☆ 4.8 Article

In Situ Constructing Robust and Highly Conductive Solid Electrolyte with Tailored Interfacial Chemistry for Durable Li Metal Batteries

SMALL (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Chemistry, Physical

A homogenous solid polymer electrolyte prepared by facile spray drying method is used for room-temperature solid lithium metal batteries

Zehao Zhou et al.

Summary: Solid polymer electrolytes prepared by spray drying method exhibit high tensile strength, high ionic conductivity, and wide electrochemical window, showing good mechanical properties and uniform lithium-ion migration channels, enabling stable cycling performance for lithium batteries.

NANO RESEARCH (2023)

添加到收藏夹

Review Chemistry, Multidisciplinary

Filler-Integrated Composite Polymer Electrolyte for Solid-State Lithium Batteries

Shuailei Liu et al.

Summary: This review discusses the role of fillers in composite polymer electrolytes (CPEs) and their impact on the performance of solid-state lithium batteries. The article focuses on the crucial influence of filler size, concentration, and hybridization strategies on the filler-polymer interface, as well as the latest advances in filler-enabled in situ generation of a Li+-conductive layer. The review also provides insights into the future development and challenges of advanced CPEs for high-performing SSLBs.

ADVANCED MATERIALS (2023)

添加到收藏夹

Article Multidisciplinary Sciences

Tailoring polymer electrolyte ionic conductivity for production of low- temperature operating quasi-all-solid-state lithium metal batteries

Zhuo Li et al.

Summary: This article reports a quasi-solid-state polymer electrolyte that can improve interfacial charge transfer and enable stable lithium metal cell operation even at -30 degrees C. The electrolyte exhibits an ionic conductivity of 2.2 x 10(-4) S cm(-1) at -20 degrees C and inhibits the growth of dendrites on the lithium metal electrode, leading to a dual-layered solid electrolyte interphase formation.

NATURE COMMUNICATIONS (2023)

添加到收藏夹

Article Chemistry, Multidisciplinary

Directional Ion Transport Enabled by Self-Luminous Framework for High-Performance Quasi-Solid-State Lithium Metal Batteries

Siyang Ye et al.

Summary: This study develops a fluorescent ceramic nanowire network to improve the performance of composite gel polymer electrolyte (CGPE) by palliating energy barriers and promoting selective nucleation and growth of polymer monomers. The results demonstrate that CGPE based on the self-luminous framework can achieve high-performance lithium metal batteries.

ADVANCED SCIENCE (2023)

添加到收藏夹

Article Chemistry, Physical

Novel quasi-solid-state composite electrolytes boost interfacial Li+ transport for long-cycling and dendrite-free lithium metal batteries

Yin Cui et al.

Summary: A lotus pod-inspired flexible PC-g-PMT/LL-g-PMT20 membrane has been designed and prepared, improving the interfacial stability of solid-state composite electrolytes (SCEs) and thus enhancing their potential applications in lithium metal batteries.

ENERGY STORAGE MATERIALS (2023)

添加到收藏夹

Article Chemistry, Multidisciplinary

Low-Cost, High-Strength Cellulose-based Quasi-Solid Polymer Electrolyte for Solid-State Lithium-Metal Batteries

Dai Wang et al.

Summary: A low-cost cellulose acetate-based quasi-solid composite polymer electrolyte with high Li+ transference number and excellent interface stability was developed. The partially esterified side groups in the cellulose acetate matrix were found to enhance the migration of Li+ and improve electrochemical stability. This work provides a promising strategy for fabricating cost-effective, stable polymer electrolytes for solid-state lithium batteries.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2023)

添加到收藏夹

Article Chemistry, Multidisciplinary

High Dielectric Poly(vinylidene fluoride)-Based Polymer Enables Uniform Lithium-Ion Transport in Solid-State Ionogel Electrolytes

Jun-Feng Liu et al.

