4.7 Article

A Diamond/Graphene/Diamond Electrode for Waste Water Treatment

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Review Green & Sustainable Science & Technology

Efficacy of Electrocoagulation Treatment for the Abatement of Heavy Metals: An Overview of Critical Processing Factors, Kinetic Models and Cost Analysis

Saif Ullah Khan et al.

Summary: The electrocoagulation (EC) process is widely used for removing heavy metals and other contaminants by introducing coagulants through electrochemical means. However, its effectiveness depends on the operating conditions and optimizing the process variables is crucial. Key parameters such as current density, electrode type, and electrolysis time significantly influence performance, while mechanisms such as charge neutralization, reduction-oxidation, and precipitation/co-precipitation play a crucial role in pollutant abatement. This review provides a detailed study on the significant parameters, mechanisms, and optimization of the EC process for improving efficiency.

SUSTAINABILITY (2023)

Review Green & Sustainable Science & Technology

Application of Electrocoagulation for the Removal of Transition Metals in Water

Tales Aguiar et al.

Summary: Urban and industrial effluents, stormwater, road runoff, agricultural runoff, urban or mine waste deposits, and fuel storage sites can contaminate water sources with hard-to-biodegrade compounds, such as heavy metals. Electrocoagulation (EC) is a highly efficient technology for the removal of transition metals in water, with a removal rate above 75% for most metals. EC can be combined with other water treatment technologies and is adaptable to the use of renewable energies.

SUSTAINABILITY (2023)

Article Engineering, Environmental

An innovative approach for atrazine electrochemical oxidation modelling: Process parameter effect, intermediate formation and kinetic constant assessment

Pasquale Iovino et al.

Summary: Water reuse for irrigation is a significant global challenge due to water source depletion. This study investigated the removal of atrazine from simulated wastewater using electro-oxidation. The results showed that the presence of oxidizing chlorine species improved atrazine removal and led to the generation of intermediates. The electro-oxidation technique can efficiently treat polluted water, meet water quality recycling needs, and reduce resource consumption.

CHEMICAL ENGINEERING JOURNAL (2023)

Article Engineering, Environmental

Preparation of macro-porous 3D boron-doped diamond electrode with surface micro structure regulation to enhance electrochemical degradation performance

Dongtian Miao et al.

Summary: Boron-doped diamond (BDD) is considered an excellent electrode material, with a specific surface area being a crucial factor in its electrocatalytic performance. A 3D BDD structure, Cu/W/BDD, showed significantly higher electrochemical active surface area compared to a 2D planar structure, resulting in enhanced efficiency in removing tetracycline hydrochloride (TCH) and total organic carbon (TOC). The energy consumption and fluid dynamics of the 3D structure were identified as key factors in its superior degradation performance.

CHEMICAL ENGINEERING JOURNAL (2022)

Article Chemistry, Physical

Graphenization of Diamond

Bin Shen et al.

Summary: The study demonstrates a method of direct catalytic graphenization of diamond, successfully synthesizing homogeneous graphene-diamond heterostructures with covalent bonded interfaces, exhibiting extremely strong interfacial bonding strength.

CHEMISTRY OF MATERIALS (2022)

Article Chemistry, Physical

Synthesis of graphene interlayer diamond films for enhanced electrochemical performance

Xueyu Zhang et al.

Summary: This paper presents a controllable synthesis method for a diamond/graphene/diamond (DGD) sandwich structure, which effectively addresses the issues of high background current and limited electrochemical window in diamond electrodes. The DGD electrode exhibits fast heterogeneous electron transfer and holds great promise in electrochemical applications.

CARBON (2022)

Article Engineering, Chemical

Porous boron-doped diamond for efficient electrocatalytic elimination of azo dye Orange G

Wanlin Yang et al.

Summary: This paper discusses the synthesis and properties of porous boron-doped diamond (BDD) electrodes for electrocatalytic elimination of environmental organic pollutants. The porous BDD electrodes were synthesized using a hot filament chemical vapor deposition (HFCVD) system and their physicochemical properties, electrocatalytic reaction kinetics, and mass transfer were systematically studied. The results show that the porous BDD electrodes have a larger electroactive area, reduced charge transfer resistance, and enhanced mass transfer, leading to significantly higher pollutant removal efficiency.

SEPARATION AND PURIFICATION TECHNOLOGY (2022)

Article Environmental Sciences

Electrochemical degradation of tetracycline hydrochloride in sulfate solutions on boron-doped diamond electrode: The accumulation and transformation of persulfate

Xiaobao Li et al.

Summary: A novel electrifying mode was applied to degrade tetracycline hydrochloride in wastewater. The BDD electrode activated sulfate to remove tetracycline, and the intermittent electrifying mode reduced energy consumption. The results confirmed the economic feasibility of this method in wastewater treatment.

