CNTs monitoring sensors for resin infusion optimization

Article Chemistry, Multidisciplinary

Highly Oriented Direct-Spun Carbon Nanotube Textiles Aligned by In Situ Radio-Frequency Fields

Liron Issman et al.

Summary: Carbon nanotube bundles were aligned using an altered direct spinning method and an AC electric field, resulting in enhanced electrical and tensile properties in the resulting textiles.

ACS NANO (2022)

添加到收藏夹

Article Materials Science, Composites

Resin infusion process monitoring using graphene coated glass fabric sensors and infusible thermoplastic and thermoset matrices

Tayyab Khan et al.

Summary: An online process monitoring system based on rGO coated glass fabric sensors was developed to monitor different stages of the resin infusion process. The performance of the sensors was found to be affected by the coating quality, dimensions, and spatial position within the laminate, as well as the type of resin system used.

POLYMER COMPOSITES (2022)

添加到收藏夹

Article Chemistry, Physical

Improved alignment and stress transfer in CNT fibre fabrics studied by in situ X-ray and Raman during wet-drawing

Anastasiia Mikhalchan et al.

Summary: Translating the mechanical properties of nanocarbons to structural components requires highly aligned networks with uniform internal stress transfer. This study demonstrates that wet-drawn fiber fabrics have improved tensile strength and modulus, increased alignment, and more cooperative stress transfer.

CARBON (2022)

添加到收藏夹

Article Nanoscience & Nanotechnology

Identification of Collapsed Carbon Nanotubes in High-Strength Fibers Spun from Compositionally Polydisperse Aerogels

Maria Vila et al.

Summary: This study demonstrates that carbon nanotubes with a sufficiently large diameter and a few layers can self-collapse into flat ribbons at atmospheric pressure, forming bundles that maximize packing and enhance interaction. Through cross-sectional transmission electron microscopy of focused ion beam-milled samples, collapsed CNTs can be uniquely identified in macroscopic fibers, providing insight into their properties and growth mechanisms. The use of selenium as a growth promotor can result in a maximum fraction of collapsed CNTs of 70%, with an average of 0.25 layers/nm.

ACS APPLIED NANO MATERIALS (2021)

添加到收藏夹

Article Materials Science, Composites

Monitoring of resin flow front and degree of cure in vacuum-assisted resin infusion process using multifunctional piezoelectric sensor network

Xiao Liu et al.

Summary: This study successfully monitored the flow front and curing degree of resin in the VARI process by using Lamb waves and electromechanical impedance based on a multifunctional piezoelectric sensor network.

POLYMER COMPOSITES (2021)

添加到收藏夹

Review Chemistry, Physical

Multifunctional epoxy nanocomposites reinforced by two-dimensional materials: A review

Ming Dong et al.

Summary: Epoxy resins are thermosetting polymers widely used in various applications, but their brittle and flammable nature limits their high-performance applications. Reinforcing epoxy resins with two-dimensional materials such as graphene and hexagonal boron nitride can provide multifunctional properties and enhance their performance.

CARBON (2021)

添加到收藏夹

Article Engineering, Electrical & Electronic

3D-printed resistive carbon-fiber-reinforced sensors for monitoring the resin frontal flow during composite manufacturing

Jose Sanchez del Rio et al.

Summary: This study explores novel resin frontal flow monitoring electrically resistive sensors made of reinforced continuous carbon fibers and manufactured by composite additive manufacturing. By optimizing the thickness of the sensors and the distance between conductive carbon filaments, the proper monitoring of resin flow can be achieved.

SENSORS AND ACTUATORS A-PHYSICAL (2021)

添加到收藏夹

Review Chemistry, Multidisciplinary

A Meta-Analysis of Conductive and Strong Carbon Nanotube Materials

John S. Bulmer et al.

Summary: A study evaluated the relationships between various characteristics of carbon nanotube materials, finding that doped, aligned few-wall CNTs are the most superior type and have advantages in terms of conductivity and strength. Furthermore, there is an intrinsic limit to the conductivity that requires doping to reach copper-level conductivity.

