☆ 4.8 Article

Amino Pyridine Iodine as an Additive for Defect-Passivated Perovskite Solar Cells

ACS APPLIED MATERIALS & INTERFACES (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Review Materials Science, Multidisciplinary

Recent progress in hydrogen: From solar to solar cell

Yanlin Li et al.

Summary: This paper provides an overview of hydrogen progress from solar energy to solar cells, with a focus on photovoltaic-electrolysis and photoelectrochemical/photovoltaic systems. Both systems have achieved a solar-to-hydrogen efficiency of over 10% and show great potential for large-scale application. The challenges and opportunities in this field, including configuration design, electrode materials, and performance evaluation, are summarized. The paper also analyzes and presents perspectives on the potential commercial application and further scientific research for the development of solar-to-hydrogen.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2024)

添加到收藏夹

Article Multidisciplinary Sciences

Unveiling facet-dependent degradation and facet engineering for stable perovskite solar cells

Chunqing Ma et al.

Summary: Many studies have been conducted to improve the stability of perovskite films, but the role of different perovskite crystal facets in stability remains unknown. In this study, we investigate the underlying mechanisms of facet-dependent degradation of formamidinium lead iodide (FAPbI3) films. We find that the (100) facet is more susceptible to moisture-induced degradation than the (111) facet. Through experimental and theoretical studies, we uncover the degradation mechanisms and observe a d-phase transition on the (100) facet due to strong water adhesion and elongated lead-iodine (Pb-I) bond distance. Manipulating the crystal structure to achieve a higher fraction of the (111) facet leads to exceptional stability of FAPbI3 films against moisture. Our findings provide insights into unknown facet-dependent degradation mechanisms and kinetics.

SCIENCE (2023)

添加到收藏夹

Article Chemistry, Physical

Modulating Residual Lead Iodide via Functionalized Buried Interface for Efficient and Stable Perovskite Solar Cells

Chunyan Deng et al.

Summary: By functionalizing the buried interface using DDSI2, the distribution and size of PbI2 clusters can be modulated, leading to improved performance of perovskite films. DDSI2 serves as a multifunctional modifier that optimizes the energy level of SnO2 and passivates buried interface defects. The hydrogen bonding and coordination between DDSI2 and perovskite reduce crystal growth rate and lattice stress, resulting in enhanced perovskite quality and modulated PbI2 distribution. The DDSI2-modified device exhibits a power conversion efficiency of 24.10% and a storage stability of 1800 h, demonstrating a unique strategy for the rational control of PbI2 in efficient and stable perovskite solar cells.

ACS ENERGY LETTERS (2023)

添加到收藏夹

Article Multidisciplinary Sciences

Stability-limiting heterointerfaces of perovskite photovoltaics

Shaun Tan et al.

Summary: Optoelectronic devices rely on heterointerfaces between different semiconducting materials, and the energy-level alignment between them plays a crucial role in device performance. Surface treatments for perovskite solar cells can impact the energetics of the heterointerface, potentially affecting device stability. Balancing the pros and cons of surface treatments is essential for improving PSC stability.

NATURE (2022)

添加到收藏夹

Article Chemistry, Applied

Excess PbI2 evolution for triple-cation based perovskite solar cells with 21.9% efficiency

Zhu Ma et al.

Summary: CsFAMA mixed perovskites show increased power conversion efficiency over time, with PbI2 playing a role in defect passivation in the perovskite film. The study explores the relationship between enhanced device performance, excess PbI2, and PbI2 evolution in triple cation perovskite films.

JOURNAL OF ENERGY CHEMISTRY (2022)

添加到收藏夹

Article Chemistry, Physical

Multiple bonding effects of 1-methanesulfonyl-piperazine on the two-step processed perovskite towards efficient and stable solar cells

Xin Yu et al.

Summary: In this study, interfacial engineering was used to improve the device performance of perovskite solar cells (PSCs). A new multifunctional molecule, 1-methanesulfonyl-piperazine (MP), was introduced to modify the perovskite film fabricated through a two-step process. The MP passivation resulted in reduced trap density and suppressed non-radiative recombination, as well as improved crystallinity and decreased residuals. The MP-modified devices exhibited impressive power conversion efficiency (PCE) and enhanced stability.

