☆ 4.7 Article

Experimental investigation on self-induced jet impingement boiling using R1336mzz(Z)

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2024)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Thermodynamics

Pool boiling heat transfer enhancement on the hybrid surfaces coupling capillary wick and minichannels

Yonghai Zhang et al.

Summary: By designing and processing enhanced hybrid surfaces and considering the coupled effects of capillary wick and minichannels, the pool boiling heat transfer performance of these surfaces was improved. The impact of the ring groove and capillary wick on the boiling heat transfer was analyzed, and high heat flux and heat transfer coefficient were achieved with the hybrid surfaces. A correlation for predicting the critical heat flux on these hybrid surfaces covered capillary wick was proposed.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2023)

添加到收藏夹

Article Thermodynamics

Saturated pool boiling heat transfer enhancement of R245fa based on the surface covered by sintered copper powder with and without nanostructure

Chao Dang et al.

Summary: This study experimentally investigated the pool boiling characteristics on enhanced surfaces with sintered copper powder coatings. Different enhanced surfaces, including sintered porous layers with copper powder particles and their nano-treated surfaces, were tested. The results showed that coating sintered copper powder porous layer effectively improved the boiling heat transfer performance, with the maximum heat transfer coefficient and CHF value enhancement reaching 151% and 160% of the plain copper surface, respectively. The enhanced surfaces triggered nucleation at lower wall superheats compared to the plain copper surface, and after nano-treatment, the heat transfer enhancement was further improved at medium and low heat flux.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2023)

添加到收藏夹

Article Physics, Applied

Microlayer evaporation governs heat transfer enhancement during pool boiling from microstructured surfaces

Manohar Bongarala et al.

Summary: Enhancement of boiling heat transfer can be achieved by introducing surface microstructures, yet the exact mechanism behind this enhancement is still not completely understood. This study establishes microlayer evaporation from the liquid layer underneath vapor bubbles as the key mechanism for the enhancement in boiling heat transfer coefficient on microstructured surfaces.

APPLIED PHYSICS LETTERS (2022)

添加到收藏夹

Article Thermodynamics

Enhanced pool boiling on micro-nano composited surfaces with nanostructures on micro-pin-fins

Bin Liu et al.

Summary: The distribution of nanostructures on micro-nano composited surfaces significantly affects the pool boiling heat transfer performance. Surfaces with nanostructures covering the top and bottom sides have the lowest wall superheat, while surfaces with nanostructures etched at the top corners or edges have higher heat transfer coefficients. Bubbles are mainly generated on the tops of micro-pin-fins, alleviating the blockage of capillary wicking channels in high heat flux regions. Moreover, the condensation effect of subcooled liquid on the bubbles generated at the tops of micro-pin-fins is stronger.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2022)

添加到收藏夹

Article Thermodynamics

Experimental investigation of pool boiling heat transfer on the radial micro-pillar surfaces

Yonghai Zhang et al.

Summary: An experimental study was conducted on pool boiling heat transfer with heterogeneous micro-pillar surfaces. It was found that these surfaces significantly improved the heat transfer performance with an earlier onset of nucleate boiling and improved heat transfer coefficient. The critical heat flux was dependent on the heat transfer area enhancement ratio at high subcooled temperature. Additionally, the overall heat transfer coefficient of micro-pillar surfaces first increased to a critical value, and then decreased with the increase of heat flux.

APPLIED THERMAL ENGINEERING (2022)

添加到收藏夹

Article Thermodynamics

Saturated pool boiling heat transfer of HFE-7100 on sintered copper powder and wire mesh microporous surfaces: A comparison study

Yawen Jiang et al.

Summary: This article discusses the impact of different surfaces on boiling heat transfer and improves the heat transfer performance by using two different wetting characteristics. The experimental results show that the biphilic surface exhibits good performance in pool boiling but is prone to falling off under long-term operating conditions.