ADVANCED MATERIALS (2021)

添加到收藏夹

Article Chemistry, Physical

Simultaneous improvements in conversion and properties of molecularly controlled CNT fibres

Anastasiia Mikhalchan et al.

Summary: This study conducted a parametric study of the CNT fibre spinning process and found that conducting the reaction at high temperature using toluene as a carbon source, and adjusting the promotor to carbon ratio can simultaneously improve conversion and properties.

CARBON (2021)

添加到收藏夹

Article Engineering, Multidisciplinary

Using ultra-thin interlaminar carbon nanotube sheets to enhance the mechanical and electrical properties of carbon fiber reinforced polymer composites

Pratik Koirala et al.

Summary: This study demonstrates a significant improvement in the flexural strength, interlaminar shear strength, mode I fracture toughness, and electrical conductivity of CFRPs by incorporating ultra-thin CNT sheets between the plies. The interlaminar CNT sheets also enhance resistance to delamination and crack propagation in these composites.

COMPOSITES PART B-ENGINEERING (2021)

添加到收藏夹

Article Instruments & Instrumentation

Influence of polymer matrix on the sensing capabilities of carbon nanotube polymeric thermistors

A. Balam et al.

SMART MATERIALS AND STRUCTURES (2020)

添加到收藏夹

Article Chemistry, Physical

Electrical characterization of carbon-based fibers and their application for sensing relaxation-induced piezoresistivity in polymer composites

A. Can-Ortiz et al.

CARBON (2019)

添加到收藏夹

Article Engineering, Multidisciplinary

Carbon nanomaterials enabled fiber sensors: A structure-oriented strategy for highly sensitive and versatile in situ monitoring of composite curing process

Sida Luo et al.

COMPOSITES PART B-ENGINEERING (2019)

添加到收藏夹

Article Chemistry, Physical

Molecular characterization of macroscopic aerogels of single-walled carbon nanotubes

Belen Aleman et al.

CARBON (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

A highly sensitive and stress-direction-recognizing asterisk-shaped carbon nanotube strain sensor

Giheon Choi et al.

JOURNAL OF MATERIALS CHEMISTRY C (2019)

添加到收藏夹

Article Materials Science, Composites

Modelling the electrical resistance change in a multidirectional laminate with a delamination

Francesco Panozzo et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Piezoresistive response of carbon nanotube yarns under tension: Parametric effects and phenomenology

Jude C. Anike et al.

NEW CARBON MATERIALS (2018)

添加到收藏夹

Article Materials Science, Composites

Stochastic modeling of through the thickness permeability variation in a fabric and its effect on void formation during Vacuum Assisted Resin Transfer Molding

Minyoung Yun et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2017)

添加到收藏夹

Article Materials Science, Composites

Graphene coated piezo-resistive fabrics for liquid composite molding process monitoring

Muhammad A. Ali et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

A Composite Fabrication Sensor Based on Electrochemical Doping of Carbon Nanotube Yarns

Juan C. Fernandez-Toribio et al.

ADVANCED FUNCTIONAL MATERIALS (2016)

添加到收藏夹

Article Engineering, Manufacturing

In situ process monitoring of hierarchical micro-/nano-composites using percolated carbon nanotube networks

Joel Renaud Ngouanom Gnidakouong et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)

添加到收藏夹

Article Chemistry, Analytical

RTM Production Monitoring of the A380 Hinge Arm Droop Nose Mechanism: A Multi-Sensor Approach

Gabriele Chiesura et al.

SENSORS (2016)

添加到收藏夹

Article Multidisciplinary Sciences

Multi-Functional Carbon Fibre Composites using Carbon Nanotubes as an Alternative to Polymer Sizing

T. R. Pozegic et al.

SCIENTIFIC REPORTS (2016)

添加到收藏夹

Article Materials Science, Composites

Thermal, rheological and electrical analysis of MWCNTs/epoxy matrices

Mathieu Fogel et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2015)

添加到收藏夹

Review Materials Science, Multidisciplinary

Recent development in 2D materials beyond graphene

Ankur Gupta et al.

PROGRESS IN MATERIALS SCIENCE (2015)

添加到收藏夹

Article Instruments & Instrumentation

Aligned carbon nanotube sheet piezoresistive strain sensors

Ang Li et al.

