☆ 4.8 Article

Thermal management strategies and power ratings of electric vehicle motors

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2024)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Energy & Fuels

Heat dissipation design of end winding of permanent magnet synchronous motor for electric vehicle

Li Ye et al.

Summary: This paper investigates the use of potting materials and heat pipes to improve the cooling efficiency of the motor. The experimental results show that improving the heat transfer at the ends of the coil reduces the motor temperature rising by 13.7%-19.6%.

ENERGY REPORTS (2023)

添加到收藏夹

Article Thermodynamics

Optimization of oil flow distribution inside the in-wheel motor assembly of electric vehicles for improved thermal performance

Arslan Saleem et al.

Summary: This study aims to optimize the thermal performance of an electric vehicle in-wheel motor by optimizing the cooling oil flow distribution within the motor assembly. Central composite design methodology and multi-objective genetic algorithm were employed to achieve the optimal design parameters. The optimal design configuration significantly improved heat dissipation at maximum speed and effectively reduced the temperatures of critical components.

APPLIED THERMAL ENGINEERING (2022)

添加到收藏夹

Article Engineering, Electrical & Electronic

Electromagnetic thermal coupling analysis for a novel cooling system of an axial flux hub motor

Jiujian Chang et al.

Summary: The paper introduces a novel cooling system for a YASA motor used in-wheel traction, which optimizes the height of the fins to increase output power through finite element analysis and magneto-thermal coupling method. The measured data matched well with the analysis results.

IET ELECTRIC POWER APPLICATIONS (2022)

添加到收藏夹

Article Energy & Fuels

A Performance Evaluation of Three-Phase Induction Electric Motors between 1945 and 2020

Danilo Ferreira de Souza et al.

Summary: The three-phase induction motor played a central role in increasing productivity during the second industrial revolution and remains the main load on electrical systems globally. This study analyzes the performance changes in squirrel-cage rotor three-phase induction electric motors (SCIMs) over the years, confirming significant performance gains of above 10% in some cases. Technological innovations in insulating materials, cooling, bearings, and design contributed to the improvements in motor performance. The study also highlights the impact of minimum energy performance standards (MEPS) on SCIM performance over the last three decades.

ENERGIES (2022)

添加到收藏夹

Article Energy & Fuels

Numerical Analysis of Wick-Type Two-Phase Mechanically Pumped Fluid Loop for Thermal Control of Electric Aircraft Motors

Xinyu Chang et al.

Summary: This paper proposes a wick-type two-phase mechanically pumped fluid loop system for future electric aircraft, and validates its operating characteristics and feasibility through numerical modeling.

ENERGIES (2022)

添加到收藏夹

Article Green & Sustainable Science & Technology

Total CO2-equivalent life-cycle emissions from commercially available passenger cars

Johannes Buberger et al.

Summary: This paper compares the total life-cycle greenhouse gas emissions of commercially available passenger cars with different powertrains and energy sources. The results show that conventional gasoline and diesel vehicles emit the highest amount of emissions, while vehicles powered by green electricity, biogas, and fuel cells can significantly reduce emissions.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2022)

添加到收藏夹

Article Energy & Fuels

Development of an external rotor surface permanent magnet machine with high continuous torque density

Ye Li et al.

Summary: This paper optimizes the electromagnetic and thermal performance of an externally rotor surface permanent magnet (SPM) machine under space limitation. By improving the heat dissipation structure, the overall temperature rise of the SPM motor is reduced, leading to a 25.2% increase in continuous torque at a winding temperature of 140 degrees Celsius.

ENERGY REPORTS (2022)

添加到收藏夹

Article Engineering, Multidisciplinary

Thermal Performance Improvement by Rotating Thermosyphon Loop in Rotor of an Interior Permanent Magnet Synchronous Electric Motor

Pey Shey Wu et al.