Summary: The incorporation of ionic liquids (ILs) in solid-state polymer electrolytes (iono-SPEs) greatly enhances Li+ transport in polymer phases. By using a poly (vinylidene fluoride-trifluoroethylene-chlorotrifluoroethylene) (PTC) as the framework of ILs, non-uniform Li+ transport among different phases is reduced. This is achieved through weaker adsorption energy of IL cations on PTC chains compared to PVDF and the higher dielectric constant of PTC facilitating the dissociation of Li-anions clusters. The LiFePO4/PTC iono-SPE/Li cells show stable cycling performance with high capacity retention after 1000 cycles at 1 C and 25 degrees C. This work provides a novel approach to induce uniform Li+ flux in iono-SPEs through polarity and dielectric design of the polymer matrix.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2023)

添加到收藏夹

Article Nanoscience & Nanotechnology

A dielectric electrolyte composite with high lithium-ion conductivity for high-voltage solid-state lithium metal batteries

Peiran Shi et al.

Summary: The authors developed a highly conductive and dielectric composite solid-state electrolyte by coupling BaTiO3 and Li0.33La0.56TiO3-x nanowires. This electrolyte promotes the dissociation of lithium salts and efficiently transports the generated movable lithium ions. A robust strategy for creating high-throughput lithium ion transport pathways is proposed by coupling the ceramic dielectric and electrolyte. The resulting highly conductive and dielectric composite solid-state electrolyte exhibits excellent ionic conductivity and lithium transference number, allowing for stable cycling and excellent electrochemical performance of solid-state batteries.

NATURE NANOTECHNOLOGY (2023)

添加到收藏夹

Article Chemistry, Multidisciplinary

Key Roles of Interfacial OH- ion Distribution on Proton Coupled Electron Transfer Kinetics Toward Urea Oxidation Reaction

Ruopeng Li et al.

Summary: A newly raised electrocatalyst of NiCoMoCuOxHy with derived multi-metal co-doping (oxy)hydroxide species during electrochemical oxidation states is reported, which ensures considerable alkaline urea oxidation reaction (UOR) activity. The dendritic nanostructure of NiCoMoCuOxHy creates a strengthened electric field distribution, promoting local OH- enrichment in the electrical double layer (EDL). This structure-induced interfacial microenvironment modulation improves the electrocatalytic UOR performance.

SMALL (2023)

添加到收藏夹

Article Chemistry, Multidisciplinary

Surface Oxygen Vacancy Inducing Li-Ion-Conducting Percolation Network in Composite Solid Electrolytes for All-Solid-State Lithium-Metal Batteries

Heejun Yun et al.

Summary: Composite solid electrolytes (CSEs) have gained attention as newly emerging components for all-solid-state Li-metal batteries, due to their excellent processability and compatibility with the electrodes. This study demonstrates the dominating effect of oxygen vacancies (O-vac) in inorganic fillers on the ionic conductivity of CSEs. The use of indium tin oxide nanoparticles (ITO NPs) as inorganic filler and the modification of O-vac concentration on ITO NPs show a direct verification of the ionic conductivity dependence of the CSEs on the surface O-vac.

SMALL (2023)

添加到收藏夹

Article Chemistry, Multidisciplinary

Development of an Electrophoretic Deposition Method for the In Situ Fabrication of Ultra-Thin Composite-Polymer Electrolytes for Solid-State Lithium-Metal Batteries

Shanshan Yao et al.

Summary: All-solid-state lithium-metal batteries face challenges such as poor Li+ transport, unstable electrolyte/electrode interface, and difficult processing of solid-state electrolytes. Li+-conducting composite polymer electrolytes (CPEs) address these challenges by dispersing sub-micron particles of oxide solid-state electrolyte (OSSE) in a solid, flexible polymer electrolyte (SPE), resulting in improved Li+ conductivity and electrolyte interface.

SMALL (2023)

添加到收藏夹

Article Multidisciplinary Sciences

Polyfluorinated crosslinker-based solid polymer electrolytes for long-cycling 4.5V lithium metal batteries

Lingfei Tang et al.

Summary: Solid polymer electrolytes (SPEs) are considered promising electrolyte for long-cycling lithium metal batteries (LMBs). However, the narrow electrochemical stability window (ESW) of typical SPEs limits the improvement of LMBs' specific capacity and energy density. In this study, a polyfluorinated crosslinker was applied to enhance the oxidation resistance of SPEs, resulting in a wide ESW and improved performance of high-voltage LMBs.