NANO ENERGY (2022)

添加到收藏夹

Article Chemistry, Physical

Constructing 2D passivation layer on perovskites based on 3-chlorobenzylamine enables efficient and stable perovskite solar cells

Hongbing Ran et al.

Summary: The use of a 3D perovskite passivation layer formed by 3-chlorobenzylamine (3Cl-BA) has been shown to improve the energy conversion efficiency and moisture stability of carbon-based hole transport layer-free perovskite solar cells (PSCs).

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

添加到收藏夹

Article Multidisciplinary Sciences

Inactive (PbI2)2RbCl stabilizes perovskite films for efficient solar cells

Yang Zhao et al.

Summary: In halide perovskite solar cells, introducing RbCl doping effectively stabilizes the perovskite phase by converting excess PbI2 into an inactive compound. This strategy achieved a certified PCE of 25.6% for FAPbI(3) perovskite solar cells, with high device stability and minimal hysteresis effects.

SCIENCE (2022)

添加到收藏夹

Article Engineering, Environmental

Heterogeneous lead iodide obtains perovskite solar cells with efficiency of 24.27%

Qianyu Liu et al.

Summary: Researchers have achieved defect-free, high-quality perovskite films with improved power conversion efficiency in perovskite solar cells through adjusting the lead iodide intermediate films in a two-step sequential deposition.

CHEMICAL ENGINEERING JOURNAL (2022)

添加到收藏夹

Article Engineering, Environmental

Lewis base governing superfacial proton behavior of hybrid perovskite: Basicity dependent passivation strategy

Wanxian Cai et al.

Summary: This study investigates the behavior of protons in hybrid perovskites induced by Lewis base and their impact on the lattice structure and charge transfer kinetics in perovskite solar cells. It is found that the basicity of the Lewis base affects the stability of the organic species on the perovskite surface and the interfacial charge transport. By regulating the proton behavior, the power conversion efficiency is significantly improved, and the operational stability is enhanced.

CHEMICAL ENGINEERING JOURNAL (2022)

添加到收藏夹

Article Chemistry, Physical

Dual-Site Synergistic Passivation for Highly Efficient and Stable Perovskite Solar Cells

Wenyuan Zhang et al.

Summary: This work demonstrates the dual-site synergistic passivation of 1H-benzimidazole and its effect on improving the efficiency, stability, and long-term operational stability of perovskite solar cells. The study also provides insights and strategies for the application of benzimidazole derivatives in the field of photovoltaics.

ADVANCED ENERGY MATERIALS (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Pyridine Derivatives' Surface Passivation Enables Efficient and Stable Carbon-Based Perovskite Solar Cells

Kai Zou et al.

Summary: Surface passivation is an effective strategy to reduce defects in perovskite solar cells. In this study, the passivation effects of pyridine and its derivatives with different functional groups were compared. Py-NH2 was found to be the best passivation agent, reducing defect density and improving conversion efficiency and long-term stability in carbon-based perovskite solar cells.

ACS MATERIALS LETTERS (2022)

添加到收藏夹

Article Engineering, Environmental

Understanding steric-charge-dependence of conjugated passivators on p-Pb2+ bond strength for efficient all-inorganic perovskite solar cells

Junshuai Zhang et al.

Summary: This study investigates the effects of various pi-conjugated pyridine derivatives on the electron-donating ability and photovoltaic performances of inorganic CsPbIBr2 perovskite film. The results demonstrate that the coordination sites and structure hindrance play a crucial role in determining the photovoltaic performances. The bipyridine passivated device shows improved efficiency and stability.

CHEMICAL ENGINEERING JOURNAL (2022)

添加到收藏夹

Article Chemistry, Physical

Scalable Fabrication of >90 cm2 Perovskite Solar Modules with >1000 h Operational Stability Based on the Intermediate Phase Strategy

Guoqing Tong et al.

