☆ 4.7 Article

Advanced finite element analyses to compute the J-integral for delaminated composite plates

APPLIED MATHEMATICAL MODELLING (2024)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Mechanics

Fracture mechanical finite element analysis for delaminated composite plates applying the first-order shear deformation plate theory

Bence Hauck et al.

Summary: In this paper, the authors focus on the finite element discretization of delaminated polymer composite plates for fracture mechanical analysis. They use the first-order shear deformation plate theory and two equivalent single layers. The analysis includes linear elastic orthotropic material behavior and the determination of the energy release rate along the crack front through the J-integral. The authors discuss the differences derived from the continuity conditions and boundary conditions between the semi-analytical and finite element approaches.

COMPOSITE STRUCTURES (2023)

添加到收藏夹

Article Engineering, Mechanical

An efficient and versatile use of the VCCT for composites delamination growth under fatigue loadings in 3D numerical analysis: the Sequential Static Fatigue algorithm

L. M. Martulli et al.

Summary: In this study, a new VCCT-based 3D fatigue propagation algorithm (SSF) is introduced to accurately simulate the fatigue propagation of delamination defects. Compared to the benchmark algorithm, the SSF significantly reduces computational time by three orders of magnitude and achieves better accuracy. This work establishes a more efficient modelling technique for fatigue delamination propagation.

INTERNATIONAL JOURNAL OF FATIGUE (2023)

添加到收藏夹

Article Mechanics

Investigation of real delamination detection in composite structure using air-coupled ultrasonic testing

Mohammad Bahonar et al.

Summary: This research utilized air-coupled ultrasonic testing to detect composite defects, improving delamination detection accuracy through proper test setup and the use of a support vector machine classifier.

COMPOSITE STRUCTURES (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Modified equivalent single layer theory for dynamic analysis of rotating composite shafts

Safa Ben Arab et al.

Summary: This paper presents a dynamic study of the rotating composite shaft vibratory behavior and the effects of different mechanical coupling. The close agreement in the achieved results proves the efficiency of the developed finite element based on Modified ESLT. Furthermore, obtained results revealed that different mechanical coupling, fiber orientations and stacking sequences have an important influence on the rotating composite shaft dynamic behavior.

MECHANICS OF ADVANCED MATERIALS AND STRUCTURES (2021)

添加到收藏夹

Article Mechanics

Delamination detection in composite plates using random forests

Dao Kun Lim et al.

Summary: This paper presents an alternative strategy for simultaneous predictions of severity and location parameters of delamination in composite plates using a combination of random forests (RF) and natural frequency-shift damage assessment methods. The study includes the establishment of a robust finite element (FE) procedure, validation of the FE procedure, and development of four RF models with different architectures. Results show that the proposed RF-based method is capable of accurately predicting five parameters quantifying the location and severity of delamination in composite plates, with a coefficient of correlation as high as 0.996 and up to 90% accuracy for classifying the delaminated interface.

COMPOSITE STRUCTURES (2021)

添加到收藏夹

Article Mechanics

Application of the virtual crack closure technique (VCCT) using tetrahedral finite elements to calculate the stress intensity factor

Yan-Ping Liu et al.

Summary: This paper presents an approach for calculating the stress intensity factor (SIF) using tetrahedral finite elements and the virtual crack closure technique (VCCT), allowing for automatic and easy meshing of cracked structures and showing reasonable agreement with analytical solutions.

ENGINEERING FRACTURE MECHANICS (2021)

添加到收藏夹

Article Engineering, Civil

Application of differential quadrature method to delaminated first-order shear deformable composite plates

Andras Szekrenyes

Summary: This work applied the differential quadrature method to composite plates with delamination, using two and four equivalent single layers to provide numerical results. The convergence of deflection was compared to analytical and finite element models, showing deviations between upper and lower bounds. It was found that the method of two equivalent single layers exhibits an oscillatory phenomenon in mode-II components. Additionally, the importance of proper grid structure to avoid waviness in mode-III energy release rate was highlighted when using four equivalent single layers.

THIN-WALLED STRUCTURES (2021)

添加到收藏夹

Article Engineering, Multidisciplinary

Bioinspired functionally graded gyroid sandwich panel subjected to impulsive loadings

Chenxi Peng et al.

COMPOSITES PART B-ENGINEERING (2020)

添加到收藏夹

Article Engineering, Multidisciplinary

Analysis of laminated piezoelectric composite plates using an inverse hyperbolic coupled plate theory

Yadwinder S. Joshan et al.

