☆ 4.7 Article

Long-term volume stability of ECC containing high-volume steel slag

CEMENT & CONCRETE COMPOSITES (2024)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Construction & Building Technology

Micromechanics-based model of single crack propagation in Engineered cementitious composites (ECC)

Cong Lu et al.

Summary: In this study, a micromechanics-based crack propagation model for ECC under bending load is developed to guide the design of flexural performance of ECC. The entire crack propagation process is simulated by considering the microstructure of ECC and the crack propagation criterion, and the simulated results agree well with experimental results. Insights from this model can facilitate the design of ECC members with excellent bending properties through fiber tailoring and surface treatment.

CONSTRUCTION AND BUILDING MATERIALS (2023)

添加到收藏夹

Article Construction & Building Technology

Mechanical properties and microstructure of engineered cementitious composites with high volume steel slag and GGBFS

Xiaoli Xiong et al.

Summary: In this study, steel slag (SS) and ground granulated blast furnace slag (GGBFS) were introduced into engineered cementitious composites (ECC) to reduce the reliance on cement. The effects of SS and GGBFS content on the mechanical performance of ECC were analyzed at macro and micro scales. It was found that SS enhanced fiber dispersion and the combination of GGBFS and SS achieved ideal toughness. Substituting 30% SS and 30% GGBFS for cement led to a significant reduction in energy consumption and CO2 emissions of ECC.

CONSTRUCTION AND BUILDING MATERIALS (2023)

添加到收藏夹

Article Construction & Building Technology

Chloride penetration and binding behavior in unsaturated alkali-activated slag mortars

Yong Zhang et al.

Summary: A comprehensive study was conducted on chloride penetration of unsaturated alkali-activated slag (AAS) mortars, including detailed microstructure analyses and mass transport investigations. The study explored the impact of chloride binding behaviors on unsaturated chloride penetrations under diffusion and sorption cases. It was found that AAS mortars with lower saturation have slower chloride diffusion but larger chloride penetration under wetting-drying cycles. It was also observed that slag mortars with sodium hydroxide activation exhibit higher chloride binding capacity compared to sodium silicate activated slag mortars.

CEMENT & CONCRETE COMPOSITES (2023)

添加到收藏夹

Article Construction & Building Technology

Feasibility of ECC with high contents of post-processed bagasse ash as partial cement replacement

Sujata Subedi et al.

Summary: The study found that with an increase in PBA content, workability and compressive strength of the composite materials decreased while surface resistivity increased. PBA composites outperformed those using FA in terms of compressive strength and surface resistivity, but exhibited shortcomings in crack-tip fracture toughness and tensile strength of the concrete.

CONSTRUCTION AND BUILDING MATERIALS (2022)

添加到收藏夹

Article Construction & Building Technology

Insights to compressive strength, impermeability and microstructure of micro-expansion steel slag cement under constraint conditions

Shuo Dai et al.

Summary: This work evaluates the influence of steel slag as partial replacement of cement on the mechanical properties and impermeability of cement-based materials under constraint conditions. The results show that the setting time of the wet-grinding steel slag system is shortened and the free expansion rate is increased compared to the raw steel slag. When the wet-grinding steel slag content is 10%, the specimen (constraint) has the highest compressive strength after 28 days of curing, reaching 68.5 MPa, which is 9.3% higher than the free curing specimen, and it also exhibits the best impermeability. Under constraint conditions, the expansion strain caused by steel slag leads to a compact sample structure and reduced porosity, which is beneficial to the mechanical properties and compactness of the pore structure of cement paste.

CONSTRUCTION AND BUILDING MATERIALS (2022)

添加到收藏夹

Article Green & Sustainable Science & Technology

Effect of pretreated cow dung fiber on mechanical and shrinkage properties of cementitious composites

Kang Li et al.

