Amorphous iron oxyhydroxides nano precursors used for Reactive Yellow 84 removal from aqueous solutions

In this research, we investigated the potential use of amorphous iron oxyhydroxides, ferrihydrite (FHY), for the removal of persistent pollutants from aqueous solutions. Ethylenediaminetetraacetic acid (EDTA) and ethylenediamine-N, N '-disuccinic acid (EDDS) were used as complexing agents during synthesis aiming to enhance the FHY properties. Synthesized materials were characterized by X-ray diffraction, SEM and TEM Microscopy, N2 sorption/desorption, and FT-IR Spectroscopy for their mineralogy, crystallinity, morphology and size, surface properties, and the organic content in their structure. The addition of chelating agents led to differences in nanoparticles morphology, amorphic degree, and surface properties. Reactive Yellow 84 dye was chosen as a representative refractory pollutant and laboratory-scale adsorption studies were conducted at varying dye concentrations. Ca. 100 % RY 84 dye removal efficiency was achieved within one hour at dye concentrations of 5-10 mg/L for an adsorbent dosage of 1 mg/L FHY. Adsorption kinetics and isothermal studies were considered, the uptake capacity was calculated for each nanomaterial and empiric mechanistic information was derived. The results showed that ferrihydrite exhibits the best performance, with a maximum uptake capacity of 40.73 mg Reactive Yellow 84 dye per gram adsorbent followed by FHY_EDTA and FHY_EDDS (up to 35.86 mg/g). Coupling the adsorption with photodegradation processes led to a significant increase in removal efficiencies of persistent RY 84 from polluted aqueous solution, in good timing, suggesting a feasible alternative at sites where dye concentration in effluents is elevated.

Automated summary

In this study, the potential use of amorphous iron oxyhydroxides (FHY) for removing persistent pollutants from aqueous solutions was investigated. The addition of complexing agents during synthesis enhanced the properties of FHY. The synthesized materials were characterized to assess their mineralogy, crystallinity, morphology, size, surface properties, and organic content. Reactive Yellow 84 dye was chosen as a representative pollutant, and adsorption studies were conducted at varying dye concentrations. The results showed that FHY exhibited the best performance, followed by FHY_EDTA and FHY_EDDS. Coupling adsorption with photodegradation processes significantly increased the removal efficiencies of persistent RY 84 from polluted aqueous solutions, providing a feasible alternative at sites with elevated dye concentrations.