☆ 4.6 Article

Antireflection Property and Corrosion Resistance of Black Ceramic Superhydrophobic Coatings on Aluminum Alloy

ADVANCED ENGINEERING MATERIALS (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Chemistry, Physical

Cleaning Strategies of Synthesized Bioactive Coatings by PEO on Ti-6Al-4V Alloys of Organic Contaminations

Avital Schwartz et al.

Summary: This research studied the impact of various cleaning methods on coating morphology and their effectiveness in removing organic contaminants. Bioactive coatings containing titanium oxides and hydroxyapatite were obtained through plasma electrolytic oxidation. The results showed that samples obtained from molten salt had a finer crystalline structure compared to those obtained from aqueous electrolytes. After applying surface cleaning methods, the carbon content decreased, indicating a reduction in organic contaminations. The most effective and moderate cleaning method was ozone treatment.

MATERIALS (2023)

添加到收藏夹

Article Materials Science, Coatings & Films

Facile preparation of superamphiphobic aluminum alloy surfaces and their corrosion resistance

Yuqiao Li et al.

Summary: In this study, liquid-repelling aluminum alloy surfaces with enhanced corrosion resistance were prepared through a one-step chemical etching and modification method. The fabricated surfaces exhibited excellent superamphiphobicity and improved anti-corrosion performance.

SURFACE & COATINGS TECHNOLOGY (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Fabrication of Robust, Anti-reflective, Transparent Superhydrophobic Coatings with a Micropatterned Multilayer Structure

Wenxin Luo et al.

Summary: In this study, transparent superhydrophobic coatings with a multilayer structure and micropatterns are developed, exhibiting durability, self-cleaning function, and anti-reflective property. These coatings demonstrate excellent water repellency in adverse conditions and can be integrated with non-flat geometries, showing great potential for diverse outdoor applications.

LANGMUIR (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Electrochemical Anodic Oxidation of Aluminum in the Presence of a Diamond Blend Obtained by Detonation of Tetryl

V. Yu Dolmatov et al.

Summary: This study investigates the process of anodic oxidation of aluminum and its alloys in the presence of a diamond blend. The results show that the use of a diamond blend can significantly improve the corrosion resistance, wear resistance, and hardness of the anodic oxidation coating compared to the coatings obtained through the standard process and electrolyte.

JOURNAL OF SUPERHARD MATERIALS (2022)

添加到收藏夹

Article Chemistry, Physical

Effect of SiC Content on Mechanical and Tribological Properties of Al2024-SiC Composites

Dipankar Dey et al.

Summary: This study focuses on the fabrication of aluminium matrix composites reinforced with micro SiC particulates by stir casting process and investigates the effect of SiC content on mechanical properties and wear behavior. The experimental results reveal that the addition of SiC improves the strength, hardness, and wear resistance of the composites. The prepared composites exhibit even distribution of reinforcement particulates and demonstrate enhanced mechanical and tribological properties.

SILICON (2022)

添加到收藏夹

Article Chemistry, Physical

Large-area surface wettability patterning of metal alloys via a maskless laser-assisted functionalization method

Avik Samanta et al.

Summary: An innovative laser-assisted functionalization method is proposed to fabricate a superhydrophobic-superhydrophilic patterned surface on a large-area metal alloy, with two different strategies demonstrated. Adjusting laser parameters allows for surface topography patterning and anti-reflection surface properties to be achieved. This method decouples extreme wettability from surface topography, showing simplicity, robustness, and feasibility.

APPLIED SURFACE SCIENCE (2021)

添加到收藏夹

Review Engineering, Civil

Aluminium alloys as structural material: A review of research

Evangelia Georgantzia et al.

Summary: This comprehensive review discusses research on the structural performance of aluminum alloys, covering experimental, numerical, and analytical work on mechanical properties, structural performance, and design. Additionally, the paper reviews the performance of connections and composite aluminum-concrete members.

