☆ 4.8 Article

MXene-Interconnected Two-Terminal, Mechanically-Stacked Perovskite/Silicon Tandem Solar Cell with High Efficiency

ADVANCED FUNCTIONAL MATERIALS (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Chemistry, Physical

Intermediate-phase engineering via dimethylammonium cation additive for stable perovskite solar cells

David P. McMeekin et al.

Summary: Achieving long-term stability is the key challenge for widespread commercialization of perovskite solar cells. This study introduces a high-temperature dimethyl-sulfoxide-free processing method to control the crystallization of perovskite films, effectively improving the material quality and operational stability of the devices. The encapsulated devices showed improved lifetimes, with a median T80 of 1,190 hours and a champion device reaching a T80 of 1,410 hours.

NATURE MATERIALS (2023)

添加到收藏夹

Article Chemistry, Physical

Balancing Charge-Carrier Transport and Recombination for Perovskite/TOPCon Tandem Solar Cells with Double-Textured Structures

Jingming Zheng et al.

Summary: This research focuses on the double-textured TOPCon structures and investigates their passivation and contact properties. By rearranging the schedules of annealing processes and the radio frequency powers of SiOx deposition, the passivation and contact properties can be regulated. The proof-of-concept perovskite/TOPCon tandem solar cells featuring the double-textured structures achieve a remarkable efficiency of 28.49%.

ADVANCED ENERGY MATERIALS (2023)

添加到收藏夹

Article Chemistry, Physical

Boosting radiation of stacked halide layer for perovskite solar cells with efficiency over 25%

Min Ju Jeong et al.

Summary: Although halide perovskite solar cells (PSCs) have made significant progress in device performance, they still fall short of the theoretical efficiency. Boosting radiation in the full device stack is found to be an effective method for reaching the radiative limit of power conversion efficiency (PCE). Controlling the CTL/perovskite interface is crucial for enhancing radiation in the full device stack. By combining interface and bulk engineering, an improved external PLQE of 15.57% was achieved, resulting in a higher PCE of over 25% and nearly 95% achievement rate of the radiative limit Voc.

JOULE (2023)

添加到收藏夹

Review Physics, Multidisciplinary

Comparative architecture in monolithic perovskite/silicon tandem solar cells

Sayantan Mazumdar et al.

Summary: Perovskite/silicon tandem solar cells (PSTSCs) have the potential to overcome the efficiency limit of single-junction silicon solar cells by combining the wider bandgap of a semitransparent perovskite solar cell (PSC) with the ability of a narrow bandgap silicon solar cell to convert infrared light. However, the actual efficiency of PSTSCs is currently below the theoretical limit, and challenges in stability and upscaling need to be addressed.

SCIENCE CHINA-PHYSICS MECHANICS & ASTRONOMY (2023)

添加到收藏夹

Article Chemistry, Multidisciplinary

Efficient Perovskite/Silicon Tandem Solar Cells on Industrially Compatible Textured Silicon

Xin Luo et al.

Summary: An anion-engineered additive strategy is developed to control the crystallization process of wide-bandgap perovskite films on industrially textured silicon, resulting in improved film crystallinity and reduced trap density. This strategy enables the fabrication of 28.6%-efficient perovskite/silicon tandem solar cells, which retain over 80% of their initial performance after 2000 hours of operation under full 1-sun illumination.

ADVANCED MATERIALS (2023)

添加到收藏夹

Review Chemistry, Physical

Probing charge carrier dynamics in metal halide perovskite solar cells

Cheng Qiu et al.

Summary: This review provides a comprehensive overview of the measurement techniques for carrier dynamics in perovskite solar cells (PSCs), aiming to provide researchers with the necessary knowledge to choose suitable measurement methods.

ECOMAT (2023)

添加到收藏夹

Article Chemistry, Multidisciplinary

Scaled Deposition of Ti3C2Tx MXene on Complex Surfaces: Application Assessment as Rear Electrodes for Silicon Heterojunction Solar Cells

Erkan Aydin et al.

Summary: The study demonstrates the potential of spray-coated MXene-based electrodes for solar cells, showing high power conversion efficiency and long-term stability.

