4.7 Article

Single-Step PEDOT Deposition by oCVD for ITO-Free Deep Blue OLEDs

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Anesthesiology

Device for remote and realtime monitoring of neonatal vital signs in neonatal intensive care unit using internet of things: proof-of-concept study

Hundessa Daba Nemomssa et al.

Summary: In this study, a new approach for remote and real-time monitoring of neonatal vital signs using the internet of things (IoT) was proposed. The developed device showed acceptable measurement accuracy and has the potential to improve healthcare service for neonates.

JOURNAL OF CLINICAL MONITORING AND COMPUTING (2023)

Article Chemistry, Multidisciplinary

Coverage Performance of PEDOT:PSS Against Particles on a Substrate for OLEDs

Yu Kurosawa et al.

Summary: This study reveals the coverage properties of a solution-processed organic layer on size-controlled dust particles, and suggests that larger-sized particles have a lower probability of causing electrical defects.

ADVANCED MATERIALS INTERFACES (2023)

Article Materials Science, Multidisciplinary

Stable Flexible Transparent Electrodes for Localized Heating of Lab-on-a-Chip Devices

Dorina T. Papanastasiou et al.

Summary: This paper introduces a transparent heater based on silver nanowire networks, protected with a transparent zinc oxide film, for temperature control in biological experiments under transparent microscopic observation. The experimental results demonstrate that the nanocomposites allow rapid and reproducible heating under low applied voltage, and achieve selective heating in different zones of microchannels or adjacent microchannels at different temperatures.

ADVANCED MATERIALS TECHNOLOGIES (2023)

Article Engineering, Environmental

Modification of PEDOT:PSS towards high-efficiency OLED electrode via synergistic effect of carboxy and phenol groups from biomass derivatives

Huimin Xu et al.

Summary: This research enhanced the conductivity of PEDOT:PSS with two biomass-derived modifiers to 2022 S/cm and 2270 S/cm, successfully fabricating high-efficiency ITO-free OLED devices. By using PA/GtA-modified electrodes, a remarkable improvement in device performance was observed, with a 50-300% increase in efficiency for electronic display application at a brightness of 100 cd/m².

CHEMICAL ENGINEERING JOURNAL (2022)

Article Chemistry, Analytical

Internet of Things Concept in the Context of the COVID-19 Pandemic: A Multi-Sensor Application Design

Alexandru Lavric et al.

Summary: In this paper, a LoRaWAN-based integrated system for COVID-19 patient management is presented. The system allows remote symptom and health monitoring without external interaction with the patient. The IoT wearable device can monitor health parameters and location. The system was tested by monitoring two quarantined individuals for a 14-day period, and successfully identified a SARS-CoV2 virus infection. The proposed solution is highly scalable and can be implemented by local authorities to increase monitoring capabilities and save lives.

SENSORS (2022)

Article Chemistry, Multidisciplinary

Hybrid Silicon-Polymer Photodetector Engineered Using Oxidative Chemical Vapor Deposition for High-Performance and Bias-Switchable Multi-Functionality

Hyeonghun Kim et al.

Summary: Using oxidative chemical vapor deposition, a highly conformal and conductive organic transport layer is formed on black silicon for enhanced light-detection capability. By engineering the pore dimension, a mode-tunable Si photodetector is created.

ADVANCED FUNCTIONAL MATERIALS (2022)

Article Materials Science, Multidisciplinary

High performance encapsulation of transparent conductive polymers by spatial atomic layer deposition

Amelie Schultheiss et al.

Summary: This study demonstrates the use of spatial atomic layer deposition (SALD) to deposit ultrathin layers of ZnO, TiO2, and Al2O3 on PEDOT-based transparent conductive materials. The bilayer TiO2/Al2O3 and TiO2/ZnO coatings preserve the optoelectronic properties of the PEDOT films.

SYNTHETIC METALS (2022)

Article Chemistry, Applied

High-performance supercapacitors based on free-standing SiC@PEDOT nanowires with robust cycling stability

Wenna Liu et al.