NATURE COMMUNICATIONS (2023)

添加到收藏夹

Article Chemistry, Physical

Molecular coordination induced high ionic conductivity of composite electrolytes and stable LiF/Li3N interface in long-term cycling all-solid-state lithium metal batteries

Shujie Liu et al.

Summary: Researchers report a mesoporous black LaxCoO3-delta nanofiber film with tunable cationic defects that can regulate the molecular coordination with PEO/LiTFSI matrix, achieving stable operations of ASSLMBs over 1000 cycles. By tuning the A-site defects, the LaxCoO3-delta dNFs show gradually enhanced coordination with PEO/LiTFSI, resulting in high ionic conductivity. The defective La0.8CoO3-delta can catalyze the formation of stable LiF/Li3N interfacial layers, enabling stable battery operations even at high currents.

ENERGY STORAGE MATERIALS (2023)

添加到收藏夹

Article Materials Science, Multidisciplinary

MOF-Based 3D Ion-Conducting Network Enables High-Voltage All-Solid-State Lithium Metal Batteries at Room Temperature

Siyan Zheng et al.

Summary: A highly efficient and robust MOF-based 3D ion conducting network was designed by in situ growing MOF nanocrystals on a 3D polyimide fiber network, which improved ion transport and mechanical support. The resulting composite solid electrolyte demonstrated high ionic conductivity, excellent mechanical strength, and stable cycling of high-voltage all-solid-state Li-metal batteries at room temperature.

ACS MATERIALS LETTERS (2023)

添加到收藏夹

Review Materials Science, Multidisciplinary

Achieving high-energy and high-safety lithium metal batteries with high-voltage-stable solid electrolytes

Zi-You Wang et al.

Summary: In the pursuit of next-generation energy storage systems, solid-state lithium metal batteries (SSLMBs) have attracted considerable attention for their high-energy density, enhanced safety, and cycle-life benefits. However, the degradation of solid electrolytes (SEs) is a major concern in SSLMBs, especially at high voltages. This review summarizes recent developments in SEs for high-voltage SSLMBs, including their understanding, degradation mechanisms, and application prospects. Design principles for achieving stability in SEs under high voltage are highlighted, and challenges and perspectives on high-voltage-stable SEs and SSLMBs are discussed.

MATTER (2023)

添加到收藏夹

Article Chemistry, Multidisciplinary

A Multifunctional Silicon-Doped Polyether Network for Double Stable Interfaces in Quasi-Solid-State Lithium Metal Batteries

Qi Zhang et al.

Summary: This study demonstrates that silicon-doped polyether can induce the formation of stable and robust solid-electrolyte-interface layers in lithium metal batteries, solving the compatibility issue between electrolyte and electrodes. The concept of using a polymer with a crosslinking structure provides a strategy for designing stable solid-state or quasi-solid-state polymer electrolytes for long-term operation of both anode and cathode.

SMALL (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Janus Electrolyte with Modified Li+ Solvation for High-Performance Solid-State Lithium Batteries

Yuzhen Hu et al.

Summary: A Janus quasi-solid electrolyte (JSE) design is reported, which improves the Li+ kinetics of solid electrolyte and interface compatibility between electrolyte and lithium anode. It modifies the Li+ solvation environment and creates efficient Li+ transportation channels. The JSE exhibits excellent ionic conductivity and high lithium transference number, leading to impressive performance and safety in solid-state batteries.

ADVANCED FUNCTIONAL MATERIALS (2022)

添加到收藏夹

Article Multidisciplinary Sciences

In situ infrared nanospectroscopy of the local processes at the Li/polymer electrolyte interface

Xin He et al.

Summary: The authors use in situ infrared nanospectroscopy to study the lithium-polymer-electrolyte interface in solid-state batteries, revealing its intrinsic molecular, structural, and chemical heterogeneities. This research is crucial for understanding the physicochemical properties of the interface and providing engineering solutions.

NATURE COMMUNICATIONS (2022)

添加到收藏夹

Article Chemistry, Physical

Hierarchically Self-Assembled MOF Network Enables Continuous Ion Transport and High Mechanical Strength

Lulu Du et al.

