☆ 4.7 Article

Titanium boride coating by high power diode laser alloying of amorphous boron with titanium and its surface property investigations

OPTICS AND LASER TECHNOLOGY (2024)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Materials Science, Multidisciplinary

Microstructure and wear properties of powder-pack borided Ti-5Al-2.5Sn alloy

Ying Wu et al.

Summary: The boride layer was formed on the surface of Ti-5Al-2.5Sn alloy through powder-pack boriding at temperatures ranging from 975 to 1075°C with a 25°C interval for 20 hours. The study investigated the surface morphology, phase composition, microstructure, hardness, and wear properties of the borided Ti-5Al-2.5Sn alloy. The results showed that the boride layer consisted of an outer TiB2 layer and an inner TiB whisker, with the thickness of the TiB2 layer increasing and the TiB whiskers coarsening as the temperature increased. The hardness of the TiB2 layer was found to be related to the boriding temperature, with higher temperatures resulting in greater hardness, in agreement with the theoretical predictions. The Ti-5Al-2.5Sn alloy borided at 1075°C for 20 hours exhibited the highest hardness and excellent wear resistance. The wear mechanisms were discussed to be a combination of abrasive and adhesive wear.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2023)

添加到收藏夹

Article Materials Science, Coatings & Films

Mechanical and tribological behaviour of titanium boride coatings processed by thermochemicals treatments

Mohammed Amine Khater et al.

Summary: This study aimed to investigate the mechanical and tribological properties of the titanium boride layer processed by a thermochemical boriding treatment. The formation, thickness, and hardness of the TiB2 layer were analyzed at different temperatures, along with nanoindentation tests for nanomechanical characterization. The influence of this treatment on the coefficient of friction and wear rate in a simulated body fluid environment was also studied.

SURFACE ENGINEERING (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Study on Wear Resistance of Ti-6Al-4V Alloy Composite Coating Prepared by Laser Alloying

Quan Chen et al.

Summary: This study improved the wear performance of titanium alloy under high temperature conditions through alloy coatings, but there is still room for improvement in high temperature wear resistance.

APPLIED SCIENCES-BASEL (2021)

添加到收藏夹

Article Materials Science, Ceramics

Tribological characteristics of the dual titanium boride layers (TiB2+TiB) on titanium alloy

Yan Song Zhu et al.

Summary: The study shows that using rare earth additions in solid-state boriding of titanium alloy can improve tribological properties, and smaller TiB whiskers result in better tribological performance. Developing compression and wear models can quantitatively estimate the impact of TiB whisker size on tribological properties.

CERAMICS INTERNATIONAL (2021)

添加到收藏夹

Review Optics

Recent trends in laser cladding and surface alloying

Anas Ahmad Siddiqui et al.

Summary: Laser cladding and surface alloying techniques are employed to improve surface properties of materials, with proper selection of input parameters significantly enhancing their performance. Research in this area has attracted extensive interest due to the development of high power lasers and improved control mechanisms.

OPTICS AND LASER TECHNOLOGY (2021)

添加到收藏夹

Editorial Material Materials Science, Multidisciplinary

Special Issue Surface Modification of Metals and Alloys

Oriol Rius-Ayra et al.

COATINGS (2021)

添加到收藏夹

Article Optics

High power diode laser alloying of TiB2 and amorphous-boron with titanium: Phase, microstructure and hardness analyses

K. Monisha et al.

Summary: Laser alloying was used to create a hard coating with improved surface properties, incorporating TiB2 and amorphous boron layers onto Cp-Ti and Ti6Al4V substrates. Various analytical techniques were employed to analyze the coating, showing the presence of TiB2, TiB, Ti4N3B2 phases, and confirming the high hardness of the coating.

OPTIK (2021)

添加到收藏夹

Review Chemistry, Physical

SHS-Derived Powders by Reactions' Coupling as Primary Products for Subsequent Consolidation

Sofiya Aydinyan et al.

Summary: This study investigates the use of self-propagating high-temperature synthesis (SHS) for the production of composites in powder metallurgy techniques. The effects of SHS synthesis and sintering on the Me'O-3(WO3,MoO3)-Me''O(CuO,NiO)-Mg-C, Ti-B-Al12Mg17 systems are compared in detail. It is shown that by optimizing the structure and parameters of SHS powders and controlling the thermodynamic requirements during combustion, the sintering efficiency of materials can be significantly improved.