ENGINEERING STRUCTURES (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Superhydrophobic Coatings with Photothermal Self-Healing Chemical Composition and Microstructure for Efficient Corrosion Protection of Magnesium Alloy

Jiaojiao Zhang et al.

Summary: The study introduces a superhydrophobic self-healing coating with photothermal chemical composition and microstructure for the corrosion protection of magnesium alloy. The coating exhibits good superhydrophobicity, photothermal effect, and corrosion resistance, and demonstrates excellent self-healing capability in response to chemical and microstructure damage.

LANGMUIR (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Insight into the localized strain effect on micro-galvanic corrosion behavior in AA7075-T6 aluminum alloy

Ni Li et al.

Summary: The research found that in the AA7075-T6 alloy, there were slight changes in the potential differences between the particles in the elastic deformation stage, while the changes were more significant in the plastic deformation stage, thereby affecting the pitting corrosion resistance of the aluminum alloy.

CORROSION SCIENCE (2021)

添加到收藏夹

Article Materials Science, Coatings & Films

Enhanced corrosion resistance of magnesium alloy by plasma electrolytic oxidation plus hydrothermal treatment

Jinhe Dou et al.

Summary: Plasma electrolytic oxidation (PEO) is an effective surface treatment technique for enhancing the corrosion resistance of Mg alloy, but the micro-pores and micro-cracks of the PEO coating can limit its protection capability. In this study, a dense Ca3Al2(OH)(12) layer was fabricated on the PEO coating surface using hydrothermal treatment (HT) to create a PEO/HT composite coating, which showed improved bioactivity and corrosion resistance compared to PEO coating and Mg alloy. The growth process of the Ca3Al2(OH)(12) layer on the PEO coating surface was discussed.

SURFACE & COATINGS TECHNOLOGY (2021)

添加到收藏夹

Article Chemistry, Analytical

Fabrication of Antireflection Micro/Nanostructures on the Surface of Aluminum Alloy by Femtosecond Laser

Mengdan Du et al.

Summary: By designing micro-nano structures on the surface of aluminum alloy and employing a two-step strategy, broadband antireflection structures with excellent light trapping properties were fabricated, suitable for applications in thermal photovoltaics and other fields.

MICROMACHINES (2021)

添加到收藏夹

Article Electrochemistry

Finite Element Modeling of Chemical and Electrochemical Protection Mechanisms Offered by Mg-Based Organic Coatings to AA2024-T351

C. V. Moraes et al.

Summary: A finite element model was developed to predict the protection mechanisms offered by Mg-based organic coatings on AA2024-T351 alloy. The critical pH value for corrosion potential decrease was in accordance with experimental observations. The model also calculated the feasibility of pH-induced repassivation mechanism under different water layer thickness and inhibition of oxygen reduction reaction. This framework can help identify chemical inhibitors that operate by the described chemical protection mode.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Role of Hafnium Doping on Wetting Transition Tuning the Wettability Properties of ZnO and Doped Thin Films: Self-Cleaning Coating for Solar Application

Srijita Nundy et al.

Summary: High-quality Hf-ZnO thin films were successfully synthesized with varying Hf contents, exhibiting superhydrophilic and ultrahydrophobic wetting behaviors. Hafnium doping plays a significant role in tuning the nanostructure morphology, surface roughness, defect formation, Lewis acid-base interactions, and wettability properties of the materials.

ACS APPLIED MATERIALS & INTERFACES (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Depth profiling approach to evaluate the influence of hot stamping on the local electrochemical behaviour and galvanic series of hot-dip Al-Si coating on 22MnB5 steel

Camila Pucci Couto et al.

Summary: The hot-stamping process has a significant impact on the corrosion properties of the Al-Si coating on 22MnB5 steel, with iron diffusion leading to different behaviors in various layers. The Al-rich layers exhibit active behavior, while the Fe/Si-rich sublayers act as a protective barrier for the steel substrate, showing passive behavior with nobler corrosion potentials and lower current densities.

