☆ 4.7 Article

Multi-phase FCC-based composite eutectic high entropy alloy with multi-scale microstructure

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2024)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Mechanical

Grain size effects on high cycle fatigue behaviors of pure aluminum

B. B. Wang et al.

Summary: Friction stir processing (FSP) was used to prepare coarse-grained (CG), fine-grained (FG), and ultrafine-grained (UFG) materials to investigate the effect of grain size on high cycle fatigue properties. A linear relationship similar to the Hall-Petch relationship was observed between fatigue strength and grain size. The excellent grain boundaries stability in FSP UFG material inhibited the formation of large-scale shear bands and grain growth, resulting in higher fatigue strength exponent and fatigue damage resistance. Increasing the fraction of high angle grain boundaries can significantly improve the fatigue strength compared to other UFG materials.

INTERNATIONAL JOURNAL OF FATIGUE (2023)

添加到收藏夹

Article Materials Science, Multidisciplinary

Additive manufacturing of ductile refractory high-entropy alloys via phase engineering

Shuyuan Gou et al.

Summary: In this study, ductile refractory high-entropy alloys (RHEAs) were successfully fabricated by laser melting deposition for the first time. The addition of Nb element stabilized the body-centered cubic phase and suppressed the formation of the omega phase, resulting in improved mechanical properties. The TiZrHfNb alloy exhibited high tensile yield strength and ductility at room temperature.

ACTA MATERIALIA (2023)

添加到收藏夹

Article Chemistry, Physical

Designing CoCrFeNi-M (M = Nb, Ta, Zr, and Hf) eutectic high-entropy alloys via a modified simple mixture method

Wenna Jiao et al.

Summary: Recently, a modified simple mixture method was proposed to design eutectic high-entropy alloys (EHEAs) containing more than five elements. Four novel six-element and seven-element EHEAs were designed and prepared, demonstrating the validity and accuracy of this method. The two seven-element EHEAs exhibited peak strengths of 592 and 660 MPa at 1073 K, surpassing most reported EHEAs and even some refractory high-entropy alloys (RHEAs). This study provides a significant paradigm for designing EHEAs with more than five elements.

JOURNAL OF ALLOYS AND COMPOUNDS (2023)

添加到收藏夹

Article Nanoscience & Nanotechnology

Microstructure and properties of a novel cost-effective FeNi-based eutectic high entropy alloys

Dong Fang et al.

Summary: Eutectic high-entropy alloys (EHEAs) have excellent casting properties, high fracture strength, and high tensile ductility. This study investigated the alloying effect of Nb on microstructure and compression properties by fabricating and evaluating a series of [FeNi]75-xCr15Mn10Nbx Co-free high entropy alloys. With the addition of Nb, the microstructure changed from monophase to divorced eutectic to hypoeutectic to almost eutectic, and then transformed into hypereutectic. The compressive fracture strength of the alloys first increased and then decreased with the addition of Nb.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2023)

添加到收藏夹

Article Materials Science, Multidisciplinary

Design of synergistic alloying CoCrFeNi eutectic high entropy alloy based on infinite solid solution

Xicong Ye et al.

Summary: Multivariate synergistic alloying is an effective approach to enhance the overall mechanical properties of metallic materials. Eutectic high-entropy alloys with heterogeneous biphasic layered structures at the micro and nano scale exhibit excellent properties. However, most current studies on CoCrFeNi eutectic high-entropy alloys focus on unitary alloying. In this work, a design strategy based on infinite solid solution synergistic alloying is proposed for CoCrFeNi eutectic high-entropy alloys, leading to the successful design of eutectic high-entropy alloys with fine and regular micro-structures, some of which possess exceptional comprehensive mechanical properties.

MATERIALS LETTERS (2023)

添加到收藏夹

Article Chemistry, Physical

High deformation ability induced by phase transformation through adjusting Cr content in Co-Fe-Ni-Cr high entropy alloys

Xuefeng Gao et al.

Summary: The study revealed significant changes in phase transformation and mechanical properties of high entropy alloys as the chromium content increases. With the increase of chromium content, the volume fractions of HCP and sigma phases increase, leading to an increase in yield strength, but the increase in sigma phase reduces the ductility of the material.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

添加到收藏夹

Article Nanoscience & Nanotechnology

A new method to design eutectic high-entropy alloys by determining the formation of single-phase solid solution and calculating solidification paths

Lei Wang et al.

