☆ 3.8 Article

Monitoring the evolution of dimensional accuracy and product properties in property-controlled forming processes

ADVANCES IN INDUSTRIAL AND MANUFACTURING ENGINEERING (2024)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Automation & Control Systems

Real-time capable modelling approach of an innovative flow forming process for the property-controlled manufacturing of graded parts

Lukas Kersting et al.

Summary: The automated and resource-efficient production of high-strength lightweight components is becoming more important in industries such as aircraft or vehicle construction. The conventional flow-forming process has limitations in terms of reproducibility and producing parts with well-defined material property distributions. A novel closed-loop property control system that manipulates the tool path of the flow forming actuator based on online property measurement during the process could enhance the manufacturing process. This paper presents a control system model for the flow-forming process of metastable austenitic stainless steel.

AT-AUTOMATISIERUNGSTECHNIK (2023)

添加到收藏夹

Article Engineering, Manufacturing

Process Window and Repeatability of Thermomechanical Tangential Ring Rolling

Remi Lafarge et al.

Summary: International objectives for resource and energy efficiency necessitate new manufacturing processes, like the proposed thermomechanical tangential profiled ring rolling process, which combines rapid cooling and cold forming into a single step. This reduction in process steps and heating cycles offers improved energy efficiency compared to traditional methods. Through a series of experiments, this paper demonstrates the potential of the new process in terms of achievable hardness and microstructure, with the cooling system and rolling feed identified as essential factors. Furthermore, the repeatability of the process is analyzed, and potential disturbances are identified and ranked.

JOURNAL OF MANUFACTURING AND MATERIALS PROCESSING (2023)

添加到收藏夹

Article Engineering, Manufacturing

Temperature control for thermomechanical ring rolling

Remi Lafarge et al.

Summary: Thermomechanical tangential profiled ring rolling enables the manufacturing of ring shaped parts with specified geometry and hardness in one step. Controlling the cooling rate of the ring using supplementary cooling with compressed air is crucial for achieving acceptable reproducibility. This study demonstrates the possibility of temperature control using closed loop control and implements a controlled system model to determine PID parameters, showing improvement in process repeatability.

PRODUCTION ENGINEERING-RESEARCH AND DEVELOPMENT (2023)

添加到收藏夹

Article Engineering, Manufacturing

Softsensors: key component of property control in forming technology

Werner Homberg et al.

Summary: This paper introduces the concept and applications of using softsensors for forming processes, proposes a definition of softsensors, and provides several examples of practical applications.

PRODUCTION ENGINEERING-RESEARCH AND DEVELOPMENT (2023)

添加到收藏夹

Article Mathematics, Applied

STABILIZATION OF A MULTI-DIMENSIONAL SYSTEM OF HYPERBOLIC BALANCE LAWS

Michael Herty et al.

Summary: In this paper, we investigate the feedback stabilization problem for systems described by Hamilton-Jacobi type equations in R-n. By reformulating the problem, a stabilization problem for a multi-dimensional system of n hyperbolic partial differential equations is obtained. Using a novel Lyapunov function that takes into account the multi-dimensional geometry, we prove the stabilization of the resulting system in L(2) through suitable feedback control. We also provide examples based on the forming process to illustrate such systems.

MATHEMATICAL CONTROL AND RELATED FIELDS (2023)

添加到收藏夹

Article Pharmacology & Pharmacy

Soft sensor for content prediction in an integrated continuous pharmaceutical formulation line based on the residence time distribution of unit operations

Martin Gyurkes et al.

Summary: In this study, a concentration predicting soft sensor was developed based on the Residence Time Distribution (RTD) of a pharmaceutical formulation line. The RTD was investigated using color-based tracer experiments with image analysis. The study also demonstrated the feasibility of coupling unit operations in silico. The soft sensor showed accurate predictions compared to validation experiments, proving its adequacy.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2022)

添加到收藏夹

Article Engineering, Multidisciplinary

Soft sensor based on localized semi-supervised relevance vector machine for penicillin fermentation process with asymmetric data

Kepeng Qiu et al.

Summary: Due to operating conditions and instrument performance, batch process data often exhibit asymmetric characteristics, posing challenges for developing soft sensor models. These challenges include limited labeled data and the lack of an effective similarity evaluation for unlabeled data with multiphase characteristics. To address these challenges, a localized semi-supervised relevance vector machine-based soft sensor is proposed for multiphase batch processes with asymmetric data.

MEASUREMENT (2022)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

A nonlinear process monitoring strategy for a Metal Forming process

Ashish Kumar et al.