Summary: The study introduces a strategy to fabricate large-area uniform and dense perovskite films with the addition of NH4Cl to the precursor solution. The resulting perovskite solar modules demonstrate high efficiency and good operational stability, exceeding 1600 hours of T-80 lifetime for the 5 x 5 cm^2 module.

ADVANCED ENERGY MATERIALS (2021)

添加到收藏夹

Article Chemistry, Applied

Surface passivation using pyridinium iodide for highly efficient planar perovskite solar cells

Yitian Du et al.

Summary: The use of an organic halide salt to passivate surface defects in perovskite solar cells resulted in improved efficiency and stability, with the treated device achieving higher performance compared to untreated and differently treated devices in the same experimental conditions.

JOURNAL OF ENERGY CHEMISTRY (2021)

添加到收藏夹

Article Chemistry, Physical

Targeted Distribution of Passivator for Polycrystalline Perovskite Light-Emitting Diodes with High Efficiency

Xuefeng Peng et al.

Summary: The study found that the BMIM+ ions of the 1-butyl-3-methylimidazolium tetrafluoroborate (BMIMBF4) ionic liquid effectively passivate the Pb-related defects in perovskite light emitting diodes, resulting in sufficient defect passivation and improved photoluminescence quantum yields and external quantum efficiency. This work demonstrates the potential of ionic liquid passivators for high efficiency PeLEDs and emphasizes the importance of passivator spatial distribution for adequate defect passivation.

ACS ENERGY LETTERS (2021)

添加到收藏夹

Article Multidisciplinary Sciences

Stabilizing black-phase formamidinium perovskite formation at room temperature and high humidity

Wei Hui et al.

Summary: A new method for synthesizing stable black-phase formamidinium lead iodide (α-FAPbI(3)) was reported, which enables the stable synthesis of α-FAPbI(3) under high temperature and humidity conditions, and maintains high efficiency under light stress.

SCIENCE (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Self-Induced Type-I Band Alignment at Surface Grain Boundaries for Highly Efficient and Stable Perovskite Solar Cells

Chao Luo et al.

Summary: By controlling the moisture condensation at the surface of perovskite films through constructing an ultralow surface temperature, a beneficial surface type-I band alignment is formed to avoid carrier loss at the film surface. This innovation significantly boosts the power conversion efficiency of solar cells.

ADVANCED MATERIALS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Fluoroarene derivative based passivation of perovskite solar cells exhibiting excellent ambient and thermo-stability achieving efficiency >20%

Maimur Hossain et al.

Summary: Fluoroaromatic amine additives were used to passivate hybrid perovskite solar cells, significantly enhancing their stability and efficiency. Among these additives, PFA showed the most remarkable improvement in both moisture and thermo-stability of the devices.

JOURNAL OF MATERIALS CHEMISTRY C (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Boosted charge extraction of NbOx-enveloped SnO2 nanocrystals enables 24% efficient planar perovskite solar cells

Ruihan Yuan et al.

Summary: In this study, low-temperature processed SnO2/NbOx nanocrystals were reported as efficient electron transport materials (ETMs) for planar perovskite solar cells (PSCs), achieving an impressive power conversion efficiency (PCE) of 24.01% with remarkable device stability. The NbOx layer passivates defects, promotes charge extraction, and improves perovskite film crystallinity, leading to enhanced device performance. This work provides a facile approach for low-temperature processed ETMs with boosted carrier extraction ability, offering excellent efficiency and stability for planar PSCs.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

A Nontoxic Bifunctional (Anti)Solvent as Digestive-Ripening Agent for High-Performance Perovskite Solar Cells

Yikai Yun et al.

ADVANCED MATERIALS (2020)

添加到收藏夹

Article Chemistry, Physical

Efficient CH3NH3PbI3-x(SeCN)x perovskite solar cells with improved crystallization and defect passivation

Zhu Ma et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Precise Control of Perovskite Crystallization Kinetics via Sequential A-Site Doping

Minchao Qin et al.

