相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Mixed-mode I/II fracture properties and failure characteristics of microwave-irradiated basalt: An experimental study
Zheng Yang et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2023)
Mixed mode fracture parameters and fracture characteristics of diorite using cracked straight through Brazilian disc specimen
Quanqi Zhu et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2023)
A review of mixed mode I-II fracture criteria and their applications in brittle or quasi-brittle fracture analysis
Wen Hua et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2023)
Experimental study on mode I and mode II fracture properties of heated sandstone after two different cooling treatments
Wen Hua et al.
GEOMECHANICS FOR ENERGY AND THE ENVIRONMENT (2023)
Experimental study on the quasi-static loading rate dependency of mixed-mode I/II fractures for marble rocks
Jian Liu et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2022)
An extended maximum tangential strain energy density criterion considering T-stress for combined mode I-III brittle fracture
Wen Hua et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2021)
Loading rate effect on mixed mode I/II brittle fracture behavior of PMMA using inclined cracked SBB specimen
M. R. M. Aliha et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2021)
Analysis of Mixed-Mode I/II/III Fracture Toughness Based on a Three-Point Bending Sandstone Specimen with an Inclined Crack
Xin Pan et al.
APPLIED SCIENCES-BASEL (2021)
Sub-sized short bend beam configuration for the study of mixed-mode fracture
M. R. M. Aliha et al.
ENGINEERING FRACTURE MECHANICS (2020)
Effects of biocompatible Nanofillers on mixed-mode I and II fracture toughness of PMMA base dentures
A. Mousavi et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2020)
On the use of edge cracked short bend beam specimen for PMMA fracture toughness testing under mixed-mode I/II
S. S. Mousavi et al.
POLYMER TESTING (2020)
Experimental Study on Mixed Mode Fracture Behavior of Sandstone under Water-Rock Interactions
Wen Hua et al.
PROCESSES (2019)
Aging effect on combined mode fracture resistance of bitumen
Saied Shaker et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2019)
A generalized maximum energy release rate criterion for mixed mode fracture analysis of brittle and quasi-brittle materials
Cheng Hou et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2019)
EMTSN criterion for evaluating mixed mode I/II crack propagation in rock materials
M. M. Mirsayar et al.
ENGINEERING FRACTURE MECHANICS (2018)
Effect of T-stress on the initial fracture toughness of concrete under I/II mixed-mode loading
Yanhua Zhao et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2018)
The role of first non-singular stress terms in mixed mode brittle fracture of V-notched components: an experimental study
M. Dehghany et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2017)
Fracture prediction of rocks under mode I and mode II loading using the generalized maximum tangential strain criterion
Ming-Dong Wei et al.
ENGINEERING FRACTURE MECHANICS (2017)
Investigation on the correlation of mode II fracture toughness of sandstone with tensile strength
Wen Hua et al.
ENGINEERING FRACTURE MECHANICS (2017)
Mixed mode fracture analysis of CCBD specimens based on the extended maximum tangential strain criterion
W. Hua et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2017)
Experimental investigation on the effect of wetting-drying cycles on mixed mode fracture toughness of sandstone
Wen Hua et al.
INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2017)
Mixed mode fracture analysis using generalized averaged strain energy density criterion for linear elastic materials
M. Rashidi Moghaddam et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2017)
Mixed mode fracture analysis of semi-circular bend (SCB) specimen: A numerical study based on extended finite element method
Yousheng Xie et al.
COMPUTERS AND GEOTECHNICS (2017)
Mixed mode fracture toughness testing of PMMA with different three-point bend type specimens
M. R. M. Aliha et al.
EUROPEAN JOURNAL OF MECHANICS A-SOLIDS (2016)
On the I-II mixed mode fracture of granite using four-point bend specimen
C. Wang et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2016)
Mixed mode brittle fracture analysis of high strength cement mortar using strain-based criteria
M. M. Mirsayar et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2016)
T-stress for a centrally cracked Brazilian disk under confining pressure
Wen Hua et al.
ENGINEERING FRACTURE MECHANICS (2015)
A review of T-stress and its effects in fracture mechanics
M. Gupta et al.
ENGINEERING FRACTURE MECHANICS (2015)
The influence of cyclic wetting and drying on the fracture toughness of sandstone
Wen Hua et al.
INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2015)
Experimental study on the fracture toughness of rust stone under mixed mode loading condition
W. Hua et al.
MATERIALS RESEARCH INNOVATIONS (2015)
Mode I Fracture Analysis of Polymethylmetacrylate Using Modified Energy-Based Models
M. R. Ayatollahi et al.
PHYSICAL MESOMECHANICS (2015)
A generalized strain energy density criterion for mixed mode fracture analysis in brittle and quasi-brittle materials
M. R. Ayatollahi et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2015)
Effect of Confining Pressure on Stress Intensity Factors for Cracked Brazilian Disk
Wen Hua et al.
INTERNATIONAL JOURNAL OF APPLIED MECHANICS (2015)
Mode I Fracture Analysis of Polymethylmetacrylate Using Modified Energy-Based Models
M. R. Ayatollahi et al.
PHYSICAL MESOMECHANICS (2015)
Mixed mode fracture analysis using extended maximum tangential strain criterion
M. M. Mirsayar
MATERIALS & DESIGN (2015)
Maximum tangential strain energy density criterion for general mixed mode I/II/III brittle fracture
M. R. Ayatollahi et al.
INTERNATIONAL JOURNAL OF DAMAGE MECHANICS (2015)
Experimental analysis of mixed mode crack propagation in brittle rocks: The effect of non-singular terms
J. Akbardoost et al.
ENGINEERING FRACTURE MECHANICS (2014)
Size-dependent fracture behavior of Guiting limestone under mixed mode loading
J. Akbardoost et al.
INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2014)
Mixed-Mode Elastic-Plastic Fractures: Improved R-Criterion
Li Ren et al.
JOURNAL OF ENGINEERING MECHANICS (2014)
ISRM-Suggested Method for Determining the Mode I Static Fracture Toughness Using Semi-Circular Bend Specimen
M. D. Kuruppu et al.
ROCK MECHANICS AND ROCK ENGINEERING (2014)
Application of Cracked Triangular Specimen Subjected to Three-Point Bending for Investigating Fracture Behavior of Rock Materials
M. R. M. Aliha et al.
ROCK MECHANICS AND ROCK ENGINEERING (2013)
Analysis of fracture initiation angle in some cracked ceramics using the generalized maximum tangential stress criterion
M. R. M. Aliha et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2012)
Typical Upper Bound-Lower Bound Mixed Mode Fracture Resistance Envelopes for Rock Material
M. R. M. Aliha et al.
ROCK MECHANICS AND ROCK ENGINEERING (2012)
Mode I fracture initiation in limestone by strain energy density criterion
M. R. Ayatollahi et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2012)
Geometry and size effects on fracture trajectory in a limestone rock under mixed mode loading
M. R. M. Aliha et al.
ENGINEERING FRACTURE MECHANICS (2010)
Mixed mode fracture analysis of polycrystalline graphite - A modified MTS criterion
M. R. Ayatollahi et al.
CARBON (2008)
On the use of Brazilian disc specimen for calculating mixed mode I-II fracture toughness of rock materials
M. R. Ayatollahi et al.
ENGINEERING FRACTURE MECHANICS (2008)
Fracture toughness study for a brittle rock subjected to mixed mode I/II loading
M. R. Ayatollahi et al.
INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2007)
Wide range data for crack tip parameters in two disc-type specimens under mixed mode loading
M. R. Ayatollahi et al.
COMPUTATIONAL MATERIALS SCIENCE (2007)
Mixed mode brittle fracture in PMMA - An experimental study using SCB specimens
MR Ayatollahi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2006)
Stress intensity factors for central cracked circular disk subjected to compression
SM Dong et al.
ENGINEERING FRACTURE MECHANICS (2004)
A finite-volume-energy based approach to predict the static and fatigue behavior of components with sharp V-shaped notches
P Lazzarin et al.
INTERNATIONAL JOURNAL OF FRACTURE (2001)
The role of T-stress in brittle fracture for linear elastic materials under mixed-mode loading
DJ Smith et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2001)