SMART MATERIALS AND STRUCTURES (2015)

添加到收藏夹

Article Nanoscience & Nanotechnology

Graphite Nanoplatelet Enabled Embeddable Fiber Sensor for in Situ Curing Monitoring and Structural Health Monitoring of Polymeric Composites

Sida Luo et al.

ACS APPLIED MATERIALS & INTERFACES (2014)

添加到收藏夹

Article Chemistry, Multidisciplinary

Piezoresistive Effect in Carbon Nanotube Fibers

Agnieszka Lekawa-Raus et al.

ACS NANO (2014)

添加到收藏夹

Article Materials Science, Composites

Properties Analysis of Novel Composites for Space Robots

Xin Ning et al.

POLYMER COMPOSITES (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

A Single Glass Fiber with Ultrathin Layer of Carbon Nanotube Networks Beneficial to In-Situ Monitoring of Polymer Properties in Composite Interphases

Jie Zhang et al.

SOFT MATERIALS (2014)

添加到收藏夹

Article Chemistry, Multidisciplinary

SWCNT/Graphite Nanoplatelet Hybrid Thin Films for Self-Temperature- Compensated, Highly Sensitive, and Extensible Piezoresistive Sensors

Sida Luo et al.

ADVANCED MATERIALS (2013)

添加到收藏夹

Article Materials Science, Composites

The role of irreversible and reversible phenomena in the piezoresistive behavior of graphene epoxy nanocomposites applied to structural health monitoring

Leonel M. Chiacchiarelli et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2013)

添加到收藏夹

Article Chemistry, Physical

The hierarchical structure and properties of multifunctional carbon nanotube fibre composites

Juan J. Vilatela et al.

CARBON (2012)

添加到收藏夹

Article Materials Science, Characterization & Testing

Liquid Resin Infusion process monitoring with superimposed Fibre Bragg Grating sensor

Emmanuel Marin et al.

POLYMER TESTING (2012)

添加到收藏夹

Proceedings Paper Transportation

New Lightweight Structures for Advanced Automotive Vehicles - Safe and Modular

Gundolf Kopp et al.

TRANSPORT RESEARCH ARENA 2012 (2012)

添加到收藏夹

Article Chemistry, Multidisciplinary

A Model for the Strength of Yarn-like Carbon Nanotube Fibers

Juan J. Vilatela et al.

ACS NANO (2011)

添加到收藏夹

Article Engineering, Manufacturing

Life cycle monitoring of large-scale CFRP VARTM structure by fiber-optic-based distributed sensing

Shu Minakuchi et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2011)

添加到收藏夹

Article Chemistry, Multidisciplinary

Yarn-Like Carbon Nanotube Fibers

Juan J. Vilatela et al.

ADVANCED MATERIALS (2010)

添加到收藏夹

Article Engineering, Manufacturing

Fiber optic sensors for monitoring flow in vacuum enhanced resin infusion technology (VERITy) process

Nitesh Gupta et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2009)

添加到收藏夹

Article Engineering, Manufacturing

A grid of dielectric sensors to monitor mold filling and resin cure in resin transfer molding

Bekir Yenilmez et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2009)

添加到收藏夹

Article Materials Science, Composites

Variation of part thickness and compaction pressure in vacuum infusion process

Bekir Yenilmez et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2009)

添加到收藏夹

Article Materials Science, Characterization & Testing

Application of ultrasonics for the process control of Resin Transfer Moulding (RTM)

E Schmachtenberg et al.

POLYMER TESTING (2005)

添加到收藏夹

Article Materials Science, Composites

Flow monitoring in Liquid Composite Molding based on Linear Direct Current sensing technique

T Luthy et al.

POLYMER COMPOSITES (2003)

添加到收藏夹

Article Chemistry, Physical

Structure and electronic properties of carbon nanotubes

TW Odom et al.

JOURNAL OF PHYSICAL CHEMISTRY B (2000)

添加到收藏夹

CNTs monitoring sensors for resin infusion optimization

相关参考文献

导出引文

分享论文