CORROSION SCIENCE (2021)

添加到收藏夹

Article Polymer Science

Flake aluminum reinforced polyamideimide-polytetrafluoroethylene bonded solid lubricating composite coating for wear resistance and corrosion protection

Guihua Li et al.

Summary: A solid lubricating composite coating (PAI/PTFE/Al) with excellent tribological properties and corrosion resistance was prepared through a spraying process. Results showed that the coating containing 30 wt% flake aluminum exhibited optimal mechanical, tribological, and corrosion resistance properties. The improvement in tribological properties was attributed to the mechanical properties of aluminum flakes and lubricating properties of PTFE, while the enhanced corrosion resistance was due to the combined effects of PTFE's hydrophobic properties and aluminum flakes' shielding effect and cathodic protection.

EUROPEAN POLYMER JOURNAL (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Superhydrophobic and Self-Healing Mg-Al Layered Double Hydroxide/Silane Composite Coatings on the Mg Alloy Surface with a Long-Term Anti-corrosion Lifetime

Ying Wang et al.

Summary: A superhydrophobic composite coating based on LDHs was constructed on Mg alloy through laser treatment, in situ growth of LDHs, and modification with OTS, showing excellent corrosion resistance and long-term stability. This was attributed to the superhydrophobicity, compactness, ion-exchange capacity of LDH layer, and dense Si-O-Si network within the OTS layer.

LANGMUIR (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Comparison Study of Self-Cleaning, Anti-Icing, and Durable Corrosion Resistance of Superhydrophobic and Lubricant-Infused Ultraslippery Surfaces

Binbin Zhang et al.

Summary: By endowing metallic surfaces with special wettability and unique interfacial contacts, superhydrophobic and lubricant-infused ultraslippery surfaces were achieved, showing improved ice overdelay and corrosion-resisting performance. The lubricant-infused ultraslippery surfaces exhibit superior mechanical robustness and long-term corrosion resistance, offering better application potential under challenging service environments.

LANGMUIR (2021)

添加到收藏夹

Review Materials Science, Multidisciplinary

A review on additive manufacturing of Al-Cu (2xxx) aluminium alloys, processes and defects

Mohammad Saleh Kenevisi et al.

Summary: This review provides an insight into the state-of-the-art of Al-Cu alloys additive manufacturing, discussing processes, challenges, and approaches to improving the integrity and performance of manufactured parts, including techniques used and defects found.

MATERIALS SCIENCE AND TECHNOLOGY (2021)

添加到收藏夹

Review Engineering, Marine

A review on ultimate strength of aluminium structural elements and systems for marine applications

Omid Ferdowsi Hosseinabadi et al.

Summary: Aluminium alloys are widely used in the marine industry, particularly in the construction of high-speed vessels. However, the ultimate strength prediction methods developed for steel structures cannot be directly applied to aluminium alloys due to their different material behavior. Factors such as initial imperfections and boundary conditions have a significant impact on the ultimate strength of aluminium ship hull girder elements.

OCEAN ENGINEERING (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

A criterion to find crack-resistant aluminium alloys to avoid solidification cracking

Tayfun Soysal

Summary: Aluminium alloys are prone to solidification cracking, but a criterion using a cracking index and phase diagrams can determine their susceptibility and resistance to cracking. Adjusting the amount of filler metal based on this criterion can reduce the crack susceptibility of certain aluminium alloys.

SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Corrosion behavior of spangle on a batch hot-dip galvanized Zn-0.05Al-0.2Sb coating in 3.5 wt.% NaCl solution

Shu Peng et al.

CORROSION SCIENCE (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Hydrophilic and Superhydrophilic Self-Cleaning Coatings by Morphologically Varying ZnO Microstructures for Photovoltaic and Glazing Applications

Srijita Nundy et al.

ACS OMEGA (2020)

添加到收藏夹

Review Materials Science, Multidisciplinary

Microalloying Al alloys with Sc: a review

Jin-Yu Zhang et al.