Summary: In this study, cow dung was processed into cheap renewable cow dung fiber (CDF) and applied in cementitious composites. The alkali pretreatment of CDF enhanced its crystallinity and significantly increased the strength of the composites. The presence of CDF inhibited the autogenous shrinkage of the cementitious paste. This work is expected to promote the recycling of cow dung waste in sustainable building materials.

JOURNAL OF CLEANER PRODUCTION (2022)

添加到收藏夹

Article Construction & Building Technology

Effect of superabsorbent polymer introduction on properties of alkali-activated slag mortar

Zhengxian Yang et al.

Summary: This paper investigates the effects of superabsorbent polymer (SAP) on the properties of alkali-activated slag (AAS) mortar, including workability, strength, permeability, and frost resistance. The study finds that the flowability of AAS mortar decreases with increased SAP dosage, but strength, permeability, and frost resistance increase. Wet mixing of SAP has a more pronounced effect on mitigating autogenous shrinkage and improving frost resistance.

CONSTRUCTION AND BUILDING MATERIALS (2022)

添加到收藏夹

Article Construction & Building Technology

Enhancing long-term tensile performance of Engineered Cementitious Composites (ECC) using sustainable artificial geopolymer aggregates

Ling-Yu Xu et al.

Summary: Artificial geopolymer aggregate is a new technology that aims to reduce the exploitation of natural aggregates and the burden of waste accumulation. This study utilized geopolymer aggregates to enhance the long-term tensile performance of high-strength Engineered Cementitious Composites (ECC). The results showed that GPA-ECC exhibited better tensile performance and ductility compared to conventional FSS-ECC. A cost analysis demonstrated the cost-efficiency and sustainability of GPA-ECC.

CEMENT & CONCRETE COMPOSITES (2022)

添加到收藏夹

Article Construction & Building Technology

Material processing, microstructure, and composite properties of low carbon Engineered Cementitious Composites (ECC)

Mengjun Hou et al.

Summary: The aim of this study was to develop a low embodied carbon ECC material for infrastructure applications. The interrelations between material processing, microstructure, and composite properties were experimentally studied, and it was found that high tensile ductility and tight crack width can be achieved.

CEMENT & CONCRETE COMPOSITES (2022)

添加到收藏夹

Article Construction & Building Technology

A reappraisal of the ink-bottle effect and pore structure of cementitious materials using intrusion-extrusion cyclic mercury porosimetry

Yong Zhang et al.

Summary: Reliable characterization of the pore structure in cementitious materials is crucial for durability studies. Commonly used mercury intrusion porosimetry is affected by the ink-bottle effect, which affects the accuracy of pore size measurement. Two alternative methods, pressurization-depressurization cycling and intrusion-extrusion cyclic mercury porosimetry, have been developed to improve pore size estimation in cementitious materials.

CEMENT AND CONCRETE RESEARCH (2022)

添加到收藏夹

Review Construction & Building Technology

Influence of supplementary cementitious materials, curing conditions and mixing ratios on fresh and mechanical properties of engineered cementitious composites-A review

N. Shanmugasundaram et al.

Summary: ECC is a new type of fibre-reinforced bendable cementitious composite with high mechanical and durable properties. The incorporation of different materials plays a vital role in enhancing the properties of ECC, but improper selection of materials, curing conditions, and mixing ratios can have adverse effects. Detailed studies on material incorporation behavior, curing conditions, and experimental details are crucial for improving the fresh and mechanical properties of ECC.

CONSTRUCTION AND BUILDING MATERIALS (2021)

添加到收藏夹

Article Green & Sustainable Science & Technology

Use of Iron and Steel Slags in Concrete: State of the Art and Future Perspectives

Alan Piemonti et al.

Summary: Global production of pig iron and steel has significantly increased in the past two decades, resulting in a considerable rise in the production of different types of slags. Literature suggests various possible reuses for these slags, such as in bituminous conglomerates, hydraulic engineering, metallurgy, and fertilizers. This paper provides an overview of slags production, their characteristics, and their reuse in concrete, with a focus on electric arc furnace slags (EAF) as the most produced type in Italy. Gaps for further studies have been identified based on a comprehensive literature review.