MATERIALS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Improvement of Mechanical, Tribological, and Fricative Reduction Properties of Pure Titanium by Boriding

Tong Chen et al.

Summary: Surface boriding of pure titanium was conducted using dissolved salt impregnation to enhance surface hardness and wear resistance. The boriding temperature significantly affected the microstructure, mechanical properties, and tribological behavior of the borided samples, with 1050 degrees C considered optimal for achieving high surface hardness and low friction values.

APPLIED SCIENCES-BASEL (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Evolution of amorphous boron transformed into crystal nanospheres under electron beam irradiation

Wentao Yuan et al.

RESULTS IN PHYSICS (2020)

添加到收藏夹

Article Materials Science, Ceramics

Characteristics, wear and corrosion properties of borided pure titanium by pack boriding near α → β phase transition temperature

Yonghua Duan et al.

CERAMICS INTERNATIONAL (2020)

添加到收藏夹

Review Materials Science, Multidisciplinary

Electron-Beam Surface Treatment of Metals and Alloys: Techniques and Trends

Stefan Valkov et al.

METALS (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Fabrication and wear behavior of TiC reinforced FeCoCrAlCu-based high entropy alloy coatings by laser surface alloying

P. F. Jiang et al.

MATERIALS CHEMISTRY AND PHYSICS (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Influence of boron nitride on reinforcement to improve high temperature oxidation resistance of titanium

Jose D. Avila et al.

JOURNAL OF MATERIALS RESEARCH (2019)

添加到收藏夹

Review Materials Science, Multidisciplinary

Laser-Sustained Plasma (LSP) Nitriding of Titanium: A Review

Amar M. Kamat et al.

COATINGS (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of TiB2 content on microstructure and properties of in situ Ti-TiB composites

Harshpreet Singh et al.

INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS (2019)

添加到收藏夹

Article Engineering, Multidisciplinary

Effect of TiB2 addition on the elevated temperature tribological behavior of spark plasma sintered Ti matrix composite

Abbas Sabahi Namini et al.

COMPOSITES PART B-ENGINEERING (2019)

添加到收藏夹

Article Automation & Control Systems

Laser pulse alloying the surface of Ti-5.5Al-2Zr-1Mo-1V by boron carbide particles

A. Gorunov

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)

添加到收藏夹

Article Chemistry, Physical

Laser Alloying Monel 400 with Amorphous Boron to Obtain Hard Coatings

Mateusz Kuklinski et al.

MATERIALS (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Characterization of Different Surface Layers Produced by Solid Boron-Nitro-Carburizing Thermochemical Treatment on AISI 1020

Alexandre Galiotto et al.

MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Production of Mo2NiB2 Based Hard Alloys by Self-Propagating High-Temperature Synthesis

Sevinch Rahimi Moghaddam et al.

HIGH TEMPERATURE MATERIALS AND PROCESSES (2019)

添加到收藏夹

Review Engineering, Biomedical

Surface modification of biomaterials and biomedical devices using additive manufacturing

Susmita Bose et al.

ACTA BIOMATERIALIA (2018)

添加到收藏夹

Article Materials Science, Ceramics

Surface characterization and diffusion model of pack bonded TB2 titanium alloy

Ping Li et al.

CERAMICS INTERNATIONAL (2018)

添加到收藏夹

Article Chemistry, Physical

Laser beam welding of a CoCrFeNiMn-type high entropy alloy produced by self-propagating high-temperature synthesis

Nikolai Kashaev et al.

INTERMETALLICS (2018)

添加到收藏夹

Review Optics

Laser surface alloying on aluminum and its alloys: A review

Yiming Chi et al.

OPTICS AND LASERS IN ENGINEERING (2018)

添加到收藏夹

Article Chemistry, Physical

An Investigation of the Influence of Initial Roughness on the Friction and Wear Behavior of Ground Surfaces

Guoxing Liang et al.