RARE METALS (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Galvanic coupling effects on the corrosion behavior of the 6061 aluminum alloy used in research nuclear reactors

Mariana X. Milagre et al.

JOURNAL OF NUCLEAR MATERIALS (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Modification of surface hardness, wear resistance and corrosion resistance of cold spray Al coated AZ31B Mg alloy using cold spray double layered Ta/Ti coating in 3.5 wt % NaCl solution

M. Daroonparvar et al.

CORROSION SCIENCE (2020)

添加到收藏夹

Article Materials Science, Coatings & Films

Formation of ordered anodic alumina nanofibers during aluminum anodizing in oxalic acid at high voltage and electrical power

K. Chernyakova et al.

SURFACE & COATINGS TECHNOLOGY (2020)

添加到收藏夹

Article Chemistry, Physical

Fabrication of biomimetic superhydrophobic and anti-icing Ti6Al4V alloy surfaces by direct laser interference lithography and hydrothermal treatment

Ri Liu et al.

APPLIED SURFACE SCIENCE (2020)

添加到收藏夹

Article Chemistry, Physical

A simple two-step approach for the fabrication of bio-inspired superhydrophobic and anisotropic wetting surfaces having corrosion resistance

Zhongxu Lian et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

添加到收藏夹

Article Chemistry, Physical

Novel fluoridated hydroxyapatite/MAO composite coating on AZ31B magnesium alloy for biomedical application

Wentao Yu et al.

APPLIED SURFACE SCIENCE (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Tunable Bubble Assembling on a Hybrid Superhydrophobic-Superhydrophilic Surface Fabricated by Selective Laser Texturing

Ke Sun et al.

LANGMUIR (2018)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Investigation on the Tensile Strength and Microhardness of AA6061/TiC Composites by Stir Casting

J. Jebeen Moses et al.

TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS (2017)

添加到收藏夹

Article Optics

Fabrication of broadband antireflective black metal surfaces with ultra-light-trapping structures by picosecond laser texturing and chemical fluorination

Buxiang Zheng et al.

APPLIED PHYSICS B-LASERS AND OPTICS (2016)

添加到收藏夹

Article Engineering, Multidisciplinary

Microstructure, mechanical properties and corrosion behaviour of Al-Si-Mg alloy matrix/zircon and alumina hybrid composite

T. Satish Kumar et al.

FORSCHUNG IM INGENIEURWESEN-ENGINEERING RESEARCH (2015)

添加到收藏夹

Article Optics

Enhancing near-infrared light absorption in PtSi thin films for Schottky barrier IR detectors using moth-eye surface structures

Federico Lora Gonzalez et al.

OPTICS LETTERS (2015)

添加到收藏夹

Article Energy & Fuels

Broadband and omnidirectional highly-transparent coverglasses coated with biomimetic moth-eye nanopatterned polymer films for solar photovoltaic system applications

Jung Woo Leem et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2015)

添加到收藏夹

Article Multidisciplinary Sciences

Black metal thin films by deposition on dielectric antireflective moth-eye nanostructures

Alexander B. Christiansen et al.

SCIENTIFIC REPORTS (2015)

添加到收藏夹

Article Chemistry, Physical

Facile approach in the development of icephobic hierarchically textured coatings as corrosion barrier

C. Momen et al.

APPLIED SURFACE SCIENCE (2014)

添加到收藏夹

Article Chemistry, Physical

Microstructure and mechanical properties of 6061 Al alloy based composites with SiC nanoparticles

A. J. Knowles et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2014)

添加到收藏夹

Article Materials Science, Ceramics

Antireflective coatings prepared by sol-gel processing: Principles and applications

Walther Glaubitt et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2012)

添加到收藏夹

Review Chemistry, Multidisciplinary

Anti-reflective coatings: A critical, in-depth review

Hemant Kumar Raut et al.

ENERGY & ENVIRONMENTAL SCIENCE (2011)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.