☆ 4.7 Article

Ultra-broadband gaps of a triple-gradient phononic acoustic black hole beam

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2024)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Mechanics

A novel periodic beam with multilayer acoustic black holes for deep sub-wavelength vibration attenuation

Cang He et al.

Summary: This paper presents a sandwich beam design that combines the features of Acoustic Black Hole (ABH) and local resonance mechanism for sub-wavelength vibration reduction. Parametric analysis shows that increasing ABH power and reducing truncation thickness can widen the frequency band gaps, while the mass of the viscoelastic layer benefits attenuation intensity. Inserting stiffeners to alleviate stress concentration has negligible impact on the transmission spectra.

ACTA MECHANICA (2023)

添加到收藏夹

Article Acoustics

Attenuation band splitting in a finite plate strip with two-dimensional acoustic black holes

Bing Han et al.

Summary: This paper reports an unusual splitting phenomenon in a finite plate strip with two-dimensional acoustic black holes (ABHs). The resonance peak that separates the wide attenuation band predicted by a bandgap (BG) splits it into two attenuation bands in the finite strip, challenging the common belief. The study clarifies the underlying mechanism and demonstrates that the splitting can be tuned by disrupting the structural details of the ABH strips.

JOURNAL OF SOUND AND VIBRATION (2023)

添加到收藏夹

Article Engineering, Mechanical

Evanescent waves in a metabeam attached with lossy acoustic black hole pillars

Jie Deng et al.

Summary: In this paper, a metabeam with periodically distributed integrated acoustic black holes (IABHs) is proposed. The thickness of the base beam remains unchanged, making it suitable for load-bearing applications. The ABH pillars act as dynamic vibration absorbers (DVAs), providing abundant modes with high damping performance and generating resonance and bandgaps to stop wave propagation.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2023)

添加到收藏夹

Article Mechanics

Flexural wave manipulation in perforated metamaterial plates with acoustic black holes interconnected by piezoelectric studs

Wenliang Gao et al.

Summary: This research presents a novel perforated metamaterial plate with acoustic black holes (ABHs) interconnected by piezoelectric studs for flexural wave manipulation. It derives the governing equations of the metamaterial plate using the differential quadrature element method and the first-order shear deformation plate theory. The proposed model is validated by comparing with finite element simulation results, and the wave propagation characteristics are obtained. The results show that the introduction of piezoelectric patches in the studs brings wider complete bandgaps (BGs) and stronger collimation effect at lower frequencies.

COMPOSITE STRUCTURES (2023)

添加到收藏夹

Article Engineering, Mechanical

The ABH-based lattice structure for load bearing and vibration suppression

Hui Sheng et al.

Summary: This paper proposes a novel 3D lightweight lattice structure based on the acoustic black hole to achieve high load-bearing capability and vibration suppression in the low-frequency domain. The structure demonstrates superior static stiffness and vibration bandgaps compared to typical lattice structures, indicating great application potential.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2023)

添加到收藏夹

Article Engineering, Mechanical

A two-dimensional wave and Rayleigh-Ritz method for complex dispersion in periodic arrays of circular damped acoustic black holes

Jie Deng et al.

Summary: In this paper, we address the complex dispersion of two-dimensional periodic arrays of circular acoustic black holes (ABHs) using the extended wave and Rayleigh-Ritz method (WRRM). By solving the eigenvalue problems with an iteration method, we obtain the complex dispersion surface and equi-frequency contours of the ABH arrays. The validity of the two-dimensional WRRM is confirmed by comparing with finite element simulations, and the method is applied to calculate the complex dispersion of infinite ABH strips and arrays.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2023)

添加到收藏夹

Article Engineering, Mechanical

Topological interface states in deep-subwavelength phononic beams

Seongmin Park et al.

Summary: We propose deep-subwavelength phononic beams that support topological interface states (TISs) at ultra-low frequencies. The beams are designed using unit cells with acoustic black hole (ABH) configurations to obtain the first band gap at low frequencies, where the unit cell size is much smaller than the wavelength of the wave. By modifying the ABH configuration and breaking the inversion symmetry of the unit cell, we control the topological phases of the phononic beams and connect two topologically distinct beams to produce the TIS in their low band gaps.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2023)

添加到收藏夹

Article Engineering, Civil

Wave attenuation of a laminated acoustic black hole array in a load-bearing beam structure

Cang He et al.

