☆ 4.7 Article

Combined effects of inlet conditions and assembly accuracy on Nusselt and friction factors of plate heat exchangers

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2024)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Multidisciplinary

Mechanical stress analysis of various GPHE corrugated plates during the assembly and in working conditions

G. S. M. Martins et al.

Summary: The characteristics and materials of gasketed plate heat exchangers (GPHE) in a given industrial application are determined by thermal, hydrodynamics, structural, and environmental requirements. This study evaluated the mechanical behavior of GPHE plates during assembly and working conditions, finding that stress levels are crucial in determining the useful life of the heat exchanger. The stress levels increase with increasing static pressure and decreasing plate thickness in working conditions, and they are considerably higher in single condition.

INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING (2023)

添加到收藏夹

Review Energy & Fuels

Review of Developments in Plate Heat Exchanger Heat Transfer Enhancement for Single-Phase Applications in Process Industries

Olga Arsenyeva et al.

Summary: A plate heat exchanger (PHE) is a modern and efficient heat transfer equipment, capable of enhancing heat recuperation and energy efficiency. This paper reviews the construction and exploration developments of PHEs, as well as the methods of heat transfer intensification. The use of inclined corrugations on the surface of PHE plates is a common method to improve performance.

ENERGIES (2023)

添加到收藏夹

Article Thermodynamics

Plate heat exchangers: calculation of pressure drop for single phase convection in turbulent flow regime

Sergej Gusew et al.

Summary: Plate heat exchangers are crucial for technical applications, and it is important to accurately calculate pressure drop. This study introduces new geometrical parameters for calculating the pressure drop of the distribution zone, resulting in a three-component model that shows good agreement with experimental data and explains differences in data from other authors.

HEAT AND MASS TRANSFER (2022)

添加到收藏夹

Article Thermodynamics

Experimental Investigation into the Effect of Elastic Deformation of Plates on the Friction Resistance of Plate Heat Exchangers

A. S. Matyash et al.

Summary: Experimental tests were conducted on a large-scale bench to determine the coefficient of friction resistance. The tests involved collapsible plate heat exchangers with varying plate pack configurations. The results showed a significant difference in the friction drag coefficient for the same heat exchanger model at similar Reynolds numbers, which was attributed to the elastic deformation of the plates caused by pressure drop. By refining the algorithm for processing experimental data, the coefficients and exponents necessary for calculating friction resistance were determined, and the values of critical Reynolds numbers were refined as well. The relationship between elastic deformation and the size/type of corrugation on the chevron surface has not been established.

THERMAL ENGINEERING (2022)

添加到收藏夹

Article Thermodynamics

Flow maldistribution and heat transfer characteristics in plate and shell heat exchangers

L. Beckedorff et al.

Summary: This study presents an experimental and theoretical analysis of the flow and heat transfer characteristics of a plate and shell heat exchanger (PSHE). The results show that flow maldistribution increases the pressure drop and reduces the heat transfer performance of the heat exchanger. The overall performance of the shell side is inferior to the plate side, with higher maldistribution and lower Nusselt number. The study concludes that the thermo-hydraulic performance of the gasketed plate heat exchanger (PHE) is superior to the PSHE, but the PSHE is suitable for high pressure and high-temperature applications.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2022)

添加到收藏夹

Article Thermodynamics

Plate heat exchanger design for the utilisation of waste heat from exhaust gases of drying process

Olga Arsenyeva et al.

Summary: A novel model for commercially produced plate heat exchangers in waste heat recovery processes was developed and proven to be accurate in predicting heat transfer coefficients. The study showed significant energy savings in industrial applications using the developed mathematical model and obtained correlations.

ENERGY (2021)

添加到收藏夹

Review Green & Sustainable Science & Technology

A review of heat transfer enhancement techniques in plate heat exchangers

Ji Zhang et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2019)

添加到收藏夹

Article Engineering, Mechanical

An experimental study on single phase convection heat transfer and pressure drop in two brazed plate heat exchangers with different chevron shapes and hydraulic diameters

Man Bae Kim et al.

JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2017)

添加到收藏夹

Review Green & Sustainable Science & Technology

Corrugated plate heat exchanger review

Talal M. Abou Elmaaty et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2017)

添加到收藏夹

Proceedings Paper Energy & Fuels

Gasketed plate heat exchangers breathing effect

V. D. Lychakov et al.

INTERNATIONAL CONFERENCE PROBLEMS OF THERMAL PHYSICS AND POWER ENGINEERING (PTPPE-2017) (2017)

添加到收藏夹

Article Engineering, Mechanical

Heat transfer and pressure drop of a gasket-sealed plate heat exchanger depending on operating conditions across hot and cold sides

Joon Ahn et al.

JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2016)

添加到收藏夹

Article Thermodynamics

Friction and Colburn factor correlations and shape optimization of chevron-type plate heat exchangers

Jonghyeok Lee et al.

APPLIED THERMAL ENGINEERING (2015)

添加到收藏夹

Article Thermodynamics

Complex 3D-flow analysis and corrugation angle effect in plate heat exchangers

Kifah Sarraf et al.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2015)

添加到收藏夹

Article Thermodynamics

Generalised semi-empirical correlation for heat transfer in channels of plate heat exchanger

Olga P. Arsenyeva et al.

APPLIED THERMAL ENGINEERING (2014)

添加到收藏夹

Article Thermodynamics

Flow characteristics and thermal performance in chevron type plate heat exchangers

Jonghyeok Lee et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2014)

添加到收藏夹

Proceedings Paper Energy & Fuels

Numerical simulation of corrugated depth on the performance of plate heat exchanger

Yuhan Zhao et al.

ENERGY DEVELOPMENT, PTS 1-4 (2014)

添加到收藏夹

Article Engineering, Chemical

Heat transfer and friction factor in criss-cross flow channels of plate-and-frame heat exchangers

O. P. Arsenyeva et al.

THEORETICAL FOUNDATIONS OF CHEMICAL ENGINEERING (2012)

添加到收藏夹

Proceedings Paper Computer Science, Interdisciplinary Applications

The Simulation Research on the Performance of Chevron-type Corrugated Plate Heat Exchanger

Dingbiao Wang et al.

MANUFACTURING SCIENCE AND TECHNOLOGY, PTS 1-8 (2012)

添加到收藏夹

Article Thermodynamics

Experimental investigation of single phase convective heat transfer coefficient in a corrugated plate heat exchanger for multiple plate configurations

T. S. Khan et al.

APPLIED THERMAL ENGINEERING (2010)

添加到收藏夹

Article Thermodynamics

Experimental Study and Genetic-Algorithm-Based Correlation on Pressure Drop and Heat Transfer Performances of a Cross-Corrugated Primary Surface Heat Exchanger

Qiu-Wang Wang et al.

JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2009)

添加到收藏夹

Article Thermodynamics

Dimensional analysis for the heat transfer characteristics in the corrugated channels of plate heat exchangers

J. H. Lin et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2007)

添加到收藏夹

Article Thermodynamics

An experimental investigation of the performance of cross-corrugated plate heat exchangers

MA Hessami

JOURNAL OF ENHANCED HEAT TRANSFER (2003)

添加到收藏夹

Article Thermodynamics

Experimental study on heat transfer in wavy channels

YS Lee et al.

JOURNAL OF ENHANCED HEAT TRANSFER (2003)

添加到收藏夹

Article Thermodynamics

Gas/liquid flow in plate-and-frame heat exchangers - Part I: Pressure drop measurements

C Tribbe et al.

HEAT TRANSFER ENGINEERING (2001)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.