Summary: In this research, a hierarchically self-assembled metal-organic framework (MOF) network was designed to provide continuous ion transport and mechanical support for composite polymer electrolytes, improving the ionic conductivity and mechanical strength. The structure was achieved by constructing well-ordered MOF nanocrystals along 1D polyimide fibers, and sub-nano pores and Lewis acid sites in MOF nanocrystals selectively confined the movement of larger anions.

ADVANCED ENERGY MATERIALS (2022)

添加到收藏夹

Article Chemistry, Physical

Fabrication of asymmetric bilayer solid-state electrolyte with boosted ion transport enabled by charge-rich space charge layer for-20∼70° C lithium metal battery

Jin Li et al.

Summary: This study addresses the challenges of lithium dendrite growth and electrolyte/electrode interface resistance in LLZTO by forming a local conjugated polymer solid-state electrolyte nanolayer. The composite electrolyte shows high ionic conductivity and improved performance of lithium metal batteries.

NANO ENERGY (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Enabling High-Voltage Superconcentrated Ionogel-in-Ceramic Hybrid Electrolyte with Ultrahigh Ionic Conductivity and Single Li+-Ion Transference Number

Yanfang Zhai et al.

Summary: This study reports a unique superconcentrated ionogel-in-ceramic (SIC) electrolyte with high ionic conductivity, large Li+-ion transference numbers, and good compatibility with both Li-metal anodes and high-voltage cathodes. The SIC electrolyte exhibits ultrahigh ionic conductivity, high Li+-ion transference number, low electronic conductivity, and wide electrochemical stability window, making it promising for safe and high-energy lithium-metal batteries.

ADVANCED MATERIALS (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Tree-Trunk Design for Flexible Quasi-Solid-State Electrolytes with Hierarchical Ion-Channels Enabling Ultralong-Life Lithium-Metal Batteries

Yun Zheng et al.

Summary: This study reports a novel tree-trunk design flexible and robust quasi-solid-state electrolyte for ultralong-life lithium-metal batteries. The electrolyte forms hierarchical ion-channels, enabling rapid ion transfer kinetics and excellent durability. Flexible batteries fabricated with this electrolyte achieve high capacity and excellent cycle life under high load and mass loading.

ADVANCED MATERIALS (2022)

添加到收藏夹

Article Multidisciplinary Sciences

An improved 9 micron thick separator for a 350 Wh/kg lithium metal rechargeable pouch cell

Zhi Chang et al.

Summary: Thin separators can improve the energy densities of batteries but also increase the risk of short circuits. In this study, an improved thin metal-organic frameworks separator is reported to enhance the resistance to dendrite formation and cycling stability of high-voltage lithium batteries in carbonate electrolytes.

NATURE COMMUNICATIONS (2022)

添加到收藏夹

Review Chemistry, Physical

Recent Advances in Conduction Mechanisms, Synthesis Methods, and Improvement Strategies for Li1+xAlxTi2-x(PO4)3 Solid Electrolyte for All-Solid-State Lithium Batteries

Pengfei Wu et al.

Summary: Solid-state electrolytes are key to developing safe and high-energy-density Li batteries. LATP has been hailed as an attractive candidate due to its excellent electrochemical stability, low production costs, and good chemical compatibility. However, its poor thermal stability at high temperatures and interfacial reactions with electrodes limit its practical use. This review provides a comprehensive overview of recent advances in LATP for solid-state batteries and discusses potential solutions.

ADVANCED ENERGY MATERIALS (2022)

添加到收藏夹

Article Chemistry, Physical

In-situ constructing ceramer electrolytes with robust-flexible interfaces enabling long-cycling lithium metal batteries

Dongli Chen et al.

Summary: This research improves the lifetime and safety of lithium metal batteries by synthesizing a novel ceramer electrolyte, which exhibits outstanding performance such as long cycle life, dendrite-free property, and high capacity retention.

ENERGY STORAGE MATERIALS (2022)

添加到收藏夹

Article Chemistry, Physical

Improved ionic conductivity and enhancedinterfacial stability of solid polymer electrolytes with porous ferroelectric ceramic nanofibers

Junbao Kang et al.

