☆ 4.6 Article

Printing MEMS: Application of Inkjet Techniques to the Manufacturing of Inertial Accelerometers

MICROMACHINES (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Review Materials Science, Multidisciplinary

Perovskite micro-/nanoarchitecture for photonic applications

Yang Liu et al.

Summary: Hybrid perovskite family shows exciting optoelectronic properties and chemical/physical versatilities, making it a potential candidate for photonic applications. Micro-/nanoarchitectures play a critical role in determining the photonic properties and spatially patterned arrays through photon-matter-structure interactions. This review summarizes the perovskite micro-/nanoarchitectures and their applications in photonics, including the materials, structures, processing techniques, and the promotion of photon-emitting, -sensing, and -modulating applications.

MATTER (2023)

添加到收藏夹

Review Engineering, Manufacturing

Application of Hybrid Manufacturing processes in microfabrication

Agathoklis A. Krimpenis et al.

Summary: This paper provides an overview and critical review of current methods of 3D printing and hybrid processes, as well as insight for future research and expansion to further applications.

JOURNAL OF MANUFACTURING PROCESSES (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Perovskite Solar Cells with All-Inkjet-Printed Absorber and Charge Transport Layers

Fabian Schackmar et al.

Summary: In this study, scalable and material-efficient perovskite solar cells (PSCs) with inkjet-printed absorber and charge extraction layers were developed, showing an efficiency of >17% and low hysteresis. The devices exhibited excellent short-term stability even under elevated temperature, marking a promising step towards fully inkjet-printed perovskite solar cells.

ADVANCED MATERIALS TECHNOLOGIES (2021)

添加到收藏夹

Article Electrochemistry

Inkjet Printed ZnO Sensors for Early Prostate Cancer Detection by Means of Urine Odor Analysis

C. Bax et al.

Summary: In the second half of the 20th century, inkjet printing technology evolved into a highly versatile materials deposition technology. The use of inkjet MOS sensors for urine analysis in early prostate cancer diagnosis has shown promising results in terms of diagnostic accuracy.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2021)

添加到收藏夹

Article Engineering, Mechanical

Design principles for a single-process 3d-printed accelerometer - theory and experiment

Matic Arh et al.

Summary: Fused-filament fabrication technology has been used for manufacturing various sensors, but faces challenges such as anisotropic behavior and size limitations. This paper focused on the design principles and experimental results of a single-axis accelerometer, providing a foundation for further optimization of the prototype sensor.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2021)

添加到收藏夹

Article Engineering, Electrical & Electronic

Maskless lithography: an approach to SU-8 based sensitive and high-g Z-axis polymer MEMS accelerometer

Mandeep Jangra et al.

Summary: This study investigates Z-axis MEMS accelerometers with varying spring structures, finding that serpentine spring design provides optimal sensitivity. The simulated SU-8 based MEMS accelerometer shows high sensitivity and cost-effectiveness, suitable for industrial applications. The reliability of the microaccelerometers is confirmed through stress analysis, with designed accelerometers showing linear response to acceleration values up to +/- 50 g.

MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS (2021)

添加到收藏夹

Review Chemistry, Analytical

Fabrication of Functional Microdevices in SU-8 by Multi-Photon Lithography

Pooria Golvari et al.

Summary: This review surveys the advances in fabricating functional microdevices using multi-photon lithography (MPL) with the SU-8 material system, focusing on the progress made in the last five years and discussing methods for improving resolution and functionalizing structures after fabrication.

MICROMACHINES (2021)

添加到收藏夹

Article Chemistry, Analytical

A Low-g MEMS Accelerometer with High Sensitivity, Low Nonlinearity and Large Dynamic Range Based on Mode-Localization of 3-DoF Weakly Coupled Resonators

Muhammad Mubasher Saleem et al.

Summary: This paper presents a new design of low-g accelerometer based on MEMS, utilizing mode-localization effect in the resonators for input acceleration measurement. By using mechanically coupled resonators on either side of the proof mass, the sensitivity and dynamic range of the accelerometer are improved.

MICROMACHINES (2021)

添加到收藏夹

Article Engineering, Electrical & Electronic

A Rapid Design and Fabrication Method for a Capacitive Accelerometer Based on Machine Learning and 3D Printing Techniques

Guandong Liu et al.

Summary: MEMS sensors are increasingly used in health monitoring to detect human movements, leading to a demand for low-cost and customizable sensors. This work presents a rapid design and fabrication workflow for accelerometers using an artificial neural network based inverse design method and one-step 3D printing technique. The proposed approach, based on conductive composite material and trained bidirectional ANNs, provides an effective solution for customized and low-cost MEMS devices suitable for IoT applications.

IEEE SENSORS JOURNAL (2021)

添加到收藏夹

Article Chemistry, Analytical

A Low Cost Inkjet-Printed Mass Sensor Using a Frequency Readout Strategy

Bruno Ando et al.

Summary: This paper introduces a fully inkjet-printed mass sensor which utilizes low-cost InkJet Printing technology for sensing and actuation strategies. The sensor's design, implementation, and characteristics are described, showcasing its wide range of potential applications requiring precise mass measurements.

SENSORS (2021)

添加到收藏夹

Article Chemistry, Analytical

3D Printed MEMS Technology-Recent Developments and Applications

Tomasz Blachowicz et al.

