☆ 4.6 Article

Fabrication and properties of polyethylene terephthalate (PET) aerogel composites from plastic bottle waste

MATERIALS TODAY COMMUNICATIONS (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Chemical

Eco-friendly synthesis of durable aerogel composites from chitosan and pineapple leaf-based cellulose for Cr(VI) removal

Luon Nguyen Tan et al.

Summary: In this study, bio-based aerogels were successfully synthesized from pineapple leaves and chitosan for the removal of chromium (VI) contaminants in water. The synthesized aerogels exhibited lightweight, high porosity, durability, and acid resistance. The chitosan content and pH of the medium were found to significantly affect the chromium (VI) adsorption. The cellulose/chitosan aerogel showed a high retention rate of chromium absorption capacity after multiple absorbing cycles.

SEPARATION AND PURIFICATION TECHNOLOGY (2023)

添加到收藏夹

Article Chemistry, Analytical

On the Behavior of Honeycomb, Grid and Triangular PLA Structures under Symmetric and Asymmetric Bending

Vasile Cojocaru et al.

Summary: Additive manufacturing technologies allow the production of lightweight components with various patterns and densities of infills. Infill geometries must satisfy strength and stiffness requirements while reducing mass and material consumption. This study analyzes the behavior of three commonly used infill geometries (honeycomb, grid, and triangles) in symmetric and asymmetric bending. The results show similar behaviors for honeycomb and triangular structures along the Y and Z principal axes of inertia, and highlight the larger displacements of the grid structure compared to the other two structures in relation to the consumed volume of material.

MICROMACHINES (2023)

添加到收藏夹

Article Engineering, Chemical

Non-Conventional Reinforced EPS and Its Numerical Examination

Katalin Voith et al.

Summary: In recent decades, both EPS (expanded polystyrene) and XPS (extruded polystyrene) have been widely used as thermal insulation materials. The circular economy has become crucial in our current economic situation, emphasizing the need to maximize the lifespan of products and minimize waste generation. This research aims to produce reinforced EPS material with comparable physical and thermal properties to XPS, which is more expensive to produce. By utilizing plastic straws and cutlery, as well as renewable agricultural materials like wheat straws, the focus is on mapping possible raw materials and minimizing waste through reuse.

PROCESSES (2023)

添加到收藏夹

Article Biochemistry & Molecular Biology

Advanced Fabrication and Multi-Properties of Aluminum-Based Aerogels from Aluminum Waste for Thermal Insulation and Oil Absorption Applications

Xue Yang Goh et al.

Summary: A novel and environmentally friendly approach to aluminum-based aerogels using aluminum waste is proposed. The aluminum-based aerogels produced have low density, high porosity, low thermal conductivity, high-temperature resistance, and good oil absorption properties. This study shows that aluminum-based aerogels have potential in thermal insulation and oil absorption applications.

MOLECULES (2023)

添加到收藏夹

Review Construction & Building Technology

Slab-on-grade thermal bridges: A thermal behavior and solution review

Ali El Saied et al.

Summary: The building industry plays a significant role in global energy consumption and greenhouse gas emissions. This paper focuses on reducing heat losses in buildings, particularly through floor foundations. It provides a comprehensive evaluation of thermal bridges (TBs), with an emphasis on slab-on-grade TBs. Different types of TBs are defined and evaluation standards are presented. Common approaches for evaluating TBs, such as the U-value method, equivalent method approach, and three-dimensional dynamic method, are discussed. The paper also explores the impact of soil thermal conductivity on TBs and presents exterior insulation solutions to reduce heat losses. Case studies demonstrate the effectiveness of trapezoidal double insulation in minimizing TBs. The paper concludes by suggesting directions for further research.

ENERGY AND BUILDINGS (2022)

添加到收藏夹

Review Environmental Sciences

Pyrolysis of polypropylene plastic waste into carbonaceous char: Priority of plastic waste management amidst COVID-19 pandemic

M. M. Harussani et al.

Summary: The COVID-19 pandemic has resulted in a significant increase in PP plastic waste, prompting the need for alternative methods such as pyrolysis to convert this waste into renewable energy. This paper summarizes the process of pyrolysis for PP plastic waste, highlighting the key parameters affecting product yields and optimization strategies for solid char production.

SCIENCE OF THE TOTAL ENVIRONMENT (2022)

添加到收藏夹

Article Engineering, Chemical

Composite aerogels of TEMPO-oxidized pineapple leaf pulp and chitosan for dyes removal

Nga H. N. Do et al.

Summary: Recycling agricultural and aquacultural by-products into high-value engineering aerogels is a sustainable solution that effectively addresses issues such as solid waste accumulation, water pollution, and cleaner production of renewable materials.