Summary: Innovatively preparing porous ferroelectric ceramic nanofibers helped to construct fast conductive networks, significantly improving lithium ion conductivity in solid polymer electrolytes. Additionally, utilizing the piezoelectric properties of the nanofibers allowed for dynamic regulation of the electrolyte/lithium interface, leading to enhanced cycle stability and cycling performance in lithium ion batteries.

ENERGY STORAGE MATERIALS (2022)

添加到收藏夹

Review Chemistry, Physical

Identifying soft breakdown in all-solid-state lithium battery

Changhong Wang et al.

Summary: This paper discusses the overlooked issue of soft breakdown in all-solid-state lithium batteries (ASSLBs) and proposes an effective method for diagnosis. By analyzing the significant effect of critical parameters, a testing benchmark is established to guide scientific understanding and engineering design.

JOULE (2022)

添加到收藏夹

Article Chemistry, Physical

Constructing 3D Li+-percolated transport network in composite polymer electrolytes for rechargeable quasi-solid-state lithium batteries

Yingmin Jin et al.

Summary: The rational design of a unique solid electrolyte structure improves the ion conductivity and enhances the cycling performance and voltage endurance of batteries, resulting in excellent performance of lithium batteries.

ENERGY STORAGE MATERIALS (2022)

添加到收藏夹

Article Nanoscience & Nanotechnology

Quasi-Solid-State Ion-Conducting Arrays Composite Electrolytes with Fast Ion Transport Vertical-Aligned Interfaces for All-Weather Practical Lithium-Metal Batteries

Xinyang Li et al.

Summary: The rapid improvement in gel polymer electrolytes (GPEs) has brought them closer to practical applications in solid-state Li-metal batteries. By introducing ion-conducting arrays (ICA) into GPEs, rapid ion transport and enhanced electrolyte stability have been achieved.

NANO-MICRO LETTERS (2022)

添加到收藏夹

Article Chemistry, Applied

A cerium-doped NASICON chemically coupled poly(vinylidene fluoride-hexafluoropropylene)-based polymer electrolyte for high-rate and high-voltage quasi-solid-state lithium metal batteries

Tao Huang et al.

Summary: A novel quasi-solid-state composite polymer electrolyte with high ionic conductivity and excellent cycling stability has been developed for lithium metal batteries.

JOURNAL OF ENERGY CHEMISTRY (2022)

添加到收藏夹

Article Chemistry, Physical

In situ formed self-healable quasi-solid hybrid electrolyte network coupled with eutectic mixture towards ultra-long cycle life lithium metal batteries

Yanxin Jiang et al.

Summary: A self-healable quasi-solid hybrid electrolyte has been developed for next-generation lithium metal batteries. This electrolyte shows high ionic conductivity and wide electrochemical stability window, and exhibits excellent performance in lithium symmetrical cells and lithium iron phosphate cathodes.

ENERGY STORAGE MATERIALS (2022)

添加到收藏夹

Article Chemistry, Physical

Insight into the integration way of ceramic solid-state electrolyte fillers in the composite electrolyte for high performance solid-state lithium metal battery

Zhiheng Ren et al.

Summary: Reasonably combining ceramic solid-state electrolytes (SSEs) and polymer-based SSEs to create versatile composite SSEs has provided new enlightenment for the development of solid-state lithium metal batteries (SSLMBs). Through different integration ways of Li6.4La3Zr1.4Ta0.6O12 (LLZTO) with electrospinned 3D polyacrylonitrile (PAN) nanofiber and a polymer electrolyte, a higher ionic conductivity, lithium transference number, and mechanical strength were achieved, leading to improved electrochemical performances in solid-state batteries.

ENERGY STORAGE MATERIALS (2022)

添加到收藏夹

Article Engineering, Chemical

High-performance electrospun membrane for lithium-ion batteries

Minggui Zou et al.

Summary: This study reports on the surface modification of EVO-Li membranes with poly-dopamine to enhance their mechanical properties. The reaction of PDA with EVO-Li forms C-N-O bonds, improving the ultimate tensile strength of the membrane and enhancing its water uptake property and thermostability.