Summary: This study proposes the use of rotating thermosyphon loops in the rotor of an electric motor to improve its cooling performance and increase the power-to-weight ratio. By measuring the thermal conductivity and heat-transfer rate of the thermosyphon loop, the thermal boundary conditions for simulating the temperature fields of the electric motors are defined. The combination of the high thermal conductivity of the thermosyphon loop and the heat convection enhancement in the air chamber effectively improves the heat transmission and reduces the temperature gradients in the rotor. At specific rotor speeds and electrical currents, the thermosyphon loops can significantly reduce the maximum temperatures in the rotor, demonstrating the effectiveness of the phase-change cooling device.

INVENTIONS (2022)

添加到收藏夹

Article Thermodynamics

Comparison of electro-thermal performance of advanced cooling techniques for electric vehicle motors

Amitav Tikadar et al.

Summary: This paper investigates the performance of four different cooling technologies on BMW i3 motor, finding that the direct winding heat exchanger approach provides better electro-thermal performance compared to other techniques. However, the embedded rectangular and circular channels in the stator core negatively impact the electromagnetic performance and overall efficiency of the motor.

APPLIED THERMAL ENGINEERING (2021)

添加到收藏夹

Article

Smart Cooling System Design for Augmentation of Cooling Performance of Electric Vehicle Driving Motor Utilizing Cooling Channel Fin

Si-Mok Park et al.

Journal of the Korean Society for Precision Engineering (2021)

添加到收藏夹

Review Engineering, Multidisciplinary

A review on methods of finding losses and cooling methods to increase efficiency of electric machines

Edison Gundabattini et al.

Summary: This paper reviews the performance and losses of electric motors in terms of heat and temperature, factors affecting efficiency, computer aided analyses, temperature distribution in induction motors, and different cooling methods. Future research directions include cryogenic cooling, heat pipes, and phase change materials.

AIN SHAMS ENGINEERING JOURNAL (2021)

添加到收藏夹

Article Thermodynamics

A new phase-change cooling method for the frequent start-stop electric motor

Xiangyang Liu et al.

Summary: A new phase-change cooling method is proposed for frequent start-stop electric motor, which can significantly reduce the motor temperature when choosing the appropriate PCM according to the analysis results.

APPLIED THERMAL ENGINEERING (2021)

添加到收藏夹

Article Thermodynamics

A passive cooling design for an aircraft electromechanical actuator by using heat pipes

Wenlei Lian et al.

Summary: The increasing use of electric aircraft with fly-by-wire technology is a developing trend for future aircraft, where electromechanical actuators (EMAs) play a crucial role in power-by-wire systems. This paper proposes a passive cooling design using heat pipes to transfer heat from EMAs to fuel tanks, and experimentally investigates the heat generation characteristics and cooling performance of EMAs. The results demonstrate that the passive cooling device efficiently reduces the temperature rise of the motor under different operation conditions, laying a foundation for the cooling design of EMAs in aircraft.

APPLIED THERMAL ENGINEERING (2021)

添加到收藏夹

Article Engineering, Mechanical

Reliability study of motor controller in electric vehicle by the approach of fault tree analysis

Xiong Shu et al.

Summary: This study addresses the reliability issues of motor controllers in pure electric vehicles, by developing a fault tree and estimating failure rates of individual components to fill the knowledge gap in previous research. The most vulnerable components in the motor controller are identified and the degradation of the entire motor controller over time is observed. These findings are expected to have significant implications for future reliability design and maintenance of pure electric vehicles, and provide a deeper understanding of the reliability of electric vehicles for the industry and interested readers.

ENGINEERING FAILURE ANALYSIS (2021)

添加到收藏夹

Article Engineering, Electrical & Electronic

Improvement of Traction Motor Performance for Electric Vehicles Using Conductors With Insulation of High Thermal Conductivity Considering Cooling Methods

Thanh Anh Huynh et al.

Summary: This study enhances the performance of traction motors for electric vehicles by using conductors with high thermal conductivity insulation combined with suitable cooling methods, and validates the effectiveness of forced cooling.

IEEE TRANSACTIONS ON MAGNETICS (2021)

添加到收藏夹

Article Thermodynamics

Heat Dissipation of Three Permanent Magnet Synchronous Motors Integrated with Heat Pipes

Xiaowu Wang et al.

