☆ 4.7 Article

A semi-Markovian approach to evaluate the availability of low voltage direct current systems with integrated battery storage

RELIABILITY ENGINEERING & SYSTEM SAFETY (2024)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Green & Sustainable Science & Technology

Reliability evaluation of the renewable energy-based microgrids considering resource variation

Ayoub Nargeszar et al.

Summary: This paper investigates the impact of temperature and renewable resource variation on the failure rate of microgrid components, and evaluates the failure rate of the entire microgrid system in response to different energy sources through simulation.

IET RENEWABLE POWER GENERATION (2023)

添加到收藏夹

Article Engineering, Industrial

Reliability modeling for power converter in satellite considering periodic phased mission

Ying Zeng et al.

Summary: This paper proposes a new model of reliability considering the periodic phased mission system (PPMS) in space by using a new fusing failure rate. The new model is applicable not only to components following exponential distribution but also to others following Weibull distribution. Furthermore, the reliability of the converter in the satellite is modeled using the Dynamic Fault Tree and Markov Process (MP) at the converter level with the help of the state lumping method. The result shows that the reliability of the converter in the satellite is more accurate and reasonable compared to traditional methods.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2023)

添加到收藏夹

Article Engineering, Industrial

Reliability analysis of the multi-state system with nonlinear degradation model under Markov environment

Hao Lyu et al.

Summary: This paper discusses the engineering applications of multi-state systems in complex environments and degeneration processes. A mixed shock model and a Markov chain embedding method are introduced to establish a reliability model considering both hard failure and soft failure processes. Numerical integration is used to derive the reliability function of the soft failure process, and the developed methodology is validated through an application of a microengine. Compared with the Monte Carlo simulation, this model provides a useful tool for assessing the reliability of multi-state systems with nonlinear degradation processes.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2023)

添加到收藏夹

Article Engineering, Multidisciplinary

Operation-Based Reliability Assessment of Shore-to-Ship Charging Systems Including On-Shore Batteries

Siamak Karimi et al.

Summary: This paper proposes an operation-based reliability assessment framework for Shore-to-Ship Charging (S2SC) systems including On-Shore Batteries (OSB). The framework identifies the impact of operational planning on reliability and establishes a hierarchical reliability framework for evaluation. The analysis shows that batteries and the IGBTs in the power electronics converters are the most reliability-critical elements.

IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS (2023)

添加到收藏夹

Article Engineering, Industrial

Reliability optimization of multi-state networks in a star configuration with bi-level performance sharing mechanism and transmission losses

Armaghan Azhdari et al.

Summary: This paper studies a multi-state star network with a bi-level performance sharing mechanism. The network consists of a main node and multiple terminal nodes, which are connected through primary transmission lines and can share performance through a secondary common bus. Transmission loss is taken into account for accurate reliability estimation, and the network reliability and optimal component allocation are calculated using a universal generating function method.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2022)

添加到收藏夹

Article Engineering, Industrial

Optimal sequencing of elements activation in 1-out-of-n warm standby system with storage

Gregory Levitin et al.

Summary: This paper advances the state of the art in reliability analysis and optimization of warm standby systems by considering the practical storage component. It proposes a numerical algorithm to evaluate the reliability of a 1-out-of-n warm standby system with product storage and solves the optimal element activation sequence problem to maximize mission success probability.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2022)

添加到收藏夹

Review Computer Science, Information Systems

An Overview of Lifetime Management of Power Electronic Converters

Saeed Rahimpour et al.

Summary: This paper serves as a guideline for managing the lifetime of power converters, discussing various methods and techniques for failure analysis, lifetime prediction, and lifetime extension.

IEEE ACCESS (2022)

添加到收藏夹

Article Engineering, Electrical & Electronic

Fast and Accurate Modeling of Power Converter Availability for Adequacy Assessment

Amirali Davoodi et al.

Summary: This letter presents a method for modeling power converter availability in power system adequacy assessment, taking into account wear-out and chance failures to calculate an equivalent failure rate. Neglecting wear-out failures and the dynamic behavior of adequacy indices can lead to significant errors. Comparison with existing solutions through a case study shows the proposed method's superior performance in terms of accuracy and computational burden.

IEEE TRANSACTIONS ON POWER DELIVERY (2021)

添加到收藏夹

Article Energy & Fuels

A comprehensive study on reliability performance of Photovoltaic-battery-based microgrids under different energy management strategies

Jiahui Jiang et al.

Summary: This paper explores the impact of four different energy management strategies on the reliability of microgrids, revealing that the employed strategies can significantly affect the reliability indices of the system, increasing battery lifetime and reducing energy loss. This provides important insights for power engineers to properly design, plan and control future microgrids.

JOURNAL OF ENERGY STORAGE (2021)

添加到收藏夹

Article Engineering, Electrical & Electronic

Incorporating Power Electronic Converters Reliability Into Modern Power System Reliability Analysis

Saeed Peyghami et al.

Summary: This article discusses incorporating the reliability model of power electronic converters into power system reliability analysis, and proposes a procedure to evaluate the reliability of power electronic-based power systems. It explores the impact of converter failures on different applications and the required accuracy for reliability modeling in large-scale systems.

