Two-Dimensional Dirac Anode for Non-Lithium-Ion Batteries

Shufei Lei et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

添加到收藏夹

Article Chemistry, Physical

Phographene as a High-Performance Anode Material with High Specific Capacity and Fast Li Diffusion: From Structural, Electronic, and Mechanical Properties to LIB Applications

Siby Thomas et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2019)

添加到收藏夹

Article Chemistry, Physical

B3S monolayer: prediction of a high-performance anode material for lithium-ion batteries

Saibal Jana et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

添加到收藏夹

Review Chemistry, Multidisciplinary

A review on density functional theory-based study on two-dimensional materials used in batteries

Divya G. Ladha

MATERIALS TODAY CHEMISTRY (2019)

添加到收藏夹

Article Chemistry, Physical

Nitrogenated holey graphene C2N monolayer anodes for lithium- and sodium-ion batteries with high performance

Donghai Wu et al.

ENERGY STORAGE MATERIALS (2019)

添加到收藏夹

Article Chemistry, Physical

Popgraphene: a new 2D planar carbon allotrope composed of 5-8-5 carbon rings for high-performance lithium-ion battery anodes from bottom-up programming

Shuaiwei Wang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2018)

添加到收藏夹

Article Nanoscience & Nanotechnology

A cost and resource analysis of sodium-ion batteries

Christoph Vaalma et al.

NATURE REVIEWS MATERIALS (2018)

添加到收藏夹

Article Nanoscience & Nanotechnology

Carbon Excess C3N: A Potential Candidate as Li-Ion Battery Material

Qin Liu et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

添加到收藏夹

Article Chemistry, Physical

2D Materials for Lithium/Sodium Metal Anodes

Chanyuan Zhang et al.

ADVANCED ENERGY MATERIALS (2018)

添加到收藏夹

Review Chemistry, Physical

On the road toward calcium-based batteries

A. Ponrouch et al.

CURRENT OPINION IN ELECTROCHEMISTRY (2018)

添加到收藏夹

Review Nanoscience & Nanotechnology

Reviving the lithium metal anode for high-energy batteries

Dingchang Lin et al.

NATURE NANOTECHNOLOGY (2017)

添加到收藏夹

Article Multidisciplinary Sciences

Experimental realization of two-dimensional Dirac nodal line fermions in monolayer Cu2Si

Baojie Feng et al.

NATURE COMMUNICATIONS (2017)

添加到收藏夹

Article Chemistry, Physical

The curious case of two dimensional Si2BN: A high-capacity battery anode material

Vivekanand Shukla et al.

NANO ENERGY (2017)

添加到收藏夹

Article Chemistry, Physical

Emerging Opportunities for Two-Dimensional Materials in Lithium-Ion Batteries

Kan-Sheng Chen et al.

ACS ENERGY LETTERS (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Beryllium doped graphene as an efficient anode material for lithium-ion batteries with significantly huge capacity: A DFT study

Saif Ullah et al.

APPLIED MATERIALS TODAY (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

Tuning the Electrochemical Reactivity of Boron- and Nitrogen-Substituted Graphene

Jingjie Wu et al.

ADVANCED MATERIALS (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

Strong anisotropy and magnetostriction in the two-dimensional Stoner ferromagnet Fe3GeTe2

Houlong L. Zhuang et al.

PHYSICAL REVIEW B (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

Single and bilayer bismuthene: Stability at high temperature and mechanical and electronic properties

E. Akturk et al.

PHYSICAL REVIEW B (2016)

添加到收藏夹

Article Chemistry, Multidisciplinary

Two-Dimensional Cu2Si Monolayer with Planar Hexacoordinate Copper and Silicon Bonding

Li-Ming Yang et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2015)

添加到收藏夹

Article Nanoscience & Nanotechnology

First principles phonon calculations in materials science

Atsushi Togo et al.

SCRIPTA MATERIALIA (2015)

添加到收藏夹

Article Nanoscience & Nanotechnology

Ti3C2 MXene as a High Capacity Electrode Material for Metal (Li, Na, K, Ca) Ion Batteries

Dequan Er et al.

ACS APPLIED MATERIALS & INTERFACES (2014)

添加到收藏夹

Article Chemistry, Multidisciplinary

Prediction and Characterization of MXene Nanosheet Anodes for Non-Lithium-Ion Batteries

Yu Xie et al.

ACS NANO (2014)

添加到收藏夹

Article Chemistry, Multidisciplinary

Doped Graphene Sheets As Anode Materials with Superhigh Rate and Large Capacity for Lithium Ion Batteries

Zhong-Shuai Wu et al.

ACS NANO (2011)

添加到收藏夹

Review Multidisciplinary Sciences

Electrical Energy Storage for the Grid: A Battery of Choices

Bruce Dunn et al.

SCIENCE (2011)

添加到收藏夹

Article Chemistry, Physical

A consistent and accurate ab initio parametrization of density functional dispersion correction (DFT-D) for the 94 elements H-Pu

Stefan Grimme et al.

JOURNAL OF CHEMICAL PHYSICS (2010)

添加到收藏夹

Article Chemistry, Physical

Influence of the exchange screening parameter on the performance of screened hybrid functionals

Aliaksandr V. Krukau et al.

JOURNAL OF CHEMICAL PHYSICS (2006)

添加到收藏夹

Article Chemistry, Physical

Improved tangent estimate in the nudged elastic band method for finding minimum energy paths and saddle points

G Henkelman et al.

JOURNAL OF CHEMICAL PHYSICS (2000)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.