相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。High mechanical properties of covalently functionalized carbon fiber and polypropylene composites by enhanced interfacial adhesion derived from rationally designed polymer compatibilizers
Heun Young Seo et al.
COMPOSITES PART B-ENGINEERING (2022)
Current international research into cellulose as a functional nanomaterial for advanced applications
S. J. Eichhorn et al.
JOURNAL OF MATERIALS SCIENCE (2022)
Optimizing lignocellulosic nanofibril dimensions and morphology by mechanical refining for enhanced adhesion
Peter V. Kelly et al.
CARBOHYDRATE POLYMERS (2021)
Sustainable production process of mechanically prepared nanocellulose from hardwood and softwood: A comparative investigation of refining energy consumption at laboratory and pilot scale
Wriju Kargupta et al.
INDUSTRIAL CROPS AND PRODUCTS (2021)
Developing fibrillated cellulose as a sustainable technological material
Tian Li et al.
NATURE (2021)
Recycled Cardboard Containers as a Low Energy Source for Cellulose Nanofibrils and Their Use in Poly(L-lactide) Nanocomposites
Katie Copenhaver et al.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2021)
Functional Nanocellulose, Alginate and Chitosan Nanocomposites Designed as Active Film Packaging Materials
Gregor Lavric et al.
POLYMERS (2021)
Effect of coupling agents on the olive pomace-filled polypropylene composite
Malek Aljnaid et al.
E-POLYMERS (2021)
Modified hemp fibers intended for fiber-reinforced polymer composites used in structural applications-A review. I. Methods of modification
Fulga Tanasa et al.
POLYMER COMPOSITES (2020)
Transparent semi-crystalline polymeric materials and their nanocomposites: A review
Yunyin Lin et al.
POLYMER ENGINEERING AND SCIENCE (2020)
Resource utilization and ionization modification of waste starch from the recycling process of old corrugated cardboard paper
Lingrui Lin et al.
JOURNAL OF ENVIRONMENTAL MANAGEMENT (2020)
Optimization of mechanical properties of glass-spheres-filled polypropylene composites for extrusion-based additive manufacturing
Martin Spoerk et al.
POLYMER COMPOSITES (2019)
Mechanical and Thermal Properties Modeling, Sorption Characteristics of Multiscale (Multiwalled Carbon Nanotubes/Glass Fiber) Filler Reinforced Polypropylene Composites
Nanoth Rasana et al.
JOURNAL OF VINYL & ADDITIVE TECHNOLOGY (2019)
Application of sunflower husk, hazelnut shell and walnut shell as waste agricultural fillers for epoxy-based composites: A study into mechanical behavior related to structural and rheological properties
Mateusz Barczewski et al.
POLYMER TESTING (2019)
Isolation of lignocellulose nanofiber from recycled old corrugated container and its interaction with cationic starch-nanosilica combination to make paperboard
Seyed Mehdi Yousefhashemi et al.
CELLULOSE (2019)
High strength Kevlar fiber reinforced advanced textile composites
Pragati Priyanka et al.
IRANIAN POLYMER JOURNAL (2019)
Recycling waste thermoplastic for energy efficient construction materials: An experimental investigation
M. K. Mondal et al.
JOURNAL OF ENVIRONMENTAL MANAGEMENT (2019)
FDM 3D Printing of Polymers Containing Natural Fillers: A Review of their Mechanical Properties
Valentina Mazzanti et al.
POLYMERS (2019)
Synthesis and characterization of cellulose-acetanilide ether and its antibacterial activity
Lahcen El Hamdaoui et al.
POLYMER BULLETIN (2018)
Cellulose nanofibril-reinforced polypropylene composites for material extrusion: Rheological properties
Lu Wang et al.
POLYMER ENGINEERING AND SCIENCE (2018)
A comparative study on the preparation and characterization of cellulose nanocrystals with various polymorphs
Jie Gong et al.
CARBOHYDRATE POLYMERS (2018)
Machining of Fibre Reinforced Plastic Composite Materials
Alessandra Caggiano
MATERIALS (2018)
A Review of the Impact Performance of Natural Fiber Thermoplastic Composites
James L. Thomason et al.
FRONTIERS IN MATERIALS (2018)
Mechanisms contributing to mechanical property changes in composites of polypropylene reinforced with spray-dried cellulose nanofibrils
Lu Wang et al.
CELLULOSE (2018)
Shrinkage and Warpage Optimization of Expanded-Perlite-Filled Polypropylene Composites in Extrusion-Based Additive Manufacturing
Martin Spoerk et al.
MACROMOLECULAR MATERIALS AND ENGINEERING (2017)
Liquid crystalline cellulose-based nematogels
Qingkun Liu et al.
SCIENCE ADVANCES (2017)
Influence of the process parameters on the mechanical properties of engineering biocomposites using a twin-screw extruder
M. Feldmann et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)
A review of recent developments in natural fibre composites and their mechanical performance
K. L. Pickering et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)
In-situ modification of cellulose nanofibrils by organosilanes during spray drying
Lu Wang et al.
INDUSTRIAL CROPS AND PRODUCTS (2016)
Epoxy Resin Thermosets Derived from Trehalose and β-Cyclodextrin
Quanxuan Zhang et al.
