☆ 4.7 Article

Insight into structural degradation of NCMs under extreme fast charging process

RARE METALS (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Review Materials Science, Multidisciplinary

Electrolyte perspective on stabilizing LiNi0.8Co0.1Mn0.1O2 cathode for lithium-ion batteries

Xiao-Feng Zhu et al.

Summary: This review introduces the research progress on electrolyte modifications for LIBs with NCM811 cathode materials and discusses how they control the interface stability. Recommendations for further improvement of electrolyte stability and NCM811 electrochemical properties are summarized, proposing new design rules for high performance NCM811 cathode-based LIBs.

RARE METALS (2023)

添加到收藏夹

Article Chemistry, Physical

Understanding the Role of Commercial Separators and Their Reactivity toward LiPF6 on the Failure Mechanism of High-Voltage NCM523 || Graphite Lithium Ion Cells

Sven Klein et al.

Summary: The structure of separators has a significant impact on the high-voltage performance of NCM523 || graphite cells, with fiber-structured separators being effective in preventing rollover failure, and ceramic-coated separators showing improved cycle life through different reactivities toward LiPF6.

ADVANCED ENERGY MATERIALS (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Modulating precursor nanosheets for stabilized Ni-rich cathode material for Li-ion batteries

He-Kang Zhu et al.

RARE METALS (2022)

添加到收藏夹

Article Chemistry, Physical

A Comprehensive Understanding of the Aging Effects of Extreme Fast Charging on High Ni NMC Cathode

Tanvir R. Tanim et al.

Summary: This study investigates the degradation mechanisms of NMC811 under extreme fast charging conditions and compares its performance with NMC532. The results show that NMC811 experiences more severe subsurface crystallographic degradation compared to NMC532, but still maintains superior performance due to its radially oriented grains and improved transport properties.

ADVANCED ENERGY MATERIALS (2022)

添加到收藏夹

Article Multidisciplinary Sciences

Compositionally complex doping for zero-strain zero-cobalt layered cathodes

Rui Zhang et al.

Summary: By using a new compositionally complex doping strategy, researchers have successfully fabricated a high-Ni, zero-Co layered cathode with extremely high thermal and cycling stability. The cathode exhibits nearly zero volumetric change, greatly reducing lattice defects and local strain-induced cracks. This study is of great significance for addressing the safety and stability concerns of high-Ni, zero-Co cathode materials.

NATURE (2022)

添加到收藏夹

Article Chemistry, Physical

Spreading monoclinic boundary network between hexagonal primary grains for high performance Ni-rich cathode materials

Xing Xu et al.

Summary: Knowledge of structure-performance relationship is crucial in material design. In this study, we improved the performance of a Ni-rich cathode material by building monoclinic surfaces and engineering octahedral ligand field. Our approach shows potential for widespread battery research.

NANO ENERGY (2022)

添加到收藏夹

Article Energy & Fuels

Introducing high-valence elements into cobalt-free layered cathodes for practical lithium-ion batteries

Geon-Tae Park et al.

Summary: Eliminating cobalt from nickel-rich layered cathodes is crucial for reducing material cost and promoting sustainable development of Li-ion batteries. By adding 1 mol% molybdenum, the Li(Ni0.89Mn0.1Mo0.01)O-2 cathode exhibits improved performance in terms of capacity and cycling stability, thanks to grain size refinement and enhanced cation ordering.

NATURE ENERGY (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Electrochemical characterization of AlPO4 coated LiNi1/3Co1/3Mn1/3O2 cathode materials for high temperature lithium battery application

Jian-Hua Wang et al.

Summary: Aluminum phosphate coating affects the surface structure and electrochemical properties of NCM cathode material, blocking Li+ insertion-extraction process and increasing surface film resistance, while aiding in stabilizing the solid electrolyte interface film and cell resistance.

RARE METALS (2021)

添加到收藏夹

Article Energy & Fuels

Feasible synthesis of NCM811 cathodes with controllable Li/Ni cationic mixing for enhanced electrochemical performance via a nano grinding assisted solid-state approach

Huihui He et al.