SUSTAINABILITY (2021)

添加到收藏夹

Article Construction & Building Technology

Seawater sea-sand engineered/strain-hardening cementitious composites (ECC/SHCC): Assessment and modeling of crack characteristics

Bo-Tao Huang et al.

Summary: This study assesses and models the crack characteristics of Seawater sea-sand Engineered Cementitious Composites (SS-ECC), exploring the influence of sea-sand size, fiber length, and fiber dosage. Proposed methods, including a five-dimensional representation and a probabilistic model, facilitate the design of SS-ECC in marine and coastal structures by considering crack characteristics and mechanical properties comprehensively.

CEMENT AND CONCRETE RESEARCH (2021)

添加到收藏夹

Article Construction & Building Technology

Inhibition mechanisms of steel slag on the early-age hydration of cement

Shiyu Zhuang et al.

Summary: Steel slag inhibits the early-age hydration of cement by slowing the depletion of gypsum, reducing the formation of ettringite, and significantly inhibiting the precipitation of CH and C-S-H.

CEMENT AND CONCRETE RESEARCH (2021)

添加到收藏夹

Article Construction & Building Technology

Flexural toughness of sustainable ECC with high-volume substitution of cement and silica sand

Kazim Turk et al.

Summary: The study found that limestone filler did not significantly affect the flexural toughness of ECC, while the flexural toughness decreased with increasing fly ash content. ECC with high fly ash content and no limestone filler demonstrated higher ductility at all curing ages.

CONSTRUCTION AND BUILDING MATERIALS (2021)

添加到收藏夹

Article Construction & Building Technology

Surface etching and early age hydration mechanisms of steel slag powder with formic acid

Binbin Huo et al.

Summary: By employing dry chemical etching technology with formic acid, the surface roughness and mineral composition of steel slag powder were modified, resulting in higher specific surface area and hydraulic reactivity, leading to improved early-age compressive strength and soundness. Boiling and autoclaved curing tests showed much better soundness performances for formic acid etched steel slag powder pastes and blended cement pastes, indicating a promising approach for efficient and safe utilization of steel slag powder as supplementary cementitious material.

CONSTRUCTION AND BUILDING MATERIALS (2021)

添加到收藏夹

Article Construction & Building Technology

The influence of fiber type and length on the cracking resistance, durability and pore structure of face slab concrete

Lei Wang et al.

Summary: This study demonstrates that PVA fibers are most effective in improving the cracking resistance and durability of face slab concrete. Increasing fiber length significantly enhances the cracking resistance and frost resistance of concrete.

CONSTRUCTION AND BUILDING MATERIALS (2021)

添加到收藏夹

Article Construction & Building Technology

Preparation and properties of ready-to-use low-density foamed concrete derived from industrial solid wastes

Shizhao Yang et al.

Summary: By utilizing sulfoaluminate high-activity material (SHAM) and hydroxypropyl methylcellulose (HPMC), we have successfully developed ready-to-use low-density foamed concrete (RLFC) with high strength and low density. This method not only consumes industrial solid waste, but also achieves energy-saving and environmentally friendly effects.

CONSTRUCTION AND BUILDING MATERIALS (2021)

添加到收藏夹

Article Construction & Building Technology

Combined influence of nano-CaCO3 and polyvinyl alcohol fibers on fresh and mechanical performance of concrete incorporating fly ash

Peng Zhang et al.

STRUCTURAL CONCRETE (2020)

添加到收藏夹

Review Construction & Building Technology

Multiscale X-ray tomography of cementitious materials: A review

Sebastien Brisard et al.

CEMENT AND CONCRETE RESEARCH (2020)

添加到收藏夹

Article Construction & Building Technology

Evaluation of cement soundness using the ASTM C151 autoclave expansion test

H. Kabir et al.

CEMENT AND CONCRETE RESEARCH (2020)

添加到收藏夹

Article Engineering, Civil

Correlation of chloride diffusion coefficient and microstructure parameters in concrete: A comparative analysis using NMR, MIP, and X-CT

Yurong Zhang et al.