Summary: In this study, electrodes with robust cycling capacity for supercapacitors were explored by coating conductive PEDOT around free-standing SiC nanowires, achieving high specific capacitance and excellent cycling stability.

JOURNAL OF ENERGY CHEMISTRY (2022)

Review Chemistry, Multidisciplinary

Challenges and Opportunities of Chemiresistors Based on Microelectromechanical Systems for Chemical Olfaction

Mengya Guo et al.

Summary: This review focuses on recent developments and challenges of MEMS-based micro-and nanoscale gas sensors, as well as future trends in this field. It also covers the background, seminal efforts, current applications, challenges, and opportunities for next-generation systems.

ACS NANO (2022)

Review Chemistry, Multidisciplinary

A brief review of nanoparticles-doped PEDOT:PSS nanocomposite for OLED and OPV

Guang Liang Ong et al.

Summary: This article summarizes the strategies proposed and demonstrated in recent years to enhance the efficiency of organic light-emitting diodes (OLEDs) and organic photovoltaics (OPVs). The use of nanoparticles doped into polymers to enhance hole injection and light absorption has shown promising results.

NANOTECHNOLOGY REVIEWS (2022)

Article Chemistry, Multidisciplinary

Optimizing the Optoelectronic Properties of Face-On Oriented Poly(3,4-Ethylenedioxythiophene) via Water-Assisted Oxidative Chemical Vapor Deposition

Meysam Heydari Gharahcheshmeh et al.

Summary: By growing face-on oriented semicrystalline PEDOT thin films using water-assisted oxidative chemical vapor deposition (oCVD), a significant enhancement in electrical conductivity has been achieved, reaching a record high of 7520 S cm(-1). Systematically controlling the π-π stacking distance led to an approximately 1140% improvement in electrical conductivity. This single-step, dry process allows for conformal coverage and direct growth on mechanically flexible, rough, and structured surfaces.

ADVANCED FUNCTIONAL MATERIALS (2021)

Review Chemistry, Multidisciplinary

A Brief History of OLEDs-Emitter Development and Industry Milestones

Gloria Hong et al.

Summary: Organic light-emitting diodes (OLEDs) have undergone significant development over the past 30 years, with advancements in emitter materials leading to three generations of OLED devices. Research is now focused on the fourth generation of OLEDs, with academia and industry achieving milestones in the development of green, orange-red, and blue OLED emitters.

ADVANCED MATERIALS (2021)

Article Chemistry, Physical

Nanopatterned Area-Selective Vapor Deposition of PEDOT on SiO2 vs Si-H: Improved Selectivity Using Chemical Vapor Deposition vs Molecular Layer Deposition

Jung-Sik Kim et al.

Summary: This study presents a simple, rapid, and effective method for achieving inherent ASD of poly(3,4-ethylenedioxythiophene) (PEDOT) on SiO2 vs hydrogen-terminated silicon (Si-H) substrates via molecular layer deposition (MLD) and chemical vapor deposition (CVD). The results demonstrate that CVD offers faster deposition rates and higher selectivity compared to MLD, making it a promising method for area-selective deposition applications in nanoscale materials fabrication.

CHEMISTRY OF MATERIALS (2021)

Article Nanoscience & Nanotechnology

Oxidative Chemical Vapor Deposition of Conducting Polymer Films on Nanostructured Surfaces for Piezoresistive Sensor Applications

Fabian Muralter et al.

Summary: In this study, a novel fully polymeric piezoresistive sensing setup was prepared and tested. By adjusting parameters such as substrate deposition temperature and film thickness, PEDOT thin films with high electrical conductivity and piezoresistive properties were achieved, resulting in samples with a gauge factor as high as 11.4.

ADVANCED ELECTRONIC MATERIALS (2021)

Article Chemistry, Physical

Phase Separation to Improve the Conductivity and Work Function of the PEDOT:PSS Solution for Silicon Hybrid Solar Cells

Qi Geng et al.