Summary: Three new types of PMSM motors were designed to reduce end winding temperature by optimizing heat pipes and cooling water channels. The results showed that new PMSM b exhibited the best heat transfer capacity among the traditional PMSM and the three new PMSMs.

INTERNATIONAL JOURNAL OF THERMOPHYSICS (2021)

添加到收藏夹

Article Thermodynamics

Thermal performance of a R600a two-phase loop thermosiphon in rotational shaft

Fajing Li et al.

Summary: An implementation of a cooling structure using Two-Phase Loop Thermosiphons (TPLTs) was developed to cool the shaft in a motorized spindle, which effectively reduced the temperature rise of the shaft and shortened the time required to achieve thermal equilibrium. The heat transfer performance of the TPLTs increased with increasing rotational speed, and the liquid fill ratio corresponding to the minimum thermal resistance tended to decrease with increasing rotational speeds.

HEAT AND MASS TRANSFER (2021)

添加到收藏夹

Article Engineering, Multidisciplinary

Direct Oil Cooling of End-Windings in Torus-Type Axial-Flux Permanent-Magnet Machines

Federico Marcolini et al.

Summary: This paper proposes a novel direct oil cooling system for Torus-type axial-flux permanent-magnet machines, and demonstrates its effectiveness through lumped thermal equivalent circuit simulations, finite element analyses, and experimental tests. The expected performances of the machine with the proposed cooling system are compared to those achieved using state-of-the-art water cooling.

IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS (2021)

添加到收藏夹

Article Energy & Fuels

Research on energy saving and thermal management of high-efficiency and high-voltage motor based on fluid network decoupling

Mengmeng Ai et al.

Summary: By establishing a global fluid-solid coupling model, optimizing the cooling effect of the high-voltage motor can reduce the maximum temperature of the motor, improve the power level, and achieve the purpose of energy saving.

ENERGY REPORTS (2021)

添加到收藏夹

Article Thermodynamics

Heat dissipation analysis and multi-objective optimization of a permanent magnet synchronous motor using surrogate assisted method

Yongsheng Li et al.

Summary: A cooling system utilizing internal oil circulation and external water circulation was proposed for heat dissipation of PMSM, with an optimization framework developed to find the best parameters. Through various methods, the motor heat dissipation was effectively improved, demonstrating the practical significance of the optimization framework.

CASE STUDIES IN THERMAL ENGINEERING (2021)

添加到收藏夹

Article Energy & Fuels

A Novel Stator Cooling Structure for Yokeless and Segmented Armature Axial Flux Machine with Heat Pipe

Wei Le et al.

Summary: This study investigates the application of heat pipes in electric motor thermal management, introducing a novel stator cooling structure that combines heat pipes with water cooling. Experimental and computational results confirm that this structure can significantly reduce stator temperatures.

ENERGIES (2021)

添加到收藏夹

Article Engineering, Multidisciplinary

Additively Manufactured Hollow Conductors Integrated With Heat Pipes: Design Tradeoffs and Hardware Demonstration

Fan Wu et al.

Summary: This article investigates the design of a 250 kW permanent magnet machine for aircraft propulsion, aiming for high specific power, high efficiency, and low thermal resistance direct-cooling design. The key enabling technology proposed is additively manufactured hollow conductors integrated with heat pipes. Parametric finite-element analysis and tradeoff studies on winding configurations and geometrical parameters were conducted to highlight their impact on specific power, winding ac losses, and efficiency.

IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS (2021)

添加到收藏夹

Proceedings Paper Construction & Building Technology

Fatigue life prediction of Electric RaceAbout (ERA) traction motor rotor

Sanjin Braut et al.

Summary: The automotive industry is shifting towards electric vehicles, requiring electric traction motors with high power density, efficiency, and reliability. The permanent magnet synchronous motor (PMSM) was originally designed for electric sports cars, with reliability assessment conducted through fatigue life analysis under various stress conditions.

4TH INTERNATIONAL CONFERENCE ON STRUCTURAL INTEGRITY AND DURABILITY (ICSID 2020) (2021)

添加到收藏夹

Article Energy & Fuels

Thermal capability of electric vehicle PMSM with different slot areas via thermal network analysis

Emma Arfa Grunditz et al.