FRONTIERS OF STRUCTURAL AND CIVIL ENGINEERING (2020)

添加到收藏夹

Article Construction & Building Technology

The curing times effect on the strength of ground granulated blast furnace slag (GGBFS) mortar

Chin Mei Yun et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

添加到收藏夹

Article Construction & Building Technology

Foaming characteristics and microstructure of aerated steel slag block prepared by accelerated carbonation

Jun Chang et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

添加到收藏夹

Article Construction & Building Technology

Multi-scale evaluation of hybrid fiber restraint of alkali-silica reaction expansion in concrete

Gabriel Jen et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

添加到收藏夹

Article Construction & Building Technology

Effect of shrinkage-reducing admixture and expansive agent on mechanical properties and drying shrinkage of Engineered Cementitious Composite (ECC)

Shuling Gao et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

添加到收藏夹

Review Green & Sustainable Science & Technology

A review of steel slag usage in construction industry for sustainable development

Isa Yuksel

ENVIRONMENT DEVELOPMENT AND SUSTAINABILITY (2017)

添加到收藏夹

Article Green & Sustainable Science & Technology

Research on mineral characteristics of converter steel slag and its comprehensive utilization of internal and external recycle

Jihui Zhao et al.

JOURNAL OF CLEANER PRODUCTION (2017)

添加到收藏夹

Article Construction & Building Technology

The soundness of steel slag with different free CaO and MgO contents

Qiang Wang et al.

CONSTRUCTION AND BUILDING MATERIALS (2017)

添加到收藏夹

Article Construction & Building Technology

Soundness and compressive strength of Portland cement blended with ground granulated ferronickel slag

Muhammad Ashiqur Rahman et al.

CONSTRUCTION AND BUILDING MATERIALS (2017)

添加到收藏夹

Article Construction & Building Technology

Characteristics of dry shrinkage and temperature shrinkage of cement-stabilized steel slag

Wei Li et al.

CONSTRUCTION AND BUILDING MATERIALS (2017)

添加到收藏夹

Article Thermodynamics

Hydration properties of steel slag under autoclaved condition

Qiang Wang et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2015)

添加到收藏夹

Article Construction & Building Technology

Early age stability of concrete pavement by using hybrid fiber together with MgO expansion agent in high altitude locality

Kaijian Huang et al.

CONSTRUCTION AND BUILDING MATERIALS (2013)

添加到收藏夹

Article Construction & Building Technology

Frost resistance and microstructure of Engineered Cementitious Composites: Influence of fly ash and micro poly-vinyl-alcohol fiber

Mustafa Sahmaran et al.

CEMENT & CONCRETE COMPOSITES (2012)

添加到收藏夹

Article Construction & Building Technology

Effect of blended steel slag-GBFS mineral admixture on hydration and strength of cement

Qiang Wang et al.

CONSTRUCTION AND BUILDING MATERIALS (2012)

添加到收藏夹

Article Engineering, Environmental

A discussion on improving hydration activity of steel slag by altering its mineral compositions

Qiang Wang et al.

JOURNAL OF HAZARDOUS MATERIALS (2011)

添加到收藏夹

Article Construction & Building Technology

Investigation on phosphogypsum-steel slag-granulated blast-furnace slag-limestone cement

Yun Huang et al.

CONSTRUCTION AND BUILDING MATERIALS (2010)

添加到收藏夹

Article Construction & Building Technology

Engineered cementitious composite with characteristic of low drying shrinkage

Jun Zhang et al.

CEMENT AND CONCRETE RESEARCH (2009)

添加到收藏夹

Article Construction & Building Technology

Properties and hydration of blended cements with steelmaking slag

S. Kourounis et al.

CEMENT AND CONCRETE RESEARCH (2007)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.