Summary: Eutectic high entropy alloys (EHEAs) are an important branch of high entropy alloy field due to their excellent mechanical properties and superior castability. This paper proposed a new method to design EHEAs by determining the formation of single-phase solid solution, successfully designing three EHEAs with microstructures composed of eutectic dendrites, and discussing the deformation mechanism of B2 phase compared to BCC phase.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)

添加到收藏夹

Article Chemistry, Physical

Microstructure and mechanical property of novel NiAl-based hypoeutectic/eutectic/hypereutectic high-entropy alloy

Lei Wang et al.

Summary: In this paper, the microstructures and mechanical properties of novel NiAl-MoxCrxVx, NiAl-MoyCryFey, and NiAl-MozCrzVzFez eutectic high-entropy alloy (EHEA) systems were investigated. The results show that the microhardness and yield strength of the EHEAs increased with the increasing content of the high-entropy phase MoCrV/MoCrFe/MoCrVFe.

INTERMETALLICS (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Unique strength-ductility balance of AlCoCrFeNi2.1 eutectic high entropy alloy with ultra-fine duplex microstructure prepared by selective laser melting

Yinuo Guo et al.

Summary: In this study, the selective laser melting (SLM) technique was used to prepare AlCoCrFeNi2.1 EHEA, achieving a good balance between strength and ductility. The SLM-ed samples exhibited a complete eutectic microstructure consisting of ultra-fine FCC and ordered B2 phases. The eutectic morphology transformed from lamellar structure to cellular structure as the laser energy input decreased. The SLM-ed AlCoCrFeNi2.1 EHEA demonstrated excellent mechanical properties, including high tensile strength, yield strength, and good ductility, which can be attributed to the ultra-fine grains and heterogeneous structure.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)

添加到收藏夹

Article Nanoscience & Nanotechnology

Keywords: High entropy alloy Microstructures Mechanical properties Precipitation strengthening

Xicong Ye et al.

Summary: The emergence of eutectic high entropy alloys (EHEAs) has led to the design and preparation of a set of low-cost Co-free Fe55Cr15Ni(30-x)Nbx (x = 0, 3, 6, 9, 12, and 15 at.%) EHEAs in this study. The addition of Nb content affects the solidification structure and mechanical properties of the alloys.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)

添加到收藏夹

Article Nanoscience & Nanotechnology

Multiple minor elements improve strength-ductility synergy of a high-entropy alloy

Shuya Zhu et al.

Summary: This study demonstrates the potential of optimizing the properties of multicomponent high-entropy alloys by introducing multiple minor alloying elements. The alloy decorated with multiple minor elements shows higher yield strength and elongation, attributed to the inhibited dislocation movement and increased stability of the FCC-gamma phase.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)

添加到收藏夹

Article Engineering, Industrial

Alloy development and process innovations for light metals casting

Alan A. Luo et al.

Summary: The combination of light metals and innovative casting processes provides cost-effective technologies for producing lightweight components. This article reviews the development of light alloys and discusses the latest process innovations to overcome defect formation issues. It also summarizes emerging casting processes and advances in casting simulation for further development.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2022)

添加到收藏夹

Article Engineering, Mechanical

Stacking fault induced hardening and grain size effect in nanocrystalline CoNiCrFeMn high-entropy alloy

Renguang Liu et al.

Summary: This paper investigates the interplay between grain boundaries and stacking faults in governing the strength and flow stress of high entropy alloys (HEAs). The results show that stacking faults play an important role in the strengthening of HEAs, and the hardening mechanism induced by stacking faults complements the strong hardening from grain boundaries.

EXTREME MECHANICS LETTERS (2022)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Effect of Mo on microstructure, mechanical and corrosion properties of FeCrNiMnMox high-entropy alloys

Xue-wei Xing et al.

Summary: Four FeCrNiMnMox high-entropy alloys were synthesized and Mo was found to enhance the hardness and yield strength while sacrificing plasticity. XPS and electrochemical analysis showed that Mo improved the corrosion resistance of the alloys in a 0.5 M H2SO4 solution.

