☆ 4.7 Article

Extreme-oriented sensitivity analysis using sparse polynomial chaos expansion. Application to train-track-bridge systems

RELIABILITY ENGINEERING & SYSTEM SAFETY (2024)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Civil

Optimal design of rail level crossings and associated transition zones using adaptive surrogate-assisted optimization

Yue Shang et al.

ENGINEERING STRUCTURES (2023)

添加到收藏夹

Article Engineering, Mechanical

Reconstruction of sleeper displacements from measured accelerations for model-based condition monitoring of railway crossing panels

Marko D. G. Milosevic et al.

Summary: Railway switches and crossings (S&C, turnouts) are essential for connecting different track sections, but they also cause higher degradation rates compared to regular tracks. This paper focuses on the development of tailored signal processing tools for condition monitoring using embedded accelerometers in crossing panels. Analysis of sleeper acceleration measurement data from 100,000 train passages is performed, and a novel frequency-domain displacement reconstruction method is developed. The separation of the track response is proposed as a strategy to observe the ballast condition and crossing geometry condition.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2023)

添加到收藏夹

Article Engineering, Industrial

Uncertainty quantification and global sensitivity analysis of composite wind turbine blades

Mishal Thapa et al.

Summary: This paper presents a framework for uncertainty quantification (UQ) and global sensitivity analysis (GSA) of composite wind turbine blades using polynomial chaos expansion (PCE) with l(1)-minimization. The framework is capable of handling a large number of random parameters and can assess the relative importance of these parameters using Sobol Indices. It also allows for arbitrary distributions of random inputs and spatial variations of material and geometric properties. The presented framework is applied to three composite wind turbine blade problems, and results are compared to Monte Carlo simulations.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2022)

添加到收藏夹

Article Computer Science, Software Engineering

TTB-2D: Train-Track-Bridge interaction simulation tool for Matlab

Daniel Cantero

Summary: The software TTB-2D simulates the dynamic response of a Train-Track-Bridge system in a 2D representation, providing a validated numerical model for vehicle-infrastructure interaction.

SOFTWAREX (2022)

添加到收藏夹

Article Engineering, Mechanical

Analysis of the consistency of the Sperling index for rail vehicles based on different algorithms

Chenxin Deng et al.

Summary: Ride comfort indices are used to assess rail vehicle vibration and passenger discomfort, with the Sperling index being widely used but with inconsistent results from different algorithms. This study compares time and frequency domain analysis algorithms, finding r.m.s-based algorithms to be stable and consistent across different sample times. Time-frequency consistency is verified using Parseval's theorem and time domain simulation results.

VEHICLE SYSTEM DYNAMICS (2021)

添加到收藏夹

Article Mechanics

Modeling uncertainties of vehicle-track coupled dynamic systems

Wei Wang et al.

Summary: In this paper, nonparametric models of vehicle and track subsystems are established separately using a probabilistic method. The sensitivity of random responses to uncertainties in coefficient matrices is analyzed, and confidence intervals from nonparametric and parametric models are compared. The results validate the effectiveness of the nonparametric model for vehicle-track coupled systems.

MECHANICS BASED DESIGN OF STRUCTURES AND MACHINES (2021)

添加到收藏夹

Article Engineering, Industrial

Polynomial chaos expansion for sensitivity analysis of model output with dependent inputs

Thierry A. Mara et al.

Summary: This paper discusses sensitivity analysis of model response in the presence of dependent model inputs. Two types of sensitivity indices are evaluated: those accounting for input dependence and those that do not. New strategies and computationally efficient methods for estimating variance-based sensitivity indices are derived, relying on polynomial chaos expansion. Numerical exercises demonstrate the performance of these new methods, including a sensitivity analysis of a drainage model following statistical calibration.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2021)

添加到收藏夹

Article Engineering, Industrial

Sensitivity method for extreme-based engineering problems

M. Nogal et al.

Summary: This paper introduces a simple method for conducting sensitivity analyses for extreme-based engineering problems without the need to define the probability distribution of input factors, making it convenient for practitioners to use.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2021)

添加到收藏夹

Review Engineering, Civil

Adaptive approaches in metamodel-based reliability analysis: A review

Rui Teixeira et al.

Summary: This work reviews the implementation of adaptive metamodeling for reliability analysis, with emphasis on four main types of metamodels and a comparative discussion of their conceptual problems, theoretical descriptions, and applications. The efficiency of adaptive metamodeling is influenced by various considerations, and new areas of research interest such as cross application of methodologies and ensembles are identified.

STRUCTURAL SAFETY (2021)

添加到收藏夹

Article Engineering, Mechanical

Fast and robust identification of railway track stiffness from simple field measurement

Chen Shen et al.

Summary: The paper proposes a method that combines a physics-based finite element (FE) track model and a data-driven Gaussian process regression (GPR) model to directly infer railpad and ballast stiffness from measured frequency response functions (FRF) by field hammer tests. The enriched features and fusion strategy effectively reduce prediction errors, outperforming particle swarm optimization (PSO) in worst-case scenarios. The method enables fast predictions for large datasets and can extract stiffness values using a simple setup.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2021)

添加到收藏夹

Article Engineering, Industrial

Reliability-oriented sensitivity analysis in presence of data-driven epistemic uncertainty

Gabriel Sarazin et al.