SEPARATION AND PURIFICATION TECHNOLOGY (2022)

添加到收藏夹

Review Materials Science, Paper & Wood

Recent developments in biomass derived cellulose aerogel materials for thermal insulation application: a review

Sourav Sen et al.

Summary: This article introduces cellulose aerogel as an attractive thermal insulation material with excellent physical and chemical properties, and discusses its application prospects in energy-saving insulation in the building industry.

CELLULOSE (2022)

添加到收藏夹

Article Polymer Science

A new strategy to chemically transform waste PET plastic into aerogel with high fire resistance and mechanical strength

Bingying Gao et al.

Summary: This study presents a new method for synthesizing high-performance PET aerogel from waste PET beverage bottles, which exhibits excellent fire resistance and compressive strength. The improvement in thermal stability and mechanical strength of the aerogel is achieved through the construction of poly aluminum phosphate networks and the formation of polys-associated hydrogen bonds.

POLYMER (2022)

添加到收藏夹

Article Engineering, Manufacturing

Highly thermal conductivity of PVA-based nanocomposites by constructing MWCNT-BNNS conductive paths

Jianwei Zhou et al.

Summary: This study proposes a novel strategy to construct thermally conductive networks using boron nitride nanosheets-multiwalled carbon nanotubes/poly(vinyl alcohol) nanocomposites. The resulting nanocomposites exhibit excellent in-plane thermal conductivity and heat dissipation capacity, providing inspiration for the preparation of composites with high thermal conductivity.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2022)

添加到收藏夹

Review Chemistry, Multidisciplinary

Thermally Insulating Nanocellulose-Based Materials

Varvara Apostolopoulou-Kalkavoura et al.

Summary: Thermally insulating materials based on renewable nanomaterials like nanocellulose have the potential to reduce energy consumption and environmental impact in the building sector. Recent advances in superinsulating cellulose nanomaterial-based aerogels and foams have shown significantly better heat transport properties than traditional materials, leading to increased research activity in this area.

ADVANCED MATERIALS (2021)

添加到收藏夹

Article Engineering, Environmental

Sustainable design of flexible 3D aerogel from waste PET bottle for wastewater treatment to energy harvesting device

Sunanda Roy et al.

Summary: This study successfully utilized scrap PET bottles to fabricate a highly efficient nanofiber-based aerogel that showed outstanding performance in removing heavy metal polluted water and serving as an alternative green energy source.

CHEMICAL ENGINEERING JOURNAL (2021)

添加到收藏夹

Article Chemistry, Applied

Green fabrication of flexible aerogels from polypropylene fibers for heat insulation and oil/water separation

Nga H. N. Do et al.

Summary: Hydrophobic polymer-based aerogels were successfully developed from polypropylene fibers for heat insulation and oil spill treatments. These aerogels exhibit low density, high porosity, flexibility, good heat insulation, water repellency, and high oil absorption capacity, attributed to their porous hollow structure. The oil absorption of polypropylene aerogels in this study is significantly better than previous research and comparable to commercial absorbents and other polymer aerogels.

JOURNAL OF POROUS MATERIALS (2021)

添加到收藏夹

Article Environmental Sciences

Advanced fabrication and multi-properties of aluminium hydroxide aerogels from aluminium wastes

Thenappa S. Sp et al.

Summary: By converting aluminium metal waste into aluminium hydroxide aerogels, a new environmentally friendly material with low density, high porosity, and high thermal performance has been developed for high-value engineering applications.

JOURNAL OF MATERIAL CYCLES AND WASTE MANAGEMENT (2021)

添加到收藏夹

Article Engineering, Environmental

A novel aerogel from thermal power plant waste for thermal and acoustic insulation applications

Hai M. Duong et al.

Summary: In this study, fly ash is converted into an advanced aerogel with properties such as low density, high porosity, excellent thermal and acoustic performance, and high compressive Young's modulus. The newly developed fly ash aerogel is considered a potential material for applications in thermal insulation, sound absorption, and lightweight composites.

WASTE MANAGEMENT (2021)

添加到收藏夹

Review Construction & Building Technology

Aerogel based thermal insulating cementitious composites: A review

Suman Kumar Adhikary et al.

Summary: The article provides a comprehensive review of aerogel-incorporated cementitious materials in terms of production, fresh rheology, mechanical properties, microstructure, durability, thermal insulation, and economic perspectives. Emphasis is placed on the hygrothermal behavior of aerogel-based cement composites, highlighting the promising future of aerogel as lightweight thermal insulating composites in the construction industry.