Summary: Acoustic Black Hole (ABH) is a wedged taper that can slow down bending wave speed in thin-walled structures. However, its application is limited by the weakened structural strength caused by digging holes. We propose a compound layout with acoustically soft materials to retain structural topology and enhance load-bearing capacity.

THIN-WALLED STRUCTURES (2023)

添加到收藏夹

Article Acoustics

Vibration isolation by a periodic beam with embedded acoustic black holes based on a hybrid dynamics method

Bowen Yao et al.

Summary: This work investigates the vibration isolation of a beam structure embedded with periodic embedded symmetric ABHs. The vibration transmission of a single unit is first studied using the Riccati transfer matrix method (RTMM), and then a hybrid dynamics method (HDM) is proposed to derive the vibration transmission solution of the beam with multiple ABHs. The proposed HDM provides an efficient tool for solving the vibration response of the beam with periodic embedded ABHs.

JOURNAL OF LOW FREQUENCY NOISE VIBRATION AND ACTIVE CONTROL (2023)

添加到收藏夹

Article Engineering, Aerospace

Theoretical and Experimental Studies on Pyroshock Attenuation via Periodic Rods

Wenliang Gao et al.

Summary: Pyrotechnic releasing devices are widely used in aerospace missions to separate subsystems from spacecraft. Periodic composite rods with phononic crystals are introduced for the first time to mitigate high-frequency transient pyroshock induced by pyrotechnic release devices. The wave propagation behaviors, dynamic responses, shock response spectrums, and pyroshock attenuation in periodic rods can be controlled and predicted quantitatively by designing the geometry of the rods.

AIAA JOURNAL (2022)

添加到收藏夹

Article Acoustics

Dynamics analysis and design of metamaterial beams with multiple half-sine waves

Meng-Xin He et al.

Summary: The study introduces a metamaterial beam with multiple corrugated parts for broad band gaps and explores its potential in vibration control. By utilizing the spectral element method and the cell mapping method, along with optimization design, it is possible to achieve vibration control in different frequency ranges while balancing low amplitude and high strength requirements.

APPLIED ACOUSTICS (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Ultra-low frequency broadband gap optimization of 1D periodic structure with dual power-law acoustic black holes

Hui Sheng et al.

Summary: The study investigates the ultra-low frequency broadband gap in a one-dimensional structure embedded with ABHs with power-law material properties, using the Transfer Matrix Method. The results show that the dual power-law ABH structure has excellent ultra-low frequency performance due to the reduction of dual power-law local stiffness. Optimization through parameter analysis and NSGA-II combined with TMM provides a trade-off between lower bandgaps and higher stiffness, leading to the design of periodic DP-ABHs with ultra-low broadband gaps meeting stiffness requirements.

JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES (2022)

添加到收藏夹

Article Engineering, Mechanical

Nonlocal acoustic black hole metastructures: Achieving broadband and low frequency passive vibration attenuation

Siddharth Nair et al.

Summary: This paper introduces the concept of nonlocal Acoustic Black Hole (ABH) metastructure and explores its vibration attenuation performance through numerical analysis. By introducing nonlocality, the dynamic operating range of the ABH absorbers is expanded, and the role of nonlocality on the dynamic response of the periodic metastructure is investigated.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2022)

添加到收藏夹

Article Engineering, Mechanical

Broadband vibration suppression of rainbow metamaterials with acoustic black hole

Wenliang Gao et al.

Summary: In this study, a rainbow metamaterial beam embedded with graded arrangement of Acoustic Black Holes (ABHs) is proposed to achieve broadband vibration attenuation. The attenuation bandgaps can be tuned by changing the geometry parameters of ABHs. Rainbow metamaterial beams exhibit a broader attenuation band and better attenuation effect compared to periodic ones.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2022)

添加到收藏夹

Article Acoustics

Rainbow zigzag metamaterial beams as broadband vibration isolators for beam-like structures

Jun Zhang et al.

