相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Warpage and residual stress analyses of post-mold cure process of IC packages
Ming-Yu Lin et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2023)
Development and verification of a cure-dependent visco-thermo-elastic simulation model for predicting the process-induced surface waviness of continuous fiber reinforced thermosets
N. Lorenz et al.
JOURNAL OF COMPOSITE MATERIALS (2023)
An experimental and numerical study of curing deformation considering tool-part interaction for two-step curing tooling composite materials
Yao Xiao et al.
JOURNAL OF MANUFACTURING PROCESSES (2023)
A review on prediction and control of curing process-induced deformation of continuous fiber-reinforced thermosetting composite structures
Biao Wang et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2023)
Characterization and modeling cure- and pressure-dependent thermo-mechanical and shrinkage behavior of fast curing epoxy resins
N. Lorenz et al.
POLYMER TESTING (2022)
Simulation methodology development of warpage estimation for epoxy molding compound under considerations of stress relaxation characteristics and curing conditions applied in semiconductor packaging
Chang-Chun Lee et al.
MATERIALS SCIENCE IN SEMICONDUCTOR PROCESSING (2022)
Measuring and understanding cure-dependent viscoelastic properties of epoxy resin: A review
Michael Mueller-Pabel et al.
POLYMER TESTING (2022)
Comparative study on the effect of cure parameters on residual deformation for thermoset composite laminates
Zhendong Liu et al.
JOURNAL OF COMPOSITE MATERIALS (2021)
A coupled hygrothermo-mechanical viscoelastic analysis of multilayered composite plates for long-term creep behaviors
Sy-Ngoc Nguyen et al.
COMPOSITE STRUCTURES (2020)
Cure-induced residual stresses for warpage reduction in thermoset laminates
Giacomo Struzziero et al.
JOURNAL OF COMPOSITE MATERIALS (2020)
Plasticity of borosilicate glasses under uniaxial tension
Kuo-Hao Lee et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2020)
Developing a thermomechanical and thermochemical model for investigating the cooling rate effects on the distortion of unsymmetrical viscoelastic polymeric composite laminates
Mohsen Mobarakian et al.
POLYMER TESTING (2020)
Simulation and Validation of Injection-Compression Filling Stage of Liquid Moulding with Fast Curing Resins
Ffion A. Martin et al.
APPLIED COMPOSITE MATERIALS (2019)
Thickness effect on spring-in of prepreg composite L-profiles - An experimental study
Erik Horberg et al.
COMPOSITE STRUCTURES (2019)
Fast processing and continuous simulation of automotive structural composite components
Frank Henning et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2019)
Spring-back behavior on L-shaped composite structures: A statistical analysis of angular recovery as a function of time and residual cure
Glaucio C. Pereira et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2019)
Optical measurement of surface topographies with transparent coatings
Xiaobing Feng et al.
OPTICS AND LASERS IN ENGINEERING (2019)
Investigation of non-uniform gelation effects on residual stresses of thick laminates based on tailed FBG sensor
Haixiao Hu et al.
COMPOSITE STRUCTURES (2018)
Numerical analysis of viscoelastic process-induced residual distortions during manufacturing and post-curing
Maria Benavente et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2018)
Investigation on the influence of humidity on the topography of surfaces of polymeric class A carbon fiber reinforced plastics
M. Kraemer et al.
JOURNAL OF COMPOSITE MATERIALS (2018)
Correlation between subjective perception and objective parameters for the characterisation of fibre print-through on surfaces of class A carbon fibre for reinforced plastics via multidimensional scaling
Matthias Kraemer et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2018)
Some Considerations about the Use of Contact and Confocal Microscopy Methods in Surface Texture Measurement
Jesus Caja Garcia et al.
MATERIALS (2018)
A Review on the Mechanical Modeling of Composite Manufacturing Processes
Ismet Baran et al.
ARCHIVES OF COMPUTATIONAL METHODS IN ENGINEERING (2017)
Viscoelastic distortion in asymmetric plates during post curing
Maria Benavente et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2017)
Trainable Weka Segmentation: a machine learning tool for microscopy pixel classification
Ignacio Arganda-Carreras et al.
BIOINFORMATICS (2017)
Fast-curing epoxy polymers with silica nanoparticles: properties and rheo-kinetic modelling
A. Keller et al.
JOURNAL OF MATERIALS SCIENCE (2016)
A thermo-viscoelastic model of process-induced residual stresses in composite structures with considering thermal dependence
Anxin Ding et al.
COMPOSITE STRUCTURES (2016)
In-mould gel-coating for polymer composites
Zoltan J. Gombos et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)
Identification and quantitation of processing parameters controlling the surface quality of carbon fibre-reinforced composites
Johannes Kunze et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2016)
Determination of volumetric shrinkage of thermally cured thermosets using video-imaging
Wibke Exner et al.
POLYMER TESTING (2016)
Analysing process-induced deformation and stresses using a simulated manufacturing process for composite multispar flaps
Christian Brauner et al.
JOURNAL OF COMPOSITE MATERIALS (2015)
In-mould gel-coating of polymer composites: a review
William Rogers et al.
JOURNAL OF CLEANER PRODUCTION (2014)
A new approach to investigate relationships between certain instrumentally measured appearance parameters and their visually perceived equivalents in the automotive industry
F. Mirjalili et al.
JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH (2014)
Cost-Effective Manufacturing Process for the Development of Automotive From Energy Efficient Composite Materials and Sandwich Structures
Laraib Alam Khan et al.