ENERGY AND BUILDINGS (2021)

添加到收藏夹

Article Construction & Building Technology

Experimental and numerical investigation of PCM capsules as insulation materials inserted into a hollow brick wall

Hayder M. Abbas et al.

Summary: This study verifies the effectiveness of using PCM capsules as insulation material in hollow brick walls. The numerical model matches well with experimental results, showing that treated walls can effectively reduce indoor temperature, increase time lag, and decrease temperature fluctuation.

ENERGY AND BUILDINGS (2021)

添加到收藏夹

Article Green & Sustainable Science & Technology

Green recycling of fly ash into heat and sound insulation composite aerogels reinforced by recycled polyethylene terephthalate fibers

Nga H. N. Do et al.

Summary: By converting fly ash into a lightweight composite aerogel reinforced with recycled polyethylene terephthalate fiber, a feasible zero-waste method has been developed to address environmental pollution, resulting in aerogels with extremely low density, high porosity, low thermal conductivity, flexibility, and noise reduction. This study offers a safe, environmentally friendly, and cost-effective solution for recycling fly ash into high-value engineering materials.

JOURNAL OF CLEANER PRODUCTION (2021)

添加到收藏夹

Article Engineering, Environmental

Recycling of Pineapple Leaf and Cotton Waste Fibers into Heat-insulating and Flexible Cellulose Aerogel Composites

Nga H. N. Do et al.

Summary: In this study, pineapple leaf fibers and cotton waste fibers were combined for the first time to produce thermal insulating and flexible cellulose-based aerogel composites. The composites exhibited outstanding heat insulation and mechanical strength, showing great potential for practical insulation applications.

JOURNAL OF POLYMERS AND THE ENVIRONMENT (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Heat and sound insulation applications of pineapple aerogels from pineapple waste

Nga H. N. Do et al.

MATERIALS CHEMISTRY AND PHYSICS (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Methyltrimethoxysilane-coated recycled polyethylene terephthalate aerogels for oil spill cleaning applications

Duyen Khac Le et al.

MATERIALS CHEMISTRY AND PHYSICS (2020)

添加到收藏夹

Article Chemistry, Physical

The Thermal Conductivity of 3D Printed Plastic Insulation Materials-The Effect of Optimizing the Regular Structure of Closures

Beata Grabowska et al.

MATERIALS (2020)

添加到收藏夹

Article Engineering, Environmental

Recycling of magnesium waste into magnesium hydroxide aerogels

Bryan J. Y. Yam et al.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2020)

添加到收藏夹

Article Engineering, Environmental

Functionalized pineapple aerogels for ethylene gas adsorption and nickel (II) ion removal applications

Zi En Lim et al.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2020)

添加到收藏夹

Article Engineering, Environmental

Advanced aerogels from waste tire fibers for oil spill-cleaning applications

Quoc Ba Thai et al.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Fiber Reinforced Polyimide Aerogel Composites with High Mechanical Strength for High Temperature Insulation

Zhaoxian Zhu et al.

MACROMOLECULAR MATERIALS AND ENGINEERING (2019)

添加到收藏夹

Article Chemistry, Applied

Optimization of dye adsorption capacity and mechanical strength of chitosan aerogels through crosslinking strategy and graphene oxide addition

M. Salzano de Luna et al.

CARBOHYDRATE POLYMERS (2019)

添加到收藏夹

Article Polymer Science

Anisotropic Cellulose Nanofibers/Polyvinyl Alcohol/Graphene Aerogels Fabricated by Directional Freeze-drying as Effective Oil Adsorbents

Lijie Zhou et al.

POLYMERS (2019)

添加到收藏夹

Article Chemistry, Physical

Advanced fabrication and multi-properties of rubber aerogels from car tire waste

Quoc Ba Thai et al.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2019)

添加到收藏夹

Review Engineering, Multidisciplinary

On controlling aerogel microstructure by freeze casting

Wang Liao et al.

COMPOSITES PART B-ENGINEERING (2019)

添加到收藏夹

Article Polymer Science

Fabrication and Properties of Hybrid Coffee-Cellulose Aerogels from Spent Coffee Grounds

Xiwen Zhang et al.

POLYMERS (2019)

添加到收藏夹

Article Engineering, Environmental

Applications of functionalized polyethylene terephthalate aerogels from plastic bottle waste

Duyen Khac Le et al.

WASTE MANAGEMENT (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Elastic methyltrimethoxysilane based silica aerogels reinforced with polyvinylmethyldimethoxysilane

Lukai Wang et al.