Summary: Rainbow metamaterials, consisting of a gradient zigzag metamaterial beam design with flat band structures, can be used as broadband vibration isolators for beam-like structures.

JOURNAL OF SOUND AND VIBRATION (2022)

添加到收藏夹

Article Physics, Multidisciplinary

Realisation of acoustic black holes using multi-material additive manufacturing

Beth Austin et al.

Summary: Acoustic black holes (ABHs) are widely accepted as an effective passive vibration control technique, with various configurations investigated for different applications. However, traditional manufacturing techniques may restrict the potential shapes and configurations of ABHs. Therefore, this study explores the use of multi-material additive manufacturing as a potential solution to avoid material waste and achieve complex geometries.

FRONTIERS IN PHYSICS (2022)

添加到收藏夹

Article Mechanics

Research on vibration absorption and isolation characteristics of periodic acoustic black hole beam resonators and their enhancement

Yue Bao et al.

International Journal of Applied Mechanics (2022)

添加到收藏夹

Article Engineering, Manufacturing

Lightweight meta-lattice sandwich panels for remarkable vibration mitigation: Analytical prediction, numerical analysis and experimental validations

Hao Li et al.

Summary: An innovative ultralight meta-lattice sandwich panel structure is designed and manufactured using 3D printing technology, for efficient and broadband low-frequency vibration attenuation with high load-bearing capacity. This structure, without heavy local-resonators or soft damping support, improves yield strength and offers a new avenue for integrating structural strength and multifunction performance.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2022)

添加到收藏夹

Article Acoustics

Interface design of low-frequency band gap characteristics in stepped hybrid phononic crystals

J. C. Guo et al.

Summary: A novel stepped hybrid frame-pillar phononic crystal structure is designed to reduce vibrations in wide low-frequency ranges, with a focus on the interface effect on band gap characteristics. The study shows that adjusting interface properties and geometrical parameters can lead to wider frequency ranges for band gap tuning.

APPLIED ACOUSTICS (2021)

添加到收藏夹

Article Acoustics

Experimental investigation of underwater locally multi-resonant metamaterials under high hydrostatic pressure for low frequency sound absorption

Yinghong Gu et al.

Summary: This research introduced an underwater acoustic metamaterial capable of absorbing broadband low-frequency underwater sound under high hydrostatic pressure. Through local resonance modes, strong coupling, and multiple scattering effects among harmonic oscillators, the absorption band was significantly widened, demonstrating the effectiveness and superior sound absorption performance of the proposed acoustic metamaterial under high hydrostatic pressure conditions.

APPLIED ACOUSTICS (2021)

添加到收藏夹

Article Mechanics

Low-frequency vibration insulation performance of the pyramidal lattice sandwich metamaterial beam

Yao Zhang et al.

Summary: A novel pyramidal truss core metamaterial beam with embedded internal mass-spring resonators is designed for superior low-frequency vibration insulation performance. The location and width of the bandgap can be selected by tailoring the properties of the resonators. The pyramidal truss core metamaterial beam with multi-frequency resonators achieves much broader bandgaps than that with only a single array of resonators.

COMPOSITE STRUCTURES (2021)

添加到收藏夹

Article Acoustics

Ultra-wide low-frequency band gap in a tapered phononic beam

Seongmin Park et al.

Summary: Researchers proposed a tapered phononic beam with a unit cell consisting of two identical uniform parts and a thickness- and width-varying part. By controlling the geometrical parameters, the phononic beam achieved an ultra-broad and ultra-low frequency band gap from 3.6 Hz to 237.9 Hz.

JOURNAL OF SOUND AND VIBRATION (2021)

添加到收藏夹

Article Acoustics

Elastic wave modulation of double-leaf ABH beam embedded mass oscillator

Nansha Gao et al.

Summary: In this study, a double-leaf acoustic black hole beam embedded mass oscillator was proposed for modulation effects on elastic waves. The vibration transmission spectrum analysis allows for adjustments of attenuation amplitude and bandwidth of flexural and longitudinal waves, leading to effective vibration isolation.