JOURNAL OF MEMBRANE SCIENCE (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Open-Structured Nanotubes with Three-Dimensional Ion-Accessible Pathways for Enhanced Li+ Conductivity in Composite Solid Electrolytes

Song Hu et al.

Summary: The first-time use of gradient electrospinning to fabricate open-structured LLTO nanotubes as ion-conductive fillers in CSEs led to superior ionic conductivity and electrochemical stability in solid electrolytes.

ACS APPLIED MATERIALS & INTERFACES (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Solid-State Lithium Metal Batteries with Extended Cycling Enabled by Dynamic Adaptive Solid-State Interfaces

Shujie Liu et al.

Summary: Improving the long-term cycling stability of solid-state lithium metal batteries by constructing brick-and-mortar electrolytes allows for high performance, excellent electrochemical compatibility with electrodes, and potential practical applications with flexibility and safety.

ADVANCED MATERIALS (2021)

添加到收藏夹

Article Chemistry, Physical

A high-performance, solution-processable polymer/ceramic/ionic liquid electrolyte for room temperature solid-state Li metal batteries

Xiujing Lin et al.

Summary: All-solid-state electrolytes provide a guarantee for the safe operation of Li metal batteries with high energy density, but face challenges of low ionic conductivity and huge interfacial impedance with lithium anodes. The introduction of ionic liquids is expected to solve these issues, as shown in this study where an in situ LiF-rich solid-electrolyte interface on the lithium anode was triggered by the reductive decomposition of IL and Li1.5Al0.5Ge1.5(PO4)3-involved electrolyte, leading to stable Li plating/stripping behavior and high performance in solid-state LMBs.

NANO ENERGY (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Interfacial Chemistry Enables Stable Cycling of All-Solid-State Li Metal Batteries at High Current Densities

Biyi Xu et al.

Summary: The addition of Mg(ClO4)(2) into PEO-based composite electrolyte effectively regulates Li+ ion transport and enhances the Li+ ion mobility, leading to the formation of a conductive Li2MgCl4/LiF interfacial layer that homogenizes Li+ flux and increases the critical current density to a record 2 mA cm(-2). These findings highlight the importance of surface chemistry and interfacial engineering in designing high-current-density all-solid-state Li metal batteries.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2021)

添加到收藏夹

Article Chemistry, Physical

Se-induced underpotential deposition of amorphous CoSe2 ultrathin nanosheet arrays as high-efficiency oxygen evolution electrocatalysts for zinc-air batteries

Ruopeng Li et al.

Summary: In this study, amorphous CoSe2 ultrathin nanosheet arrays were electrodeposited and exhibited superior catalytic activity towards OER compared to their crystalline counterparts and commercial catalysts. When used as an air cathode in a zinc-air battery, the amorphous CoSe2 showed better performance and cyclic stability than crystalline CoSe2 and Pt/C-RuO2 electrodes. This work presents a new underpotential deposition strategy for fabricating high-activity amorphous catalysts with great potential for practical applications.

MATERIALS TODAY ENERGY (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Ultrathin Yet Robust Single Lithium-Ion Conducting Quasi-Solid-State Polymer-Brush Electrolytes Enable Ultralong-Life and Dendrite-Free Lithium-Metal Batteries

Minghong Zhou et al.

Summary: The novel superstructured polymer bottlebrush with a nanofibril backbone and soft functional polymer side-chains provides a promising strategy to balance the mechanical strength and ion conductivity of quasi-solid-state polymer electrolytes. The resulting electrolytes enable ultralong-term stable lithium plating/stripping in lithium-metal batteries, showcasing potential for advanced solid-state lithium-metal batteries.

ADVANCED MATERIALS (2021)

添加到收藏夹

Article Chemistry, Physical

Interface regulation enabling three-dimensional Li1.3Al0.3Ti1.7(PO4)3-reinforced composite solid electrolyte for high-performance lithium batteries

Yingmin Jin et al.

Summary: A novel structural design of ceramic-enriched CSE containing LATP, PVDF, and LiTFSI was reported, showing improved ionic conductivity through the interconnected LATP network. The electrolyte maximizes the utilization of inorganic fillers through facile treatment of zero-dimensional materials, comparable to 3D template-derived fillers, while ensuring continuous Li+ conduction pathways through LATP framework and LATP/PVDF interphase.