Summary: The article discusses the development of a nonlinear statistical process monitoring strategy for a metal forming process using Kernel Principal Component Analysis (KPCA). The strategy effectively addresses the issue of inherent nonlinearity among the measured characteristics and achieves fault detection. The application of the strategy on a Rolling Mill Unit (RMU) demonstrates its efficiency.

MATERIALS TODAY-PROCEEDINGS (2022)

添加到收藏夹

Article Engineering, Manufacturing

Data based model predictive control for ring rolling

Remi Lafarge et al.

Summary: The paper presents a concept for hardness control of ring rolling based on soft sensors and model predictive control, implemented in virtual experiments. The operation of the different models needed for this control loop are detailed, and the controller itself is illustrated.

PRODUCTION ENGINEERING-RESEARCH AND DEVELOPMENT (2021)

添加到收藏夹

Article Chemistry, Physical

Semi-Destructive and Non-Destructive Tests of Timber Structure of Various Moisture Contents

Justyna Jaskowska-Lemanska et al.

Summary: The study evaluated the influence of moisture content on various tests of timber constructions, revealing a strong correlation between moisture content and test outcomes.

MATERIALS (2021)

添加到收藏夹

Article Engineering, Multidisciplinary

Conceptual design of a machine learning-based wearable soft sensor for non-invasive cardiovascular risk assessment

Pasquale Arpaia et al.

Summary: With the increasing number of elderly people, heart diseases have become a major issue in healthy aging. A concept design of a soft sensor for measuring cardiovascular risk in real time showed promising results with high classification accuracy in the experiment.

MEASUREMENT (2021)

添加到收藏夹

Article Engineering, Electrical & Electronic

An intrinsically embedded pressure-temperature dual-mode soft sensor towards soft robotics

Qiang Zou et al.

Summary: The intrinsically embedded pressure-temperature dual-mode soft sensors in soft robots can independently perceive the pressure and temperature of objects, with high sensitivity and robustness, and can be used to recognize the size, weight, temperature variation, and hardness of different objects.

SENSORS AND ACTUATORS A-PHYSICAL (2021)

添加到收藏夹

Article Chemistry, Analytical

Eddy Current Sensor System for Tilting Independent In-Process Measurement of Magnetic Anisotropy

Frank Wendler et al.

Summary: This study introduces a novel eddy current sensor system for non-contact measurement of the magnetic anisotropy of a workpiece, enabling separation and correction of tilting effects. The measurement principle is demonstrated with two samples of different magnetic anisotropy values induced by cold forming and analyzed under different tilt angles. Additionally, digital signal processing is used to differentiate the effects of tilt and anisotropy based on the acquired raw data.

SENSORS (2021)

添加到收藏夹

Review Engineering, Electrical & Electronic

A Review on Soft Sensors for Monitoring, Control, and Optimization of Industrial Processes

Yuchen Jiang et al.

Summary: In the past twenty years, there have been numerous research outcomes related to the design and implementation of soft sensors. Various types of soft sensors are essential in modern industrial processes for monitoring, control, and optimization. Advances in theories, techniques, and information infrastructure have improved the performance of soft sensing, but new opportunities also bring new challenges. This work aims to provide a comprehensive review of developments in soft sensors since the year 2000, focusing on the most up-to-date advancements from the perspective of systems and control.

IEEE SENSORS JOURNAL (2021)

添加到收藏夹

Proceedings Paper Automation & Control Systems

A Structure for the Control of Geometry and Properties of a Freeform Bending Process

Ahmed Ismail et al.

Summary: In production shaping processes today, closed loop control is mainly used for controlling the geometry, while adjustments of mechanical properties in freeform bending processes require numerous experimental iterations. A proposed multivariable feedback control structure in this study is capable of controlling both the geometry of the workpiece and selected mechanical properties of the material.

IFAC PAPERSONLINE (2021)

添加到收藏夹

Proceedings Paper Automation & Control Systems

Model-based Control of the Strip Roughness in Cold Rolling

Christopher Schulte et al.

Summary: Great improvements have been made in cold rolling in recent years, but surface roughness and related properties have not been completely mastered. A layered control loop is used to track a given roughness reference, with experimental results showing good tracking performance of the roughness controller and the importance of considering strip thickness as an additional control variable.

IFAC PAPERSONLINE (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Dynamic recrystallization-dependent damage modeling during hot forming

Muhammad Imran et al.

INTERNATIONAL JOURNAL OF DAMAGE MECHANICS (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Microstructural Evolution During Deformation of a QP980 Steel

Diyar Salehiyan et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2020)

添加到收藏夹

Proceedings Paper Automation & Control Systems

Online Model Adaptation in Cold Rolling for Improvement of Thickness Precision

Matthias Wehr et al.