APPLIED ACOUSTICS (2021)

添加到收藏夹

Article Engineering, Mechanical

Closed-form bandgap design formulas for beam-type metastructures

Yong Xiao et al.

Summary: This work aims to develop efficient formulas for bandgap estimation and design of metastructures to control vibration and noise of mechanical structures. The closed-form formulas developed can accurately estimate bandgaps, design improved bandgaps, and their broad applicability is numerically verified in various beam-type metastructures with different scales.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2021)

添加到收藏夹

Article Acoustics

Data-driven optimization of the periodic beam with multiple acoustic black holes

Meng-Xin He et al.

Summary: This paper presents a data-driven optimization study of a periodic beam with multiple acoustic black holes, demonstrating that the method significantly improves computational efficiency and provides multiple design options while revealing the mechanisms of the band gaps in the periodic beam.

JOURNAL OF SOUND AND VIBRATION (2021)

添加到收藏夹

Article Physics, Applied

Multiple topological interface states in broadband locally resonant phononic crystals

Zhoufu Zheng et al.

Summary: A one-dimensional locally resonant phononic crystal with twin resonators is designed, showing the potential for multiple topological interface states under certain conditions. This work provides guidelines for the design of low-frequency elastic topological systems.

JOURNAL OF APPLIED PHYSICS (2021)

添加到收藏夹

Article Acoustics

Complex band structure and evanescent Bloch wave propagation of periodic nested acoustic black hole phononic structure

Nansha Gao et al.

Summary: This study presents a periodic nested acoustic black hole phononic structure and discusses its complex band structures and Bloch wave propagation. The research shows that the acoustic black hole structure has positive application value in vibration reduction design.

APPLIED ACOUSTICS (2021)

添加到收藏夹

Article Acoustics

Topological phononic crystal plates with locally resonant elastic wave systems

Lingyun Yao et al.

Summary: This paper investigates the topological properties of subwavelength bands in elastic phononic crystal (PC) plate hybridized with extra local resonances, and analyzes the band-structure evolution of a topological PC plate with local resonator using finite element method (FEM). The structure is capable of producing two bandgaps in the subwavelength region, and experimental tests validate the theoretical and numerical approach to the design of topological waveguides.

APPLIED ACOUSTICS (2021)

添加到收藏夹

Article Engineering, Multidisciplinary

Broadband low-frequency vibration attenuation in 3D printed composite meta-lattice sandwich structures

Hao Li et al.

Summary: This study proposes a strategy to achieve broadband low-frequency vibration suppression by combining the design concepts of locally resonant metamaterials and lightweight lattice-truss-core sandwich structures. By designing meta-lattice sandwich panels and using 3D printing technology, remarkable vibration suppression within the low-frequency range is successfully achieved.

COMPOSITES PART B-ENGINEERING (2021)

添加到收藏夹

Article Mechanics

Broad band gaps for flexural wave manipulation in plates with embedded periodic strip acoustic black holes

Jie Deng et al.

Summary: This paper introduces a new class of phononic crystal consisting of two crossed strip ABHs to open broad and complete BGs in plates, based on the dual benefit of local resonance and Bragg scattering effect. The results show that the BGs can be modulated to very low frequencies via adjusting the ABH parameters, while maintaining the broadband characteristics.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2021)

添加到收藏夹

Article Acoustics

Complete sub-wavelength flexural wave band gaps in plates with periodic acoustic black holes

Liling Tang et al.

Summary: The study proposes a new type of plate structure containing periodically arranged double-layer ABH cells, which provide complete and omnidirectional band gaps. By adjusting ABH parameters and enhancing Bragg scattering, the band gap frequencies can be widened and lowered.

JOURNAL OF SOUND AND VIBRATION (2021)

添加到收藏夹

Article Acoustics

Low-frequency flexural wave attenuation in metamaterial sandwich beam with hourglass lattice truss core

Zhenkun Guo et al.

Summary: The band structure of flexural waves in a metamaterial sandwich beam (MSB) with hourglass lattice truss core was investigated using the transfer matrix method, and the effects of material and structural parameters on the band structures were studied. The research provides insights into modeling and controlling wave propagation in lightweight lattice sandwich beams.