ACS NANO (2022)

添加到收藏夹

Review Chemistry, Multidisciplinary

Monolithic Perovskite-Silicon Tandem Solar Cells: From the Lab to Fab?

Fan Fu et al.

Summary: This review focuses on the scientific and technological challenges of monolithic 2-terminal perovskite-silicon tandem solar cells, including factors limiting power conversion efficiency, pathways to achieve higher efficiency, and stability issues. Key areas of research to bring this technology from the lab to industrial production are highlighted.

ADVANCED MATERIALS (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Solution-processed silicon/SnCl2-treated Ti3C2Tx MXene Schottky junction solar cells

Xincheng Yao et al.

Summary: A novel photovoltaic cell based on Ti3C2Tx, MXene/n-type silicon Schottky junction was developed using a simple solution-processed method, showing a high power conversion efficiency. Treatment of the MXene layer with a SnCl2 aqueous solution improved performance by reducing light reflection and increasing carrier lifetime.

SCIENCE CHINA-MATERIALS (2022)

添加到收藏夹

Review Chemistry, Physical

Insights into the Development of Monolithic Perovskite/Silicon Tandem Solar Cells

Bingbing Chen et al.

Summary: Perovskite/silicon tandem solar cells have high potential in photovoltaic systems but face challenges such as low conversion efficiency and poor stability. Overcoming the limitations of the top cell and utilizing encapsulation can help improve efficiency.

ADVANCED ENERGY MATERIALS (2022)

添加到收藏夹

Review Chemistry, Multidisciplinary

Wide-Bandgap Organic-Inorganic Lead Halide Perovskite Solar Cells

Yao Tong et al.

Summary: This review summarizes the progress of wide-bandgap mixed halide perovskite solar cells and discusses their diverse applications in different fields and the challenges they face.

ADVANCED SCIENCE (2022)

添加到收藏夹

Article Energy & Fuels

Highly Efficient 2D Materials Engineered Perovskite/Si Tandem Bifacial Cells Beyond 29%

Antonio Agresti et al.

Summary: Perovskite/Silicon tandem technology is a promising route to achieve 30% power conversion efficiency (PCE) with low levelized cost energy. This article presents a mechanically stacked 2T perovskite/silicon tandem solar cell, where subcells are independently fabricated and optimized. The use of selected two-dimensional materials and a protective buffer layer improves the performance of the semitransparent perovskite top cell. The tandem device demonstrates a remarkable PCE of 28.7% and the use of a bifacial silicon bottom cell overcomes the current matching constraint.

IEEE JOURNAL OF PHOTOVOLTAICS (2022)

添加到收藏夹

Article Optics

Defect engineering in wide-bandgap perovskites for efficient perovskite-silicon tandem solar cells

Guang Yang et al.

Summary: By employing tribromide ions to reduce charge recombination, efficient wide-bandgap mixed-halide perovskite-silicon tandem solar cells with an efficiency of up to 28.6% are reported, while also enhancing device stability.

NATURE PHOTONICS (2022)

添加到收藏夹

Article Chemistry, Physical

Laminated Monolithic Perovskite/Silicon Tandem Photovoltaics

Julie Roger et al.

Summary: Perovskite/silicon tandem photovoltaics have gained significant attention in recent years. To improve their performance and stability, new materials and processes are being explored. A novel lamination process for the top perovskite solar cell (PSC) is proposed, resulting in prototypes with stable power output efficiencies of up to 20.0%. The lamination approach offers advantages such as the ability to engineer perovskite morphology and achieve improved stability.

ADVANCED ENERGY MATERIALS (2022)

添加到收藏夹

Article Energy & Fuels

Procedure Based on External Quantum Efficiency for Reliable Characterization of Perovskite Solar Cells

Lucia Mercaldo et al.

Summary: This study discusses the challenges of reliable characterization of perovskite solar cells (PSCs) and the importance of standardizing measurement protocols. By combining experimental data and optical simulations, the External Quantum Efficiency (EQE) is proposed as a reliable estimate for Short Circuit Current Density (J (SC)), providing a direction for PSC optimization.

ENERGY TECHNOLOGY (2022)

添加到收藏夹

Article Chemistry, Physical

A Two-Step Solution-Processed Wide-Bandgap Perovskite for Monolithic Silicon-Based Tandem Solar Cells with >27% Efficiency

Bingbing Chen et al.