Summary: The paper evaluates and quantifies the impact of varied stator slot size on the efficiency and thermal capability of a permanent magnet synchronous machine for an electric vehicle. By decreasing the slot size while keeping other dimensions fixed, core losses reduce, winding losses increase, and a higher maximum torque is reached.

ETRANSPORTATION (2021)

添加到收藏夹

Article Engineering, Mechanical

Improvement on the heat dissipation of permanent magnet synchronous motor using heat pipe

Zhenping Wan et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING (2020)

添加到收藏夹

Article Thermodynamics

Self-circulation cooling structure design of permanent magnet machines for electric vehicle

Ming Kang et al.

APPLIED THERMAL ENGINEERING (2020)

添加到收藏夹

Article Thermodynamics

Performance evaluation of an electric vehicle thermal management system with waste heat recovery

Zhen Tian et al.

APPLIED THERMAL ENGINEERING (2020)

添加到收藏夹

Article Physics, Multidisciplinary

On Heat Transfer Performance of Cooling Systems Using Nanofluid for Electric Motor Applications

Ali Deris Zadeh et al.

ENTROPY (2020)

添加到收藏夹

Article Energy & Fuels

Wound field synchronous motor with hybrid circuit for neighborhood electric vehicle traction improving fuel economy

Kyoung-Soo Cha et al.

APPLIED ENERGY (2020)

添加到收藏夹

Article Thermodynamics

Experimental and numerical investigation on a novel heat pipe based cooling strategy for permanent magnet synchronous motors

Yalong Sun et al.

APPLIED THERMAL ENGINEERING (2020)

添加到收藏夹

Article Thermodynamics

Hybrid electric vehicle electric motors for optimum energy efficiency: A computationally efficient design

Dong Wei et al.

ENERGY (2020)

添加到收藏夹

Review Green & Sustainable Science & Technology

Configuration, design, and optimization of air-cooled battery thermal management system for electric vehicles: A review

A. Hakeem Akinlabi et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2020)

添加到收藏夹

Article Engineering, Multidisciplinary

Cooling of Windings in Electric Machines via 3-D Printed Heat Exchanger

William Sixel et al.

IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS (2020)

添加到收藏夹

Review Energy & Fuels

A comprehensive review of future thermal management systems for battery-electrified vehicles

Joris Jaguemont et al.

JOURNAL OF ENERGY STORAGE (2020)

添加到收藏夹

Article Thermodynamics

Efficiency improvement of permanent magnet synchronous motor for electric vehicles

Yang Yang et al.

ENERGY (2020)

添加到收藏夹

Article Engineering, Electrical & Electronic

Innovated Approach of Predictive Thermal Management for High-Speed Propulsion Electric Machines in More Electric Aircraft

Tenghui Dong et al.

IEEE TRANSACTIONS ON TRANSPORTATION ELECTRIFICATION (2020)

添加到收藏夹

Article Energy & Fuels

Thermal management analysis using heat pipe in the high current discharging of lithium-ion battery in electric vehicles

Hamidreza Behi et al.

JOURNAL OF ENERGY STORAGE (2020)

添加到收藏夹

Article Engineering, Electrical & Electronic

Improved hotspot monitoring method for thermal management system of automotive traction motor

Tenghui Dong et al.

IET ELECTRIC POWER APPLICATIONS (2020)

添加到收藏夹

Article Automation & Control Systems

Cooling of Automotive Traction Motors: Schemes, Examples, and Computation Methods

Yaohui Gai et al.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2019)

添加到收藏夹

Article Automation & Control Systems

Improved Thermal Management and Analysis for Stator End-Windings of Electrical Machines

Vincenzo Madonna et al.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2019)

添加到收藏夹

Article Thermodynamics

Applicability study of the potting material based thermal management strategy for permanent magnet synchronous motors

Yalong Sun et al.

