4.7 Article

Thermal conductivity analysis of natural fiber-derived porous thermal insulation materials

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Energy & Fuels

Green and sustainable kapok fibre as novel core materials for vacuum insulations panels

Qianqian Sun et al.

Summary: A new strategy was developed to prepare vacuum insulation panel (VIP) core materials using light, ecofriendly, and renewable kapok fibres. The kapok fibre VIPs showed excellent thermal insulation performance, with a thermal conductivity as low as 6.12 mW/(m center dot K) at an internal pressure of 0.05 Pa. These VIPs also demonstrated outstanding thermal performance stability, with only a 9-13% increase in thermal conductivity when the ambient temperature increased from 15 to 55 degrees C. The low density of the VIPs, below 105 kg/m(3), was attributed to the special thin-walled and large cavity structure of kapok fibres. Therefore, kapok fibres are a potential alternative to fume silica for sustainable, green, renewable, and eco-friendly VIPs.

APPLIED ENERGY (2023)

Article Energy & Fuels

Thermal Properties of Hemp Shives Used as Insulation Material in Construction Industry

Piotr Kosinski et al.

Summary: The article presents a study on the thermal insulation properties of raw hemp shives obtained from the Polish crop of industrial hemp. The focus of the study is on pore size distribution, thermal conductivity, and air permeability. The results show that the thermal conductivity coefficient increases with the increase in bulk density. The shives have a high porosity, with the majority of pores in the diameter range of 0.9-3 μm. The article also provides an example of using the tested material as thermal insulation for wooden frame walls and observes the clear influence of variables on temperature distribution through heat flow analysis.

ENERGIES (2022)

Article Agricultural Engineering

From Wood and Hemp Biomass Wastes to Sustainable Nanocellulose Foams

Sergejs Beluns et al.

Summary: Research indicates that hemp nanocellulose foams exhibit higher performance characteristics compared to wood nanocellulose foams, including almost twice the fiber length, 1.5 times higher cellulose content, and a more homogeneous mesh-like structure. Additionally, the thermal performance of the obtained nanocellulose foams falls within the range of 34-44 mW/m.K, making them comparable to commonly used insulation materials.

INDUSTRIAL CROPS AND PRODUCTS (2021)

Article Physics, Applied

Study on pore size distribution and thermal conductivity of aramid nanofiber aerogels based on fractal theory

Xiao Chen et al.

Summary: Fractal geometry theory was used to simulate the pore structure of ANFAs, and the equivalent resistance method was applied to calculate thermal conductivity. The calculated results closely matched experimental data, demonstrating the effectiveness and reliability of the prediction model.

JOURNAL OF APPLIED PHYSICS (2021)

Article Chemistry, Physical

Heat Transfer in Straw-Based Thermal Insulating Materials

Daniel Csanady et al.

Summary: An analytic-empirical model was developed to describe heat transfer process in raw straw bulks based on laboratory experiments, testing two different straw types and achieving good agreement between the model and measured thermal conductivities. Optimal bulk densities of two different straw types were found to be similar, with the model considering factors such as solid conduction, gas conduction, and radiation.

MATERIALS (2021)

Article Construction & Building Technology

A cylindrical self-consistent modelling of vegetal wools thermal conductivity

Clement Piegay et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Article Materials Science, Paper & Wood

Thermal Insulation Properties of Green Vacuum Insulation Panel Using Wood Fiber as Core Material

Baowen Wang et al.

BIORESOURCES (2019)

Article Materials Science, Textiles

Thermal Properties of Raw Hemp Fiber as a Loose-Fill Insulation Material

Piotr Kosinski et al.

JOURNAL OF NATURAL FIBERS (2018)

Article Physics, Applied

Thermal conductivity model for nanofiber networks

Xinpeng Zhao et al.

JOURNAL OF APPLIED PHYSICS (2018)

Review Green & Sustainable Science & Technology

The development history and prospects of biomass-based insulation materials for buildings

LiFang Liu et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2017)

Article Construction & Building Technology

The use of insulating materials based on natural fibers in combination with plant facades in building constructions

Azra Korjenic et al.

ENERGY AND BUILDINGS (2016)

Review Green & Sustainable Science & Technology

The effect of building envelope on the thermal comfort and energy saving for high-rise buildings in hot-humid climate

Seyedehzahra Mirrahimi et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2016)

Article Green & Sustainable Science & Technology

Life Cycle Impacts of Natural Fiber Composites for Automotive Applications: Effects of Renewable Energy Content and Lightweighting

Claire S. Boland et al.

JOURNAL OF INDUSTRIAL ECOLOGY (2016)

Article Engineering, Manufacturing

Investigation of thermal conductivity of natural fibres processed by different mechanical methods

Ruta Stapulioniene et al.

INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2016)

Article Thermodynamics

Advances of thermal conductivity models of nanoscale silica aerogel insulation material

Ya-Ling He et al.

APPLIED THERMAL ENGINEERING (2015)

Article Chemistry, Multidisciplinary

The Calculation of Thermal Conductivities by Three Dimensional Direct Simulation Monte Carlo Method

Xin-Peng Zhao et al.

JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY (2015)

Article Thermodynamics

Thermal Convection in Porous Media at High Rayleigh Numbers

Daniel J. Keene et al.

JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2015)

Proceedings Paper Engineering, Mechanical

Development and Research of Thermal Insulation Materials from Natural Fibres

Saulius Vaitkus et al.

ENGINEERING MATERIALS & TRIBOLOGY XXII (2014)

Article Thermodynamics

Experimental study of air natural convection on metallic foam-sintered plate

Zhiguo Qu et al.

INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW (2012)

Article Thermodynamics

Review on thermal transport in high porosity cellular metal foams with open cells

C. Y. Zhao

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2012)

Review Engineering, Industrial

Silica aerogel; synthesis, properties and characterization

A. Soleimani Dorcheh et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2008)

Article Biochemistry & Molecular Biology

Cellulose nanofibers prepared by TEMPO-mediated oxidation of native cellulose

Tsuguyuki Saito et al.

BIOMACROMOLECULES (2007)

Article Materials Science, Multidisciplinary

Synthesis and characterization of silica aerogels by a novel fast ambient pressure drying process

Fei Shi et al.

MATERIALS LETTERS (2006)

Article Thermodynamics

Natural convection in metal foams with open cells

CY Zhao et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2005)