Summary: A two-step sequential deposition method has been successfully applied to narrow-bandgap perovskite solar cells, resulting in improved efficiency and area for monolithic perovskite/silicon tandem solar cells, as well as for an enlarged-scaled tandem device.

ACS ENERGY LETTERS (2022)

添加到收藏夹

Editorial Material Chemistry, Physical

Monolithic Perovskite/Silicon Tandem Solar Cell with 28.7% Efficiency Using Industrial Silicon Bottom Cells

Kari Sveinbjoernsson et al.

Summary: A monolithic two-terminal perovskite/silicon tandem solar cell was fabricated based on an industrial silicon bottom cell with mass-production feasible processes, showing a steady-state power conversion efficiency of 28.7% and an open-circuit voltage of over 1.9 V.

ACS ENERGY LETTERS (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Fully Textured, Production-Line Compatible Monolithic Perovskite/Silicon Tandem Solar Cells Approaching 29% Efficiency

Lin Mao et al.

Summary: This study develops a molecular-level nanotechnology to achieve high-performance perovskite/silicon tandem solar cells on fully textured wafer. By using a designed ultrathin hybrid hole transport layer, the cells obtain a certified efficiency of 28.84% on a 1.2 cm（2）masked area, which is the highest performance to date.

ADVANCED MATERIALS (2022)

添加到收藏夹

Article Nanoscience & Nanotechnology

Nano-optical designs for high-efficiency monolithic perovskite-silicon tandem solar cells

Philipp Tockhorn et al.

Summary: Gentle sinusoidal nanotextures were designed to achieve high-efficiency perovskite-silicon solar cells, offering advantages such as reduced reflection losses, increased fabrication yield, and improved open-circuit voltage.

NATURE NANOTECHNOLOGY (2022)

添加到收藏夹

Article Chemistry, Physical

Conductive Passivator for Efficient Monolithic Perovskite/Silicon Tandem Solar Cell on Commercially Textured Silicon

Qiaojing Xu et al.

Summary: By using independent perovskite/silicon tandem solar cells on commercially textured silicon, combined with a conductive organic amine salt at the interface, the efficiency of solar cells is greatly improved.

ADVANCED ENERGY MATERIALS (2022)

添加到收藏夹

Article Nanoscience & Nanotechnology

Ti3C2Tx MXene Nanoflakes Embedded with Copper Indium Selenide Nanoparticles for Desalination and Water Purification through High-Efficiency Solar-Driven Membrane Evaporation

Yijin Wang et al.

Summary: This study reports a composite photothermal membrane based on MXene nanoflakes and copper indium selenide nanoparticles for highly efficient solar-driven interface evaporation in water treatment. The results show that the composite membrane has advantages in improving light-to-heat conversion efficiency and impurity removal ability, and it also exhibits excellent durability and adaptability to light intensity.

ACS APPLIED MATERIALS & INTERFACES (2022)

添加到收藏夹

Article Nanoscience & Nanotechnology

Enhanced Potassium-Ion Storage of the 3D Carbon Superstructure by Manipulating the Nitrogen-Doped Species and Morphology

Yanhua Li et al.

Summary: In this study, an eco-efficient synthetic route was developed to create carbon superstructures with enhanced nitrogen-rich active facets for improved potassium-ion storage capabilities. By regulating the nitrogen doping types and morphology, the performance of the carbon superstructures was significantly enhanced.

NANO-MICRO LETTERS (2021)

添加到收藏夹

Review Chemistry, Physical

Wide-Bandgap Metal Halide Perovskites for Tandem Solar Cells

Jinhui Tong et al.

Summary: Metal halide perovskite solar cells have emerged as the most promising new-generation solar cell technology, especially for wide-bandgap solar cells. Research progress on developing wide-bandgap PSCs and utilizing them in tandem configurations has been highlighted, emphasizing on efficiency improvement and stability challenges.

ACS ENERGY LETTERS (2021)

添加到收藏夹

Article Multidisciplinary Sciences

Perovskite solar cells with atomically coherent interlayers on SnO2 electrodes

Hanul Min et al.