APPLIED THERMAL ENGINEERING (2022)

添加到收藏夹

Article Thermodynamics

Enhanced pool boiling on composite microstructured surfaces with microcavities on micro-pin-fins

Bin Liu et al.

Summary: In this study, composite microstructured surfaces with different numbers of microcavities were prepared, and their effect on pool boiling performance in HFE-7100 was investigated. The results showed that the composite microstructured surfaces exhibited reduced wall superheats and increased heat transfer coefficients compared to a micro-pin-fined surface and a smooth surface. Among them, the surface with 16 microcavities showed the best boiling heat transfer performance in the nucleate boiling region.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2022)

添加到收藏夹

Article Engineering, Aerospace

Enhanced Boiling Heat Transfer Performance on Mini-pin-finned Copper Surfaces in FC-72

Hongqiang Chen et al.

Summary: This study designed and processed uniformly distributed mini-pin-fins on the copper surface and investigated their enhanced boiling heat transfer performance in a liquid medium. The experiment showed that the height, spacing, and width of the fins have significant effects on the heat transfer performance and efficiency.

MICROGRAVITY SCIENCE AND TECHNOLOGY (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Nanoparticle-Assisted Pool Boiling Heat Transfer on Micro-Pin-Fin Surfaces

Zhen Cao et al.

Summary: The study focused on enhancing saturated pool boiling of FC-72 by surface modifications, resulting in significant improvements in heat transfer coefficient and critical heat flux. Experimental results showed that the application of micro-pin fins and copper nanoparticles could further enhance heat transfer performance. High-speed bubble visualizations and model analysis revealed that small bubble departure diameters and high bubble departure frequencies were crucial for improving heat transfer coefficients.

LANGMUIR (2021)

添加到收藏夹

Article Thermodynamics

Influence of System Pressure on Pool Boiling Regimes on A Microstructured Surface Compared to A Smooth Surface

Matthias Zimmermann et al.

EXPERIMENTAL HEAT TRANSFER (2020)

添加到收藏夹

Article Thermodynamics

Investigation of the scatter in reported pool boiling CHF measurements including analysis of heat flux and measurement uncertainty evaluation methodology

Matic Moze et al.

APPLIED THERMAL ENGINEERING (2020)

添加到收藏夹

Article Thermodynamics

Pool boiling heat transfer on silicon chips with non-uniform micro-pillars

Lian Duan et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2020)

添加到收藏夹

Article Thermodynamics

Analysis of the enhancing mechanism in pool boiling heat transfer through wetting speed for rough aluminum surfaces with FC-72

Jun Kim et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2020)

添加到收藏夹

Article Thermodynamics

The pool boiling heat transfer and critical vapor column coalescence mechanism of block-divided microstructured surfaces

Zeyang Lei et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Wicking Enhanced Critical Heat Flux for Highly Wetting Fluids on Structured Surfaces

Md Mahamudur Rahman et al.

LANGMUIR (2020)

添加到收藏夹

Article Thermodynamics

Subcooled critical heat flux on laser-textured stainless-steel ribbon heaters in pool boiling of FC-72

Klemen Ferjancic et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2020)

添加到收藏夹

Article Thermodynamics

Effect of boiling-induced aging on pool boiling heat transfer performance of untreated and laser-textured copper surfaces

Matic Moze

APPLIED THERMAL ENGINEERING (2020)

添加到收藏夹

Article Thermodynamics

Pool boiling enhancement through a guidance structure mounted above heating surface

Luling Yuan et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2019)

添加到收藏夹

Review Thermodynamics

Review of pool boiling enhancement by surface modification

Gangtao Liang et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2019)

添加到收藏夹

Article Thermodynamics

Identification of nucleate boiling as the dominant heat transfer mechanism during confined two-phase jet impingement

Matthew D. Clark et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2019)

添加到收藏夹

Article Thermodynamics

Comparison of normal and distributed jet array impingement boiling of HFE-7000 on smooth and pin-fin surfaces

