☆ 4.6 Article

Experimental Study on Post-Grouting Pile Vertical Bearing Performance Considering Different Grouting Methods and Parameters in Cohesive Soil

APPLIED SCIENCES-BASEL (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Geological

An analysis method for the response of combined side-and-tip grouting pile

Shan-wei Liu et al.

Summary: Post-grouting technology is commonly used to enhance the ultimate bearing capacity and reduce the settlement of bored piles. A load transfer model considering the time-varying characteristics of slurry viscosity was established for the analysis of the combined side-and-tip grouting pile in layered soils. The reliability of the calculation method was validated through comparisons between measured and computed results of well-documented cases, and a parameter study was conducted to assess the influence of various factors on the load-settlement relationship of single piles with different grouting types.

ACTA GEOTECHNICA (2023)

添加到收藏夹

Article Engineering, Multidisciplinary

Evaluating the effect of post-grouting on long bored pile based on ultra-weak fiber Bragg grating array

Xing Zheng et al.

Summary: This paper presents a novel sensing cable and system based on ultra-weak FBG array for strain measurement of large-scale engineering structures. The good strain measurement performance of the sensing cable and system was confirmed through laboratory calibration and field tests. The UWFBG array and sensing system could realize distributed, high-precision, and real-time strain measurement with a spatial resolution of 1 m within 1.5 km, which has great potential in the monitoring of geo-environment and engineering structures.

MEASUREMENT (2023)

添加到收藏夹

Article Engineering, Marine

Effects of soil unloading and grouting on the vertical bearing mechanism for compressive piles

Yue Wu et al.

Summary: The present study conducts a series of model cast-in-place piles tests to analyze the vertical bearing characteristics and the grout returned diffusion mechanism along the pile shaft of tip post-grouting piles with different grouting and pile shaft soil unloading conditions. The model test results show that the pile tip post-grouting technology can improve the weak difference in the bearing characteristics and axial force distribution of the pile foundation caused by pile shaft soil unloading. The grouting diffusion mechanism of the cement on the pile tip and pile shaft soil during the pile tip post-grouting process is revealed.

OCEAN ENGINEERING (2023)

添加到收藏夹

Article Engineering, Geological

Cavity reverse expansion considering elastoplastic unloading and application in cast-in-situ bored piles

Chunfeng Zhao et al.

Summary: The construction process of a cast-in-situ bored pile is too complex to be described by a single process of cavity expansion theory. A unified semi-analytical solution is proposed for the reverse expansion of both cylindrical and spherical cavities in drained soil. The effects of unloading on cavity reverse expansion and the recovery of cavity radius are analyzed.

SOILS AND FOUNDATIONS (2023)

添加到收藏夹

Article Engineering, Geological

Numerical simulation of load tests on hollow-bar micropiles considering grouting method

Hamed Bayesteh et al.

Summary: In this study, numerical modeling was used to evaluate the design parameters and the effect of grouting method on hollow-bar micropiles. The results showed an increase in bond diameter and bond strength compared to current recommendations for hollow-bar micropiles. An equation to predict the bond diameter of hollow-bar micropiles was also developed.

PROCEEDINGS OF THE INSTITUTION OF CIVIL ENGINEERS-GEOTECHNICAL ENGINEERING (2022)

添加到收藏夹

Article Engineering, Geological

Analysis of Shaft-Grouted Piles Using Load-Transfer Method

Van Qui Lai et al.

Summary: A new algorithm based on the load-transfer method is proposed in this study to determine the behavior of shaft-grouted piles. The proposed method shows good agreement with full-scale pile load test results and can be applied in the preliminary design of such piles, which is of great interest to practical engineers.

INTERNATIONAL JOURNAL OF GEOSYNTHETICS AND GROUND ENGINEERING (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Axial Bearing Mechanism of Post-Grouted Piles in Calcareous Sand

Zhihui Wan et al.

Summary: This paper investigates the response of post-grouted piles subjected to axial load in calcareous sand through model tests. The results show that post-grouted piles in calcareous sand can provide higher bearing capacity, with ideal-geometry grouting showing better performance.

APPLIED SCIENCES-BASEL (2022)

添加到收藏夹

Article Engineering, Civil

3D response surface modeling based in-situ assessment of physico-mechanical characteristics of alluvial soils using dynamic cone penetrometer

Usama Khalid et al.

Summary: The study aims to assess the physico-mechanical characteristics of alluvial soils using dynamic cone penetrometer (DCP) test results. Regression-based models and three-dimensional response surface models were developed to predict various soil properties, with the latter showing lower error rates.

TRANSPORTATION GEOTECHNICS (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

A Novel Method for Testing the Effect of Base Post-Grouting of Super-Long Piles

Haibo Hu et al.

Summary: This study introduced a novel method to test the effect of base post-grouting of super-long piles, and the test results showed that the strength and bearing capacity of the soil below the pile base were significantly improved after base post-grouting.