MATERIALS (2018)

添加到收藏夹

Article Automation & Control Systems

Microstructure and selected properties of Monel 400 alloy after laser heat treatment and laser boriding using diode laser

Mateusz Kuklinski et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)

添加到收藏夹

Article Materials Science, Coatings & Films

Growth kinetics and mechanical characterization of boride layers formed on β-type Ti-45Nb alloy

Gokhan Kara et al.

SURFACE & COATINGS TECHNOLOGY (2018)

添加到收藏夹

Article Engineering, Multidisciplinary

Mechanical, corrosion and wear characteristics of powder metallurgy processed Ti-6Al-4V/B4C metal matrix composites

K. Soorya Prakash et al.

AIN SHAMS ENGINEERING JOURNAL (2018)

添加到收藏夹

Review Engineering, Multidisciplinary

Metallic Glasses as Potential Reinforcements in Al and Mg Matrices: A Review

S. Jayalakshmi et al.

TECHNOLOGIES (2018)

添加到收藏夹

Article Chemistry, Physical

Sequence of phase evolution during mechanically induced self-propagating reaction synthesis of TiB and TiB2 via magnetically controlled ball milling of titanium and boron powders

J. E. Oghenevweta et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Microstructure, Growth Kinetics and Some Mechanical Properties of Boride Layers Produced on Pure Titanium by Molten-Salt Boriding

L. S. Ma et al.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Growth kinetics and some mechanical properties of two-phase boride layers produced on commercially pure titanium during plasma paste boriding

N. Makuch et al.

THIN SOLID FILMS (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Wear resistance enhancement of titanium alloy (Ti-6A1-4V) by ball burnishing process

Goutam Devaraya Revankar et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2017)

添加到收藏夹

Article Chemistry, Physical

Characterization and diffusion model for the titanium boride layers formed on the Ti6Al4V alloy by plasma paste boriding

Mourad Keddam et al.

APPLIED SURFACE SCIENCE (2017)

添加到收藏夹

Review Materials Science, Multidisciplinary

Selective Laser Melting of Titanium Alloys and Titanium Matrix Composites for Biomedical Applications: A Review

Lai-Chang Zhang et al.

ADVANCED ENGINEERING MATERIALS (2016)

添加到收藏夹

Article Materials Science, Coatings & Films

Wear resistance improvement of austenitic 316L steel by laser alloying with boron

M. Kulka et al.

SURFACE & COATINGS TECHNOLOGY (2016)

添加到收藏夹

Article Materials Science, Coatings & Films

A diffusion model for the titanium borides on pure titanium

M. Keddam et al.

SURFACE ENGINEERING (2016)

添加到收藏夹

Article Materials Science, Coatings & Films

Characteristics and growth kinetics of plasma paste borided Cp-Ti and Ti6Al4V alloy

Volkan Ataibis et al.

SURFACE & COATINGS TECHNOLOGY (2015)

添加到收藏夹

Article Thermodynamics

Ignition, combustion, and oxidation of mixtures of amorphous and crystalline boron powders

W. Ao et al.

COMBUSTION EXPLOSION AND SHOCK WAVES (2014)

添加到收藏夹

Article Optics

Microstructure and properties of laser-borided composite layers formed on commercially pure titanium

M. Kulka et al.

OPTICS AND LASER TECHNOLOGY (2014)

添加到收藏夹

Article Optics

Laser surface alloying of commercially pure titanium with boron and carbon

N. Makuch et al.

OPTICS AND LASERS IN ENGINEERING (2014)

添加到收藏夹

Article Chemistry, Physical

Microstructure and properties of laser-borided Inconel 600-alloy

M. Kulka et al.

APPLIED SURFACE SCIENCE (2013)

添加到收藏夹

Article Optics

Microstructure and properties of laser-borided 41Cr4 steel

M. Kulka et al.

OPTICS AND LASER TECHNOLOGY (2013)

添加到收藏夹

Article Materials Science, Coatings & Films

Growth kinetics of titanium borides produced by CRTD-Bor method

G. Kartal et al.

SURFACE & COATINGS TECHNOLOGY (2013)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Effects of trace TiB2 on microstructure in cast titanium alloys

L. G. Huang et al.

INTERNATIONAL JOURNAL OF CAST METALS RESEARCH (2012)