F. L. Cui et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2018)

添加到收藏夹

Article Physics, Applied

Pool boiling enhancement through bubble induced convective liquid flow in feeder microchannels

A. Jaikumar et al.

APPLIED PHYSICS LETTERS (2016)

添加到收藏夹

Article Thermodynamics

Effects of inclination angle and liquid subcooling on nucleate boiling on dimpled copper surfaces

Mohamed S. El-Genk et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2016)

添加到收藏夹

Article Thermodynamics

Ultra-high pool boiling performance and effect of channel width with selectively coated open microchannels

Arvind Jaikumar et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2016)

添加到收藏夹

Article Thermodynamics

Effect of particle size on surface-coating enhancement of pool boiling heat transfer

Suchismita Sarangi et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2015)

添加到收藏夹

Article Multidisciplinary Sciences

Increasing Boiling Heat Transfer using Low Conductivity Materials

Md Mahamudur Rahman et al.

SCIENTIFIC REPORTS (2015)

添加到收藏夹

Article Thermodynamics

Confined jet array impingement boiling of subcooled aqueous ethylene glycol solution

F. J. Hong et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2014)

添加到收藏夹

Article Mechanics

A flow pattern independent drift flux model based void fraction correlation for a wide range of gas-liquid two phase flow

Swanand M. Bhagwat et al.

INTERNATIONAL JOURNAL OF MULTIPHASE FLOW (2014)

添加到收藏夹

Article Thermodynamics

Saturation Nucleate Boiling and Correlations for PF-5060 Dielectric Liquid on Inclined Rough Copper Surfaces

Mohamed S. El-Genk et al.

JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2014)

添加到收藏夹

Article Thermodynamics

Critical heat flux of bi-porous sintered copper coatings in FC-72

Chan Byon et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2013)

添加到收藏夹

Article Thermodynamics

Boiling heat transfer on a dendritic and micro-porous surface in R134a and FC-72

Richard Furberg et al.

APPLIED THERMAL ENGINEERING (2011)

添加到收藏夹

Article Thermodynamics

A new mechanistic model for pool boiling CHF on horizontal surfaces

Cheng-Kang Guan et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2011)

添加到收藏夹

Article Thermodynamics

Effects of carbon nanotube arrays on nucleate pool boiling

Sebastine Ujereh et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2007)

添加到收藏夹

Article Thermodynamics

Pool boiling heat transfer on horizontal rectangular fin array in saturated FC-72

Chih Kuang Yu et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2007)

添加到收藏夹

Article Engineering, Electrical & Electronic

Hybrid micro-nano structured thermal interfaces for pool boiling heat transfer enhancement

S. Launay et al.

MICROELECTRONICS JOURNAL (2006)

添加到收藏夹

Article Engineering, Electrical & Electronic

Pool boiling heat transfer on artificial micro-cavity surfaces in dielectric fluid FC-72

Chih Kuang Yu et al.

JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2006)

添加到收藏夹

Article Thermodynamics

Effect of nozzle geometry on pressure drop and heat transfer in submerged jet arrays

A Royne et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2006)

添加到收藏夹

Article Thermodynamics

Pool boiling of saturated FC-72 on nano-porous surface

S Vemuri et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2005)

添加到收藏夹

Article Thermodynamics

Effect of pressure, subcooling, and dissolved gas on pool boiling heat transfer from microporous, square pin-finned surfaces in FC-72

KN Rainey et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2003)

添加到收藏夹

Article Thermodynamics

Boiling of saturated FC-72 on square pin fin arrays

G Guglielmini et al.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2002)

添加到收藏夹

Article Thermodynamics

Enhanced boiling of FC-72 on silicon chips with micro-pin-fins and submicron-scale roughness

H Honda et al.

JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2002)

添加到收藏夹

Article Thermodynamics

A theoretical model to predict pool boiling CHF incorporating effects of contact angle and orientation

SG Kandlikar

JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2001)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.