CHEMOSPHERE (2022)

Article Multidisciplinary Sciences

Pollution and risk assessment of heavy metals in rivers in the antimony capital of Xikuangshan

Qing Xie et al.

Summary: The exploitation of Xikuangshan has resulted in serious water pollution and risks, mainly due to the presence of Sb, As, and Hg as the main pollutants, posing a high threat to the ecosystem and human health.

SCIENTIFIC REPORTS (2022)

Article Engineering, Environmental

Prevalence of enteric opportunistic pathogens and extended-spectrum cephalosporin- and carbapenem-resistant coliforms and genes in wastewater from municipal wastewater treatment plants in Croatia

Ana Puljko et al.

Summary: Extended-spectrum beta-lactamase (ESBL) and carbapenemase-producing Enterobacterales are still present in the environment even after conventional treatment in wastewater treatment plants. Enteric opportunistic pathogens such as Klebsiella pneumoniae and Acinetobacter baumannii are efficiently removed, but Escherichia coli and Enterococcus spp. still remain in relatively high concentrations in the effluent. Improvement in wastewater treatment technologies is necessary to minimize the risk of environmental contamination and public health issues related to ESBL and carbapenemase-producing Enterobacterales.

JOURNAL OF HAZARDOUS MATERIALS (2022)

Review Environmental Sciences

A Review on Emerging Pollutants in the Water Environment: Existences, Health Effects and Treatment Processes

Nor Zaiha Arman et al.

Summary: Emerging pollutants (EPs) have become a major global issue due to their potential threats to the environment and human health, originating from pharmaceuticals, personal care products, antibiotics, and hormones. They impact water quality, contaminate drinking water sources, and result in health issues. Various methods, such as physico-chemical, biological, and advanced oxidation processes, are used to remove EPs.
Article Green & Sustainable Science & Technology

Improving degradation of real wastewaters with self-heating magnetic nanocatalysts

Alvaro Gallo-Cordova et al.

Summary: By designing a self-heating catalyst, efficient degradation of organic pollutants in industrial wastewater was achieved, significantly reducing chemical oxygen demand and enhancing wastewater treatment in a more sustainable and efficient way.

JOURNAL OF CLEANER PRODUCTION (2021)

Article Chemistry, Multidisciplinary

Unusual Electrochemical Properties of Low-Doped Boron-Doped Diamond Electrodes Containing sp2 Carbon

Jing Xu et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2020)

Article Chemistry, Analytical

Gold-nanoparticle-decorated boron-doped graphene/BDD electrode for tumor marker sensor

Hongji Li et al.

SENSORS AND ACTUATORS B-CHEMICAL (2020)

Article Chemistry, Analytical

Electrochemical performance of thin free-standing boron-doped diamond nanosheet electrodes

Robert Bogdanowicz et al.

JOURNAL OF ELECTROANALYTICAL CHEMISTRY (2020)

Review Multidisciplinary Sciences

Heavy metal pollution in the environment and their toxicological effects on humans

Jessica Briffa et al.

HELIYON (2020)

Article Chemistry, Physical

Effect of interfacial layer on graphene structure in-situ grown on cemented carbide

Xiang Yu et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

Article Electrochemistry

Electrochemical Behaviour of Boron-doped Diamond Compacts - a New Electrode Material

Yu. V. Pleskov et al.

ELECTROCHIMICA ACTA (2016)

Article Materials Science, Multidisciplinary

Structure and electrochemical characterization of carbon films formed by unbalanced magnetron (UBM) sputtering method

Tomoyuki Kamata et al.

DIAMOND AND RELATED MATERIALS (2014)

Article Engineering, Chemical

Removal of heavy metal ions by nanofiltration

B. A. M. Al-Rashdi et al.

DESALINATION (2013)

Article Electrochemistry

Nickel-ion detection on a boron-doped diamond electrode in acidic media

S. Neodo et al.

ELECTROCHIMICA ACTA (2013)

Article Chemistry, Multidisciplinary

Autonomously Controlled Homogenous Growth of Wafer-Sized High-Quality Graphene via a Smart Janus Substrate

Dongyun Wan et al.

ADVANCED FUNCTIONAL MATERIALS (2012)

Article Electrochemistry

Highly sensitive detection of Cr6+ on boron doped diamond electrodes

Stephane Fierro et al.

ELECTROCHIMICA ACTA (2012)

Article Chemistry, Multidisciplinary

Direct Growth of Bilayer Graphene on SiO2 Substrates by Carbon Diffusion through Nickel

Zhiwei Peng et al.

ACS NANO (2011)