添加到收藏夹

Article Materials Science, Ceramics

Microstructure of Face Centered Cubic (fcc) TiB Powder Synthesized by Boronizing of Ti Powder

Jiandong Hu et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2012)

添加到收藏夹

Article Materials Science, Multidisciplinary

Characterisation of titanium-titanium boride composites processed by powder metallurgy techniques

M. Selva Kumar et al.

MATERIALS CHARACTERIZATION (2012)

添加到收藏夹

Article Chemistry, Physical

Microstructure and friction and wear behavior of laser boronizing composite coatings on titanium substrate

Chun Guo et al.

APPLIED SURFACE SCIENCE (2011)

添加到收藏夹

Article Chemistry, Physical

Synthesis of nanocomposites by mechanical alloying

C. Suryanarayana

JOURNAL OF ALLOYS AND COMPOUNDS (2011)

添加到收藏夹

Proceedings Paper Engineering, Multidisciplinary

Boride Coatings Structure and Properties, Produced by Atmospheric Electron-Beam Cladding

Alexandr Teplykh et al.

APPLICATIONS OF ENGINEERING MATERIALS, PTS 1-4 (2011)

添加到收藏夹

Article Materials Science, Coatings & Films

Electrochemical bonding of titanium for improved mechanical properties

G. Kartal et al.

SURFACE & COATINGS TECHNOLOGY (2010)

添加到收藏夹

Article Materials Science, Coatings & Films

Effect of h-BN addition on the properties of nanostructured Al2O3-TiB2-TiN based coatings developed by combined SHS and laser surface alloying

Satyajit Chatterjee et al.

SURFACE & COATINGS TECHNOLOGY (2010)

添加到收藏夹

Article Engineering, Industrial

Study on the microstructures and properties of the boride layers laser fabricated on Ti-6Al-4V alloy

Y. S. Tian et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2009)

添加到收藏夹

Review Materials Science, Composites

Processing-structure-property aspects of particulate- and whisker-reinforced titanium matrix composites

S. C. Tjong et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2008)

添加到收藏夹

Article Chemistry, Multidisciplinary

Analysis of the growth morphology of TiB and the microstructure refinement of the coatings fabricated on Ti-6Al-4V by laser boronizing

Y. S. Tian et al.

CRYSTAL GROWTH & DESIGN (2008)

添加到收藏夹

Article Materials Science, Multidisciplinary

Kinetics of borided 31CrMoV9 and 34CrAlNi7 steels

Gooezde Celebi Efe et al.

MATERIALS CHARACTERIZATION (2008)

添加到收藏夹

Article Materials Science, Multidisciplinary

Growth of boride layers on the 13% Cr steel surface in a mixture of amorphous boron and KBF4

V. I. Dybkov

JOURNAL OF MATERIALS SCIENCE (2007)

添加到收藏夹

Article Nanoscience & Nanotechnology

Influence of (Zr,C) content on microstructure and properties of Zr55Al10Ni5CU30 alloy prepared by laser-induced self-propagating reaction synthesis

C. S. Wang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2007)

添加到收藏夹

Article Engineering, Electrical & Electronic

Surface modification of ferrous alloys with boron

RS Petrova et al.

JOURNAL OF ELECTRONIC MATERIALS (2005)

添加到收藏夹

Article Materials Science, Coatings & Films

Plasma-assisted boriding of pure titanium and TiAl6V4

P Kaestner et al.

SURFACE & COATINGS TECHNOLOGY (2001)

添加到收藏夹

Article Materials Science, Multidisciplinary

Boriding of titanium alloys in a fluidized bed reactor

KG Anthymidis et al.

JOURNAL OF MATERIALS SCIENCE LETTERS (2001)

添加到收藏夹

Article Chemistry, Inorganic & Nuclear

Production of α-rhombohedral boron by amorphous boron crystallization

SO Shalamberidze et al.

JOURNAL OF SOLID STATE CHEMISTRY (2000)

添加到收藏夹

Article Materials Science, Multidisciplinary

Titanium borides prepared by self-propagating high-temperature synthesis

OK Lepakova et al.

INORGANIC MATERIALS (2000)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.