Summary: This study reports a feasible approach to enhance the lattice ordering and improve the electrochemical performance of LiNi0.8Co0.1Mn0.1O2 (NCM811) layered cathode materials through nano grinding assisted solid-state reaction. The results showed that using oxide raw materials as the starting material can provide layered cathode materials with controllable Li/Ni disordering, leading to improved electrochemical behavior. The enhanced kinetic process with low interfacial resistance and fast Li diffusion contributed to the improved rate performance.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2021)

添加到收藏夹

Article Chemistry, Physical

On the Beneficial Impact of Li2CO3 as Electrolyte Additive in NCM523 ∥ Graphite Lithium Ion Cells Under High-Voltage Conditions

Sven Klein et al.

Summary: The addition of Li2CO3 to the electrolyte can prevent capacity decay in batteries at high temperatures, improving the cycling performance and preventing TM deposition and Li metal formation on graphite.

ADVANCED ENERGY MATERIALS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Spontaneous Strain Buffer Enables Superior Cycling Stability in Single-Crystal Nickel-Rich NCM Cathode

He Zhu et al.

Summary: A highly stable single-crystal LiNi0.83Co0.12Mn0.05O2 cathode material with high specific capacity and excellent cycling stability has been reported, with structural changes driven by unique Li-intercalation kinetics in single crystals to reduce cracks and ensure high cycling stability.

NANO LETTERS (2021)

添加到收藏夹

Article Chemistry, Physical

Extended cycle life implications of fast charging for lithium-ion battery cathode

Tanvir R. Tanim et al.

Summary: The study found that while cathode issues are minimal in early cycling of extreme fast charging, they begin to accelerate in later life with distinct cracking identified as a fatigue mechanism. The bulk structure of cathodes remains intact, but there is particle surface reconstruction observed, which has a less pronounced effect on cathode aging compared to cracking.

ENERGY STORAGE MATERIALS (2021)

添加到收藏夹

Article Chemistry, Physical

Using In Situ High-Energy X-ray Diffraction to Quantify Electrode Behavior of Li-Ion Batteries from Extreme Fast Charging

Partha P. Paul et al.

Summary: This study introduces a methodology for quantitatively mapping the degradation of Li-ion batteries during extreme fast charging using high-energy X-ray diffraction. By analyzing the spatial correlation between plated Li on the graphite anode and its structural properties, the battery cell capacity loss is studied. The results show that Li plating on the graphite anode occurs heterogeneously and is correlated to the extent of anode lithiation.

ACS APPLIED ENERGY MATERIALS (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Insight into the capacity decay mechanism of cycled LiNi0.5Co0.2Mn0.3O2 cathodes via in situ x-ray diffraction

Yalan Huang et al.

Summary: Layered LiNi x Co y Mn1-x-y O2 (NCM) is expected to be the dominant cathode technology in the automotive industry. However, the severe capacity decay of NCM cathodes has hindered further success. In this study, in situ high-energy synchrotron x-ray diffraction (XRD) measurements were conducted on cycled NCM523 cathodes, providing key evidence for a mechanically induced capacity decay mechanism.

NANOTECHNOLOGY (2021)

添加到收藏夹

Article Chemistry, Physical

Polycrystalline and Single Crystalline NCM Cathode Materials-Quantifying Particle Cracking, Active Surface Area, and Lithium Diffusion

Enrico Trevisanello et al.

Summary: The NCM family of cathode active materials with high nickel content is becoming the preferred choice for high performance lithium-ion batteries. Study shows that cracking of polycrystalline particles of NCM is not only detrimental, but also helps achieve higher reversible capacities and rate capability. Optimization of CAM size and morphology is crucial for achieving good rate capability with high-nickel NCMs.

ADVANCED ENERGY MATERIALS (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Role of Residual Li and Oxygen Vacancies in Ni-rich Cathode Materials

Lingjun Li et al.

Summary: By adjusting the oxygen flow during high-temperature sintering, the content of residual Li and oxygen vacancies in Ni-rich cathode materials can be controlled, which in turn influences the electrochemical performance of the batteries.