Summary: By introducing an interlayer between the electron-transporting and perovskite layers in perovskite solar cells, researchers have successfully enhanced charge extraction and transport from the perovskite, leading to higher power conversion efficiency and fewer interfacial defects. The coherent interlayer allowed the fabrication of devices with a certified efficiency of 25.5%, which maintained about 90% of its initial efficiency even after continuous light exposure for 500 hours. The findings provide guidelines for designing defect-minimizing interfaces in metal halide perovskites and electron-transporting layers.

NATURE (2021)

添加到收藏夹

Article Chemistry, Physical

Wide Bandgap Interface Layer Induced Stabilized Perovskite/Silicon Tandem Solar Cells with Stability over Ten Thousand Hours

Yucheng Li et al.

Summary: The perovskite/silicon tandem solar cell can break through the efficiency limitations of silicon cells by optimizing energy level alignment, achieving high efficiency and stability for long-term operation.

ADVANCED ENERGY MATERIALS (2021)

添加到收藏夹

Review Materials Science, Multidisciplinary

Review on perovskite silicon tandem solar cells: Status and prospects 2T, 3T and 4T for real world conditions

S. Akhil et al.

Summary: The successful integration of perovskite and silicon cells in tandem solar devices has the potential to outperform single-junction silicon devices. Researchers are optimizing various components and proposing solutions to overcome challenges, with the aim of achieving efficiency levels near or above the Shockley Queisser limit, making tandem devices a promising candidate for future energy conversion.

MATERIALS & DESIGN (2021)

添加到收藏夹

Article Chemistry, Physical

28.2%-efficient, outdoor-stable perovskite/silicon tandem solar cell

Jiang Liu et al.

Summary: Adding carbazole as an additive to the perovskite precursor solution can enhance the stability and performance of perovskite solar cells in a monolithic tandem configuration. The improved devices demonstrate a high stabilized PCE and excellent performance in hot and humid outdoor environments, showing enhanced phase stability.

JOULE (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Perspectives on solution processing of two-dimensional MXenes

Sina Abdolhosseinzadeh et al.

Summary: This review discusses the progress in solution processing of MXenes over the past decade and outlines key perspectives for future scalable manufacturing strategies, including etching of MAX phases, delamination of MXene, rheological properties of MXene dispersions, and wetting of MXene inks. Strategies for ink formulation and fine-tuning of ink properties to achieve high-resolution printing and homogeneous coating are also highlighted.

MATERIALS TODAY (2021)

添加到收藏夹

Article Chemistry, Physical

Controlling the Defect Density of Perovskite Films by MXene/SnO2 Hybrid Electron Transport Layers for Efficient and Stable Photovoltaics

Huanhuan Zheng et al.

Summary: This study utilized a hybrid film of SnO2 nanoparticles and Ti3C2Tx MXene nanoflakes as the electron transport layer in PSCs, which effectively controlled the quality of the top perovskite layers by adjusting the Ti3C2Tx/SnO2 ratios, leading to reduced defect density and improved efficiency and stability of the devices.

JOURNAL OF PHYSICAL CHEMISTRY C (2021)

添加到收藏夹

Review Chemistry, Physical

A Review on Additives for Halide Perovskite Solar Cells

Shuang Liu et al.

ADVANCED ENERGY MATERIALS (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Recent Advances in 2D MXenes for Photodetection

Hao Xu et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Scalable Manufacturing of Free-Standing, Strong Ti3C2Tx MXene Films with Outstanding Conductivity

Jizhen Zhang et al.

ADVANCED MATERIALS (2020)

添加到收藏夹

Article Multidisciplinary Sciences

Efficient, stable silicon tandem cells enabled by anion-engineered wide-bandgap perovskites

Daehan Kim et al.

SCIENCE (2020)

添加到收藏夹

Review Chemistry, Physical

Monolithic Perovskite Tandem Solar Cells: A Review of the Present Status and Advanced Characterization Methods Toward 30% Efficiency

Marko Jost et al.

ADVANCED ENERGY MATERIALS (2020)

添加到收藏夹

Review Chemistry, Multidisciplinary

Perovskite Tandem Solar Cells: From Fundamentals to Commercial Deployment

Hui Li et al.