WAVE MOTION (2021)

添加到收藏夹

Article Mechanics

Phononic band gaps by inertial amplification mechanisms in periodic composite sandwich beam with lattice truss cores

Jingru Li et al.

COMPOSITE STRUCTURES (2020)

添加到收藏夹

Article Acoustics

Topological edge states in phononic plates with embedded acoustic black holes

Sai Sanjit Ganti et al.

JOURNAL OF SOUND AND VIBRATION (2020)

添加到收藏夹

Review Acoustics

The acoustic black hole: A review of theory and applications

Adrien Pelat et al.

JOURNAL OF SOUND AND VIBRATION (2020)

添加到收藏夹

Article Acoustics

Study on bandgap characteristics of particle damping phononic crystal

Chiming Wang et al.

APPLIED ACOUSTICS (2020)

添加到收藏夹

Article Acoustics

Vibration and sound properties of metamaterial sandwich panels with periodically attached resonators: Simulation and experiment study

Yubao Song et al.

JOURNAL OF SOUND AND VIBRATION (2020)

添加到收藏夹

Article Engineering, Mechanical

Vibration-based structural health monitoring under changing environmental conditions using Kalman filtering

Kalil Erazo et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2019)

添加到收藏夹

Article Acoustics

On the control of the first Bragg band gap in periodic continuously corrugated beam for flexural vibration

Adrien Pelat et al.

JOURNAL OF SOUND AND VIBRATION (2019)

添加到收藏夹

Article Acoustics

Low reflection effect by 3D printed functionally graded acoustic black holes

Wei Huang et al.

JOURNAL OF SOUND AND VIBRATION (2019)

添加到收藏夹

Article Engineering, Mechanical

Gaussian expansion for the vibration analysis of plates with multiple acoustic black holes indentations

Jie Deng et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2019)

添加到收藏夹

Article Acoustics

Low-frequency elastic wave attenuation in a composite acoustic black hole beam

Nansha Gao et al.

APPLIED ACOUSTICS (2019)

添加到收藏夹

Review Engineering, Civil

Vibration attenuation in high-rise buildings to achieve system-level performance under multiple hazards

Suvash Chapain et al.

ENGINEERING STRUCTURES (2019)

添加到收藏夹

Article Engineering, Mechanical

Periodic plates with tunneled Acoustic-Black-Holes for directional band gap generation

Liling Tang et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2019)

添加到收藏夹

Article Acoustics

A 2D Daubechies wavelet model on the vibration of rectangular plates containing strip indentations with a parabolic thickness profile

Li Ma et al.

JOURNAL OF SOUND AND VIBRATION (2018)

添加到收藏夹

Article Physics, Applied

Research on low-frequency band gap property of a hybrid phononic crystal

Yake Dong et al.

MODERN PHYSICS LETTERS B (2018)

添加到收藏夹

Article Chemistry, Physical

On-chip valley topological materials for elastic wave manipulation

Mou Yan et al.

NATURE MATERIALS (2018)

添加到收藏夹

Article Physics, Applied

Two-dimensional structure-embedded acoustic lenses based on periodic acoustic black holes

Hongfei Zhu et al.

JOURNAL OF APPLIED PHYSICS (2017)

添加到收藏夹

Article Physics, Applied

Broadband locally resonant band gaps in periodic beam structures with embedded acoustic black holes

Liling Tang et al.

JOURNAL OF APPLIED PHYSICS (2017)

添加到收藏夹

Review Mechanics

A Review on Acoustic Black-Holes (ABH) and the Experimental and Numerical Study of ABH-Featured 3D Printed Beams

Bernard Mun Poh Chong et al.

INTERNATIONAL JOURNAL OF APPLIED MECHANICS (2017)

添加到收藏夹

Article Physics, Applied

Loss of acoustic black hole effect in a structure of finite size

Liling Tang et al.