JOURNAL OF POWER SOURCES (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Flexible, Mechanically Robust, Solid-State Electrolyte Membrane with Conducting Oxide-Enhanced 3D Nanofiber Networks for Lithium Batteries

Mengmeng Zhang et al.

Summary: The study introduced a novel 3D ion-conducting network by utilizing LLZO nanoparticles reinforced conducting polymer nanofibers, creating a lightweight continuous and interconnected LLZO-enhanced 3D network that outperforms traditional heavy and brittle ceramic nanofibers.

NANO LETTERS (2021)

添加到收藏夹

Review Nanoscience & Nanotechnology

Tailoring inorganic-polymer composites for the mass production of solid-state batteries

Li-Zhen Fan et al.

Summary: Solid-state batteries are being revived as a safer and more energy-dense alternative to conventional Li-ion batteries, and the development of suitable solid electrolytes, such as inorganic-polymer composites, is crucial for their mass production. Various challenges in terms of processing technologies and integration into batteries need to be addressed for the successful implementation of inorganic-polymer composite electrolytes in solid-state batteries.

NATURE REVIEWS MATERIALS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

In situ formation of polymer-inorganic solid-electrolyte interphase for stable polymeric solid-state lithium-metal batteries

Tao Deng et al.

Summary: The study addresses the challenges faced by CPEs in SSLBs through the design of a LiF-rich SEI, which improves ionic conductivity and oxidation stability while reducing interfacial resistance and allowing for high critical current density. The fabricated SSLBs show exceptional electrochemical performance and long cycling stability, demonstrating the potential for this SEI design approach to be applied to other battery types.

CHEM (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Enhanced Surface Interactions Enable Fast Li+ Conduction in Oxide/Polymer Composite Electrolyte

Nan Wu et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Fast Li+ Conduction Mechanism and Interfacial Chemistry of a NASICON/Polymer Composite Electrolyte

Nan Wu et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2020)

添加到收藏夹

Article Polymer Science

Structural Transformation of Polyacrylonitrile (PAN) Fibers during Rapid Thermal Pretreatment in Nitrogen Atmosphere

Wei Dang et al.

POLYMERS (2020)

添加到收藏夹

Article Chemistry, Physical

Effect of NASICON-type LiSnZr(PO4)3 ceramic filler on the ionic conductivity and electrochemical behavior of PVDF based composite electrolyte

Tanvi Pareek et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

添加到收藏夹

Article Engineering, Environmental

Designing of multilevel-nanofibers-based organic-inorganic hybrid gel electrolyte enabling an innovative lithium-ion battery with superior ionic transport capability and advanced security

Huijuan Zhao et al.

CHEMICAL ENGINEERING JOURNAL (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Three-Dimensional-Percolated Ceramic Nanoparticles along Natural-Cellulose-Derived Hierarchical Networks for High Li+ Conductivity and Mechanical Strength

Chao Wang et al.

NANO LETTERS (2020)

添加到收藏夹

Article Multidisciplinary Sciences

Interface chemistry of an amide electrolyte for highly reversible lithium metal batteries

Qidi Wang et al.

NATURE COMMUNICATIONS (2020)

添加到收藏夹

Article Engineering, Environmental

Surface fluorinated Ce-doped TiO2 nanostructure photocatalyst: A trap and remove strategy to enhance the VOC removal from indoor air environment

Zahra Shayegan et al.

CHEMICAL ENGINEERING JOURNAL (2020)

添加到收藏夹

Review Electrochemistry

Review-Polymer/Ceramic Interface Barriers: The Fundamental Challenge for Advancing Composite Solid Electrolytes for Li-Ion Batteries

Yonatan Horowitz et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2020)

添加到收藏夹

Article Chemistry, Physical

Garnet-rich composite solid electrolytes for dendrite-free, high-rate, solid-state lithium-metal batteries

Chaoyi Yan et al.