Summary: This paper investigates reliability assessment in the presence of epistemic uncertainty and proposes a sensitivity analysis method to quantify the impact of data-driven modeling on both margins and Copula. The proposed method is validated through simulation studies.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2021)

添加到收藏夹

Article Engineering, Industrial

Variance-based reliability sensitivity analysis and the FORM α-factors

Iason Papaioannou et al.

Summary: This paper discusses the relation between variance-based sensitivity measures and FORM alpha-factors, showing that there exist one-to-one relationships between them for linear limit-state functions of normal random variables. The relationships enable a good approximation of variance-based sensitivities for general reliability problems, shedding light on the behavior of first-order and total-effect indices of the failure event in engineering reliability problems.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2021)

添加到收藏夹

Article Engineering, Industrial

Extremum sensitivity analysis with polynomial Monte Carlo filtering

Chun Yui Wong et al.

Summary: Global sensitivity analysis is a powerful approach for understanding the importance and interactions between uncertain parameters in a computational model. This paper explores the efficient computation of sensitivity indices through polynomial ridge approximation and methods for evaluating sensitivities near output extrema, including novel extremum Sobol' indices based on Monte Carlo filtering (MCF). The relationship between MCF-based indices and skewness-based indices is empirically explored, showcasing the potential effectiveness of these approaches.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2021)

添加到收藏夹

Article Engineering, Mechanical

Uncertainty and sensitivity analysis for train-ballasted track-bridge system

Lifeng Xin et al.

VEHICLE SYSTEM DYNAMICS (2020)

添加到收藏夹

Article Engineering, Civil

Sensitivity and dynamic analysis of train-bridge coupled system with multiple random factors

Xiang Liu et al.

ENGINEERING STRUCTURES (2020)

添加到收藏夹

Article Engineering, Industrial

Global sensitivity analysis in high dimensions with PLS-PCE

Max Ehre et al.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2020)

添加到收藏夹

Article Engineering, Mechanical

An efficient approach for dynamic global sensitivity analysis of stochastic train-track-bridge system

Hua-Ping Wan et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2019)

添加到收藏夹

Article Engineering, Industrial

Global sensitivity analysis in the context of imprecise probabilities (p-boxes) using sparse polynomial chaos expansions

Roland Schobi et al.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2019)

添加到收藏夹

Article Statistics & Probability

Estimation of quantile oriented sensitivity indices

Veronique Maume-Deschamps et al.

STATISTICS & PROBABILITY LETTERS (2018)

添加到收藏夹

Article Engineering, Civil

Reliability sensitivity estimation with sequential importance sampling

Iason Papaioannou et al.

STRUCTURAL SAFETY (2018)

添加到收藏夹

Article Engineering, Mechanical

A new model for temporal-spatial stochastic analysis of vehicle-track coupled systems

Lei Xu et al.

VEHICLE SYSTEM DYNAMICS (2017)

添加到收藏夹

Article Engineering, Mechanical

Sensitivity Analysis of Railpad Parameters on Vertical Railway Track Dynamics

Maider Oregui et al.

JOURNAL OF ENGINEERING MECHANICS (2017)

添加到收藏夹

Article Engineering, Mechanical

Sensitivity Analysis of Railpad Parameters on Vertical Railway Track Dynamics

Maider Oregui et al.

JOURNAL OF ENGINEERING MECHANICS (2017)

添加到收藏夹

Article Engineering, Multidisciplinary

High-order statistics in global sensitivity analysis: Decomposition and model reduction

G. Geraci et al.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2016)

添加到收藏夹

Article Engineering, Industrial

Computing derivative-based global sensitivity measures using polynomial chaos expansions

B. Sudret et al.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2015)

添加到收藏夹

Article Engineering, Multidisciplinary

POLYNOMIAL-CHAOS-BASED KRIGING

Roland Schoebi et al.

INTERNATIONAL JOURNAL FOR UNCERTAINTY QUANTIFICATION (2015)

添加到收藏夹

Article Engineering, Civil

Probabilistic safety assessment of a short span high-speed railway bridge

J. M. Rocha et al.

ENGINEERING STRUCTURES (2014)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Adaptive sparse polynomial chaos expansion based on least angle regression

Geraud Blatman et al.

JOURNAL OF COMPUTATIONAL PHYSICS (2011)

添加到收藏夹

Article Engineering, Industrial

Efficient computation of global sensitivity indices using sparse polynomial chaos expansions

Geraud Blatman et al.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2010)

添加到收藏夹

Review Engineering, Industrial

Global sensitivity analysis using polynomial chaos expansions

Bruno Sudret

RELIABILITY ENGINEERING & SYSTEM SAFETY (2008)

添加到收藏夹

Article Engineering, Industrial

A new uncertainty importance measure

E. Borgonovo

RELIABILITY ENGINEERING & SYSTEM SAFETY (2007)

添加到收藏夹

Article Acoustics

Modelling and experiment of railway ballast vibrations

WM Zhai et al.

JOURNAL OF SOUND AND VIBRATION (2004)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Dynamic analysis of high speed railway bridge under articulated trains

H Xia et al.

COMPUTERS & STRUCTURES (2003)

添加到收藏夹

Article Mathematics, Applied

The Wiener-Askey polynomial chaos for stochastic differential equations

DB Xiu et al.

SIAM JOURNAL ON SCIENTIFIC COMPUTING (2002)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Global sensitivity indices for nonlinear mathematical models and their Monte Carlo estimates

IM Sobol

MATHEMATICS AND COMPUTERS IN SIMULATION (2001)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.