IFAC PAPERSONLINE (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Modeling Macroscopic Material Behavior With Machine Learning Algorithms Trained by Micromechanical Simulations

Denise Reimann et al.

FRONTIERS IN MATERIALS (2019)

添加到收藏夹

Article Engineering, Multidisciplinary

Soft sensors design in a petrochemical process using an Evolutionary Algorithm

Gustavo A. P. de Morais et al.

MEASUREMENT (2019)

添加到收藏夹

Proceedings Paper Engineering, Manufacturing

Towards the Damage Evolution for Hot Forming Processes using Gurson-Tvergaard Needleman Model - coupled to dynamic recrystallization

Muhammad Imran et al.

PROCEEDINGS OF THE 22ND INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING (ESAFORM 2019) (2019)

添加到收藏夹

Article Engineering, Civil

NON-DESTRUCTIVE TESTING METHODS AS A MAIN TOOL SUPPORTING EFFECTIVE WASTE MANAGEMENT IN CONSTRUCTION PROCESSES

J. Jaskowska-Lemanska et al.

ARCHIVES OF CIVIL ENGINEERING (2019)

添加到收藏夹

Article Engineering, Electrical & Electronic

Reducing the Lift-Off Effect on Permeability Measurement for Magnetic Plates From Multifrequency Induction Data

Mingyang Lu et al.

IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2018)

添加到收藏夹

Article Automation & Control Systems

Investigation of the progressive hot die stamping of a complex boron steel part using numerical simulations and Gleeble tests

N. Demazel et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)

添加到收藏夹

Article Engineering, Industrial

Closed-loop control of product properties in metal forming

J. M. Allwood et al.

CIRP ANNALS-MANUFACTURING TECHNOLOGY (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

Devising Strain Hardening Models Using Kocks-Mecking PlotsA Comparison of Model Development for Titanium Aluminides and Case Hardening Steel

Markus Bambach et al.

METALS (2016)

添加到收藏夹

Article Automation & Control Systems

Soft sensor for real-time cement fineness estimation

Darko Stanisic et al.

ISA TRANSACTIONS (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

Comparative study of eddy current and Barkhausen noise nondestructive testing methods in microstructural examination of ferrite-martensite dual-phase steel

S. Ghanei et al.

JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2014)

添加到收藏夹

Article Engineering, Industrial

Closed-loop control of product properties in metal forming: A review and prospectus

James A. Polyblank et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2014)

添加到收藏夹

Article Engineering, Civil

Press hardening - An innovative and challenging technology

R. Neugebauer et al.

ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING (2012)

添加到收藏夹

Review Materials Science, Multidisciplinary

A review of three magnetic NDT technologies

Z. D. Wang et al.

JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2012)

添加到收藏夹

Article Engineering, Mechanical

On stress-state dependent plasticity modeling: Significance of the hydrostatic stress, the third invariant of stress deviator and the non-associated flow rule

Xiaosheng Gao et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2011)

添加到收藏夹

Article Engineering, Industrial

Experimental study and FEM analysis of redundant strains in flow forming of tubes

M. S. Mohebbi et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2010)

添加到收藏夹

Article Engineering, Electrical & Electronic

Novel measurement and monitoring system for forming processes based on piezoresistive thin film systems

Saskia Biehl et al.

MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS (2010)

添加到收藏夹

Article Nanoscience & Nanotechnology

Simulation of steel microstructure evolution during induction heating

B. J. Yang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)

添加到收藏夹

Article Engineering, Industrial

Closed-loop feedback control of product properties in flexible metal forming processes with mobile tools

Julian M. Allwood et al.

CIRP ANNALS-MANUFACTURING TECHNOLOGY (2009)

添加到收藏夹

Review Computer Science, Interdisciplinary Applications

Data-driven Soft Sensors in the process industry

Petr Kadlec et al.

COMPUTERS & CHEMICAL ENGINEERING (2009)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Ring rolling research at the Dresden University of Technology - its history from the beginning in the 70s to the present

T Ficker et al.

STEEL RESEARCH INTERNATIONAL (2005)

添加到收藏夹

Review Engineering, Industrial

A review of the application of acoustic emission techniques for monitoring forming and grinding processes

T Jayakumar et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2005)

添加到收藏夹

Article Materials Science, Multidisciplinary

Microstructure evolution during metal forming processes

N Bontcheva et al.

COMPUTATIONAL MATERIALS SCIENCE (2003)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.