ADVANCED MATERIALS (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Oxidization-Free Spiro-OMeTAD Hole-Transporting Layer for Efficient CsPbI2Br Perovskite Solar Cells

Zhu Ma et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

添加到收藏夹

Article Chemistry, Physical

Efficient and Stable Chemical Passivation on Perovskite Surface via Bidentate Anchoring

Hao Zhang et al.

ADVANCED ENERGY MATERIALS (2019)

添加到收藏夹

Article Optics

Surface passivation of perovskite film for efficient solar cells

Qi Jiang et al.

NATURE PHOTONICS (2019)

添加到收藏夹

Article Chemistry, Physical

Optimal Interfacial Engineering with Different Length of Alkylammonium Halide for Efficient and Stable Perovskite Solar Cells

Hyeonwoo Kim et al.

ADVANCED ENERGY MATERIALS (2019)

添加到收藏夹

Article Chemistry, Physical

Facet-Dependent Control of PbI2 Colloids for over 20% Efficient Perovskite Solar Cells

Chenxin Ran et al.

ACS ENERGY LETTERS (2019)

添加到收藏夹

Article Chemistry, Physical

Multi-cation Synergy Suppresses Phase Segregation in Mixed-Halide Perovskites

Hoang X. Dang et al.

JOULE (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

High-Purity Inorganic Perovskite Films for Solar Cells with 9.72% Efficiency

Jialong Duan et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2018)

添加到收藏夹

Article Crystallography

Improved performance of mesostructured perovskite solar cells via an anti-solvent method

Jiabin Hao et al.

JOURNAL OF CRYSTAL GROWTH (2018)

添加到收藏夹

Article Chemistry, Physical

MAPbCI3-Mediated Decomposition Process to Tune Cl/Pbl2 Distribution in MAPbl3 Films

Cuiping Zhang et al.

ACS ENERGY LETTERS (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Design of an Inorganic Mesoporous Hole-Transporting Layer for Highly Efficient and Stable Inverted Perovskite Solar Cells

Yu Chen et al.

ADVANCED MATERIALS (2018)

添加到收藏夹

Article Chemistry, Physical

Control of Electrical Potential Distribution for High-Performance Perovskite Solar Cells

Molang Cai et al.

JOULE (2018)

添加到收藏夹

Article Chemistry, Physical

Mesoporous PbI2 assisted growth of large perovskite grains for efficient perovskite solar cells based on ZnO nanorods

Shibin Li et al.

JOURNAL OF POWER SOURCES (2017)

添加到收藏夹

Article Multidisciplinary Sciences

Efficient and stable solution-processed planar perovskite solar cells via contact passivation

Hairen Tan et al.

SCIENCE (2017)

添加到收藏夹

Article Energy & Fuels

Defect passivation in hybrid perovskite solar cells using quaternary ammonium halide anions and cations

Xiaopeng Zheng et al.

NATURE ENERGY (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

Exploration of the compositional space for mixed lead halogen perovskites for high efficiency solar cells

T. Jesper Jacobsson et al.

ENERGY & ENVIRONMENTAL SCIENCE (2016)

添加到收藏夹

Article Chemistry, Multidisciplinary

Light-induced annihilation of Frenkel defects in organo-lead halide perovskites

Edoardo Mosconi et al.

ENERGY & ENVIRONMENTAL SCIENCE (2016)

添加到收藏夹

Article Energy & Fuels

Functionalization of perovskite thin films with moisture-tolerant molecules

Shuang Yang et al.

NATURE ENERGY (2016)

添加到收藏夹

Article Chemistry, Physical

Temperature- and Component-Dependent Degradation of Perovskite Photovoltaic Materials under Concentrated Sunlight

Ravi K. Misra et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2015)

添加到收藏夹

Article Multidisciplinary Sciences

High-performance photovoltaic perovskite layers fabricated through intramolecular exchange

Woon Seok Yang et al.

SCIENCE (2015)

添加到收藏夹

Article Chemistry, Multidisciplinary

Controllable Self-Induced Passivation of Hybrid Lead Iodide Perovskites toward High Performance Solar Cells

Qi Chen et al.

NANO LETTERS (2014)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.