CHEMICAL REVIEWS (2020)

添加到收藏夹

Review Nanoscience & Nanotechnology

Insights into Ultrafast Carrier Dynamics in Perovskite Thin Films and Solar Cells

Chengbo Li et al.

ACS PHOTONICS (2020)

添加到收藏夹

Article Chemistry, Physical

Current Density Mismatch in Perovskite Solar Cells

Michael Saliba et al.

ACS ENERGY LETTERS (2020)

添加到收藏夹

Article Chemistry, Physical

Energy Yield Advantages of Three-Terminal Perovskite-Silicon Tandem Photovoltaics

Fabrizio Gota et al.

JOULE (2020)

添加到收藏夹

Article Energy & Fuels

Sub-micrometer random-pyramid texturing of silicon solar wafers with excellent surface passivation and low reflectance

Abdulwahab Alasfour et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2020)

添加到收藏夹

Article Chemistry, Physical

Mechanically Stacked, Two-Terminal Graphene-Based Perovskite/Silicon Tandem Solar Cell with Efficiency over 26%

Enrico Lamanna et al.

JOULE (2020)

添加到收藏夹

Article Chemistry, Physical

A flexible semitransparent photovoltaic supercapacitor based on water-processed MXene electrodes

Leiqiang Qin et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

添加到收藏夹

Article Chemistry, Physical

MXene-Contacted Silicon Solar Cells with 11.5% Efficiency

Hui-Chun Fu et al.

ADVANCED ENERGY MATERIALS (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Interface Molecular Engineering for Laminated Monolithic Perovskite/Silicon Tandem Solar Cells with 80.4% Fill Factor

Cesar Omar Ramirez Quiroz et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

添加到收藏夹

Article Chemistry, Physical

Titanium-carbide MXenes for work function and interface engineering in perovskite solar cells

A. Agresti et al.

NATURE MATERIALS (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

Light Processing Enables Efficient Carbon-Based, All-Inorganic Planar CsPbIBr2 Solar Cells with High Photovoltages

Qianni Zhang et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

添加到收藏夹

Article Chemistry, Physical

Two-terminal mechanical perovskite/silicon tandem solar cells with transparent conductive adhesives

In Young Choi et al.

NANO ENERGY (2019)

添加到收藏夹

Review Chemistry, Physical

Review of MXenes as new nanomaterials for energy storage/delivery and selected environmental applications

Byung-Moon Jun et al.

NANO RESEARCH (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Oxide Thin-Film Electronics using All-MXene Electrical Contacts

Zhenwei Wang et al.

ADVANCED MATERIALS (2018)

添加到收藏夹

Article Chemistry, Physical

Fully textured monolithic perovskite/silicon tandem solar cells with 25.2% power conversion efficiency

Florent Sahli et al.

NATURE MATERIALS (2018)

添加到收藏夹

Article Chemistry, Physical

Intermolecular Exchange Boosts Efficiency of Air-Stable, Carbon-Based All-Inorganic Planar CsPbIBr2 Perovskite Solar Cells to Over 9%

Weidong Zhu et al.

ADVANCED ENERGY MATERIALS (2018)

添加到收藏夹

Article Chemistry, Physical

Facile fabrication method of small-sized crystal silicon solar cells for ubiquitous applications and tandem device with perovskite solar cells

Hiroyuki Kanda et al.

MATERIALS TODAY ENERGY (2018)

添加到收藏夹

Article Nanoscience & Nanotechnology

Interface Optoelectronics Engineering for Mechanically Stacked Tandem Solar Cells Based on Perovskite and Silicon

Hiroyuki Kanda et al.

ACS APPLIED MATERIALS & INTERFACES (2016)

添加到收藏夹

Article Nanoscience & Nanotechnology

Fabrication of Ti3C2Tx MXene Transparent Thin Films with Tunable Optoelectronic Properties

Kanit Hantanasirisakul et al.

ADVANCED ELECTRONIC MATERIALS (2016)

添加到收藏夹

Article Multidisciplinary Sciences

Interface engineering of highly efficient perovskite solar cells

Huanping Zhou et al.

SCIENCE (2014)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.