CHINA FOUNDRY (2022)

添加到收藏夹

Article Nanoscience & Nanotechnology

Cobalt-element-free eutectic medium-entropy alloys with superior mechanical performance and processability

Ye Lu et al.

Summary: A new composition-design strategy was used to guide the development of Co-free eutectic high-entropy alloy. The study found that the removal of Co decreases the eutectic point and increases the interlaminar spacing and volume of the FCC phase, impacting the mechanical properties.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Tensile deformation behavior and mechanical properties of a bulk cast Al0.9CoFeNi2 eutectic high-entropy alloy

Hui Jiang et al.

Summary: A new Al0.9CoFeNi2 eutectic high entropy alloy with a dual-phase lamellar microstructure exhibited superior strength and ductility. The study revealed the relationship between microstructure and properties, with the FCC (L1(2)) phase easier to deform than the B2 phase.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Another eutectic point of Co-Cr-Fe-Ni-M (Hf, Ta, Nb) high-entropy system determined using a simple mixture method correlated with mixing enthalpy

Tongbin Xie et al.

Summary: This study improves the mechanical properties of eutectic high-entropy alloys by adjusting the eutectic compositions, and successfully determines a new eutectic point. The developed eutectic alloy has different area fractions and widths compared to the reported eutectic, resulting in different compressive mechanical behaviors.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

添加到收藏夹

Article Nuclear Science & Technology

Microstructure formation mechanism and corrosion behavior of FeCrCuTiV two-phase high entropy alloy prepared by different processes

Shaoqiu Xia et al.

Summary: The microstructure and corrosion resistance of FeCrCuTiV high entropy alloy were studied, with results showing that the laser melting deposition process reduces grain size and volume fraction of Cu-rich phase. The higher cooling rate of laser melting deposition contributes to limited grain growth and decreased Cu-rich phase volume fraction. FeCrCuTiV high entropy alloy prepared by laser melting deposition exhibits better corrosion resistance in salt solution electrochemical corrosion test due to reduced Cu-rich phase.

FUSION ENGINEERING AND DESIGN (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Design and development of CoCrFeNiTa eutectic high entropy alloys

Muhammad Mukarram et al.

Summary: High entropy alloys, with the development of eutectic microstructure, can achieve better combination of mechanical properties through fine distribution of phases.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Triple-Phase Eutectic High-Entropy Alloy: Al10Co18Cr18Fe18Nb10Ni26

Xi Jin et al.

Summary: A triple-phase eutectic high-entropy alloy consisting of disordered FCC phase, ordered B2 phase, and HCP Laves phase was successfully designed and prepared by electric arc melting. A simple mixing method can be used to locate the eutectic point composition, providing a new approach for exploring multicomponent triple-phase eutectic alloys with unique microstructure and properties.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2021)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Effects of Homogenized Treatment on Microstructure and Mechanical Properties of AlCoCrFeNi2.2 Near-Eutectic High-Entropy Alloy

Xuan Huang et al.

Summary: The study investigated the effects of homogenized treatment on the microstructure and mechanical properties of AlCoCrFeNi2.2 alloy. Results showed that the hardness of the alloy decreased while the ductility increased after homogenized treatment, making it more suitable for industrial applications.

ACTA METALLURGICA SINICA-ENGLISH LETTERS (2021)

添加到收藏夹

Article Engineering, Mechanical

Analytical modelling of the trans-scale cutting forces in diamond cutting of polycrystalline metals considering material microstructure and size effect

Zhanwen Sun et al.

Summary: This study proposes a trans-scale cutting force model for diamond cutting of polycrystalline metals, taking into account the size effect and microstructure influence on cutting force. By correlating micro-forming theory and crystal plastic theory, a hybrid slip-line model is developed to determine flow stress, with improved estimation accuracy compared to conventional force models. Experimental results demonstrate the model's capability to capture the cutting mechanism transformation phenomenon with increasing size factor.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

A new infinite solid solution strategy to design eutectic high entropy alloys with B2 and BCC structure

Xicong Ye et al.

Summary: A new infinite solid solution strategy was proposed in this study to design EHEAs, resulting in a series of EHEAs with nano-structured precipitated phases. Some of the designed alloys exhibited excellent compressive mechanical properties.

SCRIPTA MATERIALIA (2021)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Relation Between Strength and Hardness of High-Entropy Alloys

Xiaojuan Fan et al.