Summary: By modifying the PEDOT:PSS solution through heat treatment, the electrical conductivity and work function of the PEDOT:PSS film were improved, leading to enhanced performance of PEDOT:PSS/Si hybrid solar cells.

JOURNAL OF PHYSICAL CHEMISTRY C (2021)

Article Multidisciplinary Sciences

Organic light-emitting devices based on conducting polymer treated with benzoic acid

Hwa Seung Kang et al.

Summary: This study reports on the enhanced conductivity of benzoic-acid-treated PEDOT:PSS electrode for OLEDs, which significantly reduces operating voltage and increases brightness of the system. Additionally, the treatment method also improves the mechanical stability of OLEDs after numerous bending cycles.

SCIENTIFIC REPORTS (2021)

Article Multidisciplinary Sciences

Emergence and control of photonic band structure in stacked OLED microcavities

David Allemeier et al.

Summary: The authors demonstrate tuning of the photonic band gap in vertically-stacked OLED microcavities through intelligent device design, resulting in an electrically-driven metal-dielectric photonic crystal emitter. Interaction with adjacent cavities causes states of individual microcavities to split into bands of hybridized photonic energy states.

NATURE COMMUNICATIONS (2021)

Article Materials Science, Coatings & Films

Oxidative molecular layer deposition of PEDOT using volatile antimony(V) chloride oxidant

Amanda A. Volk et al.

Summary: The study introduces a facile and high-performing layer-by-layer oxidative molecular layer deposition (oMLD) scheme using a volatile liquid oxidant to deposit PEDOT thin films. It describes the effects of reactor parameters on PEDOT film characteristics and lays the necessary foundation for future studies on understanding the nucleation and growth of the layer-by-layer oMLD PEDOT.

JOURNAL OF VACUUM SCIENCE & TECHNOLOGY A (2021)

Article Materials Science, Multidisciplinary

Modification effect of hole injection layer on efficiency performance of wet-processed blue organic light emitting diodes

Cheng-Chieh Lo et al.

Summary: The study found that modifying the PEDOT:PSS hole injection layer significantly improves the performance of solution-processed OLEDs, with devices utilizing acetone-modified HIL showing the best performance.

ORGANIC ELECTRONICS (2021)

Article Chemistry, Physical

Liquid antimony pentachloride as oxidant for robust oxidative chemical vapor deposition of poly(3,4-ethylenedioxythiophene) films

Milad Mirabedin et al.

Summary: By adjusting the SbCl5/EDOT ratio and substrate temperature, the electrical conductivity of PEDOT films can be increased, while decreasing the total pressure improves film uniformity and electrical conductivity.

APPLIED SURFACE SCIENCE (2021)

Article Multidisciplinary Sciences

Graded bulk-heterojunction enables 17% binary organic solar cells via nonhalogenated open air coating

Ying Zhang et al.

Summary: The study demonstrates an effective graded bulk-heterojunction (G-BHJ) strategy using nonhalogenated solvent sequential deposition for nonfullerene acceptor (NFA) organic solar cells, achieving outstanding power conversion efficiency (PCE) of 17.48%. Advanced techniques such as depth-profiling X-ray photoelectron spectroscopy (DP-XPS) and angle-dependent grazing incidence X-ray diffraction (GI-XRD) enable visualization of morphology and crystallinity gradient distributions, leading to high PCEs of thick OSCs. The use of nonhalogenated solvent in G-BHJ OSC via open-air blade coating achieves a record 16.77% PCE by suppressing unfavorable phase separation in bulk-heterojunction. Overall, the G-BHJ strategy shows great promise for highly efficient, eco-friendly, and scalable organic solar cells.

NATURE COMMUNICATIONS (2021)

Article Chemistry, Multidisciplinary

New Roll-to-Roll Processable PEDOT-Based Polymer with Colorless Bleached State for Flexible Electrochromic Devices

Sven Macher et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Article Chemistry, Physical

Factors controlling conductivity of PEDOT deposited using oxidative chemical vapor deposition

Grant Drewelow et al.