APPLIED SCIENCES-BASEL (2022)

添加到收藏夹

Article Engineering, Geological

Axial Behavior of Pressure Grouted Helical Piles Installed in Marine Soft Clay Based on Full-Scale Field Tests

Yunhan Huang et al.

Summary: This study investigates the axial behavior of pressure grouted helical piles installed in marine soft clay through compression and tension tests. The results show that pressure grouted helical piles have higher pile resistance and overall axial capacities compared to un-grouted helical piles.

GEOTECHNICAL AND GEOLOGICAL ENGINEERING (2022)

添加到收藏夹

Article Engineering, Geological

Consolidation Pressure Consequences on the Soil Structure of Artificial Structured Marine Clay: Macro and Micro Evaluation

Usama Khalid et al.

Summary: Consolidation pressure significantly affects the structure of marine clay, including void ratio, compression index, yield stress, and pore size distribution. With increasing consolidation pressure, the total pore volume decreases, and medium pores larger than 1 μm decrease, transforming into fine and micro pores between 1 μm and 0.01 μm in size.

GEOTECHNICAL AND GEOLOGICAL ENGINEERING (2021)

添加到收藏夹

Article Engineering, Geological

Load-Displacement Relationship of Single Piles in Clay Considering Different Tip Grouting Volumes and Grouting Returned Heights

C. F. Zhao et al.

INTERNATIONAL JOURNAL OF GEOMECHANICS (2020)

添加到收藏夹

Article Engineering, Geological

Shear behaviour of sand-concrete interface with side post-grouting considering the unloading effect

Yi Fei et al.

SOILS AND FOUNDATIONS (2020)

添加到收藏夹

Article Engineering, Geological

Behavior of zeolite-cement grouted sand under triaxial compression test

Peyman Jafarpour et al.

JOURNAL OF ROCK MECHANICS AND GEOTECHNICAL ENGINEERING (2020)

添加到收藏夹

Article Engineering, Geological

Field study on post-grouting effects of cast-in-place bored piles in extra-thick fine sand layers

Zhi-hui Wan et al.

ACTA GEOTECHNICA (2019)

添加到收藏夹

Article Construction & Building Technology

Penetrability prediction of microfine cement grout in granular soil using Artificial Intelligence techniques

Ruhul Amin Mozumder et al.

TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY (2018)

添加到收藏夹

Article Engineering, Geological

Finite Element Modeling of Compaction Grouting on its Densification and Confining Aspects

Neha Shrivastava et al.

GEOTECHNICAL AND GEOLOGICAL ENGINEERING (2018)

添加到收藏夹

Article Engineering, Geological

Experimental study, numerical modeling of and axial prediction approach to base grouted drilled shafts in cohesionless soils

Sudheesh Thiyyakkandi et al.

ACTA GEOTECHNICA (2014)

添加到收藏夹

Article Engineering, Geological

Measured and Predicted Response of a New Jetted and Grouted Precast Pile with Membranes in Cohesionless Soils

Sudheesh Thiyyakkandi et al.

JOURNAL OF GEOTECHNICAL AND GEOENVIRONMENTAL ENGINEERING (2013)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Numerical analysis on post-grouted drilled shafts: A case study at the Brazo River Bridge, TX

Heejung Youn et al.

COMPUTERS AND GEOTECHNICS (2010)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

A model for in situ grouting with account for particle filtration

S. Maghous et al.

COMPUTERS AND GEOTECHNICS (2007)

添加到收藏夹

Article Engineering, Geological

Evaluation of elementary filtration properties of a cement grout injected in a sand

Zied Saada et al.

CANADIAN GEOTECHNICAL JOURNAL (2006)

添加到收藏夹

Article Engineering, Geological

Predicting end bearing capacity of post-grouted drilled shaft in cohesionless soils

G Mullins et al.

JOURNAL OF GEOTECHNICAL AND GEOENVIRONMENTAL ENGINEERING (2006)

添加到收藏夹

Article Engineering, Geological

Modelling of cement suspension flow in granular porous media

Z Saada et al.

INTERNATIONAL JOURNAL FOR NUMERICAL AND ANALYTICAL METHODS IN GEOMECHANICS (2005)

添加到收藏夹

Article Engineering, Geological

Construction effect on load transfer along bored piles

MF Chang et al.

JOURNAL OF GEOTECHNICAL AND GEOENVIRONMENTAL ENGINEERING (2004)

添加到收藏夹

Article Engineering, Chemical

Experimental determination of the longitudinal dispersivity during the injection of a micro-cement grout in a one-dimensional soil column

F Bouchelaghem et al.

TRANSPORT IN POROUS MEDIA (2003)

添加到收藏夹

Article Engineering, Geological

An analytical solution for transient flow of Bingham viscoplastic materials in rock fractures

B Amadei et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2001)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.