Summary: High-entropy alloys (HEAs) are alloys composed of multiple principal elements, with promising potentials for developing new compositions and remarkable mechanical properties. The relation between strength and hardness is important for predicting material strength from hardness testing. The study showed that for most HEAs, hardness equals to three times the strength, but for brittle HEAs, the relation may not hold due to early fracture.

ACTA METALLURGICA SINICA-ENGLISH LETTERS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Microstructure evolution and mechanical properties of new die-cast Al-Si-Mg-Mn alloys

Qing Cai et al.

MATERIALS & DESIGN (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

CALPHAD aided eutectic high-entropy alloy design

Mingxu Wu et al.

MATERIALS LETTERS (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Experimental and theoretical study of tracer diffusion in a series of (CoCrFeMn)100-xNix alloys

Josua Kottke et al.

ACTA MATERIALIA (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Lattice-distortion dependent yield strength in high entropy alloys

Li Li et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

The corrosion behaviour of CoCrFeNi-x (x = Cu, Al, Sn) high entropy alloy systems in chloride solution

Piyanut Muangtong et al.

CORROSION SCIENCE (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of molybdenum content on the microstructure and corrosion behavior of FeCoCrNiMox high-entropy alloys

Chunduo Dai et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Hydrogen, as an alloying element, enables a greater strength-ductility balance in an Fe-Cr-Ni-based, stable austenitic stainless steel

Yuhei Ogawa et al.

ACTA MATERIALIA (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Microstructural Stability of As-Cast and Directionally Solidified AlCoCrFeNi2.1Eutectic High-Entropy Alloys at Elevated Temperatures

Lei Wang et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Promising properties and future trend of eutectic high entropy alloys

Yiping Lu et al.

SCRIPTA MATERIALIA (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Evading brittle fracture in submicron-sized high entropy intermetallics in dual-phase eutectic microstructure

Z. Y. Ding et al.

SCRIPTA MATERIALIA (2020)

添加到收藏夹

Article Materials Science, Coatings & Films

Microstructural characterization, mechanical property and corrosion behavior of VNbMoTaWAl refractory high entropy alloy coatings: Effect of Al content

Sameer Kamrudin Bachani et al.

SURFACE & COATINGS TECHNOLOGY (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Enhanced strength and ductility of Al0.9CoCrNi2.1 eutectic high entropy alloy by thermomechanical processing

Xi Jin et al.

MATERIALIA (2020)

添加到收藏夹

Article Chemistry, Physical

Effects of temperature and microstructure on the triblogical properties of CoCrFeNiNbx eutectic high entropy alloys

Yuan Yu et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

Direct solidification of bulk ultrafine-microstructure eutectic high-entropy alloys with outstanding thermal stability

Hui Jiang et al.

SCRIPTA MATERIALIA (2019)

添加到收藏夹

Article Chemistry, Physical

An assessment on the stability of the eutectic phases in high entropy alloys

Barnasree Chanda et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

添加到收藏夹

Article Chemistry, Physical

Phase separation of AlCoCrFeNi2.1 eutectic high-entropy alloy during directional solidification and their effect on tensile properties

Huiting Zheng et al.

INTERMETALLICS (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

A casting eutectic high entropy alloy with superior strength-ductility combination

Qingfeng Wu et al.

MATERIALS LETTERS (2019)

添加到收藏夹

Article Chemistry, Physical

A new CrFeNi2Al eutectic high entropy alloy system with excellent mechanical properties

Xi Jin et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

Microstructures and compressive properties of NiAl-Cr(Mo) and NiAl-Cr eutectic alloys with different Fe contents

Lei Wang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Phase Evolution and Mechanical Properties of Suction Cast Ti-Fe-Co Ternary Alloys

Sumanta Samal et al.

TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Composition design of high entropy alloys using the valence electron concentration to balance strength and ductility

Ruirun Chen et al.

ACTA MATERIALIA (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

A superfine eutectic microstructure and the mechanical properties of CoCrFeNiMox high-entropy alloys

Yong Guo et al.

JOURNAL OF MATERIALS RESEARCH (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effects of Ta addition on the microstructures and mechanical properties of CoCrFeNi high entropy alloy

Hui Jiang et al.