POLYMER COMPOSITES (2014)
Effect of Manufacturing Method and Aging Environment on Painted Automotive Carbon Fibre Composite Surfaces
M. L. de Souza et al.
APPLIED COMPOSITE MATERIALS (2013)
A revised Michel-Levy interference colour chart based on first-principles calculations
Bjorn Eske Sorensen
EUROPEAN JOURNAL OF MINERALOGY (2013)
Chemical shrinkage and thermomechanical characterization of an epoxy resin during cure by a novel in situ measurement method
C. Billotte et al.
EUROPEAN POLYMER JOURNAL (2013)
Hygrothermal effects on painted carbon fibre composite surfaces
M. L. de Souza et al.
JOURNAL OF COMPOSITE MATERIALS (2013)
Coefficient of thermal expansion evolution for cryogenic preconditioned hybrid carbon fiber/glass fiber-reinforced polymeric composite materials
D. Luca Motoc et al.
JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2013)
Experimental identification of process parameters inducing warpage of autoclave-processed CFRP parts
D. Stefaniak et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2012)
Surface evaluation of carbon fibre composites using wavelet texture analysis
Stuart Palmer et al.
COMPOSITES PART B-ENGINEERING (2012)
Numerical simulations for class A surface finish in resin transfer moulding process
Genevieve Palardy et al.
COMPOSITES PART B-ENGINEERING (2012)
Measurement of fibre waviness in industrial composite components
M. P. F. Sutcliffe et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2012)
Mesh generation and geometrical modelling of 3D woven composites with variable tow cross-sections
E. Potter et al.
COMPUTATIONAL MATERIALS SCIENCE (2012)
Modeling of curing processes based on a multi-field potential. Single- and multiscale aspects
S. Klinge et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2012)
Microlevel manufacturing process simulation of carbon fiber/epoxy composites to analyze the effect of chemical and thermal induced residual stresses
Christian Brauner et al.
JOURNAL OF COMPOSITE MATERIALS (2012)
Bendability optimization of flexible optical nanoelectronics via neutral axis engineering
Sangmin Lee et al.
NANOSCALE RESEARCH LETTERS (2012)
Investigation of process-induced strains development by fibre Bragg grating sensors in resin transfer moulded composites
Lolei Khoun et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2011)
The effect of a rapid curing process on the surface finish of a carbon fibre epoxy composite
M. L. Herring et al.
COMPOSITES PART B-ENGINEERING (2011)
Predicting the surface waviness of sheet moulding compound parts by simulating process-induced thermal stresses
Walter Michaeli et al.
JOURNAL OF POLYMER ENGINEERING (2011)
Physical Aging of Epoxy Polymers and Their Composites
G. M. Odegard et al.
JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS (2011)
Role of tool-part interaction in process-induced warpage of autoclave-manufactured composite structures
X. Zeng et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2010)
Compression-after-impact response of woven fiber-reinforced composites
Hao Yan et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2010)
Discussion on the Cause of Print-through Phenomenon of FRP and Several Improvement Methods
Huei-Jeng Lin et al.
JOURNAL OF COMPOSITE MATERIALS (2010)
The effect of material selection and manufacturing process on the surface finish of carbon fibre composites
M. L. Herring et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2010)
Cure Shrinkage Characterization of an Epoxy Resin System by Two in Situ Measurement Methods
Lolei Khoun et al.
POLYMER COMPOSITES (2010)
Optimization of RTM processing parameters for Class A surface finish
Genevieve Palardy et al.
COMPOSITES PART B-ENGINEERING (2008)
Print-through phenomenon on the surface of GFRP: Pilot study
Huei-Jeng Lin et al.
JOURNAL OF COMPOSITE MATERIALS (2007)
Comparison of optical and stylus methods for measurement of surface texture
T. V. Vorburger et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2007)
Surface quality prediction of thermoset composite structures using geometric simulation tools
P. J. Schubet et al.
PLASTICS RUBBER AND COMPOSITES (2007)
Methods to reduce the print-through phenomenon on the surface of FRP
Huei-Jeng Lin et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2007)
Mechanisms generating residual stresses and distortion during manufacture of polymer-matrix composite structures
MR Wisnom et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2006)
Characterisation of thermoset laminates for cosmetic automotive applications: Part I - Surface characterisation
Peter J. Schubel et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2006)
Characterisation of thermoset laminates for cosmetic automotive applications: Part II - Cure and residual volatile assessment
Peter J. Schubel et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2006)
Characterisation of thermoset laminates for cosmetic automotive applications: Part III - Shrinkage control via nanoscale reinforcement
Peter J. Schubel et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2006)
Theoretical analysis of the surface texture of textile-reinforced thermoplastics
P Mitschang et al.
POLYMERS & POLYMER COMPOSITES (2003)
Surface quality and shrinkage of the composite bus housing panel manufactured by RTM
PJ Kim et al.
COMPOSITE STRUCTURES (2002)
Spring-in and warpage of angled composite laminates
C Albert et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2002)
Characterisation and thermal behaviour of a borosilicate glass
MM Lima et al.
THERMOCHIMICA ACTA (2001)
Surface quality characterization of textile-reinforced thermoplastics
M Neitzel et al.
POLYMER COMPOSITES (2000)
Separating sources of manufacturing distortion in laminated composites
DW Radford et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2000)
分享论文