APPLIED MATHEMATICAL MODELLING (2020)

添加到收藏夹

Review Chemistry, Multidisciplinary

Waste-Printed Circuit Board Recycling: Focusing on Preparing Polymer Composites and Geopolymers

Qin Wang et al.

ACS OMEGA (2020)

添加到收藏夹

Article Engineering, Mechanical

Analytical solution of some delamination scenarios in thick structural sandwich plates

Andras Szekrenyes

JOURNAL OF SANDWICH STRUCTURES & MATERIALS (2019)

添加到收藏夹

Article Mechanics

Equivalent single-layer models in deformation analysis of laminated multilayered plates

Ireneusz Kreja et al.

ACTA MECHANICA (2019)

添加到收藏夹

Article Mechanics

Fracture and mode mixity analysis of shear deformable composite beams

Balazs Kiss et al.

ARCHIVE OF APPLIED MECHANICS (2019)

添加到收藏夹

Article Mechanics

A novel quasi-3D trigonometric plate theory for free vibration analysis of advanced composite plates

Moussa Abualnour et al.

COMPOSITE STRUCTURES (2018)

添加到收藏夹

Article Acoustics

Nonlinear Finite Element Analysis of Transient Behavior of Delaminated Composite Plate

Chetan Kumar Hirwani et al.

JOURNAL OF VIBRATION AND ACOUSTICS-TRANSACTIONS OF THE ASME (2018)

添加到收藏夹

Article Engineering, Multidisciplinary

A nonlinear finite thickness cohesive interface element for modeling delamination in fibre-reinforced composite laminates

J. Reinoso et al.

COMPOSITES PART B-ENGINEERING (2017)

添加到收藏夹

Article Engineering, Multidisciplinary

Semi-layerwise analysis of laminated plates with nonsingular delamination-The theorem of autocontinuity

Andras Szekrenyes

APPLIED MATHEMATICAL MODELLING (2016)

添加到收藏夹

Article Engineering, Multidisciplinary

Static analysis of functionally graded plates using new non-polynomial displacement fields via Carrera Unified Formulation

J. L. Mantari et al.

COMPOSITES PART B-ENGINEERING (2016)

添加到收藏夹

Article Mechanics

Bending solution of third-order orthotropic Reddy plates with asymmetric interfacial crack

Andras Szekrenyes

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2014)

添加到收藏夹

Article Materials Science, Composites

Analysis of classical and first-order shear deformable cracked orthotropic plates

Andras Szekrenyes

JOURNAL OF COMPOSITE MATERIALS (2014)

添加到收藏夹

Article Mechanics

Interlaminar stresses and energy release rates in delaminated orthotropic composite plates

Andras Szekrenyes

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2012)

添加到收藏夹

Article Engineering, Multidisciplinary

A first-order shear deformation finite element model for elastostatic analysis of laminated composite plates and the equivalent functionally graded plates

S. S. Alieldin et al.

AIN SHAMS ENGINEERING JOURNAL (2011)

添加到收藏夹

Review Engineering, Aerospace

Structural health monitoring techniques for aircraft composite structures

K. Diamanti et al.

PROGRESS IN AEROSPACE SCIENCES (2010)

添加到收藏夹

Article Engineering, Multidisciplinary

Optimisation of steel-composite connections for structural marine applications

S. W. Boyd et al.

COMPOSITES PART B-ENGINEERING (2008)

添加到收藏夹

Article Mechanics

A new simple third-order shear deformation theory of plates

Guanyu Shi

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2007)

添加到收藏夹

Article Mechanics

Methods for calculating stress intensity factors in anisotropic materials: Part II - Arbitrary geometry

Leslie Banks-Sills et al.

ENGINEERING FRACTURE MECHANICS (2007)

添加到收藏夹

Article Materials Science, Multidisciplinary

Failure analysis of multiple delaminated composite plates due to bending and impact

PK Parhi et al.

BULLETIN OF MATERIALS SCIENCE (2001)

添加到收藏夹

Article Mathematics, Applied

Multivariate Hermite interpolation by algebraic polynomials: A survey

RA Lorentz

JOURNAL OF COMPUTATIONAL AND APPLIED MATHEMATICS (2000)

添加到收藏夹

Article Engineering, Civil

Canonical exact solutions for Levy-plates on two-parameter foundation using Green's functions

KY Lam et al.

ENGINEERING STRUCTURES (2000)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.