IEEE JOURNAL OF EMERGING AND SELECTED TOPICS IN POWER ELECTRONICS (2021)

添加到收藏夹

Article Engineering, Industrial

Optimal preventive maintenance policy of the balanced system under the semi-Markov model

Jingjing Wang et al.

Summary: The reliability problems of new systems like balanced systems have garnered more attention in recent years due to rapid technological advancements. However, research on maintenance optimization for balanced systems remains understudied, and existing policies for traditional systems are inadequate. A preventive maintenance optimization model is proposed under the semiMarkov model for balanced systems, with a focus on system balance and preventing system imbalance through timely maintenance actions. Numerical examples demonstrate the effectiveness of the proposed preventive maintenance policy for repairmen.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2021)

添加到收藏夹

Article Computer Science, Information Systems

An Assessment of Validity of the Bathtub Model Hazard Rate Trends in Electronics

Aishwarya Gaonkar et al.

Summary: This article examines the inapplicability of the bathtub model to predict the hazard rate of electronic components, products, and systems. It discusses the factors affecting the hazard rate of electronics and provides recommendations for assessing hazard rates.

IEEE ACCESS (2021)

添加到收藏夹

Article Energy & Fuels

Power management techniques for grid-connected DC microgrids: A comparative evaluation

Pedro J. dos Santos Neto et al.

APPLIED ENERGY (2020)

添加到收藏夹

Article Computer Science, Information Systems

Reliability Evaluation in Microgrids With Non-Exponential Failure Rates of Power Units

Saeed Peyghami et al.

IEEE SYSTEMS JOURNAL (2020)

添加到收藏夹

Article Energy & Fuels

Energy-saving opportunities of direct-DC loads in buildings

Daniel L. Gerber et al.

APPLIED ENERGY (2019)

添加到收藏夹

Article Engineering, Electrical & Electronic

Reliability of Power Electronics Systems

Johannes Falck et al.

IEEE INDUSTRIAL ELECTRONICS MAGAZINE (2018)

添加到收藏夹

Article Engineering, Multidisciplinary

Metrology requirements of state-of-the-art protection schemes for DC microgrids

Chunpeng Li et al.

JOURNAL OF ENGINEERING-JOE (2018)

添加到收藏夹

Article Engineering, Electrical & Electronic

Failure Analysis of the dc-dc Converter A comprehensive survey of faults and solutions for improving reliability

Levy Ferreira Costa et al.

IEEE POWER ELECTRONICS MAGAZINE (2018)

添加到收藏夹

Article Statistics & Probability

Semi-Markov Modelling for Multi-State Systems

Vlad Stefan Barbu et al.

METHODOLOGY AND COMPUTING IN APPLIED PROBABILITY (2017)

添加到收藏夹

Article Engineering, Electrical & Electronic

Survey on Reliability of Power Electronic Systems

Yantao Song et al.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2013)

添加到收藏夹

Article Energy & Fuels

PV System Reliability: An Operator's Perspective

Anastasios Golnas

IEEE JOURNAL OF PHOTOVOLTAICS (2013)

添加到收藏夹

Article Engineering, Industrial

A multi-state Markov model for a short-term reliability analysis of a power generating unit

Anatoly Lisnianski et al.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2012)

添加到收藏夹

Article Engineering, Industrial

A multi-state model for the reliability assessment of a distributed generation system via universal generating function

Yan-Fu Li et al.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2012)

添加到收藏夹

Article Engineering, Multidisciplinary

An Industry-Based Survey of Reliability in Power Electronic Converters

Shaoyong Yang et al.

IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS (2011)

添加到收藏夹

Article Engineering, Industrial

Semi-Markov models for degradation-based reliability

Jeffrey P. Kharoufeh et al.

IIE TRANSACTIONS (2010)

添加到收藏夹

Article Engineering, Industrial

Mathematical formulation and numerical treatment based on transition frequency densities and quadrature methods for non-homogeneous semi-Markov processes

Marcio das Chagas Moura et al.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2009)

添加到收藏夹

Article Computer Science, Hardware & Architecture

A Logarithmic Binary Decision Diagram-Based Method for Multistate System Analysis

Akhilesh Shrestha et al.

IEEE TRANSACTIONS ON RELIABILITY (2008)

添加到收藏夹

Article Energy & Fuels

Five years of operating experience at a large, utility-scale photovoltaic generating plant

L. M. Moore et al.

PROGRESS IN PHOTOVOLTAICS (2008)

添加到收藏夹

Article Engineering, Industrial

A fully Bayesian approach for combining multi-level information in multi-state fault tree quantification

T. L. Graves et al.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2007)

添加到收藏夹

Article Engineering, Industrial

Block diagram method for analyzing multi-state systems with uncovered failures

Gregory Levitin

RELIABILITY ENGINEERING & SYSTEM SAFETY (2007)

添加到收藏夹

Article Engineering, Industrial

A Monte-Carlo simulation approach for approximating multi-state two-terminal reliability

JE Ramirez-Marquez et al.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2005)

添加到收藏夹

Article Engineering, Industrial

A semi-Markovian model allowing for inhomogenities with respect to process time

G Becker et al.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2000)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.