MATERIALS CHEMISTRY AND PHYSICS (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

A novel Fe20Co20Ni41Al19 eutectic high entropy alloy with excellent tensile properties

Xi Jin et al.

MATERIALS LETTERS (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

A new strategy to design eutectic high-entropy alloys using simple mixture method

Hui Jiang et al.

MATERIALS & DESIGN (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

A new pseudo binary strategy to design eutectic high entropy alloys using mixing enthalpy and valence electron concentration

Xi Jin et al.

MATERIALS & DESIGN (2018)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Nano-/Ultrafine Eutectic in CoCrFeNi(Nb/Ta) High-Entropy Alloys

Barnasree Chanda et al.

TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Composition Dependence on the Evolution of Nanoeutectic in CoCrFeNiNbx (0.45 ≤ x ≤ 0.65) High Entropy Alloys

Barnasree Chanda et al.

ADVANCED ENGINEERING MATERIALS (2018)

添加到收藏夹

Article Chemistry, Physical

A new strategy to design eutectic high-entropy alloys using mixing enthalpy

Yiping Lu et al.

INTERMETALLICS (2017)

添加到收藏夹

Article Chemistry, Physical

Cold-rolling and recrystallization textures of a nano-lamellar AlCoCrFeNi2.1 eutectic high entropy alloy

I. S. Wani et al.

INTERMETALLICS (2017)

添加到收藏夹

Article Chemistry, Physical

In the quest of single phase multi-component multiprincipal high entropy alloys

Tazuddin et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of Niobium on Microstructure and Properties of the CoCrFeNbxNi High Entropy Alloys

Hui Jiang et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2017)

添加到收藏夹

Article Nanoscience & Nanotechnology

Laves phase intermetallic matrix composite in situ toughened by ductile precipitates

Alexander J. Knowles et al.

SCRIPTA MATERIALIA (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Combustion synthesis in the Ni-Al-Nb ternary system: A Time-Resolved X-ray Diffraction study

Alexander E. Sytschev et al.

RESULTS IN PHYSICS (2017)

添加到收藏夹

Review Materials Science, Multidisciplinary

A critical review of high entropy alloys and related concepts

D. B. Miracle et al.

ACTA MATERIALIA (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Microstructural origins of high strength and high ductility in an AlCoCrFeNi2.1 eutectic high-entropy alloy

Xuzhou Gao et al.

ACTA MATERIALIA (2017)

添加到收藏夹

Review Materials Science, Multidisciplinary

Thermodynamics of concentrated solid solution alloys

M. C. Gao et al.

CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Influence of growth velocity variations on the pattern formation during the directional solidification of ternary eutectic Al-Ag-Cu

Johannes Hoetzer et al.

ACTA MATERIALIA (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

A precipitation-hardened high-entropy alloy with outstanding tensile properties

J. Y. He et al.

ACTA MATERIALIA (2016)

添加到收藏夹

Article Chemistry, Physical

Designing eutectic high entropy alloys of CoCrFeNiNbX

Feng He et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

Enhanced mechanical properties of NbCr2 Laves phase by spark plasma sintering

K. W. Li et al.

VACUUM (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

Understanding the relationship between microstructure and mechanical properties of Al-Cu-Si ultrafine eutectic composites

Jeong Tae Kim et al.

MATERIALS & DESIGN (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

Stability of lamellar structures in CoCrFeNiNbx eutectic high entropy alloys at elevated temperatures

Feng He et al.

MATERIALS & DESIGN (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

Understanding phase stability of Al-Co-Cr-Fe-Ni high entropy alloys

Chuan Zhang et al.

MATERIALS & DESIGN (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

Modelling solid solution hardening in high entropy alloys

Isaac Toda-Caraballo et al.

ACTA MATERIALIA (2015)

添加到收藏夹

Review Chemistry, Physical

An assessment on the future development of high-entropy alloys: Summary from a recent workshop

Z. P. Lu et al.

INTERMETALLICS (2015)

添加到收藏夹

Article Nanoscience & Nanotechnology

Effects of AL addition on microstructure and mechanical properties of AlxCoCrFeNi High-entropy alloy

Tengfei Yang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

Tensile properties of the Cr-Fe-Ni-Mn non-equiatomic multicomponent alloys with different Cr contents

N. D. Stepanov et al.

MATERIALS & DESIGN (2015)

添加到收藏夹

Article Thermodynamics

An understanding of high entropy alloys from phase diagram calculations

F. Zhang et al.

CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY (2014)

添加到收藏夹

Article Physics, Multidisciplinary

Exploration and Development of High Entropy Alloys for Structural Applications

Daniel B. Miracle et al.