ACS APPLIED MATERIALS & INTERFACES (2021)

添加到收藏夹

Article Chemistry, Physical

Fast-Charging Aging Considerations: Incorporation and Alignment of Cell Design and Material Degradation Pathways

Parameswara R. Chinnam et al.

Summary: Fast charging of electric vehicle batteries is crucial for increasing adoption rates, but is limited by battery aging. Research has shown that even slight variations in battery design and charging protocols can have significant impacts on battery aging, with as little as 2% change in porosity affecting aging pathways.

ACS APPLIED ENERGY MATERIALS (2021)

添加到收藏夹

Article Electrochemistry

Unveiling Capacity Degradation Mechanism of Li-ion Battery in Fast-charging Process

Sheng S. Zhang

CHEMELECTROCHEM (2020)

添加到收藏夹

Article Chemistry, Physical

Crack-free single-crystalline Ni-rich layered NCM cathode enable superior cycling performance of lithium-ion batteries

Xinming Fan et al.

NANO ENERGY (2020)

添加到收藏夹

Article Engineering, Environmental

Unravelling the influence of quasi single-crystalline architecture on high-voltage and thermal stability of LiNi0.5Co0.2Mn0.3O2 cathode for lithium-ion batteries

Xinming Fan et al.

CHEMICAL ENGINEERING JOURNAL (2020)

添加到收藏夹

Article Chemistry, Physical

Revealing Mechanism of Li3PO4 Coating Suppressed Surface Oxygen Release for Commercial Ni-Rich Layered Cathodes

Qingmeng Gan et al.

ACS APPLIED ENERGY MATERIALS (2020)

添加到收藏夹

Article Electrochemistry

Fast Charge-Driven Li Plating on Anode and Structural Degradation of Cathode

Seoung-Bum Son et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2020)

添加到收藏夹

Article Chemistry, Physical

Suppressing H2-H3 phase transition in high Ni-low Co layered oxide cathode material by dual modification

Sidra Jamil et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

添加到收藏夹

Article Chemistry, Physical

Correlation between long range and local structural changes in Ni-rich layered materials during charge and discharge process

Shiyao Zheng et al.

JOURNAL OF POWER SOURCES (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Collapse of LiNi1-x-yCoxMnyO2 Lattice at Deep Charge Irrespective of Nickel Content in Lithium-Ion Batteries

Wangda Li et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2019)

添加到收藏夹

Review Energy & Fuels

Challenges and opportunities towards fast-charging battery materials

Yayuan Liu et al.

NATURE ENERGY (2019)

添加到收藏夹

Review Chemistry, Physical

Controllable Cathode-Electrolyte Interface of Li[Ni0.8Co0.1Mn0.1]O2 for Lithium Ion Batteries: A Review

Hirbod Maleki Kheimeh Sari et al.

ADVANCED ENERGY MATERIALS (2019)

添加到收藏夹

Review Chemistry, Multidisciplinary

There and Back Again-The Journey of LiNiO2 as a Cathode Active Material

Matteo Bianchini et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2019)

添加到收藏夹

Article Chemistry, Physical

Investigation into Mechanical Degradation and Fatigue of High-Ni NCM Cathode Material: A Long-Term Cycling Study of Full Cells

Simon Schweidler et al.

ACS APPLIED ENERGY MATERIALS (2019)

添加到收藏夹

Article Electrochemistry

Capacity Fading Mechanisms of NCM-811 Cathodes in Lithium-Ion Batteries Studied by X-ray Diffraction and Other Diagnostics

Franziska Friedrich et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2019)

添加到收藏夹

Article Chemistry, Physical

New Insight into Ni-Rich Layered Structure for Next-Generation Li Rechargeable Batteries

Wontae Lee et al.

ADVANCED ENERGY MATERIALS (2018)

添加到收藏夹

Review Chemistry, Physical

Prospect and Reality of Ni-Rich Cathode for Commercialization

Junhyeok Kim et al.