APPLIED THERMAL ENGINEERING (2019)

添加到收藏夹

Review Thermodynamics

Review on battery thermal management system for electric vehicles

Jaewan Kim et al.

APPLIED THERMAL ENGINEERING (2019)

添加到收藏夹

Article Engineering, Mechanical

Study of thermal stresses developed during a fatigue test on an electrical motor rotor cage

Vicente Climente-Alarcon et al.

INTERNATIONAL JOURNAL OF FATIGUE (2019)

添加到收藏夹

Article Multidisciplinary Sciences

The impact of demagnetization on the feasibility of permanent magnet synchronous motors in industry applications

A. A. Adly et al.

JOURNAL OF ADVANCED RESEARCH (2019)

添加到收藏夹

Article Thermodynamics

Design and optimization of dual-cycled cooling structure for fully-enclosed permanent magnet motor

Wei Chen et al.

APPLIED THERMAL ENGINEERING (2019)

添加到收藏夹

Article Thermodynamics

Thermal characteristics and effects of oil spray cooling on in-wheel motors in electric vehicles

Myeong Hyeon Park et al.

APPLIED THERMAL ENGINEERING (2019)

添加到收藏夹

Article Thermodynamics

Thermal management integrated with three-dimensional heat pipes for air-cooled permanent magnet synchronous motor

Guoyun Fang et al.

APPLIED THERMAL ENGINEERING (2019)

添加到收藏夹

Article Energy & Fuels

Assessment of Different Cooling Techniques for Reduced Mechanical Stress in the Windings of Electrical Machines

Bishal Silwal et al.

ENERGIES (2019)

添加到收藏夹

Article Engineering, Electrical & Electronic

A Hybrid Electric Vehicle Motor Cooling System-Design, Model, and Control

Junkui Huang et al.

IEEE TRANSACTIONS ON VEHICULAR TECHNOLOGY (2019)

添加到收藏夹

Article Engineering, Multidisciplinary

Direct Liquid Cooling Method Verified With a Permanent-Magnet Traction Motor in a Bus

Pia Lindh et al.

IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS (2019)

添加到收藏夹

Article Thermodynamics

Numerical and experimental analysis of heat dissipation intensification from electric motor

B. Melka et al.

ENERGY (2019)

添加到收藏夹

Article Green & Sustainable Science & Technology

Market entry strategies for electric vehicle start-ups in the automotive industry - Lessons from Tesla Motors

V. J. Thomas et al.

JOURNAL OF CLEANER PRODUCTION (2019)

添加到收藏夹

Proceedings Paper Energy & Fuels

A review of Energy Efficiency Measures Within Electric Motors Systems

Andrea Trianni et al.

INNOVATIVE SOLUTIONS FOR ENERGY TRANSITIONS (2019)

添加到收藏夹

Article Thermodynamics

Air inlet/outlet arrangement for rotor cooling application of axial flux PM machines

A. S. Fawzal et al.

APPLIED THERMAL ENGINEERING (2018)

添加到收藏夹

Article Thermodynamics

Experimental investigation of single loop thermosyphons utilized in motorized spindle shaft cooling

Fajing Li et al.

APPLIED THERMAL ENGINEERING (2018)

添加到收藏夹

Article Engineering, Electrical & Electronic

An innovative natural air-cooling system technique for temperature-rise suppression on the permanent magnet synchronous machines

Pedram Asef et al.

ELECTRIC POWER SYSTEMS RESEARCH (2018)

添加到收藏夹

Article Energy & Fuels

Three-D Numerical Thermal Analysis of Electric Motor with Cooling Jacket

Zabdur Rehman et al.

ENERGIES (2018)

添加到收藏夹

Article Engineering, Multidisciplinary

Design Optimization of a High Torque Density Spoke-Type PM Motor for a Formula E Race Drive Cycle

Alireza Fatemi et al.

IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS (2018)

添加到收藏夹

Article Energy & Fuels

Design and Optimization of a Novel Wound Field Synchronous Machine for Torque Performance Enhancement

Wenping Chai et al.