APPLIED SURFACE SCIENCE (2020)

Review Materials Science, Multidisciplinary

Progress in understanding structure and transport properties of PEDOT-based materials: A critical review

Magatte N. Gueye et al.

PROGRESS IN MATERIALS SCIENCE (2020)

Article Materials Science, Multidisciplinary

Effects of interfacial modification for vapor phase polymerized PEDOT on glass substrate

Boxiao Li et al.

SYNTHETIC METALS (2020)

Article Multidisciplinary Sciences

Ancillary ligand increases the efficiency of heteroleptic Ir-based triplet emitters in OLED devices

Seung-yeol Baek et al.

NATURE COMMUNICATIONS (2020)

Article Chemistry, Multidisciplinary

Influence of PEDOT:PSS Coating Thickness on the Performance of Stimulation Electrodes

Gerwin Dijk et al.

ADVANCED MATERIALS INTERFACES (2020)

Article Materials Science, Multidisciplinary

An out of the box vision over oxidative chemical vapor deposition of PEDOT involving sublimed iron trichloride

Milad Mirabedin et al.

SYNTHETIC METALS (2020)

Article Materials Science, Multidisciplinary

Self-discharge characteristics of vapor deposited polymer electrodes in an all-textile supercapacitor

Wesley Viola et al.

SYNTHETIC METALS (2020)

Article Multidisciplinary Sciences

Toward three-dimensional hybrid inorganic/organic optoelectronics based on GaN/oCVD-PEDOT structures

Linus Krieg et al.

NATURE COMMUNICATIONS (2020)

Review Materials Science, Multidisciplinary

Texture and nanostructural engineering of conjugated conducting and semiconducting polymers

M. Heydari Gharahcheshmeh et al.

MATERIALS TODAY ADVANCES (2020)

Review Chemistry, Multidisciplinary

Recent advances in organic light-emitting diodes: toward smart lighting and displays

Shi-Jie Zou et al.

MATERIALS CHEMISTRY FRONTIERS (2020)

Article Chemistry, Physical

Why Is Pristine PEDOT Oxidized to 33%? A Density Functional Theory Study of Oxidative Polymerization Mechanism

Donghyun Kim et al.

JOURNAL OF PHYSICAL CHEMISTRY B (2019)

Article Materials Science, Multidisciplinary

An efficient PEDOT- coated textile for wearable thermoelectric generators and strain sensors

Yanhua Jia et al.

JOURNAL OF MATERIALS CHEMISTRY C (2019)

Article Materials Science, Multidisciplinary

Electroactive and Conformal Coatings of Oxidative Chemical Vapor Deposition Polymers for Oxygen Electroreduction

Shayan Kaviani et al.

ACS APPLIED POLYMER MATERIALS (2019)

Article Materials Science, Multidisciplinary

Metallic conductivity beyond the Mott minimum in PEDOT: Sulphate at low temperatures

Dominik Farka et al.

SYNTHETIC METALS (2018)

Review Engineering, Electrical & Electronic

A Review of Flexible OLEDs Toward Highly Durable Unusual Displays

Sung-Min Lee et al.

IEEE TRANSACTIONS ON ELECTRON DEVICES (2017)

Article Polymer Science

Room Temperature Sensing Achieved by GaAs Nanowires and oCVD Polymer Coating

Xiaoxue Wang et al.

MACROMOLECULAR RAPID COMMUNICATIONS (2017)

Review Chemistry, Multidisciplinary

Applications of Transparent Conducting Oxides in Organic Light Emitting Devices

Meng Yan et al.

JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY (2015)

Article Polymer Science

Synthesis of high performance, conductive PEDOT-coated polyester yarns by OCVD technique

Tariq Bashir et al.

POLYMERS FOR ADVANCED TECHNOLOGIES (2012)

Review Chemistry, Physical

Scientific importance, properties and growing applications of poly( 3,4-ethylenedioxythiophene)

S Kirchmeyer et al.

JOURNAL OF MATERIALS CHEMISTRY (2005)