MACROMOLECULES (2016)
Maleic anhydride polypropylene modified cellulose nanofibril polypropylene nanocomposites with enhanced impact strength
Yucheng Peng et al.
POLYMER COMPOSITES (2016)
Polypropylene reinforced with nanocrystalline cellulose: Coupling agent optimization
Hojjat Mahi Hassanabadi et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2015)
Nanofibrillated cellulose: surface modification and potential applications
Susheel Kalia et al.
COLLOID AND POLYMER SCIENCE (2014)
Wood based PLA and PP composites: Effect of fibre type and matrix polymer on fibre morphology, dispersion and composite properties
Heidi Peltola et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2014)
Cellulose nanofibrils: Challenges and possibilities as a paper additive or coating material - A review
Fredrik Wernersson Brodin et al.
NORDIC PULP & PAPER RESEARCH JOURNAL (2014)
Conversion of Lignocellulosic Biomass to Nanocellulose: Structure and Chemical Process
H. V. Lee et al.
SCIENTIFIC WORLD JOURNAL (2014)
Influence of drying method on the material properties of nanocellulose I: thermostability and crystallinity
Yucheng Peng et al.
CELLULOSE (2013)
Mechanical depolymerisation of acidulated cellulose: understanding the solubility of high molecular weight oligomers
Abhijit Shrotri et al.
GREEN CHEMISTRY (2013)
Thermal analysis and crystallinity study of cellulose nanofibril-filled polypropylene composites
Han-Seung Yang et al.
JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2013)
Drying cellulose nanofibrils: in search of a suitable method
Yucheng Peng et al.
CELLULOSE (2012)
Comparison of Pumped Air Characteristics From a Rotary Atomizer With Three Types of Wheels
G. R. Chegini et al.
EXPERIMENTAL TECHNIQUES (2012)
Glass Fiber-Reinforced Composites: From Formulation to Application
Joy M. Stickel et al.
INTERNATIONAL JOURNAL OF APPLIED GLASS SCIENCE (2012)
Vibration damping characteristics of carbon fiber-reinforced composites containing multi-walled carbon nanotubes
Shafi Ullah Khan et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2011)
Comparison of different 2D image analysis measurement techniques for the shape of talc particles produced by different media milling
U. Ulusoy et al.
MINERALS ENGINEERING (2011)
A Statistical Approach to Optimize the Spray Drying of Starch Particles: Application to Dry Powder Coating
Luca Bilancetti et al.
AAPS PHARMSCITECH (2010)
Maleic anhydride incorporated onto cellulose and thermodynamics of cation-exchange process at the solid/liquid interface
Julio C. P. de Melo et al.
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2009)
Fabrication of long and discontinuous natural fiber reinforced polypropylene biocomposites and their mechanical properties
Byoung-Ho Lee et al.
FIBERS AND POLYMERS (2009)
High sulphidity kraft pulping
Leelo Olm et al.
NORDIC PULP & PAPER RESEARCH JOURNAL (2009)
Influence of particle properties on the viscosity of polymer-alumina composites
T. Hanemann
CERAMICS INTERNATIONAL (2008)
Effect of chemical treatment on dynamic mechanical properties of sisal fiber-reinforced polyester composites fabricated by resin transfer molding
P. A. Sreekumar et al.
COMPOSITE INTERFACES (2008)
Evaluation of the enzyme manganese peroxidase in an industrial sequence for the lignin oxidation and bleaching of eucalyptus kraft pulp
Gumersindo Feijoo et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2008)
A comparative study on mechanical properties and water absorption behavior of fiber-reinforced polypropylene composites prepared by OCC fiber and aspen fiber
Alireza Ashori et al.
POLYMER COMPOSITES (2008)
Optimization of the spray drying operating parameters - A quick trial-and-error method
Meng Wai Woo et al.
DRYING TECHNOLOGY (2007)
A comparative study of a spray dryer with rotary disc atomizer and pressure nozzle using computational fluid dynamic simulations
LX Huang et al.
CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2006)
Rotary disc atomisation for microencapsulation applications - prediction of the particle trajectories
E Teunou et al.
JOURNAL OF FOOD ENGINEERING (2005)
Effects of processing parameters on the mechanical properties of polypropylene random copolymer
S Sahin et al.
POLYMER TESTING (2005)
Hornification - its origin and interpretation in wood pulps
JMBF Diniz et al.
WOOD SCIENCE AND TECHNOLOGY (2004)
Effect of extractives on the flexural properties of wood/plastic composites
H Saputra et al.
COMPOSITE INTERFACES (2004)
Rheology of particle suspensions in viscoelastic media. Wood flour-polypropylene melt
NE Marcovich et al.
RHEOLOGICA ACTA (2004)
Crystallization behavior of nylon 6 nanocomposites
TD Fornes et al.
POLYMER (2003)
Preparation and characteristics of composites of high-crystalline cellulose with polypropylene: Effects of maleated polypropylene and cellulose content
WL Qiu et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2003)
Performance of rubberwood fiber-thermoplastic natural rubber composites
JK Sameni et al.
POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING (2003)
The effect of fiber treatment on the mechanical properties of unidirectional sisal-reinforced epoxy composites
MZ Rong et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2001)