MICROMACHINES (2020)

添加到收藏夹

Article Engineering, Electrical & Electronic

Design, fabrication, and characterization of SU-8/carbon black nanocomposite based polymer MEMS acceleration sensor

Aftab Ahmed et al.

MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS (2020)

添加到收藏夹

Article Energy & Fuels

Inkjet 3D Printed MEMS Vibrational Electromagnetic Energy Harvester

Bartosz Kawa et al.

ENERGIES (2020)

添加到收藏夹

Article Chemistry, Analytical

Design and Development of a Fully Printed Accelerometer with a Carbon Paste-Based Strain Gauge

Mingjie Liu et al.

SENSORS (2020)

添加到收藏夹

Article Chemistry, Analytical

Fully Printed Flexible Chemiresistors with Tunable Selectivity Based on Gold Nanoparticles

Bendix Ketelsen et al.

CHEMOSENSORS (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Inkjet printed uniform quantum dots as color conversion layers for full-color OLED displays

Zhiping Hu et al.

NANOSCALE (2020)

添加到收藏夹

Article Multidisciplinary Sciences

Inkjet-printed unclonable quantum dot fluorescent anti-counterfeiting labels with artificial intelligence authentication

Yang Liu et al.

NATURE COMMUNICATIONS (2019)

添加到收藏夹

Article Engineering, Electrical & Electronic

The First 3D-Printed and Wet-Metallized Three-Axis Accelerometer With Differential Capacitive Sensing

Valentina Zega et al.

IEEE SENSORS JOURNAL (2019)

添加到收藏夹

Article Engineering, Electrical & Electronic

Inkjet printed adhesives for advanced M(O)EMS packaging

Ali Roshanghias et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2019)

添加到收藏夹

Article Polymer Science

SU-8 inkjet patterning for microfabrication

R. Bernasconi et al.

POLYMER (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

Three-Dimensionally Printed Micro-electromechanical Switches

Yongwoo Lee et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

添加到收藏夹

Article Engineering, Electrical & Electronic

The First 3-D-Printed z-Axis Accelerometers With Differential Capacitive Sensing

Valentina Zega et al.

IEEE SENSORS JOURNAL (2018)

添加到收藏夹

Article Electrochemistry

Low Cost Inkjet Fabrication of Glucose Electrochemical Sensors Based on Copper Oxide

R. Bernasconi et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2018)

添加到收藏夹

Review Chemistry, Analytical

Inkjet-Printed Wireless Chemiresistive SensorsA Review

Melinda Hartwig et al.

CHEMOSENSORS (2018)

添加到收藏夹

Review Chemistry, Analytical

Low-Cost Inkjet Printing Technology for the Rapid Prototyping of Transducers

Bruno Ando et al.

SENSORS (2017)

添加到收藏夹

Article Chemistry, Analytical

Ink-Jet Printing of Micro-Elelectro-Mechanical Systems (MEMS)

Gih-Keong Lau et al.

MICROMACHINES (2017)

添加到收藏夹

Review Engineering, Mechanical

Additive direct-write microfabrication for MEMS: A review

Kwok Siong Teh

FRONTIERS OF MECHANICAL ENGINEERING (2017)

添加到收藏夹

Review Chemistry, Physical

Inkjet-printed electrochemical sensors

Ana Moya et al.

CURRENT OPINION IN ELECTROCHEMISTRY (2017)

添加到收藏夹

Review Engineering, Electrical & Electronic

Review of polymer MEMS micromachining

Brian J. Kim et al.

JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2016)

添加到收藏夹

Article Engineering, Electrical & Electronic

A Low-Cost Accelerometer Developed by Inkjet Printing Technology

Bruno Ando et al.

IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2016)

添加到收藏夹

Article Engineering, Electrical & Electronic

Characterization of the mechanical behavior of SU-8 at microscale by viscoelastic analysis

Tingge Xu et al.

JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2016)

添加到收藏夹

Article Engineering, Manufacturing

Fabrication of rechargeable lithium ion batteries using water-based inkjet printed cathodes

Yuan Gu et al.

JOURNAL OF MANUFACTURING PROCESSES (2015)

添加到收藏夹

Proceedings Paper Engineering, Mechanical

Microsystems and mechanics

Alberto Corigliano et al.

MECHANICS FOR THE WORLD: PROCEEDINGS OF THE 23RD INTERNATIONAL CONGRESS OF THEORETICAL AND APPLIED MECHANICS, ICTAM2012 (2014)

添加到收藏夹

Review Automation & Control Systems

A review on 3D micro-additive manufacturing technologies

Mohammad Vaezi et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2013)

添加到收藏夹

Article Engineering, Mechanical

Effects of temperature on mechanical properties of SU-8 photoresist material

Soonwan Chung et al.

JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2013)

添加到收藏夹

Article Engineering, Electrical & Electronic

High Sensitivity Polymer Optical Fiber-Bragg-Grating-Based Accelerometer

Alessio Stefani et al.

IEEE PHOTONICS TECHNOLOGY LETTERS (2012)

添加到收藏夹

Article Engineering, Electrical & Electronic

Determining the Young's modulus and creep effects in three different photo definable epoxies for MEMS applications

Kristof Wouters et al.

SENSORS AND ACTUATORS A-PHYSICAL (2009)

添加到收藏夹

Article Engineering, Electrical & Electronic

A method for improved VCSEL packaging using MEMS and ink-jet technologies

AK Nallani et al.

JOURNAL OF LIGHTWAVE TECHNOLOGY (2006)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.