APPLIED PHYSICS LETTERS (2016)

添加到收藏夹

Article Acoustics

Local resonance and Bragg bandgaps in sandwich beams containing periodically inserted resonators

B. Sharma et al.

JOURNAL OF SOUND AND VIBRATION (2016)

添加到收藏夹

Article Physics, Multidisciplinary

A new hybrid phononic crystal in low frequencies

Z. Zhang et al.

PHYSICS LETTERS A (2016)

添加到收藏夹

Article Acoustics

Numerical analysis of the vibroacoustic properties of plates with embedded grids of acoustic black holes

Stephen C. Conlon et al.

JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

Phononic thin plates with embedded acoustic black holes

Hongfei Zhu et al.

PHYSICAL REVIEW B (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

Improving the performance of structure-embedded acoustic lenses via gradient-index local inhomogeneities

H. Zhu et al.

INTERNATIONAL JOURNAL OF SMART AND NANO MATERIALS (2015)

添加到收藏夹

Article Physics, Applied

Acoustic cloaking by a near-zero-index phononic crystal

Li-Yang Zheng et al.

APPLIED PHYSICS LETTERS (2014)

添加到收藏夹

Article Acoustics

Flexural wave propagation in beams with periodically attached vibration absorbers: Band-gap behavior and band formation mechanisms

Yong Xiao et al.

JOURNAL OF SOUND AND VIBRATION (2013)

添加到收藏夹

Article Acoustics

Effect of geometrical and material imperfections on damping flexural vibrations in plates with attached wedges of power law profile

E. P. Bowyer et al.

APPLIED ACOUSTICS (2012)

添加到收藏夹

Article Physics, Applied

Flexural wave band gaps in locally resonant thin plates with periodically attached spring-mass resonators

Yong Xiao et al.

JOURNAL OF PHYSICS D-APPLIED PHYSICS (2012)

添加到收藏夹

Article Physics, Multidisciplinary

Propagation of flexural wave in periodic beam on elastic foundations

Dianlong Yu et al.

PHYSICS LETTERS A (2012)

添加到收藏夹

Article Physics, Multidisciplinary

Broadband locally resonant beams containing multiple periodic arrays of attached resonators

Yong Xiao et al.

PHYSICS LETTERS A (2012)

添加到收藏夹

Article Acoustics

Damping of flexural vibrations in rectangular plates using the acoustic black hole effect

D. J. O'Boy et al.

JOURNAL OF SOUND AND VIBRATION (2010)

添加到收藏夹

Article Physics, Applied

Locally resonant phononic woodpile: A wide band anomalous underwater acoustic absorbing material

Heng Jiang et al.

APPLIED PHYSICS LETTERS (2009)

添加到收藏夹

Article Computer Science, Artificial Intelligence

Multiobjective Optimization Problems With Complicated Pareto Sets, MOEA/D and NSGA-II

Hui Li et al.

IEEE TRANSACTIONS ON EVOLUTIONARY COMPUTATION (2009)

添加到收藏夹

Article Acoustics

Vibration reduction by using the idea of phononic crystals in a pipe-conveying fluid

Dianlong Yu et al.

JOURNAL OF SOUND AND VIBRATION (2008)

添加到收藏夹

Article Engineering, Mechanical

Discomfort from feeling vehicle vibration

M. J. Griffin

VEHICLE SYSTEM DYNAMICS (2007)

添加到收藏夹

Article Acoustics

Experimental investigation of the acoustic black hole effect for flexural waves in tapered plates

V. V. Krylov et al.

JOURNAL OF SOUND AND VIBRATION (2007)

添加到收藏夹

Article Acoustics

Acoustic 'black holes' for flexural waves as effective vibration dampers

VV Krylov et al.

JOURNAL OF SOUND AND VIBRATION (2004)

添加到收藏夹

Article Physics, Multidisciplinary

Two-dimensional locally resonant phononic crystals with binary structures

G Wang et al.

PHYSICAL REVIEW LETTERS (2004)

添加到收藏夹

Article Computer Science, Artificial Intelligence

A fast and elitist multiobjective genetic algorithm: NSGA-II

K Deb et al.

IEEE TRANSACTIONS ON EVOLUTIONARY COMPUTATION (2002)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.