ENERGY STORAGE MATERIALS (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Ionic Conduction in Composite Polymer Electrolytes: Case of PEO:Ga-LLZO Composites

Zhuo Li et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

添加到收藏夹

Article Chemistry, Physical

Designing In-Situ-Formed Interphases Enables Highly Reversible Cobalt-Free LiNiO2 Cathode for Li-ion and Li-metal Batteries

Tao Deng et al.

JOULE (2019)

添加到收藏夹

Review Chemistry, Multidisciplinary

Promises, Challenges, and Recent Progress of Inorganic Solid-State Electrolytes for All-Solid-State Lithium Batteries

Zhonghui Gao et al.

ADVANCED MATERIALS (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

A 3D Nanostructured Hydrogel-Framework-Derived High-Performance Composite Polymer Lithium-Ion Electrolyte

Jiwoong Bae et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2018)

添加到收藏夹

Article Chemistry, Physical

Effects of Li6.75La3Zr1.75Ta0.25O12 on chemical and electrochemical properties of polyacrylonitrile-based solid electrolytes

Xue Zhang et al.

SOLID STATE IONICS (2018)

添加到收藏夹

Article Multidisciplinary Sciences

Fluorinated solid electrolyte interphase enables highly reversible solid-state Li metal battery

Xiulin Fan et al.

SCIENCE ADVANCES (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Synergistic Coupling between Li6.75La3Zr1.75Ta0.25O12 and Poly(vinylidene fluoride) Induces High Ionic Conductivity, Mechanical Strength, and Thermal Stability of Solid Composite Electrolytes

Xue Zhang et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2017)

添加到收藏夹

Article Chemistry, Physical

A correlation between formation enthalpy and ionic conductivity in perovskite-structured Li3xLa0.67-xTiO3 solid lithium ion conductors

Xin Guo et al.

JOURNAL OF MATERIALS CHEMISTRY A (2017)

添加到收藏夹

Article Chemistry, Physical

Dead lithium: mass transport effects on voltage, capacity, and failure of lithium metal anodes

Kuan-Hung Chen et al.

JOURNAL OF MATERIALS CHEMISTRY A (2017)

添加到收藏夹

Review Nanoscience & Nanotechnology

Lithium battery chemistries enabled by solid-state electrolytes

Arumugam Manthiram et al.

NATURE REVIEWS MATERIALS (2017)

添加到收藏夹

Article Materials Science, Ceramics

Experimental and theoretical Raman study on the structure and microstructure of Li0.30La0.57TiO3 electrolyte prepared by the sol-gel method in acetic medium

Mariano Romero et al.

CERAMICS INTERNATIONAL (2016)

添加到收藏夹

Article Energy & Fuels

Design principles for electrolytes and interfaces for stable lithium-metal batteries

Mukul D. Tikekar et al.

NATURE ENERGY (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

Development of ion conducting polymer gel electrolyte membranes based on polymer PVdF-HFP, BMIMTFSI ionic liquid and the Li-salt with improved electrical, thermal and structural properties

Shalu et al.

JOURNAL OF MATERIALS CHEMISTRY C (2015)

添加到收藏夹

Article Chemistry, Physical

Structure and thermo-chemical properties of continuous bundles of aligned and stretched electrospun polyacrylonitrile precursor nanofibers collected in a flowing water bath

Jie Liu et al.

CARBON (2012)

添加到收藏夹

Article Physics, Applied

Nanoscale Characterization of Domain Structures in Bi4Ti3O12 Single Crystals Using Near-Field Raman Spectroscopy

Claudia Carmignano et al.

JAPANESE JOURNAL OF APPLIED PHYSICS (2011)

添加到收藏夹

Article Chemistry, Physical

Role of functional nano-sized inorganic fillers in poly(ethylene) oxide-based polymer electrolytes

KS Ji et al.

JOURNAL OF POWER SOURCES (2003)

添加到收藏夹

Article Electrochemistry

Role of the ceramic fillers in enhancing the transport properties of composite polymer electrolytes

F Croce et al.

ELECTROCHIMICA ACTA (2001)

添加到收藏夹

Article Chemistry, Physical

Ion association and ion solvation effects at the crystalline-amorphous phase transition in PEO-LiTFSI

L Edman

JOURNAL OF PHYSICAL CHEMISTRY B (2000)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.