ADVANCED ENERGY MATERIALS (2018)

添加到收藏夹

Review Chemistry, Multidisciplinary

Horizons for Li-Ion Batteries Relevant to Electro-Mobility: High-Specific-Energy Cathodes and Chemically Active Separators

Francis Amalraj Susai et al.

ADVANCED MATERIALS (2018)

添加到收藏夹

Article Chemistry, Physical

Capacity Fading of Ni-Rich Li[NixCoyMn1-x-y]O2 (0.6 ≤ x ≤ 0.95) Cathodes for High-Energy-Density Lithium-Ion Batteries: Bulk or Surface Degradation?

Hoon-Hee Ryu et al.

CHEMISTRY OF MATERIALS (2018)

添加到收藏夹

Review Energy & Fuels

Performance and cost of materials for lithium-based rechargeable automotive batteries

Richard Schmuch et al.

NATURE ENERGY (2018)

添加到收藏夹

Article Energy & Fuels

Tailoring grain boundary structures and chemistry of Ni-rich layered cathodes for enhanced cycle stability of lithium-ion batteries

Pengfei Yan et al.

NATURE ENERGY (2018)

添加到收藏夹

Article Chemistry, Physical

Understanding the trilemma of fast charging, energy density and cycle life of lithium-ion batteries

Xiao-Guang Yang et al.

JOURNAL OF POWER SOURCES (2018)

添加到收藏夹

Article Chemistry, Physical

Charge-Transfer-Induced Lattice Collapse in Ni-Rich NCM Cathode Materials during Delithiation

Aleksandr O. Kondrakov et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2017)

添加到收藏夹

Article Chemistry, Physical

Anisotropic Lattice Strain and Mechanical Degradation of High- and Low-Nickel NCM Cathode Materials for Li-Ion Batteries

Aleksandr O. Kondrakov et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2017)

添加到收藏夹

Editorial Material Chemistry, Physical

Cathode Materials for Future Electric Vehicles and Energy Storage Systems

Aishuak Konarov et al.

ACS ENERGY LETTERS (2017)

添加到收藏夹

Article Chemistry, Physical

Impact of Microcrack Generation and Surface Degradation on a Nickel-Rich Layered Li[Ni0.9Co0.05Mn0.05]O2 Cathode for Lithium-Ion Batteries

Ho-Hyun Sun et al.

CHEMISTRY OF MATERIALS (2017)

添加到收藏夹

Article Electrochemistry

Learning from Overpotentials in Lithium Ion Batteries: A Case Study on the LiNi1/3Co1/3Mn1/3O2 (NCM) Cathode

Johannes Kasnatscheew et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2016)

添加到收藏夹

Article Chemistry, Physical

Lattice volume change during charge/discharge reaction and cycle performance of Li[NixCoyMnz]O2

K. Ishidzu et al.

SOLID STATE IONICS (2016)

添加到收藏夹

Article Electrochemistry

Li+-Ion Extraction/Insertion of Ni-Rich Li1+x(NiyCozMnz)wO2 (0.005 < x < 0.03; y:z=8:1, w ≈ 1) Electrodes: In Situ XRD and Raman Spectroscopy Study

Chandan Ghanty et al.

CHEMELECTROCHEM (2015)

添加到收藏夹

Article Chemistry, Physical

Effects of precursor, synthesis time and synthesis temperature on the physical and electrochemical properties of Li(Ni1-x-yCoxNny)O2 cathode materials

Zhongling Xu et al.

JOURNAL OF POWER SOURCES (2014)

添加到收藏夹

Article Chemistry, Physical

Comparison of the structural and electrochemical properties of layered Li[NixCoyMnz]O2 (x=1/3, 0.5, 0.6, 0.7, 0.8 and 0.85) cathode material for lithium-ion batteries

Hyung-Joo Noh et al.

JOURNAL OF POWER SOURCES (2013)

添加到收藏夹

Article Materials Science, Multidisciplinary

Factors that affect Li mobility in layered lithium transition metal oxides

Kisuk Kang et al.

PHYSICAL REVIEW B (2006)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.