ENERGIES (2018)

添加到收藏夹

Article Thermodynamics

CFD analyses of a radial fan for electric motor cooling

E. Galloni et al.

THERMAL SCIENCE AND ENGINEERING PROGRESS (2018)

添加到收藏夹

Proceedings Paper Energy & Fuels

Thermal performance of Pulsating Heat Pipe on Electric Motor as Cooling Application

Nurhalimah Aprianingsih et al.

3RD INTERNATIONAL TROPICAL RENEWABLE ENERGY CONFERENCE SUSTAINABLE DEVELOPMENT OF TROPICAL RENEWABLE ENERGY (I-TREC 2018) (2018)

添加到收藏夹

Article Engineering, Multidisciplinary

Water Cold Plates Cooling in a Permanent Magnet Synchronous Motor

Aurelie Fasquelle et al.

IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS (2017)

添加到收藏夹

Article Engineering, Multidisciplinary

Fan Performance Analysis for Rotor Cooling of Axial Flux Permanent Magnet Machines

Ahmad Syahid Fawzal et al.

IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS (2017)

添加到收藏夹

Article Thermodynamics

Thermal performance analysis of a 30 kW switched reluctance motor

Han-Chieh Chiu et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2017)

添加到收藏夹

Review Chemistry, Physical

A review on battery thermal management in electric vehicle application

Guodong Xia et al.

JOURNAL OF POWER SOURCES (2017)

添加到收藏夹

Proceedings Paper Engineering, Industrial

Modeling of Motor-Spindel Thermal Values

L. Nikitina

INTERNATIONAL CONFERENCE ON INDUSTRIAL ENGINEERING (ICIE 2017) (2017)

添加到收藏夹

Article Thermodynamics

Electric motor thermal management system using L-shaped flat heat pipes

Nandy Putra et al.

APPLIED THERMAL ENGINEERING (2017)

添加到收藏夹

Article Thermodynamics

Fully predictive heat transfer coefficient modeling of an axial flux permanent magnet synchronous machine with geometrical parameters of the magnets

Alireza Rasekh et al.

APPLIED THERMAL ENGINEERING (2017)

添加到收藏夹

Article Thermodynamics

Effect of air-gap fans on cooling of windings in a large-capacity, high-speed induction motor

Chiwon Kim et al.

APPLIED THERMAL ENGINEERING (2016)

添加到收藏夹

Article Thermodynamics

Development of an interior permanent magnet motor through rotor cooling for electric vehicles

Kea-Ho Lee et al.

APPLIED THERMAL ENGINEERING (2016)

添加到收藏夹

Article Thermodynamics

Transient cooling effect analyses for a permanent-magnet synchronous motor with phase-change-material packaging

Shengnan Wang et al.

APPLIED THERMAL ENGINEERING (2016)

添加到收藏夹

Article Thermodynamics

Numerical simulation and experimental verification of heat transfer from a finned housing of an electric motor

Miroslaw Grabowski et al.

ENERGY CONVERSION AND MANAGEMENT (2016)

添加到收藏夹

Article Thermodynamics

Experimental investigation of the thermal control effects of phase change material based packaging strategy for on-board permanent magnet synchronous motors

Ji-Xiang Wang et al.

ENERGY CONVERSION AND MANAGEMENT (2016)

添加到收藏夹

Article Energy & Fuels

Direct Liquid Cooling in Low-Power Electrical Machines: Proof-of-Concept

Pia M. Lindh et al.

IEEE TRANSACTIONS ON ENERGY CONVERSION (2016)

添加到收藏夹

Article Thermodynamics

Experimental study of oil cooling systems for electric motors

Tanguy Davin et al.

APPLIED THERMAL ENGINEERING (2015)

添加到收藏夹

Article Thermodynamics

Heat-transfer improvements in an axial-flux permanent-magnet synchronous machine

Juha Pyrhonen et al.

APPLIED THERMAL ENGINEERING (2015)

添加到收藏夹

Article Thermodynamics

Thermal effects of stator potting in an axial-flux permanent magnet synchronous generator

Mariia Polikarpova et al.