ENTROPY (2014)

添加到收藏夹

Article Chemistry, Physical

Microstructure and texture evolution during annealing of equiatomic CoCrFeMnNi high-entropy alloy

P. P. Bhattacharjee et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2014)

添加到收藏夹

Article Multidisciplinary Sciences

A fracture-resistant high-entropy alloy for cryogenic applications

Bernd Gludovatz et al.

SCIENCE (2014)

添加到收藏夹

Article Nanoscience & Nanotechnology

Development of alloys with high strength at elevated temperatures by tuning the bimodal microstructure in the Al-Cu-Ni eutectic system

C. S. Tiwary et al.

SCRIPTA MATERIALIA (2014)

添加到收藏夹

Article Multidisciplinary Sciences

A Promising New Class of High-Temperature Alloys: Eutectic High-Entropy Alloys

Yiping Lu et al.

SCIENTIFIC REPORTS (2014)

添加到收藏夹

News Item Chemistry, Physical

NANOSTRUCTURED ALLOYS Large tensile elongation

Ruslan Z. Valiev

NATURE MATERIALS (2013)

添加到收藏夹

Article Chemistry, Physical

Effects of Al addition on the microstructure and mechanical property of AlxCoCrFeNi high-entropy alloys

Woei-Ren Wang et al.

INTERMETALLICS (2012)

添加到收藏夹

Article Materials Science, Multidisciplinary

Microstructure and elevated temperature properties of a refractory TaNbHfZrTi alloy

O. N. Senkov et al.

JOURNAL OF MATERIALS SCIENCE (2012)

添加到收藏夹

Article Nanoscience & Nanotechnology

Microstructures and mechanical properties of multiprincipal component CoCrFeNiTix alloys

Tao-Tsung Shun et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)

添加到收藏夹

Article Chemistry, Physical

Effect of withdrawal rate on microstructure and mechanical properties of a directionally solidified NiAl-based hypoeutectic alloy doped with trace Hf and Ho

J. T. Guo et al.

INTERMETALLICS (2011)

添加到收藏夹

Article Chemistry, Physical

Evolution of microstructure, hardness, and corrosion properties of high-entropy Al0.5CoCrFeNi alloy

Chun-Ming Lin et al.

INTERMETALLICS (2011)

添加到收藏夹

Article Physics, Applied

Propagation of shear bands and accommodation of shear strain in the Fe56Nb4Al40 ultrafine eutectic-dendrite composite

Jin Man Park et al.

APPLIED PHYSICS LETTERS (2008)

添加到收藏夹

Article Physics, Applied

Formation of a bimodal eutectic structure in Ti-Fe-Sn alloys with enhanced plasticity

J. H. Han et al.

APPLIED PHYSICS LETTERS (2008)

添加到收藏夹

Article Nanoscience & Nanotechnology

Nanoscale mechanism and intrinsic structure related deformation of Ti-alloys

J. Eckert et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)

添加到收藏夹

Article Materials Science, Multidisciplinary

Classification of bulk metallic glasses by atomic size difference, heat of mixing and period of constituent elements and its application to characterization of the main alloying element

A Takeuchi et al.

MATERIALS TRANSACTIONS (2005)

添加到收藏夹

Article Crystallography

Growth and characterization of the NiAl-NiAlNb eutectic structure

P. L. Ferrandini et al.

JOURNAL OF CRYSTAL GROWTH (2005)

添加到收藏夹

Article Nanoscience & Nanotechnology

Microstructural development in equiatomic multicomponent alloys

B Cantor et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)

添加到收藏夹

Article Materials Science, Multidisciplinary

Nanostructured high-entropy alloys with multiple principal elements: Novel alloy design concepts and outcomes

JW Yeh et al.

ADVANCED ENGINEERING MATERIALS (2004)

添加到收藏夹

Article Chemistry, Physical

The effect of microstructure on hardness measurements in the aluminium-rich corner of the Al-Ni-Cr system

DN Compton et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2001)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.