RSC ADVANCES (2019)

添加到收藏夹

Review Green & Sustainable Science & Technology

Porous materials in building energy technologies-A review of the applications, modelling and experiments

Saman Rashidi et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2018)

添加到收藏夹

Article Chemistry, Physical

Advanced fabrication and properties of hybrid polyethylene tetraphalate fiber-silica aerogels from plastic bottle waste

Steven Salomo et al.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

A novel approach for fabricating highly tunable and fluffy bioinspired 3D poly(vinyl alcohol) (PVA) fiber scaffolds

Sunanda Roy et al.

NANOSCALE (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

A Facile Approach to Tune the Electrical and Thermal Properties of Graphene Aerogels by Including Bulk MoS2

Feng Gong et al.

NANOMATERIALS (2017)

添加到收藏夹

Article Physics, Fluids & Plasmas

Thermal Jacket Design Using Cellulose Aerogels for Heat Insulation Application of Water Bottles

Hai M. Duong et al.

FLUIDS (2017)

添加到收藏夹

Article Pharmacology & Pharmacy

pH responsive cross-linked polymeric matrices based on natural polymers: effect of process variables on swelling characterization and drug delivery properties

Fahad Naeem et al.

BIOIMPACTS (2017)

添加到收藏夹

Article Polymer Science

Thermal conductivity of plasma modified polyethylene terephthalate and polyamide-6 layers

G. Kalacska et al.

EXPRESS POLYMER LETTERS (2016)

添加到收藏夹

Article Polymer Science

From Fragile to Resilient Insulation: Synthesis and Characterization of Aramid-Honeycomb Reinforced Silica Aerogel Composite Materials

Marina Schwan et al.

GELS (2016)

添加到收藏夹

Article Chemistry, Multidisciplinary

Synthesis, characterisation and thermal degradation behaviour of some coordination polymers by using TG-DTG and DTA techniques

Ratiram Gomaji Chaudhary et al.

JOURNAL OF SAUDI CHEMICAL SOCIETY (2015)

添加到收藏夹

Article Nanoscience & Nanotechnology

Thermally insulating and fire-retardant lightweight anisotropic foams based on nanocellulose and graphene oxide

Bernd Wicklein et al.

NATURE NANOTECHNOLOGY (2015)

添加到收藏夹

Article Thermodynamics

Effects of heat treatment on the thermal properties of highly nanoporous graphene aerogels using the infrared microscopy technique

Zeng Fan et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2014)

添加到收藏夹

Article Chemistry, Applied

Mechanical properties of monolithic silica aerogels made from polyethoxydisiloxanes

Joanna C. H. Wong et al.

MICROPOROUS AND MESOPOROUS MATERIALS (2014)

添加到收藏夹

Article Chemistry, Physical

Morphology effects on electrical and thermal properties of binderless graphene aerogels

Zeng Fan et al.

CHEMICAL PHYSICS LETTERS (2013)

添加到收藏夹

Article Engineering, Mechanical

Effects of heat treatment on adhesion strength of thermal barrier coating systems

Abdullah C. Karaoglanli et al.

ENGINEERING FAILURE ANALYSIS (2013)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of cell-wall angle on the in-plane crushing behaviour of hexagonal honeycombs

Lingling Hu et al.

MATERIALS & DESIGN (2013)

添加到收藏夹

Article Engineering, Mechanical

Collapse modes in aluminium honeycomb sandwich panels under bending and impact loading

V. Crupi et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2012)

添加到收藏夹

Article Polymer Science

Thermal Decomposition Behavior of Poly (Vinyl Alcohol) with Different Hydroxyl Content

Haigang Yang et al.

JOURNAL OF MACROMOLECULAR SCIENCE PART B-PHYSICS (2012)

添加到收藏夹

Article Nanoscience & Nanotechnology

Experimental investigation of in-plane and out-of-plane crushing of aluminum honeycomb

M. K. Khan et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)

添加到收藏夹

Article Nanoscience & Nanotechnology

Tailoring Mechanical Properties of Aerogels for Aerospace Applications

Jason P. Randall et al.

ACS APPLIED MATERIALS & INTERFACES (2011)

添加到收藏夹

Article Materials Science, Ceramics

Enhancing mechanical properties of silica aerogels

Kimberly A. D. Obrey et al.

JOURNAL OF NON-CRYSTALLINE SOLIDS (2011)

添加到收藏夹

Article Chemistry, Physical

Synthesis and characterization by FTIR spectroscopy of silica aerogels prepared using several Si(OR)4 and RSi(OR′)3 precursors

Rami Al-Oweini et al.

JOURNAL OF MOLECULAR STRUCTURE (2009)

添加到收藏夹

Review Engineering, Industrial

Silica aerogel; synthesis, properties and characterization

A. Soleimani Dorcheh et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2008)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.