APPLIED THERMAL ENGINEERING (2015)

添加到收藏夹

Article Automation & Control Systems

Hybrid Cooling Method of Axial-Flux Permanent-Magnet Machines for Vehicle Applications

M. Polikarpova et al.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2015)

添加到收藏夹

Article Engineering, Multidisciplinary

Modeling and Investigation of Thermal Characteristics of a Water-Cooled Permanent-Magnet Linear Motor

Qinfen Lu et al.

IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS (2015)

添加到收藏夹

Review Green & Sustainable Science & Technology

Limitations/capabilities of electric machine technologies and modeling approaches for electric motor design and analysis in plug-in electric vehicle applications

Murat Yilmaz

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2015)

添加到收藏夹

Article Engineering, Multidisciplinary

Modeling and analysis of switched reluctance generator using finite element method

B. Ganji et al.

AIN SHAMS ENGINEERING JOURNAL (2015)

添加到收藏夹

Article Thermodynamics

Numerical study on electromagnetics and thermal cooling of a switched reluctance motor

Jer-Huan Jang et al.

CASE STUDIES IN THERMAL ENGINEERING (2015)

添加到收藏夹

Article Thermodynamics

Thermal performance of oil spray cooling system for in-wheel motor in electric vehicles

Dong Hyun Lim et al.

APPLIED THERMAL ENGINEERING (2014)

添加到收藏夹

Article Engineering, Electrical & Electronic

Condition Monitoring and Diagnostics of Motor and Stator Windings - A Review

G. C. Stone

IEEE TRANSACTIONS ON DIELECTRICS AND ELECTRICAL INSULATION (2013)

添加到收藏夹

Article Engineering, Multidisciplinary

A Thermal Improvement Technique for the Phase Windings of Electrical Machines

Michael Galea et al.

IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS (2012)

添加到收藏夹

Review Engineering, Electrical & Electronic

Electrical Motor Drivelines in Commercial All-Electric Vehicles: A Review

Juan de Santiago et al.

IEEE TRANSACTIONS ON VEHICULAR TECHNOLOGY (2012)

添加到收藏夹

Proceedings Paper Engineering, Industrial

Research on a novel Rotor Structure Switched Reluctance Motor

Lingquan Zeng et al.

INTERNATIONAL CONFERENCE ON APPLIED PHYSICS AND INDUSTRIAL ENGINEERING 2012, PT A (2012)

添加到收藏夹

Proceedings Paper Energy & Fuels

Research on Induction Motor for Mini Electric Vehicles

Cheng Shukang et al.

2012 INTERNATIONAL CONFERENCE ON FUTURE ELECTRICAL POWER AND ENERGY SYSTEM, PT A (2012)

添加到收藏夹

Article Engineering, Multidisciplinary

Measurement and CFD Prediction of Heat Transfer in Air-Cooled Disc-Type Electrical Machines

David A. Howey et al.

IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS (2011)

添加到收藏夹

Article Engineering, Multidisciplinary

Thermal Modeling of a Segmented Stator Winding Design

Rafal Wrobel et al.

IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS (2011)

添加到收藏夹

Article Engineering, Electrical & Electronic

A Real-Time Thermal Model of a Permanent-Magnet Synchronous Motor

Georgios D. Demetriades et al.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2010)

添加到收藏夹

Article Thermodynamics

Radially resolved measurement of stator heat transfer in a rotor-stator disc system

D. A. Howey et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2010)

添加到收藏夹

Article Thermodynamics

Cooling of a permanent magnet electric motor with a centrifugal impeller

Hongmin Li

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2010)

添加到收藏夹

Review Green & Sustainable Science & Technology

Design, demonstrations and sustainability impact assessments for plug-in hybrid electric vehicles

Thomas H. Bradley et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2009)

添加到收藏夹

Article Thermodynamics

Computational analysis of temperature rise phenomena in electric induction motors

Y Huai et al.

APPLIED THERMAL ENGINEERING (2003)

添加到收藏夹

Article Thermodynamics

Experimental study of the cooling of a closed type electric motor

K Farsane et al.

APPLIED THERMAL ENGINEERING (2000)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.